diff options
Diffstat (limited to 'core/ppp')
| -rw-r--r-- | core/ppp/APKBUILD | 44 | ||||
| -rw-r--r-- | core/ppp/ip-down | 4 | ||||
| -rw-r--r-- | core/ppp/ip-up | 4 | ||||
| -rw-r--r-- | core/ppp/options | 352 | ||||
| -rw-r--r-- | core/ppp/plog | 7 | ||||
| -rw-r--r-- | core/ppp/poff | 103 | ||||
| -rw-r--r-- | core/ppp/pon | 32 | ||||
| -rw-r--r-- | core/ppp/pon.1 | 121 |
8 files changed, 0 insertions, 667 deletions
diff --git a/core/ppp/APKBUILD b/core/ppp/APKBUILD deleted file mode 100644 index c50ea10c0a..0000000000 --- a/core/ppp/APKBUILD +++ /dev/null @@ -1,44 +0,0 @@ -# Maintainer: Natanael Copa <ncopa@alpinelinux.org> -pkgname=ppp -pkgver=2.4.4 -pkgrel=0 -pkgdesc="A daemon which implements the PPP protocol for dial-up networking" -url="http://www.samba.org/ppp/" -license="custom:GPL/BSD" -depends="uclibc libpcap" -makedepends="libpcap-dev" -subpackages="$pkgname-dev $pkgname-doc" -source="ftp://ftp.samba.org/pub/$pkgname/$pkgname-$pkgver.tar.gz - options - pon - poff - plog - pon.1 - ip-up - ip-down" - -build () { - cd "$srcdir"/$pkgname-$pkgver - ./configure --prefix=/usr - make COPTS="$CFLAGS" || return 1 - make INSTROOT="$pkgdir" install - - install -D -m644 "$srcdir"/options "$pkgdir"/etc/ppp/options - install -D -m755 "$srcdir"/ip-up "$pkgdir"/etc/ppp/ip-up - install -D -m755 "$srcdir"/ip-down "$pkgdir"/etc/ppp/ip-down - install -D -m755 "$srcdir"/pon "$pkgdir"/usr/bin/pon - install -D -m755 "$srcdir"/poff "$pkgdir"/usr/bin/poff - install -D -m755 "$srcdir"/plog "$pkgdir"/usr/sbin/plog - install -D -m600 etc.ppp/pap-secrets "$pkgdir"/etc/ppp/pap-secrets - install -D -m600 etc.ppp/chap-secrets "$pkgdir"/etc/ppp/chap-secrets - install -D -m644 "$srcdir"/pon.1 "$pkgdir"/usr/share/man/man1/pon.1 - mkdir -p "$pkgdir"/etc/ppp/peers -} -md5sums="183800762e266132218b204dfb428d29 ppp-2.4.4.tar.gz -7a9259a8f038073eeea7e4552ff1849f options -48c024f73a80c8b69c4def22f86902cc pon -2d811f8470ccdea3b8c4505a438483e9 poff -86cdaf133f7a79fb464f02d83afc7734 plog -44cc662ba9aa61dd9add3ddd4c5ded57 pon.1 -fac0c773490371ea673f4be0977a230f ip-up -a88b40b1bf91eb5cca3762b7195e4fe2 ip-down" diff --git a/core/ppp/ip-down b/core/ppp/ip-down deleted file mode 100644 index 3a88c496b8..0000000000 --- a/core/ppp/ip-down +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/sh -# -# This script is run by pppd after the connection has ended. -# diff --git a/core/ppp/ip-up b/core/ppp/ip-up deleted file mode 100644 index 57e09c0047..0000000000 --- a/core/ppp/ip-up +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/sh -# -# This script is run by pppd when there's a successful ppp connection. -# diff --git a/core/ppp/options b/core/ppp/options deleted file mode 100644 index 63691842c9..0000000000 --- a/core/ppp/options +++ /dev/null @@ -1,352 +0,0 @@ -# /etc/ppp/options -# -# Originally created by Jim Knoble <jmknoble@mercury.interpath.net> -# Modified for Debian by alvar Bray <alvar@meiko.co.uk> -# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org> -# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org> -# -# To quickly see what options are active in this file, use this command: -# egrep -v '#|^ *$' /etc/ppp/options - -# Specify which DNS Servers the incoming Win95 or WinNT Connection should use -# Two Servers can be remotely configured -# ms-dns 192.168.1.1 -# ms-dns 192.168.1.2 - -# Specify which WINS Servers the incoming connection Win95 or WinNT should use -# ms-wins 192.168.1.50 -# ms-wins 192.168.1.51 - -# Run the executable or shell command specified after pppd has -# terminated the link. This script could, for example, issue commands -# to the modem to cause it to hang up if hardware modem control signals -# were not available. -#disconnect "chat -- \d+++\d\c OK ath0 OK" - -# async character map -- 32-bit hex; each bit is a character -# that needs to be escaped for pppd to receive it. 0x00000001 -# represents '\x01', and 0x80000000 represents '\x1f'. -asyncmap 0 - -# Require the peer to authenticate itself before allowing network -# packets to be sent or received. -# Please do not disable this setting. It is expected to be standard in -# future releases of pppd. Use the call option (see manpage) to disable -# authentication for specific peers. -auth - -# Use hardware flow control (i.e. RTS/CTS) to control the flow of data -# on the serial port. -crtscts - -# Use software flow control (i.e. XON/XOFF) to control the flow of data -# on the serial port. -#xonxoff - -# Specifies that certain characters should be escaped on transmission -# (regardless of whether the peer requests them to be escaped with its -# async control character map). The characters to be escaped are -# specified as a list of hex numbers separated by commas. Note that -# almost any character can be specified for the escape option, unlike -# the asyncmap option which only allows control characters to be -# specified. The characters which may not be escaped are those with hex -# values 0x20 - 0x3f or 0x5e. -#escape 11,13,ff - -# Don't use the modem control lines. -#local - -# Specifies that pppd should use a UUCP-style lock on the serial device -# to ensure exclusive access to the device. -lock - -# Don't show the passwords when logging the contents of PAP packets. -# This is the default. -hide-password - -# When logging the contents of PAP packets, this option causes pppd to -# show the password string in the log message. -#show-password - -# Use the modem control lines. On Ultrix, this option implies hardware -# flow control, as for the crtscts option. (This option is not fully -# implemented.) -modem - -# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd -# will ask the peer to send packets of no more than <n> bytes. The -# minimum MRU value is 128. The default MRU value is 1500. A value of -# 296 is recommended for slow links (40 bytes for TCP/IP header + 256 -# bytes of data). -#mru 542 - -# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot" -# notation (e.g. 255.255.255.0). -#netmask 255.255.255.0 - -# Disables the default behaviour when no local IP address is specified, -# which is to determine (if possible) the local IP address from the -# hostname. With this option, the peer will have to supply the local IP -# address during IPCP negotiation (unless it specified explicitly on the -# command line or in an options file). -#noipdefault - -# Enables the "passive" option in the LCP. With this option, pppd will -# attempt to initiate a connection; if no reply is received from the -# peer, pppd will then just wait passively for a valid LCP packet from -# the peer (instead of exiting, as it does without this option). -#passive - -# With this option, pppd will not transmit LCP packets to initiate a -# connection until a valid LCP packet is received from the peer (as for -# the "passive" option with old versions of pppd). -#silent - -# Don't request or allow negotiation of any options for LCP and IPCP -# (use default values). -#-all - -# Disable Address/Control compression negotiation (use default, i.e. -# address/control field disabled). -#-ac - -# Disable asyncmap negotiation (use the default asyncmap, i.e. escape -# all control characters). -#-am - -# Don't fork to become a background process (otherwise pppd will do so -# if a serial device is specified). -#-detach - -# Disable IP address negotiation (with this option, the remote IP -# address must be specified with an option on the command line or in -# an options file). -#-ip - -# Disable IPCP negotiation and IP communication. This option should -# only be required if the peer is buggy and gets confused by requests -# from pppd for IPCP negotiation. -#noip - -# Disable magic number negotiation. With this option, pppd cannot -# detect a looped-back line. -#-mn - -# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e. -# 1500). -#-mru - -# Disable protocol field compression negotiation (use default, i.e. -# protocol field compression disabled). -#-pc - -# Require the peer to authenticate itself using PAP. -#+pap - -# Don't agree to authenticate using PAP. -#-pap - -# Require the peer to authenticate itself using CHAP [Cryptographic -# Handshake Authentication Protocol] authentication. -#+chap - -# Don't agree to authenticate using CHAP. -#-chap - -# Disable negotiation of Van Jacobson style IP header compression (use -# default, i.e. no compression). -#-vj - -# Increase debugging level (same as -d). If this option is given, pppd -# will log the contents of all control packets sent or received in a -# readable form. The packets are logged through syslog with facility -# daemon and level debug. This information can be directed to a file by -# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If -# pppd is compiled with extra debugging enabled, it will log messages -# using facility local2 instead of daemon). -#debug - -# Append the domain name <d> to the local host name for authentication -# purposes. For example, if gethostname() returns the name porsche, -# but the fully qualified domain name is porsche.Quotron.COM, you would -# use the domain option to set the domain name to Quotron.COM. -#domain <d> - -# Enable debugging code in the kernel-level PPP driver. The argument n -# is a number which is the sum of the following values: 1 to enable -# general debug messages, 2 to request that the contents of received -# packets be printed, and 4 to request that the contents of transmitted -# packets be printed. -#kdebug n - -# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer -# requests a smaller value via MRU negotiation, pppd will request that -# the kernel networking code send data packets of no more than n bytes -# through the PPP network interface. -#mtu <n> - -# Set the name of the local system for authentication purposes to <n>. -# This is a privileged option. With this option, pppd will use lines in the -# secrets files which have <n> as the second field when looking for a -# secret to use in authenticating the peer. In addition, unless overridden -# with the user option, <n> will be used as the name to send to the peer -# when authenticating the local system to the peer. (Note that pppd does -# not append the domain name to <n>.) -#name <n> - -# Enforce the use of the hostname as the name of the local system for -# authentication purposes (overrides the name option). -#usehostname - -# Set the assumed name of the remote system for authentication purposes -# to <n>. -#remotename <n> - -# Add an entry to this system's ARP [Address Resolution Protocol] -# table with the IP address of the peer and the Ethernet address of this -# system. -proxyarp - -# Use the system password database for authenticating the peer using -# PAP. Note: mgetty already provides this option. If this is specified -# then dialin from users using a script under Linux to fire up ppp wont work. -# login - -# If this option is given, pppd will send an LCP echo-request frame to the -# peer every n seconds. Normally the peer should respond to the echo-request -# by sending an echo-reply. This option can be used with the -# lcp-echo-failure option to detect that the peer is no longer connected. -lcp-echo-interval 30 - -# If this option is given, pppd will presume the peer to be dead if n -# LCP echo-requests are sent without receiving a valid LCP echo-reply. -# If this happens, pppd will terminate the connection. Use of this -# option requires a non-zero value for the lcp-echo-interval parameter. -# This option can be used to enable pppd to terminate after the physical -# connection has been broken (e.g., the modem has hung up) in -# situations where no hardware modem control lines are available. -lcp-echo-failure 4 - -# Set the LCP restart interval (retransmission timeout) to <n> seconds -# (default 3). -#lcp-restart <n> - -# Set the maximum number of LCP terminate-request transmissions to <n> -# (default 3). -#lcp-max-terminate <n> - -# Set the maximum number of LCP configure-request transmissions to <n> -# (default 10). -#lcp-max-configure <n> - -# Set the maximum number of LCP configure-NAKs returned before starting -# to send configure-Rejects instead to <n> (default 10). -#lcp-max-failure <n> - -# Set the IPCP restart interval (retransmission timeout) to <n> -# seconds (default 3). -#ipcp-restart <n> - -# Set the maximum number of IPCP terminate-request transmissions to <n> -# (default 3). -#ipcp-max-terminate <n> - -# Set the maximum number of IPCP configure-request transmissions to <n> -# (default 10). -#ipcp-max-configure <n> - -# Set the maximum number of IPCP configure-NAKs returned before starting -# to send configure-Rejects instead to <n> (default 10). -#ipcp-max-failure <n> - -# Set the PAP restart interval (retransmission timeout) to <n> seconds -# (default 3). -#pap-restart <n> - -# Set the maximum number of PAP authenticate-request transmissions to -# <n> (default 10). -#pap-max-authreq <n> - -# Set the maximum time that pppd will wait for the peer to authenticate -# itself with PAP to <n> seconds (0 means no limit). -#pap-timeout <n> - -# Set the CHAP restart interval (retransmission timeout for -# challenges) to <n> seconds (default 3). -#chap-restart <n> - -# Set the maximum number of CHAP challenge transmissions to <n> -# (default 10). -#chap-max-challenge - -# If this option is given, pppd will rechallenge the peer every <n> -# seconds. -#chap-interval <n> - -# With this option, pppd will accept the peer's idea of our local IP -# address, even if the local IP address was specified in an option. -#ipcp-accept-local - -# With this option, pppd will accept the peer's idea of its (remote) IP -# address, even if the remote IP address was specified in an option. -#ipcp-accept-remote - -# Disable the IPXCP and IPX protocols. -# To let pppd pass IPX packets comment this out --- you'll probably also -# want to install ipxripd, and have the Internal IPX Network option enabled -# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info. -noipx - -# Exit once a connection has been made and terminated. This is the default, -# unless the `persist' or `demand' option has been specified. -#nopersist - -# Do not exit after a connection is terminated; instead try to reopen -# the connection. -#persist - -# Terminate after n consecutive failed connection attempts. -# A value of 0 means no limit. The default value is 10. -#maxfail <n> - -# Initiate the link only on demand, i.e. when data traffic is present. -# With this option, the remote IP address must be specified by the user on -# the command line or in an options file. Pppd will initially configure -# the interface and enable it for IP traffic without connecting to the peer. -# When traffic is available, pppd will connect to the peer and perform -# negotiation, authentication, etc. When this is completed, pppd will -# commence passing data packets (i.e., IP packets) across the link. -#demand - -# Specifies that pppd should disconnect if the link is idle for <n> seconds. -# The link is idle when no data packets (i.e. IP packets) are being sent or -# received. Note: it is not advisable to use this option with the persist -# option without the demand option. If the active-filter option is given, -# data packets which are rejected by the specified activity filter also -# count as the link being idle. -#idle <n> - -# Specifies how many seconds to wait before re-initiating the link after -# it terminates. This option only has any effect if the persist or demand -# option is used. The holdoff period is not applied if the link was -# terminated because it was idle. -#holdoff <n> - -# Wait for up n milliseconds after the connect script finishes for a valid -# PPP packet from the peer. At the end of this time, or when a valid PPP -# packet is received from the peer, pppd will commence negotiation by -# sending its first LCP packet. The default value is 1000 (1 second). -# This wait period only applies if the connect or pty option is used. -#connect-delay <n> - -# Packet filtering: for more information, see pppd(8) -# Any packets matching the filter expression will be interpreted as link -# activity, and will cause a "demand" connection to be activated, and reset -# the idle connection timer. (idle option) -# The filter expression is akin to that of tcpdump(1) -#active-filter <filter-expression> - -# uncomment the line below this if you use PPPoE -#plugin /usr/lib/pppd/plugins/pppoe.so - -# ---<End of File>--- diff --git a/core/ppp/plog b/core/ppp/plog deleted file mode 100644 index 84d2c7340c..0000000000 --- a/core/ppp/plog +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/sh - -if [ -s /var/log/ppp.log ]; then - exec tail "$@" /var/log/ppp.log -else - exec tail "$@" /var/log/syslog | grep ' \(pppd\|chat\)\[' -fi diff --git a/core/ppp/poff b/core/ppp/poff deleted file mode 100644 index 8b4dffc59e..0000000000 --- a/core/ppp/poff +++ /dev/null @@ -1,103 +0,0 @@ -#!/bin/sh - -# Written by John Hasler <john@dhh.gt.org> and based on work -# by Phil Hands <phil@hands.com>. Distributed under the GNU GPL - -if [ -x /usr/bin/kill ]; then - KILL="/usr/bin/kill" -else - KILL="/bin/kill" -fi -SIG=TERM -DONE="stopped" -MODE="" - -usage () -{ - cat <<!EOF! -usage: $0 [option] [provider] -options: - -r Cause pppd to drop the line and redial. - -d Toggle the state of pppd's debug option. - -c Cause pppd to renegotiate compression. - -a Stop all pppd's. 'provider' will be ignored. - -h Print this help summary and exit. - -v Print version and exit. - none Stop pppd. - -Options may not be combined. - -If 'provider' is omitted pppd will be stopped or signalled if and only if -there is exactly one running unless the '-a' option was given. If -'provider' is supplied the pppd controlling the connection to that -provider will be stopped or signalled. -!EOF! -} - -# Get option. If there are none replace the "?" that getopts puts in -# FLAG on error with "null". -getopts rdcavh FLAG -if [ "$?" -ne 0 ]; then - FLAG="null" -fi - -# Check for additional options. Should be none. -getopts :rdcavh DUMMY -if [ "$?" -eq 0 ]; then - echo "$0: Illegal option -- ${OPTARG}." - exit 1 -fi - -case $FLAG in - "r") SIG=HUP; DONE=signalled; shift ;; - "d") SIG=USR1; DONE=signalled; shift ;; - "c") SIG=USR2; DONE=signalled; shift ;; - "a") MODE="all"; shift ;; - "v") echo "$0$Revision: 1.1 $_TrickToPrint_RCS_Revision"; exit 0 ;; - "h") usage; exit 0 ;; - "?") exit 1; -esac - -# Get the PIDs of all the pppds running. Could also get these from -# /var/run, but pppd doesn't create .pid files until ppp is up. -PIDS=`pidof pppd` - -# poff is pointless if pppd isn't running. -if test -z "$PIDS"; then - echo "$0: No pppd is running. None ${DONE}." - exit 1 -fi - -# Find out how many pppd's are running. -N=`echo "$PIDS" | wc -w` - -# If there are no arguments we can't do anything if there is more than one -# pppd running. -if test "$#" -eq 0 -a "$N" -gt 1 -a $FLAG != "a" ; then - echo "$0: More than one pppd running and no "-a" option and -no arguments supplied. Nothing ${DONE}." - exit 1 -fi - -# If either there are no arguments or '-a' was specified kill all the -# pppd's. -if test "$#" -eq 0 -o "$MODE" = "all" ; then - $KILL -$SIG $PIDS || { - echo "$0: $KILL failed. None ${DONE}." - exit 1 - } - exit 0 -fi - -# There is an argument, so kill the pppd started on that provider. -PID=`ps axw | grep "[ /]pppd call $1 *\$" | awk '{print $1}'` -if test -n "$PID" ; then - $KILL -$SIG $PID || { - echo "$0: $KILL failed. None ${DONE}." - exit 1 - } -else - echo "$0: I could not find a pppd process for provider '$1'. None ${DONE}." - exit 1 -fi -exit 0 diff --git a/core/ppp/pon b/core/ppp/pon deleted file mode 100644 index 36885050b5..0000000000 --- a/core/ppp/pon +++ /dev/null @@ -1,32 +0,0 @@ -#!/bin/sh - -case "$1" in - -*) echo " -Usage: pon [provider] [arguments] - -If you specify one argument, a PPP connection will be started using -settings from the appropriate file in the /etc/ppp/peers/ directory, and -any additional arguments supplied will be passed as extra arguments to -pppd. -" - exit 0 - ;; -esac - -if [ -z "$1" -a ! -f /etc/ppp/peers/provider ]; then - echo " -Please configure /etc/ppp/peers/provider or use a command line argument to -use another file in /etc/ppp/peers/ directory. -" - exit 1 -fi - -if [ "$1" -a ! -f "/etc/ppp/peers/$1" ]; then - echo " -The file /etc/ppp/peers/$1 does not exist. -" - exit 1 -fi - -exec /usr/sbin/pppd call ${@:-provider} - diff --git a/core/ppp/pon.1 b/core/ppp/pon.1 deleted file mode 100644 index bb3220564b..0000000000 --- a/core/ppp/pon.1 +++ /dev/null @@ -1,121 +0,0 @@ -.\" This manual is published under the GPL. -.\" All guidelines specified in the GPL apply here. -.\" To get an ascii file: -.\" groff -man -Tascii pon.1 > pon.txt -.\" -.TH PON 1 "July 2000" "Debian Project" "Debian PPPD" -.SH NAME -pon, poff, plog \- starts up, shuts down or lists the log of PPP connections -.SH SYNOPSIS -.B pon -[ isp-name [ options ] ] -.br -.B poff -[ -r ] [ -d ] [ -c ] [ -a ] [ -h ] [ isp-name ] -.br -.B plog -[ arguments ] -.SH DESCRIPTION -This manual page describes the \fBpon\fP, \fBplog\fP and \fBpoff\fP -scripts, which allow users to control PPP connections. -.. -.SS pon -\fBpon\fP, invoked without arguments, runs the \fI/etc/ppp/ppp_on_boot\fP -file, if it exists and is executable. Otherwise, a PPP connection will be -started using configuration from \fI/etc/ppp/peers/provider\fP. -This is the default behaviour unless an \fBisp-name\fP argument is given. -.PP -For instance, to use ISP configuration "myisp" run: -.IP -pon myisp -.PP -\fBpon\fP will then use the options file \fI/etc/ppp/peers/myisp\fP. -You can pass additional \fBoptions\fP after the ISP name, too. -\fBpon\fP can be used to run multiple, simultaneous PPP connections. -.. -.SS poff -\fBpoff\fP closes a PPP connection. If more than one PPP connection exists, -the one named in the argument to \fBpoff\fP will be killed, e.g. -.IP -poff myprovider2 -.PP -will terminate the connection to myprovider2, and leave the PPP connections -to e.g. "myprovider1" or "myprovider3" up and running. -.PP -\fBpoff\fP takes the following command line options: -.RS -.TP -.B "\-r" -causes the connection to be redialed after it is dropped. -.TP -.B "\-d" -toggles the state of pppd's debug option. -.TP -.B "\-c" -causes -.BR pppd (8) -to renegotiate compression. -.TP -.B "\-a" -stops all running ppp connections. If the argument \fBisp-name\fP -is given it will be ignored. -.TP -.B "\-h" -displays help information. -.TP -.B "\-v" -prints the version and exits. -.PP -If no argument is given, \fBpoff\fP will stop or signal pppd if and only -if there is exactly one running. If more than one connection is active, -it will exit with an error code of 1. -.. -.SS plog -\fBplog\fP shows you the last few lines of \fI/var/log/ppp.log\fP. If that -file doesn't exist, it shows you the last few lines of your -\fI/var/log/syslog\fP file, but excluding the lines not generated by pppd. -This script makes use of the -.BR tail (1) -command, so arguments that can be passed to -.BR tail (1) -can also be passed to \fBplog\fP. -.PP -Note: the \fBplog\fP script can only be used by root or another system -administrator in group "adm", due to security reasons. Also, to have all -pppd-generated information in one logfile, that plog can show, you need the -following line in your \fI/etc/syslog.conf\fP file: -.PP -local2.* -/var/log/ppp.log -.RE -.SH FILES -.TP -.I /etc/ppp/options -PPPd system options file. -.TP -.I /etc/ppp/pap-secrets -System PAP passwords file. -.TP -.I /etc/ppp/chap-secrets -System CHAP passwords file. -.TP -.I /etc/ppp/peers/ -Directory holding the peer options files. The default file is called -\fIprovider\fP. -.TP -.I /etc/chatscripts/provider -The chat script invoked from the default \fI/etc/ppp/peers/provider\fP. -.TP -.I /var/log/ppp.log -The default PPP log file. -.SH AUTHORS -The p-commands were written by Christoph Lameter <clameter@debian.org>. -Updated and revised by Philip Hands <phil@hands.com>. -.br -This manual was written by Othmar Pasteka <othmar@tron.at>. Modified -by Rob Levin <lilo@openprojects.net>, with some extensions taken from -the old p-commands manual written by John Hasler <jhasler@debian.org>. -.SH "SEE ALSO" -.BR pppd (8), -.BR chat (8), -.BR tail (1). - |