diff options
Diffstat (limited to 'community/owncloud/fpm-pool.conf')
| -rw-r--r-- | community/owncloud/fpm-pool.conf | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/community/owncloud/fpm-pool.conf b/community/owncloud/fpm-pool.conf new file mode 100644 index 0000000000..57db4968c2 --- /dev/null +++ b/community/owncloud/fpm-pool.conf @@ -0,0 +1,183 @@ +[global] +; Error log file +; Default Value: log/php-fpm.log +error_log = /var/log/owncloud/php-fpm.log + +; Log level +; Possible Values: alert, error, warning, notice, debug +; Default Value: notice +log_level = warning + +; If this number of child processes exit with SIGSEGV or SIGBUS within the time +; interval set by emergency_restart_interval then FPM will restart. A value +; of '0' means 'Off'. +; Default Value: 0 +emergency_restart_threshold = 10 + +; Interval of time used by emergency_restart_interval to determine when +; a graceful restart will be initiated. This can be useful to work around +; accidental corruptions in an accelerator's shared memory. +; Available Units: s(econds), m(inutes), h(ours), or d(ays) +; Default Unit: seconds +; Default Value: 0 +emergency_restart_interval = 1m + +; Time limit for child processes to wait for a reaction on signals from master. +; Available units: s(econds), m(inutes), h(ours), or d(ays) +; Default Unit: seconds +; Default Value: 0 +process_control_timeout = 10s + + +[owncloud] +; The address on which to accept FastCGI requests. +; Valid syntaxes are: +; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on +; a specific port; +; 'port' - to listen on a TCP socket to all addresses on a +; specific port; +; '/path/to/unix/socket' - to listen on a unix socket (the path is *not* +; relative to chroot!) +; Note: This value is mandatory. +listen = /run/owncloud/fastcgi.sock + +; Set permissions for unix socket, if one is used. In Linux, read/write +; permissions must be set in order to allow connections from a web server. Many +; BSD-derived systems allow connections regardless of permissions. +; Default Values: user and group are set as the running user +; mode is set to 0666 +listen.mode = 0660 + +; Choose how the process manager will control the number of child processes. +; Possible Values: +; static ... a fixed number of child processes. +; dynamic ... the number of child processes are set dynamically. +; ondemand ... no children are created at startup; children will be forked +; when new requests will connect. +; Note: This value is mandatory. +pm = ondemand + +; The number of child processes to be created when pm is set to 'static' and the +; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. +; This value sets the limit on the number of simultaneous requests that will be +; served. +; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' +; Note: This value is mandatory. +pm.max_children = 15 + +; The number of seconds after which an idle process will be killed. +; Note: Used only when pm is set to 'ondemand' +; Default Value: 10s +pm.process_idle_timeout = 120s + +; The number of requests each child process should execute before respawning. +; This can be useful to work around memory leaks in 3rd party libraries. For +; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. +; Default Value: 0 +pm.max_requests = 500 + +; The URI to view the FPM status page. If this value is not set, no URI will be +; recognized as a status page. +; Note: The value must start with a leading slash (/). The value can be +; anything, but it may not be a good idea to use the .php extension or it +; may conflict with a real PHP file. +; Default Value: not set +pm.status_path = + +; The ping URI to call the monitoring page of FPM. If this value is not set, no +; URI will be recognized as a ping page. This could be used to test from outside +; that FPM is alive and responding, or to +; - create a graph of FPM availability (rrd or such); +; - remove a server from a group if it is not responding (load balancing); +; - trigger alerts for the operating team (24/7). +; Note: The value must start with a leading slash (/). The value can be +; anything, but it may not be a good idea to use the .php extension or it +; may conflict with a real PHP file. +; Default Value: not set +ping.path = /ping + +; The timeout for serving a single request after which the worker process will +; be killed. This option should be used when the 'max_execution_time' ini option +; does not stop script execution for some reason. A value of '0' means 'off'. +; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) +; Default Value: 0 +;request_terminate_timeout = 0 + +; The timeout for serving a single request after which a PHP backtrace will be +; dumped to the 'slowlog' file. A value of '0s' means 'off'. +; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) +; Default Value: 0 +;request_slowlog_timeout = 0 + +; The log file for slow requests +; Default Value: not set +; Note: slowlog is mandatory if request_slowlog_timeout is set +; Note: the path is *not* relative to chroot. +;slowlog = /var/log/owncloud/php-fpm.slow.log + +; Redirect worker stdout and stderr into main error log. If not set, stdout and +; stderr will be redirected to /dev/null according to FastCGI specs. +; Note: on highloaded environement, this can cause some delay in the page +; process time (several ms). +; Default Value: no +;catch_workers_output = yes + +; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from +; the current environment. +; Default Value: clean env +env[PATH] = /usr/bin:/bin + +; Additional php.ini defines, specific to this pool of workers. These settings +; overwrite the values previously defined in the php.ini. The directives are the +; same as the PHP SAPI: +; php_value/php_flag - you can set classic ini defines which can +; be overwritten from PHP call 'ini_set'. +; php_admin_value/php_admin_flag - these directives won't be overwritten by +; PHP call 'ini_set' +; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. +; +; Defining 'extension' will load the corresponding shared extension from +; extension_dir. Defining 'disable_functions' or 'disable_classes' will not +; overwrite previously defined php.ini values, but will append the new value +; instead. +; +; Note: path INI options can be relative and will be expanded with the prefix +; (pool, global or /usr/lib/php5.3) + +; Allow HTTP file uploads. +php_admin_flag[file_uploads] = true + +; Maximal size of a file that can be uploaded via web interface. +php_admin_value[memory_limit] = 512M +php_admin_value[post_max_size] = 513M +php_admin_value[upload_max_filesize] = 513M + +; Where to store temporary files. +php_admin_value[session.save_path] = /var/tmp/owncloud +php_admin_value[sys_temp_dir] = /var/tmp/owncloud +php_admin_value[upload_tmp_dir] = /var/tmp/owncloud + +; Log errors to specified file. +php_admin_value[error_log] = /var/log/owncloud/php.error.log + +; OPcache error_log file name. Empty string assumes "stderr" +php_admin_value[opcache.error_log] = /var/log/owncloud/php.error.log + +; Output buffering is a mechanism for controlling how much output data +; (excluding headers and cookies) PHP should keep internally before pushing that +; data to the client. If your application's output exceeds this setting, PHP +; will send that data in chunks of roughly the size you specify. +; This must be disabled for ownCloud. +php_admin_flag[output_buffering] = false + +; Overload(replace) single byte functions by mbstring functions. +; This must be disabled for ownCloud. +php_admin_flag[mbstring.func_overload] = false + +; Never populate the $HTTP_RAW_POST_DATA variable. +; http://php.net/always-populate-raw-post-data +php_admin_value[always_populate_raw_post_data] = -1 + +; Disable certain functions for security reasons. +; http://php.net/disable-functions +php_admin_value[disable_functions] = exec,passthru,shell_exec,system,proc_open,curl_multi_exec,show_source |