testing/quicktun: added init script and config file

1 files changed, 47 insertions, 0 deletions

diff --git a/testing/quicktun/quicktun.conf b/testing/quicktun/quicktun.conf
new file mode 100644
index 0000000000..6b839e80c5
--- /dev/null
+++ b/testing/quicktun/quicktun.conf
@@ -0,0 +1,47 @@
+# To run multiple quicktun instances, copy this file to /etc/quicktun/example.conf,
+# create a symlink /etc/init.d/quicktun.example -> quicktun
+# and initialize the tunnel by issuing: rc-service quicktun.example start
+
+# interface name
+#export INTERFACE=
+
+# set to 1 to operate in tun (IP), unset or 0 (recent versions only) for tap (Ethernet) mode
+#export TUN_MODE=0
+
+# set to 1 to include packet information header in wire packets, must be set on both sides if
+# used; set to 2 to automatically add the packet information header for cross-platform compatibility
+# (also compatible with USE_PI=0), some (BSD) kernels need USE_PI to be enabled for IPv6 support
+#export USE_PI=0
+
+# IP address or hostname of the remote end (use 0.0.0.0 for a floating/dynamic remote endpoint)
+#export REMOTE_ADDRESS=0.0.0.0
+
+# IP address or hostname of the local end, optional
+#export LOCAL_ADDRESS=
+
+# local UDP port, optional, defaults to 2998
+#export LOCAL_PORT=2998
+
+# remote UDP port, optional, defaults to LOCAL_PORT
+#export REMOTE_PORT=${LOCAL_PORT}
+
+# allows the remote address and port to change when properly encrypted packets are received
+#export REMOTE_FLOAT=
+
+# run specified command or script after the tunnel device has been opened
+#export TUN_UP_SCRIPT=
+
+# drop privileges and change user and group IDs to specified username after setting up the tunnel
+export SETUID=quicktun
+
+# nacl0, nacltai and salty (encrypted) protocols only:
+#export PRIVATE_KEY= # local secret key in hexadecimal form (not needed for raw protocol)
+#export PUBLIC_KEY= # remote public key in hexadecimal form (not needed for raw protocol)
+#export PRIVATE_KEY_FILE= # file containing local secret key in binary or hexadecimal form (not needed for raw protocol)
+
+# nacltai (encrypted) protocol only:
+# allowed time window for first received packet in seconds (positive number allows packets from history)
+#export TIME_WINDOW=
+
+# the protocol to use, one of "raw", "nacl0" and "nacltai"
+#export PROTOCOL=raw