Added in configuration files / scripts and cgi-bin scripts.

3 files changed, 0 insertions, 1280 deletions

diff --git a/templates/linksysata-template.lua b/templates/linksysata-template.lua
deleted file mode 100644
index ba71657..0000000
--- a/templates/linksysata-template.lua
+++ /dev/null
@@ -1,839 +0,0 @@
-<%
--- Linksys ATA Configuration File Template
-local values = ...
-server=values.device.registrar
-web_server=string.gsub(ENV['HTTP_HOST'], ":[0-9]*$", "")
-moh=values.device.musiconhold
-dialpattern="( " .. values.device.digitmap .. " )"
-
-local cid
-if values.reg1.callerid == "" then
-	cid = values.reg1.extension
-else
-	cid = values.reg1.callerid
-end
-%>
-
-<% local values = ... %>
-
-<%
-
-local function yesno ( bool )
-	if bool then
-		return "Yes"
-	else
-		return "No"
-	end
-end
-%>
-
-<flat-profile>
-
-<Restricted_Access_Domains ua="na"></Restricted_Access_Domains>
-<Enable_Web_Server ua="na">Yes</Enable_Web_Server>
-<Web_Server_Port ua="na">80</Web_Server_Port>
-<Enable_Web_Admin_Access ua="na">Yes</Enable_Web_Admin_Access>
-
-<Admin_Passwd ua="na"><%= values.device.adminpassword %></Admin_Passwd>
-
-<User_Password ua="na"><%= values.device.adminpassword %></User_Password>
-
-
-
-<DHCP ua="na">Yes</DHCP>
-<Static_IP ua="na"></Static_IP>
-<NetMask ua="na"></NetMask>
-<Gateway ua="na"></Gateway>
-
-
-
-<HostName ua="na"><% io.write(values.reg1.extension) %></HostName>
-<Domain ua="na" />
-
-<Primary_DNS ua="na"></Primary_DNS>
-<Secondary_DNS ua="na"></Secondary_DNS>
-<DNS_Server_Order ua="na">DHCP,Manual</DNS_Server_Order>
-<DNS_Query_Mode ua="na">Sequential</DNS_Query_Mode>
-
-<Syslog_Server ua="na"><%= web_server %></Syslog_Server>
-<Debug_Server ua="na"><%= web_server %></Debug_Server>
-<Debug_Level ua="na">0</Debug_Level>
-
-<Primary_NTP_Server ua="na"></Primary_NTP_Server>
-<Secondary_NTP_Server ua="na"></Secondary_NTP_Server>
-
-
-
-<Provision_Enable ua="na">Yes</Provision_Enable>
-<Resync_On_Reset ua="na">Yes</Resync_On_Reset>
-<% -- Resync at a particular time of day, not periodically. (24-hour format hhmm) %>
-<Resync_At ua="na">0200</Resync_At>
-<% -- Resync_Periodic is disabled because of using Resync_At instead %>
-<Resync_Periodic ua="na"></Resync_Periodic>
-
-<Resync_Random_Delay ua="na">10</Resync_Random_Delay>
-<Resync_Error_Retry_Delay ua="na">900</Resync_Error_Retry_Delay>
-<% -- Do not resync during a call, unless the call lasts longer than 3 hours %> 
-<Forced_Resync_Delay ua="na">10800</Forced_Resync_Delay>
-
-<Resync_From_SIP ua="na">Yes</Resync_From_SIP>
-<Resync_After_Upgrade_Attempt ua="na">Yes</Resync_After_Upgrade_Attempt>
-
-<Resync_Trigger_1 ua="na"></Resync_Trigger_1>
-
-<Resync_Fails_On_FNF>No</Resync_Fails_On_FNF>
-
-
-
-<Profile_Rule ua="na">
-http://<% io.write(web_server) %>/Linksys/$MA.xml
-</Profile_Rule>
-
-<Profile_Rule_B ua="na">
-</Profile_Rule_B>
-
-<Profile_Rule_C ua="na">
-</Profile_Rule_C>
-<Profile_Rule_D ua="na"></Profile_Rule_D>
-<Resync_Trigger_2 ua="na"></Resync_Trigger_2>
-
-<Log_Resync_Request_Msg ua="na">$PN $MAC -- Requesting resync $SCHEME://$SERVIP:$PORT$PATH</Log_Resync_Request_Msg>
-<Log_Resync_Success_Msg ua="na">$PN $MAC -- Successful resync $SCHEME://$SERVIP:$PORT$PATH</Log_Resync_Success_Msg>
-<Log_Resync_Failure_Msg ua="na">$PN $MAC -- Resync failed: $ERR</Log_Resync_Failure_Msg>
-
-<Report_Rule ua="na"></Report_Rule>
-
-
-<Upgrade_Enable ua="na">Yes</Upgrade_Enable>
-<Upgrade_Error_Retry_Delay ua="na">7200</Upgrade_Error_Retry_Delay>
-
-<Downgrade_Rev_Limit ua="na"></Downgrade_Rev_Limit>
-
-
-
-<Upgrade_Rule ua="na">
-(!5.1.6)?http://<% io.write(web_server) %>/pap2t-5-1-6.bin
-</Upgrade_Rule>
-
-
-<Log_Upgrade_Request_Msg ua="na">$PN $MAC -- Requesting upgrade $SCHEME://$SERVIP:$PORT$PATH</Log_Upgrade_Request_Msg>
-<Log_Upgrade_Success_Msg ua="na">$PN $MAC -- Successful upgrade $SCHEME://$SERVIP:$PORT$PATH -- $ERR</Log_Upgrade_Success_Msg>
-<Log_Upgrade_Failure_Msg ua="na">$PN $MAC -- Upgrade failed: $ERR</Log_Upgrade_Failure_Msg>
-
-
-
-<Max_Forward ua="na">70</Max_Forward>
-<Max_Redirection ua="na">5</Max_Redirection>
-<Max_Auth ua="na">2</Max_Auth>
-<SIP_User_Agent_Name ua="na">$MAU $VERSION</SIP_User_Agent_Name>
-<SIP_Server_Name ua="na">$MAU $VERSION</SIP_Server_Name>
-
-<SIP_Accept_Language ua="na"></SIP_Accept_Language>
-<DTMF_Relay_MIME_Type ua="na">application/dtmf-relay</DTMF_Relay_MIME_Type>
-<Hook_Flash_MIME_Type ua="na">application/hook-flash</Hook_Flash_MIME_Type>
-<Remove_Last_Reg ua="na">No</Remove_Last_Reg>
-<Use_Compact_Header ua="na">No</Use_Compact_Header>
-
-
-
-<SIP_T1 ua="na">2</SIP_T1>
-<SIP_T2 ua="na">32</SIP_T2>
-<SIP_T4 ua="na">5</SIP_T4>
-<SIP_Timer_B ua="na">6</SIP_Timer_B>
-<SIP_Timer_F ua="na">31</SIP_Timer_F>
-<SIP_Timer_H ua="na">32</SIP_Timer_H>
-<SIP_Timer_D ua="na">32</SIP_Timer_D>
-<SIP_Timer_J ua="na">32</SIP_Timer_J>
-<INVITE_Expires ua="na">240</INVITE_Expires>
-<ReINVITE_Expires ua="na">30</ReINVITE_Expires>
-<Reg_Min_Expires ua="na">1</Reg_Min_Expires>
-<Reg_Max_Expires ua="na">7200</Reg_Max_Expires>
-<Reg_Retry_Intvl ua="na">60</Reg_Retry_Intvl>
-<Reg_Retry_Long_Intvl ua="na">60</Reg_Retry_Long_Intvl>
-
-
-
-<SIT1_RSC ua="na"></SIT1_RSC>
-<SIT2_RSC ua="na"></SIT2_RSC>
-<SIT3_RSC ua="na"></SIT3_RSC>
-<SIT4_RSC ua="na"></SIT4_RSC>
-
-<Try_Backup_RSC ua="na"></Try_Backup_RSC>
-<Retry_Reg_RSC ua="na"></Retry_Reg_RSC>
-
-
-
-<RTP_Port_Min ua="na">10050</RTP_Port_Min>
-<RTP_Port_Max ua="na">16384</RTP_Port_Max>
-<Max_RTP_ICMP_Err ua="na">0</Max_RTP_ICMP_Err>
-<RTCP_Tx_Interval ua="na">5</RTCP_Tx_Interval>
-
-
-
-<NSE_Dynamic_Payload ua="na">100</NSE_Dynamic_Payload>
-<AVT_Dynamic_Payload ua="na">101</AVT_Dynamic_Payload>
-<G726r16_Dynamic_Payload ua="na">98</G726r16_Dynamic_Payload>
-<G726r24_Dynamic_Payload ua="na">97</G726r24_Dynamic_Payload>
-<G726r40_Dynamic_Payload ua="na">96</G726r40_Dynamic_Payload>
-<G729b_Dynamic_Payload ua="na">99</G729b_Dynamic_Payload>
-
-<NSE_Codec_Name ua="na">NSE</NSE_Codec_Name>
-<AVT_Codec_Name ua="na">telephone-event</AVT_Codec_Name>
-<G711u_Codec_Name ua="na">PCMU</G711u_Codec_Name>
-<G711a_Codec_Name ua="na">PCMA</G711a_Codec_Name>
-<G726r16_Codec_Name ua="na">G726-16</G726r16_Codec_Name>
-<G726r24_Codec_Name ua="na">G726-24</G726r24_Codec_Name>
-<G726r32_Codec_Name ua="na">G726-32</G726r32_Codec_Name>
-<G726r40_Codec_Name ua="na">G726-40</G726r40_Codec_Name>
-<G729a_Codec_Name ua="na">G729</G729a_Codec_Name>
-<G729b_Codec_Name ua="na">G729ab</G729b_Codec_Name>
-<G723_Codec_Name ua="na">G723</G723_Codec_Name>
-
-
-
-<Handle_VIA_received ua="na">Yes</Handle_VIA_received>
-<Handle_VIA_rport ua="na">Yes</Handle_VIA_rport>
-<Insert_VIA_received ua="na">Yes</Insert_VIA_received>
-<Insert_VIA_rport ua="na">Yes</Insert_VIA_rport>
-<Substitute_VIA_Addr ua="na">Yes</Substitute_VIA_Addr>
-<Send_Resp_To_Src_Port ua="na">No</Send_Resp_To_Src_Port>
-<STUN_Enable ua="na">No</STUN_Enable>
-<STUN_Test_Enable ua="na">No</STUN_Test_Enable>
-<STUN_Server ua="na"></STUN_Server>
-<EXT_IP ua="na"></EXT_IP>
-<EXT_RTP_Port_Min ua="na"></EXT_RTP_Port_Min>
-<NAT_Keep_Alive_Intvl ua="na">15</NAT_Keep_Alive_Intvl>
-
-
-
-		
-
-	
-
-
-<Line_Enable_1_ ua="na">Yes</Line_Enable_1_>
-
-<SAS_Enable_1_ ua="na">No</SAS_Enable_1_>
-<MOH_Server_1_ ua="na"><% io.write(moh) %></MOH_Server_1_>
-<SAS_DLG_Refresh_Intvl_1_ ua="na">30</SAS_DLG_Refresh_Intvl_1_>
-<NAT_Mapping_Enable_1_ ua="na">No</NAT_Mapping_Enable_1_>
-<SAS_Inbound_RTP_Sink_1_ ua="na"></SAS_Inbound_RTP_Sink_1_>
-
-<SIP_Port_1_ ua="na">5060</SIP_Port_1_>
-
-<NAT_Keep_Alive_Enable_1_ ua="na">No</NAT_Keep_Alive_Enable_1_>
-<EXT_SIP_Port_1_ ua="na"></EXT_SIP_Port_1_>
-<NAT_Keep_Alive_Msg_1_ ua="na">$NOTIFY</NAT_Keep_Alive_Msg_1_>
-<SIP_TOS_DiffServ_Value_1_ ua="na">0x68</SIP_TOS_DiffServ_Value_1_>
-<NAT_Keep_Alive_Dest_1_ ua="na">$PROXY</NAT_Keep_Alive_Dest_1_>
-<RTP_TOS_DiffServ_Value_1_ ua="na">0xb8</RTP_TOS_DiffServ_Value_1_>
-
-
-
-<SIP_Debug_Option_1_ ua="na"></SIP_Debug_Option_1_>
-
-<Network_Jitter_Level_1_ ua="na">very high</Network_Jitter_Level_1_>
-<Jitter_Buffer_Adjustment_1_ ua="na">disable</Jitter_Buffer_Adjustment_1_>
-<SIP_100REL_Enable_1_ ua="na">Yes</SIP_100REL_Enable_1_>
-<Blind_Attn-Xfer_Enable_1_ ua="na">Yes</Blind_Attn-Xfer_Enable_1_>
-<Auth_Resync-Reboot_1_ ua="na">No</Auth_Resync-Reboot_1_>
-<Xfer_When_Hangup_Conf_1_ ua="na">Yes</Xfer_When_Hangup_Conf_1_>
-
-
-<RTP_Log_Intvl_1_ ua="na">0</RTP_Log_Intvl_1_>
-<Restrict_Source_IP_1_ ua="na">No</Restrict_Source_IP_1_>
-
-
-
-
-<Proxy_1_ ua="na"><% io.write(server) %></Proxy_1_>
-
-<Use_Outbound_Proxy_1_ ua="na">No</Use_Outbound_Proxy_1_>
-<Outbound_Proxy_1_ ua="na"></Outbound_Proxy_1_>
-<Use_OB_Proxy_In_Dialog_1_ ua="na">Yes</Use_OB_Proxy_In_Dialog_1_>
-
-<Register_1_ ua="na">Yes</Register_1_>
-<Make_Call_Without_Reg_1_ ua="na">No</Make_Call_Without_Reg_1_>
-
-<Register_Expires_1_ ua="na">60</Register_Expires_1_>
-<Ans_Call_Without_Reg_1_ ua="na">Yes</Ans_Call_Without_Reg_1_>
-<Use_DNS_SRV_1_ ua="na">Yes</Use_DNS_SRV_1_>
-<DNS_SRV_Auto_Prefix_1_ ua="na">Yes</DNS_SRV_Auto_Prefix_1_>
-<Proxy_Fallback_Intvl_1_ ua="na">3600</Proxy_Fallback_Intvl_1_>
-<Voice_Mail_Server_1_ ua="na"></Voice_Mail_Server_1_>
-
-
-
-<Display_Name_1_ ua="na"><%= cid %></Display_Name_1_>
-<User_ID_1_ ua="na"><% io.write(values.reg1.extension) %></User_ID_1_>
-<Password_1_ ua="na"><% io.write(values.reg1.password) %></Password_1_>
-<Use_Auth_ID_1_ ua="na">No</Use_Auth_ID_1_>
-<Auth_ID_1_ ua="na"></Auth_ID_1_>
-<Mini_Certificate_1_ ua="na"></Mini_Certificate_1_>
-<SRTP_Private_Key_1_ ua="na"></SRTP_Private_Key_1_>
-
-
-
-<Call_Waiting_Serv_1_ ua="na"><%= yesno(values.services and values.services.callwaitingenable) %></Call_Waiting_Serv_1_>
-<Block_CID_Serv_1_ ua="na">No</Block_CID_Serv_1_>
-<Block_ANC_Serv_1_ ua="na">No</Block_ANC_Serv_1_>
-<Dist_Ring_Serv_1_ ua="na">Yes</Dist_Ring_Serv_1_>
-<Cfwd_All_Serv_1_ ua="na">Yes</Cfwd_All_Serv_1_>
-<Cfwd_Busy_Serv_1_ ua="na">Yes</Cfwd_Busy_Serv_1_>
-<Cfwd_No_Ans_Serv_1_ ua="na">Yes</Cfwd_No_Ans_Serv_1_>
-<Cfwd_Sel_Serv_1_ ua="na">No</Cfwd_Sel_Serv_1_>
-<Cfwd_Last_Serv_1_ ua="na">No</Cfwd_Last_Serv_1_>
-<Block_Last_Serv_1_ ua="na">No</Block_Last_Serv_1_>
-<Accept_Last_Serv_1_ ua="na">No</Accept_Last_Serv_1_>
-<DND_Serv_1_ ua="na">No</DND_Serv_1_>
-<CID_Serv_1_ ua="na">Yes</CID_Serv_1_>
-<CWCID_Serv_1_ ua="na">Yes</CWCID_Serv_1_>
-<Call_Return_Serv_1_ ua="na">No</Call_Return_Serv_1_>
-<Call_Back_Serv_1_ ua="na">Yes</Call_Back_Serv_1_>
-<Three_Way_Call_Serv_1_ ua="na">Yes</Three_Way_Call_Serv_1_>
-<Three_Way_Conf_Serv_1_ ua="na">Yes</Three_Way_Conf_Serv_1_>
-<Attn_Transfer_Serv_1_ ua="na">Yes</Attn_Transfer_Serv_1_>
-<Unattn_Transfer_Serv_1_ ua="na">Yes</Unattn_Transfer_Serv_1_>
-<MWI_Serv_1_ ua="na">Yes</MWI_Serv_1_>
-<VMWI_Serv_1_ ua="na">Yes</VMWI_Serv_1_>
-<Speed_Dial_Serv_1_ ua="na">No</Speed_Dial_Serv_1_>
-<Secure_Call_Serv_1_ ua="na">No</Secure_Call_Serv_1_>
-<Referral_Serv_1_ ua="na">No</Referral_Serv_1_>
-<Feature_Dial_Serv_1_ ua="na">Yes</Feature_Dial_Serv_1_>
-
-
-
-<Preferred_Codec_1_ ua="na">G711u</Preferred_Codec_1_>
-<Silence_Supp_Enable_1_ ua="na">No</Silence_Supp_Enable_1_>
-<Use_Pref_Codec_Only_1_ ua="na">Yes</Use_Pref_Codec_Only_1_>
-<Silence_Threshold_1_ ua="na">medium</Silence_Threshold_1_>
-<Echo_Canc_Enable_1_ ua="na">Yes</Echo_Canc_Enable_1_>
-<G729a_Enable_1_ ua="na">No</G729a_Enable_1_>
-<Echo_Canc_Adapt_Enable_1_ ua="na">Yes</Echo_Canc_Adapt_Enable_1_>
-<G723_Enable_1_ ua="na">No</G723_Enable_1_>
-<Echo_Supp_Enable_1_ ua="na">Yes</Echo_Supp_Enable_1_>
-<G726-16_Enable_1_ ua="na">No</G726-16_Enable_1_>
-<FAX_CED_Detect_Enable_1_ ua="na">Yes</FAX_CED_Detect_Enable_1_>
-<G726-24_Enable_1_ ua="na">No</G726-24_Enable_1_>
-<FAX_CNG_Detect_Enable_1_ ua="na">Yes</FAX_CNG_Detect_Enable_1_>
-<G726-32_Enable_1_ ua="na">Yes</G726-32_Enable_1_>
-<FAX_Passthru_Codec_1_ ua="na">G711u</FAX_Passthru_Codec_1_>
-<G726-40_Enable_1_ ua="na">No</G726-40_Enable_1_>
-<FAX_Codec_Symmetric_1_ ua="na">Yes</FAX_Codec_Symmetric_1_>
-<DTMF_Tx_Method_1_ ua="na">Auto</DTMF_Tx_Method_1_>
-<FAX_Passthru_Method_1_ ua="na">ReINVITE</FAX_Passthru_Method_1_>
-<Hook_Flash_Tx_Method_1_ ua="na">None</Hook_Flash_Tx_Method_1_>
-<FAX_Process_NSE_1_ ua="na">Yes</FAX_Process_NSE_1_>
-<Release_Unused_Codec_1_ ua="na">No</Release_Unused_Codec_1_>
-
-
-<Dial_Plan_1_ ua="na"><% io.write(dialpattern) %></Dial_Plan_1_>
-
-<Enable_IP_Dialing_1_ ua="na">No</Enable_IP_Dialing_1_>
-
-
-
-<Idle_Polarity_1_ ua="na">Forward</Idle_Polarity_1_>
-<Caller_Conn_Polarity_1_ ua="na">Forward</Caller_Conn_Polarity_1_>
-<Callee_Conn_Polarity_1_ ua="na">Forward</Callee_Conn_Polarity_1_>
-
-
-<%
-	if values.services and values.services.forwarding and values.reg1 then
-		local pg_t = values.reg1
-		local fwddata = {}
-
-		if pg_t.forwardallenable then
-			fwddata.all = pg_t.forwardall
-		else
-			fwddata.all = ""
-		end
-		if pg_t.forwardbusyenable then
-			fwddata.busy = pg_t.forwardbusy
-		else
-			fwddata.busy = ""
-		end
-		if pg_t.forwardnoanswerenable then
-			fwddata.noanswer = pg_t.forwardnoanswer
-			fwddata.noanswerdelay = "20"
-		else
-			fwddata.noanswer = ""
-			fwddata.noanswerdelay = ""
-		end
-%>
-<Cfwd_All_Dest_1_ ua="na"><%= fwddata.all %></Cfwd_All_Dest_1_>
-<Cfwd_Busy_Dest_1_ ua="na"><%= fwddata.busy %></Cfwd_Busy_Dest_1_>
-<Cfwd_No_Ans_Dest_1_ ua="na"><%= fwddata.noanswer %></Cfwd_No_Ans_Dest_1_>
-<Cfwd_No_Ans_Delay_1_ ua="na"><%= fwddata.noanswerdelay %></Cfwd_No_Ans_Delay_1_>
-<%
-	end
-%>
-
-
-<Cfwd_Sel1_Caller_1_ ua="na"></Cfwd_Sel1_Caller_1_>
-<Cfwd_Sel1_Dest_1_ ua="na"></Cfwd_Sel1_Dest_1_>
-<Cfwd_Sel2_Caller_1_ ua="na"></Cfwd_Sel2_Caller_1_>
-<Cfwd_Sel2_Dest_1_ ua="na"></Cfwd_Sel2_Dest_1_>
-<Cfwd_Sel3_Caller_1_ ua="na"></Cfwd_Sel3_Caller_1_>
-<Cfwd_Sel3_Dest_1_ ua="na"></Cfwd_Sel3_Dest_1_>
-<Cfwd_Sel4_Caller_1_ ua="na"></Cfwd_Sel4_Caller_1_>
-<Cfwd_Sel4_Dest_1_ ua="na"></Cfwd_Sel4_Dest_1_>
-<Cfwd_Sel5_Caller_1_ ua="na"></Cfwd_Sel5_Caller_1_>
-<Cfwd_Sel5_Dest_1_ ua="na"></Cfwd_Sel5_Dest_1_>
-<Cfwd_Sel6_Caller_1_ ua="na"></Cfwd_Sel6_Caller_1_>
-<Cfwd_Sel6_Dest_1_ ua="na"></Cfwd_Sel6_Dest_1_>
-<Cfwd_Sel7_Caller_1_ ua="na"></Cfwd_Sel7_Caller_1_>
-<Cfwd_Sel7_Dest_1_ ua="na"></Cfwd_Sel7_Dest_1_>
-<Cfwd_Sel8_Caller_1_ ua="na"></Cfwd_Sel8_Caller_1_>
-<Cfwd_Sel8_Dest_1_ ua="na"></Cfwd_Sel8_Dest_1_>
-
-<Cfwd_Last_Caller_1_ ua="na"></Cfwd_Last_Caller_1_>
-<Cfwd_Last_Dest_1_ ua="na"></Cfwd_Last_Dest_1_>
-<Block_Last_Caller_1_ ua="na"></Block_Last_Caller_1_>
-<Accept_Last_Caller_1_ ua="na"></Accept_Last_Caller_1_>
-
-
-
-<Speed_Dial_2_1_ ua="na"></Speed_Dial_2_1_>
-<Speed_Dial_3_1_ ua="na"></Speed_Dial_3_1_>
-<Speed_Dial_4_1_ ua="na"></Speed_Dial_4_1_>
-<Speed_Dial_5_1_ ua="na"></Speed_Dial_5_1_>
-<Speed_Dial_6_1_ ua="na"></Speed_Dial_6_1_>
-<Speed_Dial_7_1_ ua="na"></Speed_Dial_7_1_>
-<Speed_Dial_8_1_ ua="na"></Speed_Dial_8_1_>
-<Speed_Dial_9_1_ ua="na"></Speed_Dial_9_1_>
-
-
-
-
-<Block_CID_Setting_1_ ua="na">No</Block_CID_Setting_1_>
-<Block_ANC_Setting_1_ ua="na">No</Block_ANC_Setting_1_>
-<DND_Setting_1_ ua="na">No</DND_Setting_1_>
-<CID_Setting_1_ ua="na">Yes</CID_Setting_1_>
-<CWCID_Setting_1_ ua="na">Yes</CWCID_Setting_1_>
-<Dist_Ring_Setting_1_ ua="na">Yes</Dist_Ring_Setting_1_>
-<Secure_Call_Setting_1_ ua="na">No</Secure_Call_Setting_1_>
-
-<Message_Waiting_1_ ua="na">No</Message_Waiting_1_>
-
-
-
-<Ring1_Caller_1_ ua="na"></Ring1_Caller_1_>
-<Ring2_Caller_1_ ua="na"></Ring2_Caller_1_>
-<Ring3_Caller_1_ ua="na"></Ring3_Caller_1_>
-<Ring4_Caller_1_ ua="na"></Ring4_Caller_1_>
-<Ring5_Caller_1_ ua="na"></Ring5_Caller_1_>
-<Ring6_Caller_1_ ua="na"></Ring6_Caller_1_>
-<Ring7_Caller_1_ ua="na"></Ring7_Caller_1_>
-<Ring8_Caller_1_ ua="na"></Ring8_Caller_1_>
-
-
-
-<Default_Ring_1_ ua="na">1</Default_Ring_1_>
-<Default_CWT_1_ ua="na">1</Default_CWT_1_>
-<Hold_Reminder_Ring_1_ ua="na">8</Hold_Reminder_Ring_1_>
-<Call_Back_Ring_1_ ua="na"></Call_Back_Ring_1_>
-
-<Cfwd_Ring_Splash_Len_1_ ua="na">0</Cfwd_Ring_Splash_Len_1_>
-<Cblk_Ring_Splash_Len_1_ ua="na">0</Cblk_Ring_Splash_Len_1_>
-<VMWI_Ring_Splash_Len_1_ ua="na">0</VMWI_Ring_Splash_Len_1_>
-<VMWI_Ring_Policy_1_ ua="na">New VM Available</VMWI_Ring_Policy_1_>
-<Ring_On_No_New_VM_1_ ua="na">No</Ring_On_No_New_VM_1_>
-
-	
-
-
-<Line_Enable_2_ ua="na">No</Line_Enable_2_>
-
-<SAS_Enable_2_ ua="na">No</SAS_Enable_2_>
-<MOH_Server_2_ ua="na"></MOH_Server_2_>
-<SAS_DLG_Refresh_Intvl_2_ ua="na">30</SAS_DLG_Refresh_Intvl_2_>
-<NAT_Mapping_Enable_2_ ua="na">No</NAT_Mapping_Enable_2_>
-<SAS_Inbound_RTP_Sink_2_ ua="na"></SAS_Inbound_RTP_Sink_2_>
-
-<SIP_Port_2_ ua="na">5060</SIP_Port_2_>
-
-<NAT_Keep_Alive_Enable_2_ ua="na">Yes</NAT_Keep_Alive_Enable_2_>
-<EXT_SIP_Port_2_ ua="na"></EXT_SIP_Port_2_>
-<NAT_Keep_Alive_Msg_2_ ua="na">$NOTIFY</NAT_Keep_Alive_Msg_2_>
-<SIP_TOS_DiffServ_Value_2_ ua="na">0x68</SIP_TOS_DiffServ_Value_2_>
-<NAT_Keep_Alive_Dest_2_ ua="na">$PROXY</NAT_Keep_Alive_Dest_2_>
-<RTP_TOS_DiffServ_Value_2_ ua="na">0xb8</RTP_TOS_DiffServ_Value_2_>
-
-
-
-<SIP_Debug_Option_2_ ua="na"></SIP_Debug_Option_2_>
-
-
-
-<Network_Jitter_Level_2_ ua="na">high</Network_Jitter_Level_2_>
-<SIP_100REL_Enable_2_ ua="na">No</SIP_100REL_Enable_2_>
-<Blind_Attn-Xfer_Enable_2_ ua="na">No</Blind_Attn-Xfer_Enable_2_>
-<Auth_Resync-Reboot_2_ ua="na">No</Auth_Resync-Reboot_2_>
-<Xfer_When_Hangup_Conf_2_ ua="na">No</Xfer_When_Hangup_Conf_2_>
-
-
-<RTP_Log_Intvl_2_ ua="na">0</RTP_Log_Intvl_2_>
-<Restrict_Source_IP_2_ ua="na">No</Restrict_Source_IP_2_>
-
-
-
-
-<Proxy_2_ ua="na"></Proxy_2_>
-
-<Use_Outbound_Proxy_2_ ua="na">No</Use_Outbound_Proxy_2_>
-<Outbound_Proxy_2_ ua="na"></Outbound_Proxy_2_>
-<Use_OB_Proxy_In_Dialog_2_ ua="na">Yes</Use_OB_Proxy_In_Dialog_2_>
-
-<Register_2_ ua="na">Yes</Register_2_>
-<Make_Call_Without_Reg_2_ ua="na">No</Make_Call_Without_Reg_2_>
-
-<Register_Expires_2_ ua="na">60</Register_Expires_2_>
-<Ans_Call_Without_Reg_2_ ua="na">Yes</Ans_Call_Without_Reg_2_>
-<Use_DNS_SRV_2_ ua="na">No</Use_DNS_SRV_2_>
-<DNS_SRV_Auto_Prefix_2_ ua="na">No</DNS_SRV_Auto_Prefix_2_>
-<Proxy_Fallback_Intvl_2_ ua="na">3600</Proxy_Fallback_Intvl_2_>
-<Voice_Mail_Server_2_ ua="na">2147483647</Voice_Mail_Server_2_>
-
-
-
-<Display_Name_2_ ua="na"></Display_Name_2_>
-<User_ID_2_ ua="na"></User_ID_2_>
-<Password_2_ ua="na"></Password_2_>
-<Use_Auth_ID_2_ ua="na">No</Use_Auth_ID_2_>
-<Auth_ID_2_ ua="na"></Auth_ID_2_>
-<Mini_Certificate_2_ ua="na"></Mini_Certificate_2_>
-<SRTP_Private_Key_2_ ua="na"></SRTP_Private_Key_2_>
-
-
-
-<Call_Waiting_Serv_2_ ua="na">Yes</Call_Waiting_Serv_2_>
-<Block_CID_Serv_2_ ua="na">Yes</Block_CID_Serv_2_>
-<Block_ANC_Serv_2_ ua="na">No</Block_ANC_Serv_2_>
-<Dist_Ring_Serv_2_ ua="na">Yes</Dist_Ring_Serv_2_>
-<Cfwd_All_Serv_2_ ua="na">No</Cfwd_All_Serv_2_>
-<Cfwd_Busy_Serv_2_ ua="na">No</Cfwd_Busy_Serv_2_>
-<Cfwd_No_Ans_Serv_2_ ua="na">No</Cfwd_No_Ans_Serv_2_>
-<Cfwd_Sel_Serv_2_ ua="na">No</Cfwd_Sel_Serv_2_>
-<Cfwd_Last_Serv_2_ ua="na">No</Cfwd_Last_Serv_2_>
-<Block_Last_Serv_2_ ua="na">No</Block_Last_Serv_2_>
-<Accept_Last_Serv_2_ ua="na">No</Accept_Last_Serv_2_>
-<DND_Serv_2_ ua="na">No</DND_Serv_2_>
-<CID_Serv_2_ ua="na">Yes</CID_Serv_2_>
-<CWCID_Serv_2_ ua="na">Yes</CWCID_Serv_2_>
-<Call_Return_Serv_2_ ua="na">No</Call_Return_Serv_2_>
-<Call_Back_Serv_2_ ua="na">Yes</Call_Back_Serv_2_>
-<Three_Way_Call_Serv_2_ ua="na">Yes</Three_Way_Call_Serv_2_>
-<Three_Way_Conf_Serv_2_ ua="na">Yes</Three_Way_Conf_Serv_2_>
-<Attn_Transfer_Serv_2_ ua="na">Yes</Attn_Transfer_Serv_2_>
-<Unattn_Transfer_Serv_2_ ua="na">Yes</Unattn_Transfer_Serv_2_>
-<MWI_Serv_2_ ua="na">Yes</MWI_Serv_2_>
-<VMWI_Serv_2_ ua="na">Yes</VMWI_Serv_2_>
-<Speed_Dial_Serv_2_ ua="na">No</Speed_Dial_Serv_2_>
-<Secure_Call_Serv_2_ ua="na">No</Secure_Call_Serv_2_>
-<Referral_Serv_2_ ua="na">No</Referral_Serv_2_>
-<Feature_Dial_Serv_2_ ua="na">Yes</Feature_Dial_Serv_2_>
-
-
-
-<Preferred_Codec_2_ ua="na">G711u</Preferred_Codec_2_>
-<Silence_Supp_Enable_2_ ua="na">No</Silence_Supp_Enable_2_>
-<Use_Pref_Codec_Only_2_ ua="na">Yes</Use_Pref_Codec_Only_2_>
-<Silence_Threshold_2_ ua="na">medium</Silence_Threshold_2_>
-<Echo_Canc_Enable_2_ ua="na">Yes</Echo_Canc_Enable_2_>
-<G729a_Enable_2_ ua="na">Yes</G729a_Enable_2_>
-<Echo_Canc_Adapt_Enable_2_ ua="na">Yes</Echo_Canc_Adapt_Enable_2_>
-<G723_Enable_2_ ua="na">No</G723_Enable_2_>
-<Echo_Supp_Enable_2_ ua="na">Yes</Echo_Supp_Enable_2_>
-<G726-16_Enable_2_ ua="na">No</G726-16_Enable_2_>
-<FAX_CED_Detect_Enable_2_ ua="na">Yes</FAX_CED_Detect_Enable_2_>
-<G726-24_Enable_2_ ua="na">No</G726-24_Enable_2_>
-<FAX_CNG_Detect_Enable_2_ ua="na">Yes</FAX_CNG_Detect_Enable_2_>
-<G726-32_Enable_2_ ua="na">Yes</G726-32_Enable_2_>
-<FAX_Passthru_Codec_2_ ua="na">G711u</FAX_Passthru_Codec_2_>
-<G726-40_Enable_2_ ua="na">No</G726-40_Enable_2_>
-<FAX_Codec_Symmetric_2_ ua="na">Yes</FAX_Codec_Symmetric_2_>
-<DTMF_Tx_Method_2_ ua="na">Auto</DTMF_Tx_Method_2_>
-<FAX_Passthru_Method_2_ ua="na">ReINVITE</FAX_Passthru_Method_2_>
-<Hook_Flash_Tx_Method_2_ ua="na">None</Hook_Flash_Tx_Method_2_>
-<FAX_Process_NSE_2_ ua="na">Yes</FAX_Process_NSE_2_>
-<Release_Unused_Codec_2_ ua="na">Yes</Release_Unused_Codec_2_>
-
-
-
-<Dial_Plan_2_ ua="na">(&lt;:1123&gt;[2-9]xxxxxxS0|&lt;411:18003733411&gt;|*xx|[369]11S0|0|00|011[2-9]x.|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)</Dial_Plan_2_>
-
-<Enable_IP_Dialing_2_ ua="na">No</Enable_IP_Dialing_2_>
-
-
-
-<Idle_Polarity_2_ ua="na">Forward</Idle_Polarity_2_>
-<Caller_Conn_Polarity_2_ ua="na">Forward</Caller_Conn_Polarity_2_>
-<Callee_Conn_Polarity_2_ ua="na">Forward</Callee_Conn_Polarity_2_>
-
-
-
-<Cfwd_All_Dest_2_ ua="na"></Cfwd_All_Dest_2_>
-<Cfwd_Busy_Dest_2_ ua="na"></Cfwd_Busy_Dest_2_>
-<Cfwd_No_Ans_Dest_2_ ua="na"></Cfwd_No_Ans_Dest_2_>
-<Cfwd_No_Ans_Delay_2_ ua="na"></Cfwd_No_Ans_Delay_2_>
-
-
-
-<Cfwd_Sel1_Caller_2_ ua="na"></Cfwd_Sel1_Caller_2_>
-<Cfwd_Sel1_Dest_2_ ua="na"></Cfwd_Sel1_Dest_2_>
-<Cfwd_Sel2_Caller_2_ ua="na"></Cfwd_Sel2_Caller_2_>
-<Cfwd_Sel2_Dest_2_ ua="na"></Cfwd_Sel2_Dest_2_>
-<Cfwd_Sel3_Caller_2_ ua="na"></Cfwd_Sel3_Caller_2_>
-<Cfwd_Sel3_Dest_2_ ua="na"></Cfwd_Sel3_Dest_2_>
-<Cfwd_Sel4_Caller_2_ ua="na"></Cfwd_Sel4_Caller_2_>
-<Cfwd_Sel4_Dest_2_ ua="na"></Cfwd_Sel4_Dest_2_>
-<Cfwd_Sel5_Caller_2_ ua="na"></Cfwd_Sel5_Caller_2_>
-<Cfwd_Sel5_Dest_2_ ua="na"></Cfwd_Sel5_Dest_2_>
-<Cfwd_Sel6_Caller_2_ ua="na"></Cfwd_Sel6_Caller_2_>
-<Cfwd_Sel6_Dest_2_ ua="na"></Cfwd_Sel6_Dest_2_>
-<Cfwd_Sel7_Caller_2_ ua="na"></Cfwd_Sel7_Caller_2_>
-<Cfwd_Sel7_Dest_2_ ua="na"></Cfwd_Sel7_Dest_2_>
-<Cfwd_Sel8_Caller_2_ ua="na"></Cfwd_Sel8_Caller_2_>
-<Cfwd_Sel8_Dest_2_ ua="na"></Cfwd_Sel8_Dest_2_>
-
-<Cfwd_Last_Caller_2_ ua="na"></Cfwd_Last_Caller_2_>
-<Cfwd_Last_Dest_2_ ua="na"></Cfwd_Last_Dest_2_>
-<Block_Last_Caller_2_ ua="na"></Block_Last_Caller_2_>
-<Accept_Last_Caller_2_ ua="na"></Accept_Last_Caller_2_>
-
-
-
-<Speed_Dial_2_2_ ua="na"></Speed_Dial_2_2_>
-<Speed_Dial_3_2_ ua="na"></Speed_Dial_3_2_>
-<Speed_Dial_4_2_ ua="na"></Speed_Dial_4_2_>
-<Speed_Dial_5_2_ ua="na"></Speed_Dial_5_2_>
-<Speed_Dial_6_2_ ua="na"></Speed_Dial_6_2_>
-<Speed_Dial_7_2_ ua="na"></Speed_Dial_7_2_>
-<Speed_Dial_8_2_ ua="na"></Speed_Dial_8_2_>
-<Speed_Dial_9_2_ ua="na"></Speed_Dial_9_2_>
-
-
-
-
-<Block_CID_Setting_2_ ua="na">No</Block_CID_Setting_2_>
-<Block_ANC_Setting_2_ ua="na">No</Block_ANC_Setting_2_>
-<DND_Setting_2_ ua="na">No</DND_Setting_2_>
-<CID_Setting_2_ ua="na">Yes</CID_Setting_2_>
-<CWCID_Setting_2_ ua="na">Yes</CWCID_Setting_2_>
-<Dist_Ring_Setting_2_ ua="na">Yes</Dist_Ring_Setting_2_>
-<Secure_Call_Setting_2_ ua="na">No</Secure_Call_Setting_2_>
-
-<Message_Waiting_2_ ua="na"/>
-
-
-
-<Ring1_Caller_2_ ua="na"></Ring1_Caller_2_>
-<Ring2_Caller_2_ ua="na"></Ring2_Caller_2_>
-<Ring3_Caller_2_ ua="na"></Ring3_Caller_2_>
-<Ring4_Caller_2_ ua="na"></Ring4_Caller_2_>
-<Ring5_Caller_2_ ua="na"></Ring5_Caller_2_>
-<Ring6_Caller_2_ ua="na"></Ring6_Caller_2_>
-<Ring7_Caller_2_ ua="na"></Ring7_Caller_2_>
-<Ring8_Caller_2_ ua="na"></Ring8_Caller_2_>
-
-
-
-<Default_Ring_2_ ua="na">1</Default_Ring_2_>
-<Default_CWT_2_ ua="na">1</Default_CWT_2_>
-<Hold_Reminder_Ring_2_ ua="na">8</Hold_Reminder_Ring_2_>
-<Call_Back_Ring_2_ ua="na"></Call_Back_Ring_2_>
-
-<Cfwd_Ring_Splash_Len_2_ ua="na">0</Cfwd_Ring_Splash_Len_2_>
-<Cblk_Ring_Splash_Len_2_ ua="na">0</Cblk_Ring_Splash_Len_2_>
-<VMWI_Ring_Splash_Len_2_ ua="na">0</VMWI_Ring_Splash_Len_2_>
-<VMWI_Ring_Policy_2_ ua="na">New VM Available</VMWI_Ring_Policy_2_>
-<Ring_On_No_New_VM_2_ ua="na">No</Ring_On_No_New_VM_2_>
-
-
-<CW_Setting_1_ ua="na">1</CW_Setting_1_>
-<CW_Setting_2_ ua="na">1</CW_Setting_2_>
-
-<RTP_Packet_Size ua="na">.020</RTP_Packet_Size>
-
-
-<Dial_Tone ua="na">350@-19,440@-19;10(*/0/1+2)</Dial_Tone>
-<Second_Dial_Tone ua="na">350@-19,440@-19;10(*/0/1+2)</Second_Dial_Tone>
-<Outside_Dial_Tone ua="na">350@-19,440@-19;10(*/0/1+2)</Outside_Dial_Tone>
-<Prompt_Tone ua="na">350@-19,440@-19;10(*/0/1+2)</Prompt_Tone>
-<Busy_Tone ua="na">480@-19,620@-19;10(.5/.5/1+2)</Busy_Tone>
-<Reorder_Tone ua="na">480@-19,620@-19;10(.25/.25/1+2)</Reorder_Tone>
-<Off_Hook_Warning_Tone ua="na">480@-10,620@0;10(.125/.125/1+2)</Off_Hook_Warning_Tone>
-<Ring_Back_Tone ua="na">440@-19,480@-19;*(2/4/1+2)</Ring_Back_Tone>
-<Confirm_Tone ua="na">600@-16;1(.25/.25/1)</Confirm_Tone>
-<SIT1_Tone ua="na">985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)</SIT1_Tone>
-<SIT2_Tone ua="na">914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)</SIT2_Tone>
-<SIT3_Tone ua="na">914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)</SIT3_Tone>
-<SIT4_Tone ua="na">985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)</SIT4_Tone>
-<MWI_Dial_Tone ua="na">350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)</MWI_Dial_Tone>
-<Cfwd_Dial_Tone ua="na">350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)</Cfwd_Dial_Tone>
-<Holding_Tone ua="na">600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)</Holding_Tone>
-<Conference_Tone ua="na">350@-19;20(.1/.1/1,.1/9.7/1)</Conference_Tone>
-<Secure_Call_Indication_Tone ua="na">397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)</Secure_Call_Indication_Tone>
-
-
-
-<Ring1_Cadence ua="na">60(2/4)</Ring1_Cadence>
-<Ring2_Cadence ua="na">60(.3/.2,1/.2,.3/4)</Ring2_Cadence>
-<Ring3_Cadence ua="na">60(.8/.4,.8/4)</Ring3_Cadence>
-<Ring4_Cadence ua="na">60(.4/.2,.3/.2,.8/4)</Ring4_Cadence>
-<Ring5_Cadence ua="na">60(.2/.2,.2/.2,.2/.2,1/4)</Ring5_Cadence>
-<Ring6_Cadence ua="na">60(.2/.4,.2/.4,.2/4)</Ring6_Cadence>
-<Ring7_Cadence ua="na">60(.4/.2,.4/.2,.4/4)</Ring7_Cadence>
-<Ring8_Cadence ua="na">60(0.25/9.75)</Ring8_Cadence>
-
-
-
-<CWT1_Cadence ua="na">30(.3/3.7)</CWT1_Cadence>
-<CWT2_Cadence ua="na">30(.1/.1, .1/9.7)</CWT2_Cadence>
-<CWT3_Cadence ua="na">30(.1/.1, .3/.1, .1/9.3)</CWT3_Cadence>
-<CWT4_Cadence ua="na">30(.1/.1,.1/.1,.1/9.5)</CWT4_Cadence>
-<CWT5_Cadence ua="na">30(.3/.1,.1/.1,.3/9.1)</CWT5_Cadence>
-<CWT6_Cadence ua="na">30(.1/.1,.3/.2,.3/9.1)</CWT6_Cadence>
-<CWT7_Cadence ua="na">30(.3/.1,.3/.1,.1/9.1)</CWT7_Cadence>
-<CWT8_Cadence ua="na">2.3(.3/2)</CWT8_Cadence>
-
-
-
-<Ring1_Name ua="na">Bellcore-dr1</Ring1_Name>
-<Ring2_Name ua="na">Bellcore-dr2</Ring2_Name>
-<Ring3_Name ua="na">Bellcore-dr3</Ring3_Name>
-<Ring4_Name ua="na">Bellcore-dr4</Ring4_Name>
-<Ring5_Name ua="na">Bellcore-dr5</Ring5_Name>
-<Ring6_Name ua="na">Bellcore-dr6</Ring6_Name>
-<Ring7_Name ua="na">Bellcore-dr7</Ring7_Name>
-<Ring8_Name ua="na">Bellcore-dr8</Ring8_Name>
-
-
-
-<Ring_Waveform ua="na">Sinusoid</Ring_Waveform>
-<Ring_Frequency ua="na">20</Ring_Frequency>
-<Ring_Voltage ua="na">90</Ring_Voltage>
-<CWT_Frequency ua="na">440@-10</CWT_Frequency>
-<Synchronized_Ring ua="na">Yes</Synchronized_Ring>
-
-
-
-<Hook_Flash_Timer_Min ua="na">.1</Hook_Flash_Timer_Min>
-<Hook_Flash_Timer_Max ua="na">1.0</Hook_Flash_Timer_Max>
-<Callee_On_Hook_Delay ua="na">0</Callee_On_Hook_Delay>
-<Reorder_Delay ua="na">0</Reorder_Delay>
-<Call_Back_Expires ua="na">4500</Call_Back_Expires>
-<Call_Back_Retry_Intvl ua="na">90</Call_Back_Retry_Intvl>
-<Call_Back_Delay ua="na">2</Call_Back_Delay>
-<VMWI_Refresh_Intvl ua="na">0</VMWI_Refresh_Intvl>
-<Interdigit_Long_Timer ua="na">8</Interdigit_Long_Timer>
-<Interdigit_Short_Timer ua="na">4</Interdigit_Short_Timer>
-<CPC_Delay ua="na">2</CPC_Delay>
-<CPC_Duration ua="na">0</CPC_Duration>
-
-
-
-<Call_Return_Code ua="na"></Call_Return_Code>
-<Blind_Transfer_Code ua="na">*98</Blind_Transfer_Code>
-<Call_Back_Act_Code ua="na"></Call_Back_Act_Code>
-<Call_Back_Deact_Code ua="na"></Call_Back_Deact_Code>
-<Cfwd_All_Act_Code ua="na"></Cfwd_All_Act_Code>
-<Cfwd_All_Deact_Code ua="na"></Cfwd_All_Deact_Code>
-<Cfwd_Busy_Act_Code ua="na"></Cfwd_Busy_Act_Code>
-<Cfwd_Busy_Deact_Code ua="na"></Cfwd_Busy_Deact_Code>
-<Cfwd_No_Ans_Act_Code ua="na"></Cfwd_No_Ans_Act_Code>
-<Cfwd_No_Ans_Deact_Code ua="na"></Cfwd_No_Ans_Deact_Code>
-<Cfwd_Last_Act_Code ua="na"></Cfwd_Last_Act_Code>
-<Cfwd_Last_Deact_Code ua="na"></Cfwd_Last_Deact_Code>
-<Block_Last_Act_Code ua="na"></Block_Last_Act_Code>
-<Block_Last_Deact_Code ua="na"></Block_Last_Deact_Code>
-<Accept_Last_Act_Code ua="na"></Accept_Last_Act_Code>
-<Accept_Last_Deact_Code ua="na"></Accept_Last_Deact_Code>
-<CW_Act_Code ua="na"></CW_Act_Code>
-<CW_Deact_Code ua="na"></CW_Deact_Code>
-<CW_Per_Call_Act_Code ua="na"></CW_Per_Call_Act_Code>
-<CW_Per_Call_Deact_Code ua="na"></CW_Per_Call_Deact_Code>
-<Block_CID_Act_Code ua="na"></Block_CID_Act_Code>
-<Block_CID_Deact_Code ua="na"></Block_CID_Deact_Code>
-<Block_CID_Per_Call_Act_Code ua="na"></Block_CID_Per_Call_Act_Code>
-<Block_CID_Per_Call_Deact_Code ua="na"></Block_CID_Per_Call_Deact_Code>
-<Block_ANC_Act_Code ua="na"></Block_ANC_Act_Code>
-<Block_ANC_Deact_Code ua="na"></Block_ANC_Deact_Code>
-<DND_Act_Code ua="na"></DND_Act_Code>
-<DND_Deact_Code ua="na"></DND_Deact_Code>
-<CID_Act_Code ua="na"></CID_Act_Code>
-<CID_Deact_Code ua="na"></CID_Deact_Code>
-<CWCID_Act_Code ua="na"></CWCID_Act_Code>
-<CWCID_Deact_Code ua="na"></CWCID_Deact_Code>
-<Dist_Ring_Act_Code ua="na"></Dist_Ring_Act_Code>
-<Dist_Ring_Deact_Code ua="na"></Dist_Ring_Deact_Code>
-<Speed_Dial_Act_Code ua="na"></Speed_Dial_Act_Code>
-<Secure_All_Call_Act_Code ua="na"></Secure_All_Call_Act_Code>
-<Secure_No_Call_Act_Code ua="na"></Secure_No_Call_Act_Code>
-<Secure_One_Call_Act_Code ua="na"></Secure_One_Call_Act_Code>
-<Secure_One_Call_Deact_Code ua="na"></Secure_One_Call_Deact_Code>
-<Conference_Act_Code ua="na"></Conference_Act_Code>
-<Attn-Xfer_Act_Code ua="na"></Attn-Xfer_Act_Code>
-<Referral_Services_Codes ua="na"></Referral_Services_Codes>
-<Feature_Dial_Services_Codes ua="na"></Feature_Dial_Services_Codes>
-
-
-
-
-<Prefer_G711u_Code ua="na"></Prefer_G711u_Code>
-<Force_G711u_Code ua="na"></Force_G711u_Code>
-<Prefer_G711a_Code ua="na"></Prefer_G711a_Code>
-<Force_G711a_Code ua="na"></Force_G711a_Code>
-<Prefer_G723_Code ua="na"></Prefer_G723_Code>
-<Force_G723_Code ua="na"></Force_G723_Code>
-<Prefer_G726r16_Code ua="na"></Prefer_G726r16_Code>
-<Force_G726r16_Code ua="na"></Force_G726r16_Code>
-<Prefer_G726r24_Code ua="na"></Prefer_G726r24_Code>
-<Force_G726r24_Code ua="na"></Force_G726r24_Code>
-<Prefer_G726r32_Code ua="na"></Prefer_G726r32_Code>
-<Force_G726r32_Code ua="na"></Force_G726r32_Code>
-<Prefer_G726r40_Code ua="na"></Prefer_G726r40_Code>
-<Force_G726r40_Code ua="na"></Force_G726r40_Code>
-<Prefer_G729a_Code ua="na"></Prefer_G729a_Code>
-<Force_G729a_Code ua="na"></Force_G729a_Code>
-
-<Modem_Line_Toggle_Code ua="na">*99</Modem_Line_Toggle_Code>
-
-
-<Set_Local_Date__mm_dd_ ua="na"/>
-<Set_Local_Time__HH_mm_ ua="na"/>
-
-<Time_Zone ua="na">
-
-
-GMT-05:00
-</Time_Zone>
-
-<Daylight_Saving_Time_Rule ua="na">
-start=3/8/7/2:0:0;end=11/1/7/2:0:0;save=1
-</Daylight_Saving_Time_Rule>
-
-<FXS_Port_Impedance ua="na">
-600</FXS_Port_Impedance>
-
-<FXS_Port_Input_Gain ua="na">-6</FXS_Port_Input_Gain>
-<FXS_Port_Output_Gain ua="na">-3</FXS_Port_Output_Gain>
-<DTMF_Playback_Level ua="na">-16</DTMF_Playback_Level>
-<DTMF_Playback_Length ua="na">.1</DTMF_Playback_Length>
-<Detect_ABCD ua="na">Yes</Detect_ABCD>
-<Playback_ABCD ua="na">Yes</Playback_ABCD>
-<Caller_ID_Method ua="na">Bellcore(N.Amer,China)</Caller_ID_Method>
-<FXS_Port_Power_Limit ua="na">5</FXS_Port_Power_Limit>
-
-<More_Echo_Suppression ua="na">Yes</More_Echo_Suppression>
-
-<Protect_IVR_FactoryReset ua="na">Yes</Protect_IVR_FactoryReset>
-
-</flat-profile>
-
-<%
--- DEBUGGING
---require("session")
---io.write(session.serialize("values", values))
-%>
diff --git a/templates/polycom-template.lua b/templates/polycom-template.lua
deleted file mode 100644
index 5ed35a3..0000000
--- a/templates/polycom-template.lua
+++ /dev/null
@@ -1,346 +0,0 @@
-<?xml version="1.0" standalone="yes"?>
-
-<%
--- Polycom Configuration File Template
--- We use single quotes to avoid escaping XML's double quotes
-
--- It is important that the first line be the XML declaration
-
---[[
-	Implemented parameters:
-		values = {
-			device = {
-				adminpassword
-				digitmap
-				digitmaptimeout
-				homepage
-				musiconhold
-				pcportenable
-				registrar
-				sntpserver
-				timezone
-				urldialingenable
-			}
-	 		regX (where X is a number 1-34) = {
-				extension  = EXTEN
-				password = string
-				forwardall = EXTEN
-				forwardallenable = boolean
-				forwardbusy = EXTEN (allow URI?)
-				forwardbusyenable = boolean
-				forwardnoanswer = EXTEN
-				forwardnoanswerenable = boolean
-			}
-			-- Assuming that services will not be nil
-			services = {
-				callhistoryenable = boolean
-				callwaitingenable = boolean
-				forwarding = boolean
-				hotlinedestination = string
-				hotlineenable = boolean
-				mailbox = string
-				speeddialenable = boolean
-			}
---]]
-%>
-
-<dynamicConfig
-
-<% -- GLOBAL OPTIONS %>
-
-<% --- From features.cfg %>
-<% --TODO: Do we want to enable locking? %>
-<% --phoneLock.enabled="1" %>
-<% --feature.autoLocalHold="1" -- trying default for now%>
-feature.callPark.enabled="1"
-feature.directedCallPickup.enabled="1"
-feature.enhancedFeatureKeys.enabled="1"
-feature.groupCallPickup.enabled="1"
-feature.messaging.enabled="1"
-<% -- Management of buddies, and own status %>
-feature.presence.enabled="1"
-<% -- Run-time downloading of ringers %>
-feature.ringDownload.enabled="1"
-<% -- Create DND softkey button except on SPIP650 %>
-softkey.1.enable="1"
-softkey.1.enable.SPIP650="0"
-softkey.1.label="DND"
-softkey.1.action="$FDoNotDisturb$"
-softkey.1.use.idle="1"
-softkey.1.use.active="1"
-softkey.1.use.alerting="1"
-
-<% --- From sip-interop.cfg %>
-<% -- Allow user to set Do Not Disturb (DND) per-registration %>
-call.donotdisturb.perReg="1"
-<% -- When a conference is put on hold, other parties continue to talk %>
-call.localConferenceCallHold="1"
-<% -- Disallow transfers during the proceeding state of a consultation call %>
-voIpProt.SIP.allowTransferOnProceeding="0"
-<% -- TODO needed???%>
-<% --voIpProt.SIP.CID.sourcePreference="" %>
-<% -- Send 486 (SIP Busy Here) when 'Reject' is pressed during a ringing call %>
-voIpProt.SIP.use486forReject="1"
-<% -- Set phone's requested registration period in seconds %>
-voIpProt.server.1.expires="60"
-voIpProt.server.2.expires="60"
-<% -- Set RFC 2833 payload to 101 instead of 127 for interop. with Linksys ATA %>
-tone.dtmf.rfc2833Payload="101"
-
-
-<% --- From site.cfg %>
-<% -- Allow the use of device.xxx options (Admin Guide A-30) %>
-device.set="1"
-<% -- Override default user password of '123' see Admin Guide 4-103 %>
-<% --  only used for phone locking and to protect redundant 'Reboot' option %>
-device.auth.localUserPassword=""
-device.auth.localUserPassword.set="1"
-<% -- Attempt to determine VLAN ID and negotiate power through LLDP %>
-device.net.lldpEnabled="1"
-<% -- Apply option configured in device.net.lldpEnabled (Admin Guide A-30) %>
-device.net.lldpEnabled.set="1"
-<% -- Phone should provide reorder tone when dialed digits do not match digit map %>
-dialplan.impossibleMatchHandling="1"
-<% -- Do not treat a trailing '#' as a 'Send' operation %>
-dialplan.removeEndOfDial="0"
-<% -- Automatic periodic polling of provisioning server for upgrades %>
-prov.polling.enabled="1"
-<% -- Polling time of day hh:mm. %>
-prov.polling.time="02:00"
-<% -- Do not reject RTP packets arriving from a non-SDP-negotiated IP address %>
-<% --  Needed for some ATAs that do provide bad SDP in transfers to MOH  %>
-tcpIpApp.port.rtp.filterByIp="0"
-<% -- Reject RTP packets arriving from a non-SDP-negotiated port %>
-<% --  To provide some security despite disabling filterByIp above.t %>
-tcpIpApp.port.rtp.filterByPort="1"
-<% -- Headset preferred over speakerphone after first use, until disabled %>
-up.headsetMode="1"
-<% -- Intensity of LCD backlight when phone is idle. 0 = off. %>
-up.backlight.idleIntensity="0"
-<% -- Receive volume of handset remembered between calls %>
-voice.volume.persist.handset="1"
-<% -- Receive volume of headset remembered between calls %>
-voice.volume.persist.headset="1"
-
-
-
-
-
-<% local values = ... %>
-
-<% 
-local function xml_attr (t, v)
-if v ~= nil then
-	-- v could be a string, boolean, or a number
-	io.write(table.concat(t, '.') .. '="' .. tostring(v) .. '"\n')
-end
-end 
-%>
-
-<%
-
-xml_attr({ 'voIpProt.server.1.address' }, values.device.registrar)
-xml_attr({ 'mb.main.home' }, values.device.homepage)
-xml_attr({ 'voIpProt.SIP.musicOnHold.uri' }, values.device.musiconhold)
-xml_attr({ 'dialplan.digitmap.timeOut' }, values.device.digitmaptimeout)
-xml_attr({ 'feature.urlDialing.enabled' }, values.device.urldialingenable)
-
-if not values.device.pcportenable then
-	-- set mode to '-1' which disables it
-	xml_attr({ 'device.net.etherModePC' }, '-1')
-	-- apply settings in 'device' parameter above
-	xml_attr({ 'device.net.etherModePC.set' }, '1')
-end
-
--- Override the default admin password of '456'
-if values.device.adminpassword then
-	xml_attr({ 'device.auth.localAdminPassword' }, values.device.adminpassword)
-	xml_attr({ 'device.auth.localAdminPassword.set' }, true)
-end
-
----[=[
--- Handle SNTP and Time Zone parameters
---   See http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html
---     TZ variable, with no leading colon
---   Syntax: stdoffset[dst[offset][,start[/time],end[/time]]]
---   Examples: 'GMT0' 'EST5EDT,M3.2.0,M11.1.0' '<GMT+5>5'
-
---  we can assume that values.device is not nil
---    since values.device.template is this file
-if values.device.sntpserver then
-	xml_attr({ 'tcpIpApp.sntp.address' }, values.device.sntpserver)
-end
-
-
---  Parse time zone variable
-require('posixtz')
-local tz = posixtz.parse(values.device.timezone)
-
-if tz then
-
-	-- convert POSIX sign (W of GMT is '+') to Polycom (E of GMT is '+')
-	xml_attr({'tcpIpApp.sntp.gmtOffset'}, -1 * tz.offset.total)
-
-
-
-	local function dstrule ( pos )
-		local dstprefix = 'tcpIpApp.sntp.daylightSavings'
-		local t = tz.dst[pos]
-	
-		-- Handle explicit hour for DST change
-		--  (Polycom doesn't implement explicit min or sec)
-		--  (Polycom DST implementation assumes DST change is 1 hour)
-		if t.hour then
-			xml_attr({ dstprefix, pos, 'time' }, t.hour)
-		end
-
-		if t.day then
-			-- there may be two of next line, Polycom uses first
-			xml_attr({ dstprefix, 'fixedDayEnable' }, true)
-			xml_attr({ dstprefix, pos, 'month' }, t.month)
-			xml_attr({ dstprefix, pos, 'date' }, t.day)
-		else
-				
-			-- there may be two of next line, Polycom uses first
-			xml_attr({ dstprefix, 'fixedDayEnable' }, false)
-			xml_attr({ dstprefix, pos, 'month' }, t.month)
-
-			-- POSIX weekday is between 0 (Sun) and 6 (Sat)
-			-- Polycom dayOfWeek is 1=Sun, 7=Sat
-			xml_attr({ dstprefix, pos, 'dayOfWeek' }, tonumber(t.weekday) + 1)
-			
-			-- POSIX week from 1 to 5, where 1st,2nd..4th, and 5=last
-			if t.week == '5' then
-				xml_attr({ dstprefix, pos, 'dayOfWeek.lastInMonth' }, true)
-			else
-				-- Polycom uses 1, 8, 15, 22 for 1st, 2nd... 4th
-				local d = 7 * ( tonumber(t.week) - 1 ) + 1
-				xml_attr({ dstprefix, pos, 'date' }, d)
-			end
-		end
-
-	end
-	
-	if tz.dst then
-		xml_attr({'tcpIpApp.sntp.daylightSavings.enable'}, true)
-
-		dstrule('start')
-		dstrule('stop')
-	else
-		xml_attr({'tcpIpApp.sntp.daylightSavings.enable'}, false)
-	end
-end
-
---]=]
-
-
--- Check 'services' params
-local enable = {}
-enable.forwarding = false
-enable.hotline = false
-
-if values.services then
-	-- set variables so that we don't have to test values.services again
-	if not values.services.callhistoryenable then
-		xml_attr({ 'feature.callList.enabled' }, '0')	
-	end
-	if not values.services.callwaitingenable then
-		-- only allow one call per line key
-		xml_attr({ 'call.callsPerLineKey' }, '1' )
-	end
-	if values.services.forwarding then
-		enable.forwarding = true
-	end
-	if values.services.hotlineenable then
-		enable.hotline = true
-		-- Set phone to replace any dialed digits with the hotline destination instead
-		xml_attr({ 'dialplan.digitmap' }, 'R[#*0123456789].R'..values.services.hotlinedestination..'R')
-		xml_attr({ 'dialplan.applyToUserDial' }, '1')
-		xml_attr({ 'dialplan.applyToUserSend' }, '1')
-	else
-		xml_attr({ 'dialplan.digitmap' }, values.device.digitmap)
-	end
-	if values.services.mailbox then
-		xml_attr({ 'msg.mwi.1.subscribe' }, values.services.mailbox)
-		xml_attr({ 'msg.mwi.1.callBackMode' }, "contact")
-		xml_attr({ 'msg.mwi.1.callBack' }, string.gsub(values.services.mailbox, "@.*", ""))
-	end
-	-- set local contact directory to be readonly or readwrite
-	if not values.services.speeddialenable then
-		xml_attr({ 'dir.local.contacts.maxNum' }, 0)
-	end
-end		
-
-
--- Loop through Parameter Groups looking for 'reg' params
-for pg, pg_t in pairs(values) do
-
--- Is it of the form regX ?
-local num = string.match(pg, 'reg(%d+)')
-if num then
-
-
-	-- set Hotline on all possible registrations if it is configured
-	if enable.hotline then
-		local d = values.services.hotlinedestination
-		if d then
-			xml_attr({ 'call.autoOffHook', num, 'enabled' }, '1')
-			xml_attr({ 'call.autoOffHook', num, 'protocol' }, 'SIP')
-			xml_attr({ 'call.autoOffHook', num, 'contact' }, d)
-		end
-	end
-
-	-- user part of From URI
-	xml_attr({ 'reg', num, 'address' }, pg_t.extension)
-	-- SIP authentication parameters
-	xml_attr({ 'reg', num, 'auth.userId' }, pg_t.extension)
-	xml_attr({ 'reg', num, 'auth.password' }, pg_t.password)
-	-- Caller ID string
-	xml_attr({ 'reg', num, 'displayName' }, pg_t.callerid)
-
-
-	-- From Admin_Guide_UCS_v3.3.0:
-	--  "The phone has a flexible call forward/diversion feature for each registration. In all cases, a call will only be diverted if a non-Null contact has been configured."
-	if enable.forwarding then
-		-- Although not documented,
-		-- Polycom phones send special options for
-		--  'forward all calls', namely:
-		--  reg.x.fwdContact and reg.x.fwdStatus
-		
-		-- set forwardall as defined
-		xml_attr({ 'reg', num, 'fwdStatus' }, pg_t.forwardallenable)
-		xml_attr({ 'reg', num, 'fwdContact' }, pg_t.forwardall)
-
-		-- set forwardnoanswer as defined
-		xml_attr({ 'reg', num, 'fwd.noanswer.status' }, pg_t.forwardnoanswerenable)
-		xml_attr({ 'reg', num, 'fwd.noanswer.contact' }, pg_t.forwardnoanswer)
-		xml_attr({ 'reg', num, 'fwd.noanswer.ringCount' }, '3')
-		-- we do not use 'divert.noanswer.x.timeout',
-		--  because it limits maximum rings *even when* forward-on-noanswer disabled
-
-		-- set forwardbusy on DND and on busy, as defined
-		xml_attr({ 'reg', num, 'fwd.busy.status' }, pg_t.forwardbusyenable)
-		xml_attr({ 'divert.dnd', num, 'enabled' }, pg_t.forwardbusyenable)
-		xml_attr({ 'reg', num, 'fwd.busy.contact' }, pg_t.forwardbusy)
-		xml_attr({ 'divert.dnd', num, 'contact' }, pg_t.forwardbusy)
-
-	else  -- forwarding is not enabled
-		-- disable the soft-key menu for forwarding
-		xml_attr({ 'divert.fwd', num, 'enabled' }, '0')
-	end
-
-
-end
-
-end
-
-%>
-
-/>
-
-<%
--- DEBUGGING
---require("session")
---local log, err = io.open("/root/polycom-template.log", "a")
---log:write(session.serialize("values", values))
-%>
diff --git a/templates/snom-template.lua b/templates/snom-template.lua
deleted file mode 100644
index 7ac4542..0000000
--- a/templates/snom-template.lua
+++ /dev/null
@@ -1,95 +0,0 @@
-<%
-local values = ...
-
-local function xml_elem(t,v,p,i)
-  local elem = t
-  if i == nil then
-    if v == true then
-      io.write('<'..elem..' perm="'..p..'">on</'..elem..'>\n')
-    elseif v == false then
-      io.write('<'..elem..' perm="'..p..'">off</'..elem..'>\n')
-    else
-      io.write('<'..elem..' perm="'..p..'">'..tostring(v)..'</'..elem..'>\n')
-    end
-  else
-    if v == true then
-      io.write('<'..elem..' idx="'..i..'" perm="'..p..'">on</'..elem..'>\n')
-    elseif v == false then
-      io.write('<'..elem..' idx="'..i..'" perm="'..p..'">off</'..elem..'>\n')
-    else
-      io.write('<'..elem..' idx="'..i..'" perm="'..p..'">'..tostring(v)..'</'..elem..'>\n')
-    end
-  end
-end
-%>
-
-<?xml version="1.0" encoding="utf-8"?>
-<settings>
-  <phone-settings>
-    <admin_mode_password perm="R"><% io.write(values.device.adminpassword) %></admin_mode_password>
-    <codec_tos perm="RW">184</codec_tos>
-    <% if values.device.dateformat == string.lower("mm/dd/yyyy") then 
-         io.write('<date_us_format perm="RW">on</date_us_format>')
-       else
-         io.write('<date_us_format perm="RW">off</date_us_format>')
-       end %>
-    <dhcp perm="RW">on</dhcp>
-    <dim_timer perm="R">60</dim_timer>
-    <% xml_elem('eth_pc',values.device.pcportenable,'R') %>
-    <http_pass perm="R"><% io.write(values.device.adminpassword) %></http_pass>
-    <http_user perm="R">admin</http_user>
-    <ignore_security_warning perm="R">on</ignore_security_warning>
-    <% xml_elem('language',values.device.uilanguage,'RW') %>
-    <ntp_server perm="RW"><% io.write(values.device.sntpserver) %></ntp_server>
-    <publish_presence perm="R">off</publish_presence>
-    <refer_brackets perm="R">on</refer_brackets>
-    <settings_refresh_timer perm="RW">7200</settings_refresh_timer>
-    <signaling_tos perm="RW">184</signaling_tos>
-    <% xml_elem('time_24_format',values.device.timeformat24h,'RW') %>
-    <!--<timezone perm="RW">ITA+1</timezone>  http://wiki.snom.com/Settings/timezone -->
-    <!--<tone_scheme perm="RW">ITA</tone_scheme>  http://wiki.snom.com/wiki/index.php/Settings/tone_scheme -->
-    <update_policy perm="R">auto_update</update_policy>
-    <use_hidden_tags perm="RW">off</use_hidden_tags>
-    <%
-for pg, pg_t in pairs(values) do
-
-  -- Is it of the form regX ?
-  local num = string.match(pg, 'reg(%d+)')
-  if num then
-    if pg_t.extension ~= "" then
-      xml_elem('record_dialed_calls', pg_t.callhistoryenable, 'R', num)
-      xml_elem('record_missed_calls', pg_t.callhistoryenable, 'R', num)
-      xml_elem('record_received_calls', pg_t.callhistoryenable, 'R', num)
-      -- SNOMs do not support per-line forwarding
-      xml_elem('redirect_allways',pg_t.forwardallenable,'RW')
-      xml_elem('redirect_number',pg_t.forwardall,'RW')
-      xml_elem('redirect_on_busy',pg_t.forwardbusyenable,'RW')
-      xml_elem('redirect_busy_number',pg_t.forwardbusy,'RW')
-      xml_elem('redirect_on_timeout',pg_t.forwardnoanswerenable,'RW')
-      xml_elem('redirect_time_number',pg_t.forwardnoanswer,'RW')
-      xml_elem('redirect_time','20','RW') 
-      xml_elem('retry_after_failed_subscribe', '30', 'R', num)
-      xml_elem('user_active', 'on', 'RW', num )
-      xml_elem('user_host', values.device.registrar, 'R', num )
-      xml_elem('user_hold_inactive', 'off', 'R', num)
-      xml_elem('user_moh', values.device.musiconhold, 'R', num)
-      xml_elem('user_name', pg_t.extension, 'R', num)
-      xml_elem('user_outbound', values.device.registrar, 'R', num)
-      xml_elem('user_pass', pg_t.password, 'R', num)
-      xml_elem('user_publish_presence_bootup', 'off', 'R', num)
-      xml_elem('user_ringer', 'Ringer'..pg_t.ringtone, '!', num)
-      xml_elem('user_shared_line',pg_t.sharedlineenable, 'R', num) 
-      xml_elem('user_srtp', 'off', 'R', num)
-      xml_elem('user_subscription_expiry', '120', 'R', num)		-- by default SNOMs re-register after *half* of this time have passed
-      -- Caller ID string
-      if string.len(pg_t.callerid) == 0 then
-        xml_elem( 'user_realname', pg_t.extension,'R', num)
-      else
-        xml_elem( 'user_realname', pg_t.callerid,'R', num)
-      end
-    end
-  end
-end
-    %>
-  </phone-settings>
-</settings>