diff options
Diffstat (limited to 'extra/gdb/50_all_gdb-pie-2.patch')
-rw-r--r-- | extra/gdb/50_all_gdb-pie-2.patch | 2122 |
1 files changed, 0 insertions, 2122 deletions
diff --git a/extra/gdb/50_all_gdb-pie-2.patch b/extra/gdb/50_all_gdb-pie-2.patch deleted file mode 100644 index 946d055018..0000000000 --- a/extra/gdb/50_all_gdb-pie-2.patch +++ /dev/null @@ -1,2122 +0,0 @@ -Index: gdb-6.8/gdb/testsuite/configure -=================================================================== ---- gdb-6.8.orig/gdb/testsuite/configure 2007-12-29 06:01:30.000000000 -0800 -+++ gdb-6.8/gdb/testsuite/configure 2008-03-30 09:00:52.000000000 -0700 -@@ -3104,7 +3104,7 @@ - - - -- ac_config_files="$ac_config_files Makefile gdb.ada/Makefile gdb.arch/Makefile gdb.asm/Makefile gdb.base/Makefile gdb.cp/Makefile gdb.disasm/Makefile gdb.dwarf2/Makefile gdb.fortran/Makefile gdb.server/Makefile gdb.java/Makefile gdb.mi/Makefile gdb.modula2/Makefile gdb.objc/Makefile gdb.opt/Makefile gdb.pascal/Makefile gdb.threads/Makefile gdb.trace/Makefile gdb.xml/Makefile" -+ ac_config_files="$ac_config_files Makefile gdb.ada/Makefile gdb.arch/Makefile gdb.asm/Makefile gdb.base/Makefile gdb.cp/Makefile gdb.disasm/Makefile gdb.dwarf2/Makefile gdb.fortran/Makefile gdb.server/Makefile gdb.pie/Makefile gdb.java/Makefile gdb.mi/Makefile gdb.modula2/Makefile gdb.objc/Makefile gdb.opt/Makefile gdb.pascal/Makefile gdb.threads/Makefile gdb.trace/Makefile gdb.xml/Makefile" - cat >confcache <<\_ACEOF - # This file is a shell script that caches the results of configure - # tests run on this system so they can be shared between configure -@@ -3665,6 +3665,7 @@ - "gdb.dwarf2/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.dwarf2/Makefile" ;; - "gdb.fortran/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.fortran/Makefile" ;; - "gdb.server/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.server/Makefile" ;; -+ "gdb.pie/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.pie/Makefile" ;; - "gdb.java/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.java/Makefile" ;; - "gdb.mi/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.mi/Makefile" ;; - "gdb.modula2/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.modula2/Makefile" ;; -Index: gdb-6.8/gdb/testsuite/configure.ac -=================================================================== ---- gdb-6.8.orig/gdb/testsuite/configure.ac 2007-10-25 13:30:26.000000000 -0700 -+++ gdb-6.8/gdb/testsuite/configure.ac 2008-03-30 09:00:22.000000000 -0700 -@@ -114,7 +114,7 @@ - gdb.ada/Makefile \ - gdb.arch/Makefile gdb.asm/Makefile gdb.base/Makefile \ - gdb.cp/Makefile gdb.disasm/Makefile gdb.dwarf2/Makefile \ -- gdb.fortran/Makefile gdb.server/Makefile \ -+ gdb.fortran/Makefile gdb.server/Makefile gdb.pie/Makefile \ - gdb.java/Makefile gdb.mi/Makefile gdb.modula2/Makefile \ - gdb.objc/Makefile gdb.opt/Makefile gdb.pascal/Makefile \ - gdb.threads/Makefile gdb.trace/Makefile gdb.xml/Makefile]) -Index: gdb-6.8/gdb/testsuite/gdb.pie/Makefile.in -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ gdb-6.8/gdb/testsuite/gdb.pie/Makefile.in 2008-03-30 08:59:12.000000000 -0700 -@@ -0,0 +1,19 @@ -+VPATH = @srcdir@ -+srcdir = @srcdir@ -+ -+EXECUTABLES = -+MISCELLANEOUS = arch.inc -+ -+all info install-info dvi install uninstall installcheck check: -+ @echo "Nothing to be done for $@..." -+ -+clean mostlyclean: -+ -rm -f *~ *.o a.out *.x *.ci *.tmp -+ -rm -f core core.coremaker coremaker.core corefile $(EXECUTABLES) -+ -rm -f $(MISCELLANEOUS) -+ -+distclean maintainer-clean realclean: clean -+ -rm -f *~ core -+ -rm -f Makefile config.status config.log -+ -rm -f *-init.exp -+ -rm -fr *.log summary detail *.plog *.sum *.psum site.* -Index: gdb-6.8/gdb/testsuite/gdb.pie/attach.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ gdb-6.8/gdb/testsuite/gdb.pie/attach.c 2008-03-30 08:59:12.000000000 -0700 -@@ -0,0 +1,20 @@ -+/* This program is intended to be started outside of gdb, and then -+ attached to by gdb. Thus, it simply spins in a loop. The loop -+ is exited when & if the variable 'should_exit' is non-zero. (It -+ is initialized to zero in this program, so the loop will never -+ exit unless/until gdb sets the variable to non-zero.) -+ */ -+#include <stdio.h> -+ -+int should_exit = 0; -+ -+int main () -+{ -+ int local_i = 0; -+ -+ while (! should_exit) -+ { -+ local_i++; -+ } -+ return 0; -+} -Index: gdb-6.8/gdb/testsuite/gdb.pie/attach.exp -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ gdb-6.8/gdb/testsuite/gdb.pie/attach.exp 2008-03-30 08:59:12.000000000 -0700 -@@ -0,0 +1,432 @@ -+# Copyright 1997, 1999, 2002 Free Software Foundation, Inc. -+ -+# This program is free software; you can redistribute it and/or modify -+# it under the terms of the GNU General Public License as published by -+# the Free Software Foundation; either version 2 of the License, or -+# (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -+ -+# Please email any bugs, comments, and/or additions to this file to: -+# bug-gdb@prep.ai.mit.edu -+ -+if $tracelevel then { -+ strace $tracelevel -+ } -+ -+set prms_id 0 -+set bug_id 0 -+ -+# On HP-UX 11.0, this test is causing a process running the program -+# "attach" to be left around spinning. Until we figure out why, I am -+# commenting out the test to avoid polluting tiamat (our 11.0 nightly -+# test machine) with these processes. RT -+# -+# Setting the magic bit in the target app should work. I added a -+# "kill", and also a test for the R3 register warning. JB -+if { [istarget "hppa*-*-hpux*"] } { -+ return 0 -+} -+ -+# are we on a target board -+if [is_remote target] then { -+ return 0 -+} -+ -+set testfile "attach" -+set srcfile ${testfile}.c -+set srcfile2 ${testfile}2.c -+set binfile ${objdir}/${subdir}/${testfile} -+set binfile2 ${objdir}/${subdir}/${testfile}2 -+set escapedbinfile [string_to_regexp ${objdir}/${subdir}/${testfile}] -+set cleanupfile ${objdir}/${subdir}/${testfile}.awk -+ -+#execute_anywhere "rm -f ${binfile} ${binfile2}" -+remote_exec build "rm -f ${binfile} ${binfile2}" -+# For debugging this test -+# -+#log_user 1 -+ -+# Clean out any old files from past runs. -+# -+remote_exec build "${cleanupfile}" -+ -+# build the first test case -+# -+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug "additional_flags= -fpie -pie"}] != "" } { -+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -+} -+ -+# Build the in-system-call test -+ -+if { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug "additional_flags= -fpie -pie"}] != "" } { -+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -+} -+ -+if [get_compiler_info ${binfile}] { -+ return -1 -+} -+ -+proc do_attach_tests {} { -+ global gdb_prompt -+ global binfile -+ global escapedbinfile -+ global srcfile -+ global testfile -+ global objdir -+ global subdir -+ global timeout -+ -+ # Start the program running and then wait for a bit, to be sure -+ # that it can be attached to. -+ # -+ set testpid [eval exec $binfile &] -+ exec sleep 2 -+ -+ # Verify that we cannot attach to nonsense. -+ # -+ send_gdb "attach abc\n" -+ gdb_expect { -+ -re ".*Illegal process-id: abc.*$gdb_prompt $"\ -+ {pass "attach to nonsense is prohibited"} -+ -re "Attaching to.*, process .*couldn't open /proc file.*$gdb_prompt $"\ -+ { -+ # Response expected from /proc-based systems. -+ pass "attach to nonsense is prohibited" -+ } -+ -re "Attaching to.*$gdb_prompt $"\ -+ {fail "attach to nonsense is prohibited (bogus pid allowed)"} -+ -re "$gdb_prompt $" {fail "attach to nonsense is prohibited"} -+ timeout {fail "(timeout) attach to nonsense is prohibited"} -+ } -+ -+ # Verify that we cannot attach to what appears to be a valid -+ # process ID, but is a process that doesn't exist. Traditionally, -+ # most systems didn't have a process with ID 0, so we take that as -+ # the default. However, there are a few exceptions. -+ # -+ set boguspid 0 -+ if { [istarget "*-*-*bsd*"] } { -+ # In FreeBSD 5.0, PID 0 is used for "swapper". Use -1 instead -+ # (which should have the desired effect on any version of -+ # FreeBSD, and probably other *BSD's too). -+ set boguspid -1 -+ } -+ send_gdb "attach $boguspid\n" -+ gdb_expect { -+ -re "Attaching to.*, process $boguspid.*No such process.*$gdb_prompt $"\ -+ { -+ # Response expected on ptrace-based systems (i.e. HP-UX 10.20). -+ pass "attach to nonexistent process is prohibited" -+ } -+ -re "Attaching to.*, process $boguspid failed.*Hint.*$gdb_prompt $"\ -+ { -+ # Response expected on ttrace-based systems (i.e. HP-UX 11.0). -+ pass "attach to nonexistent process is prohibited" -+ } -+ -re "Attaching to.*, process $boguspid.*denied.*$gdb_prompt $"\ -+ {pass "attach to nonexistent process is prohibited"} -+ -re "Attaching to.*, process $boguspid.*not permitted.*$gdb_prompt $"\ -+ {pass "attach to nonexistent process is prohibited"} -+ -re "Attaching to.*, process .*couldn't open /proc file.*$gdb_prompt $"\ -+ { -+ # Response expected from /proc-based systems. -+ pass "attach to nonexistent process is prohibited" -+ } -+ -re "$gdb_prompt $" {fail "attach to nonexistent process is prohibited"} -+ timeout { -+ fail "(timeout) attach to nonexistent process is prohibited" -+ } -+ } -+ -+ # Verify that we can attach to the process by first giving its -+ # executable name via the file command, and using attach with -+ # the process ID. -+ # -+ # (Actually, the test system appears to do this automatically -+ # for us. So, we must also be prepared to be asked if we want -+ # to discard an existing set of symbols.) -+ # -+ send_gdb "file $binfile\n" -+ gdb_expect { -+ -re "Load new symbol table from.*y or n.*$" { -+ send_gdb "y\n" -+ gdb_expect { -+ -re "Reading symbols from $escapedbinfile\.\.\.*done.*$gdb_prompt $"\ -+ {pass "(re)set file, before attach1"} -+ -re "$gdb_prompt $" {fail "(re)set file, before attach1"} -+ timeout {fail "(timeout) (re)set file, before attach1"} -+ } -+ } -+ -re "Reading symbols from $escapedbinfile\.\.\.*done.*$gdb_prompt $"\ -+ {pass "set file, before attach1"} -+ -re "$gdb_prompt $" {fail "set file, before attach1"} -+ timeout {fail "(timeout) set file, before attach1"} -+ } -+ -+ send_gdb "attach $testpid\n" -+ gdb_expect { -+ -re "Attaching to program.*`?$escapedbinfile'?, process $testpid.*main.*at .*$srcfile:.*$gdb_prompt $"\ -+ {pass "attach1, after setting file"} -+ -re "$gdb_prompt $" {fail "attach1, after setting file"} -+ timeout {fail "(timeout) attach1, after setting file"} -+ } -+ -+ # Verify that we can "see" the variable "should_exit" in the -+ # program, and that it is zero. -+ # -+ send_gdb "print should_exit\n" -+ gdb_expect { -+ -re ".* = 0.*$gdb_prompt $"\ -+ {pass "after attach1, print should_exit"} -+ -re "$gdb_prompt $" {fail "after attach1, print should_exit"} -+ timeout {fail "(timeout) after attach1, print should_exit"} -+ } -+ -+ # Detach the process. -+ # -+ send_gdb "detach\n" -+ gdb_expect { -+ -re "Detaching from program: .*$escapedbinfile.*$gdb_prompt $"\ -+ {pass "attach1 detach"} -+ -re "$gdb_prompt $" {fail "attach1 detach"} -+ timeout {fail "(timeout) attach1 detach"} -+ } -+ -+ # Wait a bit for gdb to finish detaching -+ # -+ exec sleep 5 -+ -+ # Purge the symbols from gdb's brain. (We want to be certain -+ # the next attach, which won't be preceded by a "file" command, -+ # is really getting the executable file without our help.) -+ # -+ set old_timeout $timeout -+ set timeout 15 -+ send_gdb "file\n" -+ gdb_expect { -+ -re ".*gdb internal error.*$" { -+ fail "Internal error, prob. Memory corruption" -+ } -+ -re "No executable file now.*Discard symbol table.*y or n.*$" { -+ send_gdb "y\n" -+ gdb_expect { -+ -re "No symbol file now.*$gdb_prompt $"\ -+ {pass "attach1, purging symbols after detach"} -+ -re "$gdb_prompt $" {fail "attach1, purging symbols after detach"} -+ timeout {fail "(timeout) attach1, purging symbols after detach"} -+ } -+ } -+ -re "$gdb_prompt $" {fail "attach1, purging file after detach"} -+ timeout { -+ fail "(timeout) attach1, purging file after detach" -+ } -+ } -+ set timeout $old_timeout -+ -+ # Verify that we can attach to the process just by giving the -+ # process ID. -+ # -+ send_gdb "attach $testpid\n" -+ gdb_expect { -+ -re "Attaching to process $testpid.*Reading symbols from $escapedbinfile.*main.*at .*$gdb_prompt $"\ -+ {pass "attach2"} -+ -re "$gdb_prompt $" {fail "attach2"} -+ timeout {fail "(timeout) attach2"} -+ } -+ -+ # Verify that we can modify the variable "should_exit" in the -+ # program. -+ # -+ send_gdb "set should_exit=1\n" -+ gdb_expect { -+ -re "$gdb_prompt $" {pass "after attach2, set should_exit"} -+ timeout {fail "(timeout) after attach2, set should_exit"} -+ } -+ -+ # Verify that the modification really happened. -+ # -+ send_gdb "tbreak 19\n" -+ gdb_expect { -+ -re "Breakpoint .*at.*$srcfile, line 19.*$gdb_prompt $"\ -+ {pass "after attach2, set tbreak postloop"} -+ -re "$gdb_prompt $" {fail "after attach2, set tbreak postloop"} -+ timeout {fail "(timeout) after attach2, set tbreak postloop"} -+ } -+ send_gdb "continue\n" -+ gdb_expect { -+ -re "main.*at.*$srcfile:19.*$gdb_prompt $"\ -+ {pass "after attach2, reach tbreak postloop"} -+ -re "$gdb_prompt $" {fail "after attach2, reach tbreak postloop"} -+ timeout {fail "(timeout) after attach2, reach tbreak postloop"} -+ } -+ -+ # Allow the test process to exit, to cleanup after ourselves. -+ # -+ send_gdb "continue\n" -+ gdb_expect { -+ -re "Program exited normally.*$gdb_prompt $"\ -+ {pass "after attach2, exit"} -+ -re "$gdb_prompt $" {fail "after attach2, exit"} -+ timeout {fail "(timeout) after attach2, exit"} -+ } -+ -+ # Make sure we don't leave a process around to confuse -+ # the next test run (and prevent the compile by keeping -+ # the text file busy), in case the "set should_exit" didn't -+ # work. -+ # -+ remote_exec build "kill -9 ${testpid}" -+ # Start the program running and then wait for a bit, to be sure -+ # that it can be attached to. -+ # -+ set testpid [eval exec $binfile &] -+ exec sleep 2 -+ -+ # Verify that we can attach to the process, and find its a.out -+ # when we're cd'd to some directory that doesn't contain the -+ # a.out. (We use the source path set by the "dir" command.) -+ # -+ send_gdb "dir ${objdir}/${subdir}\n" -+ gdb_expect { -+ -re ".*Source directories searched: .*$gdb_prompt $"\ -+ {pass "set source path"} -+ -re "$gdb_prompt $" {fail "set source path"} -+ timeout {fail "(timeout) set source path"} -+ } -+ -+ send_gdb "cd /tmp\n" -+ gdb_expect { -+ -re ".*Working directory /tmp.*$gdb_prompt $"\ -+ {pass "cd away from process' a.out"} -+ -re "$gdb_prompt $" {fail "cd away from process' a.out"} -+ timeout {fail "(timeout) cd away from process' a.out"} -+ } -+ -+ # Explicitly flush out any knowledge of the previous attachment. -+ send_gdb "symbol\n" -+ gdb_expect { -+ -re ".*Discard symbol table from.*y or n. $"\ -+ {send_gdb "y\n" -+ gdb_expect { -+ -re ".*No symbol file now.*$gdb_prompt $"\ -+ {pass "before attach3, flush symbols"} -+ -re "$gdb_prompt $" {fail "before attach3, flush symbols"} -+ timeout {fail "(timeout) before attach3, flush symbols"} -+ } -+ } -+ -re ".*No symbol file now.*$gdb_prompt $"\ -+ {pass "before attach3, flush symbols"} -+ -re "$gdb_prompt $" {fail "before attach3, flush symbols"} -+ timeout {fail "(timeout) before attach3, flush symbols"} -+ } -+ send_gdb "exec\n" -+ gdb_expect { -+ -re ".*No executable file now.*$gdb_prompt $"\ -+ {pass "before attach3, flush exec"} -+ -re "$gdb_prompt $" {fail "before attach3, flush exec"} -+ timeout {fail "(timeout) before attach3, flush exec"} -+ } -+ -+ send_gdb "attach $testpid\n" -+ gdb_expect { -+ -re "Attaching to process $testpid.*Reading symbols from $escapedbinfile.*main.*at .*$gdb_prompt $"\ -+ {pass "attach when process' a.out not in cwd"} -+ -re "$gdb_prompt $" {fail "attach when process' a.out not in cwd"} -+ timeout {fail "(timeout) attach when process' a.out not in cwd"} -+ } -+ -+ send_gdb "kill\n" -+ gdb_expect { -+ -re ".*Kill the program being debugged.*y or n. $"\ -+ {send_gdb "y\n" -+ gdb_expect { -+ -re "$gdb_prompt $" {pass "after attach3, exit"} -+ timeout {fail "(timeout) after attach3, exit"} -+ } -+ } -+ -re "$gdb_prompt $" {fail "after attach3, exit"} -+ timeout {fail "(timeout) after attach3, exit"} -+ } -+ -+ # Another "don't leave a process around" -+ remote_exec build "kill -9 ${testpid}" -+} -+ -+proc do_call_attach_tests {} { -+ global gdb_prompt -+ global binfile2 -+ -+ # Start the program running and then wait for a bit, to be sure -+ # that it can be attached to. -+ # -+ set testpid [eval exec $binfile2 &] -+ exec sleep 2 -+ -+ # Attach -+ # -+ gdb_test "file $binfile2" ".*" "force switch to gdb64, if necessary" -+ send_gdb "attach $testpid\n" -+ gdb_expect { -+ -re ".*warning: reading register.*I.*O error.*$gdb_prompt $" { -+ fail "attach call, read register 3 error" -+ } -+ -re "Attaching to.*process $testpid.*libc.*$gdb_prompt $" { -+ pass "attach call" -+ } -+ -re "$gdb_prompt $" {fail "attach call"} -+ timeout {fail "(timeout) attach call"} -+ } -+ -+ # See if other registers are problems -+ # -+ send_gdb "i r r3\n" -+ gdb_expect { -+ -re ".*warning: reading register.*$gdb_prompt $" { -+ pass "CHFts23490: known bug" -+ } -+ -re ".*r3.*$gdb_prompt $" { -+ pass "Bug fixed, Yayyy!" -+ } -+ timeout { fail "timeout on info reg" } -+ } -+ -+ # Get rid of the process -+ # -+ gdb_test "p should_exit = 1" ".*" -+ gdb_test "c" ".*Program exited normally.*" -+ -+ # Be paranoid -+ # -+ remote_exec build "kill -9 ${testpid}" -+ -+} -+ -+ -+# Start with a fresh gdb -+# -+gdb_exit -+gdb_start -+gdb_reinitialize_dir $srcdir/$subdir -+gdb_load ${binfile} -+ -+# This is a test of gdb's ability to attach to a running process. -+# -+do_attach_tests -+ -+# Test attaching when the target is inside a system call -+# -+gdb_exit -+gdb_start -+ -+gdb_reinitialize_dir $srcdir/$subdir -+do_call_attach_tests -+ -+return 0 -Index: gdb-6.8/gdb/testsuite/gdb.pie/attach2.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ gdb-6.8/gdb/testsuite/gdb.pie/attach2.c 2008-03-30 08:59:12.000000000 -0700 -@@ -0,0 +1,24 @@ -+/* This program is intended to be started outside of gdb, and then -+ attached to by gdb. Thus, it simply spins in a loop. The loop -+ is exited when & if the variable 'should_exit' is non-zero. (It -+ is initialized to zero in this program, so the loop will never -+ exit unless/until gdb sets the variable to non-zero.) -+ */ -+#include <stdio.h> -+#include <stdlib.h> -+#include <unistd.h> -+ -+int should_exit = 0; -+ -+int main () -+{ -+ int local_i = 0; -+ -+ sleep( 10 ); /* System call causes register fetch to fail */ -+ /* This is a known HPUX "feature" */ -+ while (! should_exit) -+ { -+ local_i++; -+ } -+ return (0); -+} -Index: gdb-6.8/gdb/testsuite/gdb.pie/break.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ gdb-6.8/gdb/testsuite/gdb.pie/break.c 2008-03-30 08:59:12.000000000 -0700 -@@ -0,0 +1,146 @@ -+/* This testcase is part of GDB, the GNU debugger. -+ -+ Copyright 1992, 1993, 1994, 1995, 1999, 2002, 2003 Free Software -+ Foundation, Inc. -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the Free Software -+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ -+ Please email any bugs, comments, and/or additions to this file to: -+ bug-gdb@prep.ai.mit.edu */ -+ -+#ifdef vxworks -+ -+# include <stdio.h> -+ -+/* VxWorks does not supply atoi. */ -+static int -+atoi (z) -+ char *z; -+{ -+ int i = 0; -+ -+ while (*z >= '0' && *z <= '9') -+ i = i * 10 + (*z++ - '0'); -+ return i; -+} -+ -+/* I don't know of any way to pass an array to VxWorks. This function -+ can be called directly from gdb. */ -+ -+vxmain (arg) -+char *arg; -+{ -+ char *argv[2]; -+ -+ argv[0] = ""; -+ argv[1] = arg; -+ main (2, argv, (char **) 0); -+} -+ -+#else /* ! vxworks */ -+# include <stdio.h> -+# include <stdlib.h> -+#endif /* ! vxworks */ -+ -+#ifdef PROTOTYPES -+extern int marker1 (void); -+extern int marker2 (int a); -+extern void marker3 (char *a, char *b); -+extern void marker4 (long d); -+#else -+extern int marker1 (); -+extern int marker2 (); -+extern void marker3 (); -+extern void marker4 (); -+#endif -+ -+/* -+ * This simple classical example of recursion is useful for -+ * testing stack backtraces and such. -+ */ -+ -+#ifdef PROTOTYPES -+int factorial(int); -+ -+int -+main (int argc, char **argv, char **envp) -+#else -+int -+main (argc, argv, envp) -+int argc; -+char *argv[], **envp; -+#endif -+{ -+#ifdef usestubs -+ set_debug_traps(); /* set breakpoint 5 here */ -+ breakpoint(); -+#endif -+ if (argc == 12345) { /* an unlikely value < 2^16, in case uninited */ /* set breakpoint 6 here */ -+ fprintf (stderr, "usage: factorial <number>\n"); -+ return 1; -+ } -+ printf ("%d\n", factorial (atoi ("6"))); /* set breakpoint 1 here */ -+ /* set breakpoint 12 here */ -+ marker1 (); /* set breakpoint 11 here */ -+ marker2 (43); /* set breakpoint 20 here */ -+ marker3 ("stack", "trace"); /* set breakpoint 21 here */ -+ marker4 (177601976L); -+ argc = (argc == 12345); /* This is silly, but we can step off of it */ /* set breakpoint 2 here */ -+ return argc; /* set breakpoint 10 here */ -+} -+ -+#ifdef PROTOTYPES -+int factorial (int value) -+#else -+int factorial (value) -+int value; -+#endif -+{ -+ if (value > 1) { /* set breakpoint 7 here */ -+ value *= factorial (value - 1); -+ } -+ return (value); /* set breakpoint 19 here */ -+} -+ -+#ifdef PROTOTYPES -+int multi_line_if_conditional (int a, int b, int c) -+#else -+int multi_line_if_conditional (a, b, c) -+ int a, b, c; -+#endif -+{ -+ if (a /* set breakpoint 3 here */ -+ && b -+ && c) -+ return 0; -+ else -+ return 1; -+} -+ -+#ifdef PROTOTYPES -+int multi_line_while_conditional (int a, int b, int c) -+#else -+int multi_line_while_conditional (a, b, c) -+ int a, b, c; -+#endif -+{ -+ while (a /* set breakpoint 4 here */ -+ && b -+ && c) -+ { -+ a--, b--, c--; -+ } -+ return 0; -+} -Index: gdb-6.8/gdb/testsuite/gdb.pie/break.exp -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ gdb-6.8/gdb/testsuite/gdb.pie/break.exp 2008-03-30 08:59:12.000000000 -0700 -@@ -0,0 +1,973 @@ -+# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, -+# 2000, 2002, 2003, 2004 -+# Free Software Foundation, Inc. -+ -+# This program is free software; you can redistribute it and/or modify -+# it under the terms of the GNU General Public License as published by -+# the Free Software Foundation; either version 2 of the License, or -+# (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ -+# Please email any bugs, comments, and/or additions to this file to: -+# bug-gdb@prep.ai.mit.edu -+ -+# This file was written by Rob Savoye. (rob@cygnus.com) -+ -+# Test the same stuff but with PIE executables -+ -+if $tracelevel then { -+ strace $tracelevel -+} -+ -+ -+# -+# test running programs -+# -+set prms_id 0 -+set bug_id 0 -+ -+set testfile "break" -+set srcfile ${testfile}.c -+set srcfile1 ${testfile}1.c -+set binfile ${objdir}/${subdir}/${testfile} -+ -+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}0.o" object {debug "additional_flags=-w -fpie -pie"}] != "" } { -+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -+} -+ -+if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile}1.o" object {debug "additional_flags=-w -fpie -pie"}] != "" } { -+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -+} -+ -+if { [gdb_compile "${binfile}0.o ${binfile}1.o" "${binfile}" executable {debug "additional_flags=-w -fpie -pie"}] != "" } { -+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -+} -+ -+if [get_compiler_info ${binfile}] { -+ return -1 -+} -+ -+gdb_exit -+gdb_start -+gdb_reinitialize_dir $srcdir/$subdir -+gdb_load ${binfile} -+ -+if [target_info exists gdb_stub] { -+ gdb_step_for_stub; -+} -+# -+# test simple breakpoint setting commands -+# -+ -+# Test deleting all breakpoints when there are none installed, -+# GDB should not prompt for confirmation. -+# Note that gdb-init.exp provides a "delete_breakpoints" proc -+# for general use elsewhere. -+ -+send_gdb "delete breakpoints\n" -+gdb_expect { -+ -re "Delete all breakpoints.*$" { -+ send_gdb "y\n" -+ gdb_expect { -+ -re "$gdb_prompt $" { -+ fail "Delete all breakpoints when none (unexpected prompt)" -+ } -+ timeout { fail "Delete all breakpoints when none (timeout after unexpected prompt)" } -+ } -+ } -+ -re ".*$gdb_prompt $" { pass "Delete all breakpoints when none" } -+ timeout { fail "Delete all breakpoints when none (timeout)" } -+} -+ -+# -+# test break at function -+# -+gdb_test "break main" \ -+ "Breakpoint.*at.* file .*$srcfile, line.*" \ -+ "breakpoint function" -+ -+# -+# test break at quoted function -+# -+gdb_test "break \"marker2\"" \ -+ "Breakpoint.*at.* file .*$srcfile1, line.*" \ -+ "breakpoint quoted function" -+ -+# -+# test break at function in file -+# -+gdb_test "break $srcfile:factorial" \ -+ "Breakpoint.*at.* file .*$srcfile, line.*" \ -+ "breakpoint function in file" -+ -+set bp_location1 [gdb_get_line_number "set breakpoint 1 here"] -+ -+# -+# test break at line number -+# -+# Note that the default source file is the last one whose source text -+# was printed. For native debugging, before we've executed the -+# program, this is the file containing main, but for remote debugging, -+# it's wherever the processor was stopped when we connected to the -+# board. So, to be sure, we do a list command. -+# -+gdb_test "list main" \ -+ ".*main \\(argc, argv, envp\\).*" \ -+ "use `list' to establish default source file" -+gdb_test "break $bp_location1" \ -+ "Breakpoint.*at.* file .*$srcfile, line $bp_location1\\." \ -+ "breakpoint line number" -+ -+# -+# test duplicate breakpoint -+# -+gdb_test "break $bp_location1" \ -+ "Note: breakpoint \[0-9\]+ also set at pc.*Breakpoint \[0-9\]+ at.* file .*$srcfile, line $bp_location1\\." \ -+ "breakpoint duplicate" -+ -+set bp_location2 [gdb_get_line_number "set breakpoint 2 here"] -+ -+# -+# test break at line number in file -+# -+gdb_test "break $srcfile:$bp_location2" \ -+ "Breakpoint.*at.* file .*$srcfile, line $bp_location2\\." \ -+ "breakpoint line number in file" -+ -+set bp_location3 [gdb_get_line_number "set breakpoint 3 here"] -+set bp_location4 [gdb_get_line_number "set breakpoint 4 here"] -+ -+# -+# Test putting a break at the start of a multi-line if conditional. -+# Verify the breakpoint was put at the start of the conditional. -+# -+gdb_test "break multi_line_if_conditional" \ -+ "Breakpoint.*at.* file .*$srcfile, line $bp_location3\\." \ -+ "breakpoint at start of multi line if conditional" -+ -+gdb_test "break multi_line_while_conditional" \ -+ "Breakpoint.*at.* file .*$srcfile, line $bp_location4\\." \ -+ "breakpoint at start of multi line while conditional" -+ -+set bp_location5 [gdb_get_line_number "set breakpoint 5 here"] -+set bp_location6 [gdb_get_line_number "set breakpoint 6 here"] -+ -+# -+# check to see what breakpoints are set -+# -+if [target_info exists gdb_stub] { -+ set main_line $bp_location5 -+} else { -+ set main_line $bp_location6 -+} -+ -+if {$hp_aCC_compiler} { -+ set proto "\\(int\\)" -+} else { -+ set proto "" -+} -+ -+set bp_location7 [gdb_get_line_number "set breakpoint 7 here"] -+set bp_location8 [gdb_get_line_number "set breakpoint 8 here" $srcfile1] -+set bp_location9 [gdb_get_line_number "set breakpoint 9 here" $srcfile1] -+ -+gdb_test "info break" \ -+ "Num Type\[ \]+Disp Enb Address\[ \]+What.* -+\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$main_line.* -+\[0-9\]+\[\t \]+breakpoint keep y.* in marker2 at .*$srcfile1:($bp_location8|$bp_location9).* -+\[0-9\]+\[\t \]+breakpoint keep y.* in factorial$proto at .*$srcfile:$bp_location7.* -+\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.* -+\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.* -+\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location2.* -+\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_if_conditional at .*$srcfile:$bp_location3.* -+\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_while_conditional at .*$srcfile:$bp_location4" \ -+ "breakpoint info" -+ -+# FIXME: The rest of this test doesn't work with anything that can't -+# handle arguments. -+# Huh? There doesn't *appear* to be anything that passes arguments -+# below. -+if [istarget "mips-idt-*"] then { -+ return -+} -+ -+# -+# run until the breakpoint at main is hit. For non-stubs-using targets. -+# -+if ![target_info exists use_gdb_stub] { -+ if [istarget "*-*-vxworks*"] then { -+ send_gdb "run vxmain \"2\"\n" -+ set timeout 120 -+ verbose "Timeout is now $timeout seconds" 2 -+ } else { -+ send_gdb "run\n" -+ } -+ gdb_expect { -+ -re "The program .* has been started already.*y or n. $" { -+ send_gdb "y\n" -+ exp_continue -+ } -+ -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $"\ -+ { pass "run until function breakpoint" } -+ -re ".*$gdb_prompt $" { fail "run until function breakpoint" } -+ timeout { fail "run until function breakpoint (timeout)" } -+ } -+} else { -+ if ![target_info exists gdb_stub] { -+ gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.*\{.*" "stub continue" -+ } -+} -+ -+# -+# run until the breakpoint at a line number -+# -+gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location1.*$bp_location1\[\t \]+printf.*factorial.*" \ -+ "run until breakpoint set at a line number" -+ -+# -+# Run until the breakpoint set in a function in a file -+# -+for {set i 6} {$i >= 1} {incr i -1} { -+ gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, factorial \\(value=$i\\) at .*$srcfile:$bp_location7.*$bp_location7\[\t \]+.*if .value > 1. \{.*" \ -+ "run until file:function($i) breakpoint" -+} -+ -+# -+# Run until the breakpoint set at a quoted function -+# -+gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile1:($bp_location8|$bp_location9).*" \ -+ "run until quoted breakpoint" -+# -+# run until the file:function breakpoint at a line number in a file -+# -+gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location2.*$bp_location2\[\t \]+argc = \\(argc == 12345\\);.*" \ -+ "run until file:linenum breakpoint" -+ -+# Test break at offset +1 -+set bp_location10 [gdb_get_line_number "set breakpoint 10 here"] -+ -+gdb_test "break +1" \ -+ "Breakpoint.*at.* file .*$srcfile, line $bp_location10\\." \ -+ "breakpoint offset +1" -+ -+# Check to see if breakpoint is hit when stepped onto -+ -+gdb_test "step" \ -+ ".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10.*$bp_location10\[\t \]+return argc;.*breakpoint 10 here.*" \ -+ "step onto breakpoint" -+ -+# -+# delete all breakpoints so we can start over, course this can be a test too -+# -+delete_breakpoints -+ -+# -+# test temporary breakpoint at function -+# -+ -+gdb_test "tbreak main" "Breakpoint.*at.* file .*$srcfile, line.*" "Temporary breakpoint function" -+ -+# -+# test break at function in file -+# -+ -+gdb_test "tbreak $srcfile:factorial" "Breakpoint.*at.* file .*$srcfile, line.*" \ -+ "Temporary breakpoint function in file" -+ -+# -+# test break at line number -+# -+send_gdb "tbreak $bp_location1\n" -+gdb_expect { -+ -re "Breakpoint.*at.* file .*$srcfile, line $bp_location1.*$gdb_prompt $" { pass "Temporary breakpoint line number #1" } -+ -re ".*$gdb_prompt $" { pass "Temporary breakpoint line number #1" } -+ timeout { fail "breakpoint line number #1 (timeout)" } -+} -+ -+gdb_test "tbreak $bp_location6" "Breakpoint.*at.* file .*$srcfile, line $bp_location6.*" "Temporary breakpoint line number #2" -+ -+# -+# test break at line number in file -+# -+send_gdb "tbreak $srcfile:$bp_location2\n" -+gdb_expect { -+ -re "Breakpoint.*at.* file .*$srcfile, line $bp_location2.*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" } -+ -re ".*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" } -+ timeout { fail "Temporary breakpoint line number in file #1 (timeout)" } -+} -+ -+set bp_location11 [gdb_get_line_number "set breakpoint 11 here"] -+gdb_test "tbreak $srcfile:$bp_location11" "Breakpoint.*at.* file .*$srcfile, line $bp_location11.*" "Temporary breakpoint line number in file #2" -+ -+# -+# check to see what breakpoints are set (temporary this time) -+# -+gdb_test "info break" "Num Type.*Disp Enb Address.*What.*\[\r\n\] -+\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$main_line.*\[\r\n\] -+\[0-9\]+\[\t \]+breakpoint del.*y.*in factorial$proto at .*$srcfile:$bp_location7.*\[\r\n\] -+\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location1.*\[\r\n\] -+\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location6.*\[\r\n\] -+\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location2.*\[\r\n\] -+\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location11.*" \ -+ "Temporary breakpoint info" -+ -+ -+#*********** -+ -+# Verify that catchpoints for fork, vfork and exec don't trigger -+# inappropriately. (There are no calls to those system functions -+# in this test program.) -+# -+if ![runto_main] then { fail "break tests suppressed" } -+ -+send_gdb "catch\n" -+gdb_expect { -+ -re "Catch requires an event name.*$gdb_prompt $"\ -+ {pass "catch requires an event name"} -+ -re "$gdb_prompt $"\ -+ {fail "catch requires an event name"} -+ timeout {fail "(timeout) catch requires an event name"} -+} -+ -+ -+set name "set catch fork, never expected to trigger" -+send_gdb "catch fork\n" -+gdb_expect { -+ -re "Catchpoint \[0-9\]* .fork..*$gdb_prompt $" -+ {pass $name} -+ -re "Catch of fork not yet implemented.*$gdb_prompt $" -+ {pass $name} -+ -re "$gdb_prompt $" -+ {fail $name} -+ timeout {fail "(timeout) $name"} -+} -+ -+ -+set name "set catch vfork, never expected to trigger" -+send_gdb "catch vfork\n" -+ -+# If we are on HP-UX 10.20, we expect an error message to be -+# printed if we type "catch vfork" at the gdb gdb_prompt. This is -+# because on HP-UX 10.20, we cannot catch vfork events. -+ -+if [istarget "hppa*-hp-hpux10.20"] then { -+ gdb_expect { -+ -re "Catch of vfork events not supported on HP-UX 10.20..*$gdb_prompt $" -+ {pass $name} -+ -re "$gdb_prompt $" -+ {fail $name} -+ timeout {fail "(timeout) $name"} -+ } -+} else { -+ gdb_expect { -+ -re "Catchpoint \[0-9\]* .vfork..*$gdb_prompt $" -+ {pass $name} -+ -re "Catch of vfork not yet implemented.*$gdb_prompt $" -+ {pass $name} -+ -re "$gdb_prompt $" -+ {fail $name} -+ timeout {fail "(timeout) $name"} -+ } -+} -+ -+set name "set catch exec, never expected to trigger" -+send_gdb "catch exec\n" -+gdb_expect { -+ -re "Catchpoint \[0-9\]* .exec..*$gdb_prompt $" -+ {pass $name} -+ -re "Catch of exec not yet implemented.*$gdb_prompt $" -+ {pass $name} -+ -re "$gdb_prompt $" {fail $name} -+ timeout {fail "(timeout) $name"} -+} -+ -+# Verify that GDB responds gracefully when asked to set a breakpoint -+# on a nonexistent source line. -+# -+send_gdb "break 999\n" -+gdb_expect { -+ -re "No line 999 in file .*$gdb_prompt $"\ -+ {pass "break on non-existent source line"} -+ -re "$gdb_prompt $"\ -+ {fail "break on non-existent source line"} -+ timeout {fail "(timeout) break on non-existent source line"} -+} -+ -+# Run to the desired default location. If not positioned here, the -+# tests below don't work. -+# -+gdb_test "until $bp_location1" "main .* at .*:$bp_location1.*" "until bp_location1" -+ -+ -+# Verify that GDB allows one to just say "break", which is treated -+# as the "default" breakpoint. Note that GDB gets cute when printing -+# the informational message about other breakpoints at the same -+# location. We'll hit that bird with this stone too. -+# -+send_gdb "break\n" -+gdb_expect { -+ -re "Breakpoint \[0-9\]*.*$gdb_prompt $"\ -+ {pass "break on default location, 1st time"} -+ -re "$gdb_prompt $"\ -+ {fail "break on default location, 1st time"} -+ timeout {fail "(timeout) break on default location, 1st time"} -+} -+ -+send_gdb "break\n" -+gdb_expect { -+ -re "Note: breakpoint \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\ -+ {pass "break on default location, 2nd time"} -+ -re "$gdb_prompt $"\ -+ {fail "break on default location, 2nd time"} -+ timeout {fail "(timeout) break on default location, 2nd time"} -+} -+ -+send_gdb "break\n" -+gdb_expect { -+ -re "Note: breakpoints \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\ -+ {pass "break on default location, 3rd time"} -+ -re "$gdb_prompt $"\ -+ {fail "break on default location, 3rd time"} -+ timeout {fail "(timeout) break on default location, 3rd time"} -+} -+ -+send_gdb "break\n" -+gdb_expect { -+ -re "Note: breakpoints \[0-9\]*, \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\ -+ {pass "break on default location, 4th time"} -+ -re "$gdb_prompt $"\ -+ {fail "break on default location, 4th time"} -+ timeout {fail "(timeout) break on default location, 4th time"} -+} -+ -+# Verify that a "silent" breakpoint can be set, and that GDB is indeed -+# "silent" about its triggering. -+# -+if ![runto_main] then { fail "break tests suppressed" } -+ -+send_gdb "break $bp_location1\n" -+gdb_expect { -+ -re "Breakpoint (\[0-9\]*) at .*, line $bp_location1.*$gdb_prompt $"\ -+ {pass "set to-be-silent break bp_location1"} -+ -re "$gdb_prompt $"\ -+ {fail "set to-be-silent break bp_location1"} -+ timeout {fail "(timeout) set to-be-silent break bp_location1"} -+} -+ -+send_gdb "commands $expect_out(1,string)\n" -+send_gdb "silent\n" -+send_gdb "end\n" -+gdb_expect { -+ -re ".*$gdb_prompt $"\ -+ {pass "set silent break bp_location1"} -+ timeout {fail "(timeout) set silent break bp_location1"} -+} -+ -+send_gdb "info break $expect_out(1,string)\n" -+gdb_expect { -+ -re "\[0-9\]*\[ \t\]*breakpoint.*:$bp_location1\r\n\[ \t\]*silent.*$gdb_prompt $"\ -+ {pass "info silent break bp_location1"} -+ -re "$gdb_prompt $"\ -+ {fail "info silent break bp_location1"} -+ timeout {fail "(timeout) info silent break bp_location1"} -+} -+send_gdb "continue\n" -+gdb_expect { -+ -re "Continuing.\r\n$gdb_prompt $"\ -+ {pass "hit silent break bp_location1"} -+ -re "$gdb_prompt $"\ -+ {fail "hit silent break bp_location1"} -+ timeout {fail "(timeout) hit silent break bp_location1"} -+} -+send_gdb "bt\n" -+gdb_expect { -+ -re "#0 main .* at .*:$bp_location1.*$gdb_prompt $"\ -+ {pass "stopped for silent break bp_location1"} -+ -re "$gdb_prompt $"\ -+ {fail "stopped for silent break bp_location1"} -+ timeout {fail "(timeout) stopped for silent break bp_location1"} -+} -+ -+# Verify that GDB can at least parse a breakpoint with the -+# "thread" keyword. (We won't attempt to test here that a -+# thread-specific breakpoint really triggers appropriately. -+# The gdb.threads subdirectory contains tests for that.) -+# -+set bp_location12 [gdb_get_line_number "set breakpoint 12 here"] -+send_gdb "break $bp_location12 thread 999\n" -+gdb_expect { -+ -re "Unknown thread 999.*$gdb_prompt $"\ -+ {pass "thread-specific breakpoint on non-existent thread disallowed"} -+ -re "$gdb_prompt $"\ -+ {fail "thread-specific breakpoint on non-existent thread disallowed"} -+ timeout {fail "(timeout) thread-specific breakpoint on non-existent thread disallowed"} -+} -+send_gdb "break $bp_location12 thread foo\n" -+gdb_expect { -+ -re "Junk after thread keyword..*$gdb_prompt $"\ -+ {pass "thread-specific breakpoint on bogus thread ID disallowed"} -+ -re "$gdb_prompt $"\ -+ {fail "thread-specific breakpoint on bogus thread ID disallowed"} -+ timeout {fail "(timeout) thread-specific breakpoint on bogus thread ID disallowed"} -+} -+ -+# Verify that GDB responds gracefully to a breakpoint command with -+# trailing garbage. -+# -+send_gdb "break $bp_location12 foo\n" -+gdb_expect { -+ -re "Junk at end of arguments..*$gdb_prompt $"\ -+ {pass "breakpoint with trailing garbage disallowed"} -+ -re "$gdb_prompt $"\ -+ {fail "breakpoint with trailing garbage disallowed"} -+ timeout {fail "(timeout) breakpoint with trailing garbage disallowed"} -+} -+ -+# Verify that GDB responds gracefully to a "clear" command that has -+# no matching breakpoint. (First, get us off the current source line, -+# which we know has a breakpoint.) -+# -+send_gdb "next\n" -+gdb_expect { -+ -re ".*$gdb_prompt $"\ -+ {pass "step over breakpoint"} -+ timeout {fail "(timeout) step over breakpoint"} -+} -+send_gdb "clear 81\n" -+gdb_expect { -+ -re "No breakpoint at 81..*$gdb_prompt $"\ -+ {pass "clear line has no breakpoint disallowed"} -+ -re "$gdb_prompt $"\ -+ {fail "clear line has no breakpoint disallowed"} -+ timeout {fail "(timeout) clear line has no breakpoint disallowed"} -+} -+send_gdb "clear\n" -+gdb_expect { -+ -re "No breakpoint at this line..*$gdb_prompt $"\ -+ {pass "clear current line has no breakpoint disallowed"} -+ -re "$gdb_prompt $"\ -+ {fail "clear current line has no breakpoint disallowed"} -+ timeout {fail "(timeout) clear current line has no breakpoint disallowed"} -+} -+ -+# Verify that we can set and clear multiple breakpoints. -+# -+# We don't test that it deletes the correct breakpoints. We do at -+# least test that it deletes more than one breakpoint. -+# -+gdb_test "break marker3" "Breakpoint.*at.*" "break marker3 #1" -+gdb_test "break marker3" "Breakpoint.*at.*" "break marker3 #2" -+gdb_test "clear marker3" {Deleted breakpoints [0-9]+ [0-9]+.*} -+ -+# Verify that a breakpoint can be set via a convenience variable. -+# -+send_gdb "set \$foo=$bp_location11\n" -+gdb_expect { -+ -re "$gdb_prompt $"\ -+ {pass "set convenience variable \$foo to bp_location11"} -+ timeout {fail "(timeout) set convenience variable \$foo to bp_location11"} -+} -+send_gdb "break \$foo\n" -+gdb_expect { -+ -re "Breakpoint (\[0-9\]*) at .*, line $bp_location11.*$gdb_prompt $"\ -+ {pass "set breakpoint via convenience variable"} -+ -re "$gdb_prompt $"\ -+ {fail "set breakpoint via convenience variable"} -+ timeout {fail "(timeout) set breakpoint via convenience variable"} -+} -+ -+# Verify that GDB responds gracefully to an attempt to set a -+# breakpoint via a convenience variable whose type is not integer. -+# -+send_gdb "set \$foo=81.5\n" -+gdb_expect { -+ -re "$gdb_prompt $"\ -+ {pass "set convenience variable \$foo to 81.5"} -+ timeout {fail "(timeout) set convenience variable \$foo to 81.5"} -+} -+send_gdb "break \$foo\n" -+gdb_expect { -+ -re "Convenience variables used in line specs must have integer values..*$gdb_prompt $"\ -+ {pass "set breakpoint via non-integer convenience variable disallowed"} -+ -re "$gdb_prompt $"\ -+ {fail "set breakpoint via non-integer convenience variable disallowed"} -+ timeout {fail "(timeout) set breakpoint via non-integer convenience variable disallowed"} -+} -+ -+# Verify that we can set and trigger a breakpoint in a user-called function. -+# -+send_gdb "break marker2\n" -+gdb_expect { -+ -re "Breakpoint (\[0-9\]*) at .*, line ($bp_location8|$bp_location9).*$gdb_prompt $"\ -+ {pass "set breakpoint on to-be-called function"} -+ -re "$gdb_prompt $"\ -+ {fail "set breakpoint on to-be-called function"} -+ timeout {fail "(timeout) set breakpoint on to-be-called function"} -+} -+send_gdb "print marker2(99)\n" -+gdb_expect { -+ -re "The program being debugged stopped while in a function called from GDB.\r\nWhen the function .marker2$proto. is done executing, GDB will silently\r\nstop .instead of continuing to evaluate the expression containing\r\nthe function call...*$gdb_prompt $"\ -+ {pass "hit breakpoint on called function"} -+ -re "$gdb_prompt $"\ -+ {fail "hit breakpoint on called function"} -+ timeout {fail "(timeout) hit breakpoint on called function"} -+} -+ -+# As long as we're stopped (breakpointed) in a called function, -+# verify that we can successfully backtrace & such from here. -+# -+# In this and the following test, the _sr4export check apparently is needed -+# for hppa*-*-hpux. -+# -+send_gdb "bt\n" -+gdb_expect { -+ -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*_sr4export.*$gdb_prompt $"\ -+ {pass "backtrace while in called function"} -+ -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*function called from gdb.*$gdb_prompt $"\ -+ {pass "backtrace while in called function"} -+ -re "$gdb_prompt $"\ -+ {fail "backtrace while in called function"} -+ timeout {fail "(timeout) backtrace while in called function"} -+} -+ -+# Return from the called function. For remote targets, it's important to do -+# this before runto_main, which otherwise may silently stop on the dummy -+# breakpoint inserted by GDB at the program's entry point. -+# -+send_gdb "finish\n" -+gdb_expect { -+ -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.* in _sr4export.*$gdb_prompt $"\ -+ {pass "finish from called function"} -+ -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*function called from gdb.*$gdb_prompt $"\ -+ {pass "finish from called function"} -+ -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*Value returned.*$gdb_prompt $"\ -+ {pass "finish from called function"} -+ -re "$gdb_prompt $"\ -+ {fail "finish from called function"} -+ timeout {fail "(timeout) finish from called function"} -+} -+ -+# Verify that GDB responds gracefully to a "finish" command with -+# arguments. -+# -+if ![runto_main] then { fail "break tests suppressed" } -+ -+send_gdb "finish 123\n" -+gdb_expect { -+ -re "The \"finish\" command does not take any arguments.\r\n$gdb_prompt $"\ -+ {pass "finish with arguments disallowed"} -+ -re "$gdb_prompt $"\ -+ {fail "finish with arguments disallowed"} -+ timeout {fail "(timeout) finish with arguments disallowed"} -+} -+ -+# Verify that GDB responds gracefully to a request to "finish" from -+# the outermost frame. On a stub that never exits, this will just -+# run to the stubs routine, so we don't get this error... Thus the -+# second condition. -+# -+ -+send_gdb "finish\n" -+gdb_expect { -+ -re "\"finish\" not meaningful in the outermost frame.\r\n$gdb_prompt $"\ -+ {pass "finish from outermost frame disallowed"} -+ -re "Run till exit from.*\r\n$gdb_prompt $" { -+ pass "finish from outermost frame disallowed" -+ } -+ -re "$gdb_prompt $"\ -+ {fail "finish from outermost frame disallowed"} -+ timeout {fail "(timeout) finish from outermost frame disallowed"} -+} -+ -+# Verify that we can explicitly ask GDB to stop on all shared library -+# events, and that it does so. -+# -+if [istarget "hppa*-*-hpux*"] then { -+ if ![runto_main] then { fail "break tests suppressed" } -+ -+ send_gdb "set stop-on-solib-events 1\n" -+ gdb_expect { -+ -re "$gdb_prompt $"\ -+ {pass "set stop-on-solib-events"} -+ timeout {fail "(timeout) set stop-on-solib-events"} -+ } -+ -+ send_gdb "run\n" -+ gdb_expect { -+ -re ".*Start it from the beginning.*y or n. $"\ -+ {send_gdb "y\n" -+ gdb_expect { -+ -re ".*Stopped due to shared library event.*$gdb_prompt $"\ -+ {pass "triggered stop-on-solib-events"} -+ -re "$gdb_prompt $"\ -+ {fail "triggered stop-on-solib-events"} -+ timeout {fail "(timeout) triggered stop-on-solib-events"} -+ } -+ } -+ -re "$gdb_prompt $"\ -+ {fail "rerun for stop-on-solib-events"} -+ timeout {fail "(timeout) rerun for stop-on-solib-events"} -+ } -+ -+ send_gdb "set stop-on-solib-events 0\n" -+ gdb_expect { -+ -re "$gdb_prompt $"\ -+ {pass "reset stop-on-solib-events"} -+ timeout {fail "(timeout) reset stop-on-solib-events"} -+ } -+} -+ -+# Hardware breakpoints are unsupported on HP-UX. Verify that GDB -+# gracefully responds to requests to create them. -+# -+if [istarget "hppa*-*-hpux*"] then { -+ if ![runto_main] then { fail "break tests suppressed" } -+ -+ send_gdb "hbreak\n" -+ gdb_expect { -+ -re "No hardware breakpoint support in the target.*$gdb_prompt $"\ -+ {pass "hw breaks disallowed"} -+ -re "$gdb_prompt $"\ -+ {fail "hw breaks disallowed"} -+ timeout {fail "(timeout) hw breaks disallowed"} -+ } -+ -+ send_gdb "thbreak\n" -+ gdb_expect { -+ -re "No hardware breakpoint support in the target.*$gdb_prompt $"\ -+ {pass "temporary hw breaks disallowed"} -+ -re "$gdb_prompt $"\ -+ {fail "temporary hw breaks disallowed"} -+ timeout {fail "(timeout) temporary hw breaks disallowed"} -+ } -+} -+ -+#******** -+ -+ -+# -+# Test "next" over recursive function call. -+# -+ -+proc test_next_with_recursion {} { -+ global gdb_prompt -+ global decimal -+ global binfile -+ -+ if [target_info exists use_gdb_stub] { -+ # Reload the program. -+ delete_breakpoints -+ gdb_load ${binfile}; -+ } else { -+ # FIXME: should be using runto -+ gdb_test "kill" "" "kill program" "Kill the program being debugged.*y or n. $" "y" -+ -+ delete_breakpoints -+ } -+ -+ gdb_test "break factorial" "Breakpoint $decimal at .*" "break at factorial" -+ -+ # Run until we call factorial with 6 -+ -+ if [istarget "*-*-vxworks*"] then { -+ send_gdb "run vxmain \"6\"\n" -+ } else { -+ gdb_run_cmd -+ } -+ gdb_expect { -+ -re "Break.* factorial .value=6. .*$gdb_prompt $" {} -+ -re ".*$gdb_prompt $" { -+ fail "run to factorial(6)"; -+ gdb_suppress_tests; -+ } -+ timeout { fail "run to factorial(6) (timeout)" ; gdb_suppress_tests } -+ } -+ -+ # Continue until we call factorial recursively with 5. -+ -+ if [gdb_test "continue" \ -+ "Continuing.*Break.* factorial .value=5. .*" \ -+ "continue to factorial(5)"] then { gdb_suppress_tests } -+ -+ # Do a backtrace just to confirm how many levels deep we are. -+ -+ if [gdb_test "backtrace" \ -+ "#0\[ \t\]+ factorial .value=5..*" \ -+ "backtrace from factorial(5)"] then { gdb_suppress_tests } -+ -+ # Now a "next" should position us at the recursive call, which -+ # we will be performing with 4. -+ -+ if [gdb_test "next" \ -+ ".* factorial .value - 1.;.*" \ -+ "next to recursive call"] then { gdb_suppress_tests } -+ -+ # Disable the breakpoint at the entry to factorial by deleting them all. -+ # The "next" should run until we return to the next line from this -+ # recursive call to factorial with 4. -+ # Buggy versions of gdb will stop instead at the innermost frame on -+ # the line where we are trying to "next" to. -+ -+ delete_breakpoints -+ -+ if [istarget "mips*tx39-*"] { -+ set timeout 60 -+ } -+ # We used to set timeout here for all other targets as well. This -+ # is almost certainly wrong. The proper timeout depends on the -+ # target system in use, and how we communicate with it, so there -+ # is no single value appropriate for all targets. The timeout -+ # should be established by the Dejagnu config file(s) for the -+ # board, and respected by the test suite. -+ # -+ # For example, if I'm running GDB over an SSH tunnel talking to a -+ # portmaster in California talking to an ancient 68k board running -+ # a crummy ROM monitor (a situation I can only wish were -+ # hypothetical), then I need a large timeout. But that's not the -+ # kind of knowledge that belongs in this file. -+ -+ gdb_test next "\[0-9\]*\[\t \]+return \\(value\\);.*" \ -+ "next over recursive call" -+ -+ # OK, we should be back in the same stack frame we started from. -+ # Do a backtrace just to confirm. -+ -+ set result [gdb_test "backtrace" \ -+ "#0\[ \t\]+ factorial .value=120.*\r\n#1\[ \t\]+ \[0-9a-fx\]+ in factorial .value=6..*" \ -+ "backtrace from factorial(5.1)"] -+ if { $result != 0 } { gdb_suppress_tests } -+ -+ if [target_info exists gdb,noresults] { gdb_suppress_tests } -+ gdb_continue_to_end "recursive next test" -+ gdb_stop_suppressing_tests; -+} -+ -+test_next_with_recursion -+ -+ -+#******** -+ -+# build a new file with optimization enabled so that we can try breakpoints -+# on targets with optimized prologues -+ -+set binfileo2 ${objdir}/${subdir}/${testfile}o2 -+ -+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}O0.o" object {debug "additional_flags=-w -O2 -fpie -pie"}] != "" } { -+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -+} -+ -+if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile}O1.o" object {debug "additional_flags=-w -O2 -fpie -pie"}] != "" } { -+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -+} -+ -+if { [gdb_compile "${binfile}O0.o ${binfile}O1.o" "${binfileo2}" executable {debug "additional_flags=-w -fpie -pie"}] != "" } { -+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -+} -+ -+if [get_compiler_info ${binfileo2}] { -+ return -1 -+} -+ -+gdb_exit -+gdb_start -+gdb_reinitialize_dir $srcdir/$subdir -+gdb_load ${binfileo2} -+ -+if [target_info exists gdb_stub] { -+ gdb_step_for_stub; -+} -+ -+# -+# test break at function -+# -+gdb_test "break main" \ -+ "Breakpoint.*at.* file .*$srcfile, line.*" \ -+ "breakpoint function, optimized file" -+ -+# -+# test break at function -+# -+gdb_test "break marker4" \ -+ "Breakpoint.*at.* file .*$srcfile1, line.*" \ -+ "breakpoint small function, optimized file" -+ -+# -+# run until the breakpoint at main is hit. For non-stubs-using targets. -+# -+if ![target_info exists use_gdb_stub] { -+ if [istarget "*-*-vxworks*"] then { -+ send_gdb "run vxmain \"2\"\n" -+ set timeout 120 -+ verbose "Timeout is now $timeout seconds" 2 -+ } else { -+ send_gdb "run\n" -+ } -+ gdb_expect { -+ -re "The program .* has been started already.*y or n. $" { -+ send_gdb "y\n" -+ exp_continue -+ } -+ -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $"\ -+ { pass "run until function breakpoint, optimized file" } -+ -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$gdb_prompt $"\ -+ { pass "run until function breakpoint, optimized file (code motion)" } -+ -re ".*$gdb_prompt $" { fail "run until function breakpoint, optimized file" } -+ timeout { fail "run until function breakpoint, optimized file (timeout)" } -+ } -+} else { -+ if ![target_info exists gdb_stub] { -+ gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.*\{.*" "stub continue, optimized file" -+ } -+} -+ -+# -+# run until the breakpoint at a small function -+# -+ -+# -+# Add a second pass pattern. The behavior differs here between stabs -+# and dwarf for one-line functions. Stabs preserves two line symbols -+# (one before the prologue and one after) with the same line number, -+# but dwarf regards these as duplicates and discards one of them. -+# Therefore the address after the prologue (where the breakpoint is) -+# has no exactly matching line symbol, and GDB reports the breakpoint -+# as if it were in the middle of a line rather than at the beginning. -+ -+set bp_location13 [gdb_get_line_number "set breakpoint 13 here" $srcfile1] -+set bp_location14 [gdb_get_line_number "set breakpoint 14 here" $srcfile1] -+send_gdb "continue\n" -+gdb_expect { -+ -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile1:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" { -+ pass "run until breakpoint set at small function, optimized file" -+ } -+ -re "Breakpoint $decimal, $hex in marker4 \\(d=177601976\\) at .*$srcfile1:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" { -+ pass "run until breakpoint set at small function, optimized file" -+ } -+ -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile1:$bp_location14\[\r\n\]+$bp_location14\[\t \]+void marker4.*" { -+ # marker4() is defined at line 46 when compiled with -DPROTOTYPES -+ pass "run until breakpoint set at small function, optimized file (line bp_location14)" -+ } -+ -re ".*$gdb_prompt " { -+ fail "run until breakpoint set at small function, optimized file" -+ } -+ timeout { -+ fail "run until breakpoint set at small function, optimized file (timeout)" -+ } -+} -+ -+ -+# Reset the default arguments for VxWorks -+if [istarget "*-*-vxworks*"] { -+ set timeout 10 -+ verbose "Timeout is now $timeout seconds" 2 -+ send_gdb "set args main\n" -+ gdb_expect -re ".*$gdb_prompt $" {} -+} -Index: gdb-6.8/gdb/testsuite/gdb.pie/break1.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ gdb-6.8/gdb/testsuite/gdb.pie/break1.c 2008-03-30 08:59:12.000000000 -0700 -@@ -0,0 +1,44 @@ -+/* This testcase is part of GDB, the GNU debugger. -+ -+ Copyright 1992, 1993, 1994, 1995, 1999, 2002, 2003 Free Software -+ Foundation, Inc. -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the Free Software -+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ -+ Please email any bugs, comments, and/or additions to this file to: -+ bug-gdb@prep.ai.mit.edu */ -+ -+/* The code for this file was extracted from the gdb testsuite -+ testcase "break.c". */ -+ -+/* The following functions do nothing useful. They are included -+ simply as places to try setting breakpoints at. They are -+ explicitly "one-line functions" to verify that this case works -+ (some versions of gcc have or have had problems with this). -+ -+ These functions are in a separate source file to prevent an -+ optimizing compiler from inlining them and optimizing them away. */ -+ -+#ifdef PROTOTYPES -+int marker1 (void) { return (0); } /* set breakpoint 15 here */ -+int marker2 (int a) { return (1); } /* set breakpoint 8 here */ -+void marker3 (char *a, char *b) {} /* set breakpoint 17 here */ -+void marker4 (long d) {} /* set breakpoint 14 here */ -+#else -+int marker1 () { return (0); } /* set breakpoint 16 here */ -+int marker2 (a) int a; { return (1); } /* set breakpoint 9 here */ -+void marker3 (a, b) char *a, *b; {} /* set breakpoint 18 here */ -+void marker4 (d) long d; {} /* set breakpoint 13 here */ -+#endif -Index: gdb-6.8/gdb/testsuite/gdb.pie/corefile.exp -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ gdb-6.8/gdb/testsuite/gdb.pie/corefile.exp 2008-03-30 08:59:12.000000000 -0700 -@@ -0,0 +1,243 @@ -+# Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 -+# Free Software Foundation, Inc. -+ -+# This program is free software; you can redistribute it and/or modify -+# it under the terms of the GNU General Public License as published by -+# the Free Software Foundation; either version 2 of the License, or -+# (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ -+# Please email any bugs, comments, and/or additions to this file to: -+# bug-gdb@prep.ai.mit.edu -+ -+# This file was written by Fred Fish. (fnf@cygnus.com) -+ -+if $tracelevel then { -+ strace $tracelevel -+} -+ -+set prms_id 0 -+set bug_id 0 -+ -+# are we on a target board -+if ![isnative] then { -+ return -+} -+ -+set testfile "coremaker" -+set srcfile ${testfile}.c -+set binfile ${objdir}/${subdir}/${testfile} -+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug "additional_flags=-fpie -pie"}] != "" } { -+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." -+} -+ -+# Create and source the file that provides information about the compiler -+# used to compile the test case. -+if [get_compiler_info ${binfile}] { -+ return -1; -+} -+ -+# Create a core file named "corefile" rather than just "core", to -+# avoid problems with sys admin types that like to regularly prune all -+# files named "core" from the system. -+# -+# Arbitrarily try setting the core size limit to "unlimited" since -+# this does not hurt on systems where the command does not work and -+# allows us to generate a core on systems where it does. -+# -+# Some systems append "core" to the name of the program; others append -+# the name of the program to "core"; still others (like Linux, as of -+# May 2003) create cores named "core.PID". In the latter case, we -+# could have many core files lying around, and it may be difficult to -+# tell which one is ours, so let's run the program in a subdirectory. -+set found 0 -+set coredir "${objdir}/${subdir}/coredir.[getpid]" -+file mkdir $coredir -+catch "system \"(cd ${coredir}; ulimit -c unlimited; ${binfile}; true) >/dev/null 2>&1\"" -+# remote_exec host "${binfile}" -+foreach i "${coredir}/core ${coredir}/core.coremaker.c ${binfile}.core" { -+ if [remote_file build exists $i] { -+ remote_exec build "mv $i ${objdir}/${subdir}/corefile" -+ set found 1 -+ } -+} -+# Check for "core.PID". -+if { $found == 0 } { -+ set names [glob -nocomplain -directory $coredir core.*] -+ if {[llength $names] == 1} { -+ set corefile [file join $coredir [lindex $names 0]] -+ remote_exec build "mv $corefile ${objdir}/${subdir}/corefile" -+ set found 1 -+ } -+} -+if { $found == 0 } { -+ # The braindamaged HPUX shell quits after the ulimit -c above -+ # without executing ${binfile}. So we try again without the -+ # ulimit here if we didn't find a core file above. -+ # Oh, I should mention that any "braindamaged" non-Unix system has -+ # the same problem. I like the cd bit too, it's really neat'n stuff. -+ catch "system \"(cd ${objdir}/${subdir}; ${binfile}; true) >/dev/null 2>&1\"" -+ foreach i "${objdir}/${subdir}/core ${objdir}/${subdir}/core.coremaker.c ${binfile}.core" { -+ if [remote_file build exists $i] { -+ remote_exec build "mv $i ${objdir}/${subdir}/corefile" -+ set found 1 -+ } -+ } -+} -+ -+# Try to clean up after ourselves. -+remote_file build delete [file join $coredir coremmap.data] -+remote_exec build "rmdir $coredir" -+ -+if { $found == 0 } { -+ warning "can't generate a core file - core tests suppressed - check ulimit -c" -+ return 0 -+} -+ -+# -+# Test that we can simply startup with a "-core=corefile" command line arg -+# and recognize that the core file is a valid, usable core file. -+# To do this, we must shutdown the currently running gdb and restart -+# with the -core args. We can't use gdb_start because it looks for -+# the first gdb prompt, and the message we are looking for occurs -+# before the first prompt. Also, we can't include GDBFLAGS because -+# if it is empty, this confuses gdb with an empty argument that it -+# grumbles about (said grumbling currently being ignored in gdb_start). -+# **FIXME** -+# -+# Another problem is that on some systems (solaris for example), there -+# is apparently a limit on the length of a fully specified path to -+# the coremaker executable, at about 80 chars. For this case, consider -+# it a pass, but note that the program name is bad. -+ -+gdb_exit -+if $verbose>1 then { -+ send_user "Spawning $GDB -nw $GDBFLAGS -core=$objdir/$subdir/corefile\n" -+} -+ -+set oldtimeout $timeout -+set timeout [expr "$timeout + 60"] -+verbose "Timeout is now $timeout seconds" 2 -+eval "spawn $GDB -nw $GDBFLAGS -core=$objdir/$subdir/corefile" -+expect { -+ -re "Couldn't find .* registers in core file.*$gdb_prompt $" { -+ fail "args: -core=corefile (couldn't find regs)" -+ } -+ -re "Core was generated by .*coremaker.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { -+ pass "args: -core=corefile" -+ } -+ -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { -+ pass "args: -core=corefile (with bad program name)" -+ } -+ -re ".*registers from core file: File in wrong format.* $" { -+ fail "args: -core=corefile (could not read registers from core file)" -+ } -+ -re ".*$gdb_prompt $" { fail "args: -core=corefile" } -+ timeout { fail "(timeout) starting with -core" } -+} -+ -+ -+# -+# Test that startup with both an executable file and -core argument. -+# See previous comments above, they are still applicable. -+# -+ -+close; -+ -+if $verbose>1 then { -+ send_user "Spawning $GDB -nw $GDBFLAGS $binfile -core=$objdir/$subdir/corefile\n" -+} -+ -+ -+eval "spawn $GDB -nw $GDBFLAGS $binfile -core=$objdir/$subdir/corefile"; -+expect { -+ -re "Core was generated by .*coremaker.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { -+ pass "args: execfile -core=corefile" -+ } -+ -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { -+ pass "args: execfile -core=corefile (with bad program name)" -+ } -+ -re ".*registers from core file: File in wrong format.* $" { -+ fail "args: execfile -core=corefile (could not read registers from core file)" -+ } -+ -re ".*$gdb_prompt $" { fail "args: execfile -core=corefile" } -+ timeout { fail "(timeout) starting with -core" } -+} -+set timeout $oldtimeout -+verbose "Timeout is now $timeout seconds" 2 -+ -+close; -+ -+# Now restart normally. -+ -+gdb_start -+gdb_reinitialize_dir $srcdir/$subdir -+gdb_load ${binfile} -+ -+# Test basic corefile recognition via core-file command. -+ -+send_gdb "core-file $objdir/$subdir/corefile\n" -+gdb_expect { -+ -re ".* program is being debugged already.*y or n. $" { -+ # gdb_load may connect us to a gdbserver. -+ send_gdb "y\n" -+ exp_continue; -+ } -+ -re "Core was generated by .*coremaker.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { -+ pass "core-file command" -+ } -+ -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { -+ pass "core-file command (with bad program name)" -+ } -+ -re ".*registers from core file: File in wrong format.* $" { -+ fail "core-file command (could not read registers from core file)" -+ } -+ -re ".*$gdb_prompt $" { fail "core-file command" } -+ timeout { fail "(timeout) core-file command" } -+} -+ -+# Test correct mapping of corefile sections by printing some variables. -+ -+gdb_test "print coremaker_data" "\\\$$decimal = 202" -+gdb_test "print coremaker_bss" "\\\$$decimal = 10" -+gdb_test "print coremaker_ro" "\\\$$decimal = 201" -+ -+gdb_test "print func2::coremaker_local" "\\\$$decimal = \\{0, 1, 2, 3, 4\\}" -+ -+# Somehow we better test the ability to read the registers out of the core -+# file correctly. I don't think the other tests do this. -+ -+gdb_test "bt" "abort.*func2.*func1.*main.*" "backtrace in corefile.exp" -+gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(.*\\).*" "up in corefile.exp" -+ -+# Test ability to read mmap'd data -+ -+gdb_test "x/8bd buf1" ".*:.*0.*1.*2.*3.*4.*5.*6.*7" "accessing original mmap data in core file" -+setup_xfail "*-*-sunos*" "*-*-ultrix*" "*-*-aix*" -+set test "accessing mmapped data in core file" -+gdb_test_multiple "x/8bd buf2" "$test" { -+ -re ".*:.*0.*1.*2.*3.*4.*5.*6.*7.*$gdb_prompt $" { -+ pass "$test" -+ } -+ -re "0x\[f\]*:.*Cannot access memory at address 0x\[f\]*.*$gdb_prompt $" { -+ fail "$test (mapping failed at runtime)" -+ } -+ -re "0x.*:.*Cannot access memory at address 0x.*$gdb_prompt $" { -+ fail "$test (mapping address not found in core file)" -+ } -+} -+ -+# test reinit_frame_cache -+ -+gdb_load ${binfile} -+gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(\\).*" "up in corefile.exp (reinit)" -+ -+gdb_test "core" "No core file now." -Index: gdb-6.8/gdb/testsuite/gdb.pie/coremaker.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ gdb-6.8/gdb/testsuite/gdb.pie/coremaker.c 2008-03-30 08:59:12.000000000 -0700 -@@ -0,0 +1,142 @@ -+/* Copyright 1992, 1993, 1994, 1995, 1996, 1999 -+ Free Software Foundation, Inc. -+ -+ This file is part of GDB. -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 2 of the License, or (at -+ your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, but -+ WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program; if not, write to the Free Software -+ Foundation, Inc., 59 Temple Place - Suite 330, -+ Boston, MA 02111-1307, USA. */ -+ -+/* Simple little program that just generates a core dump from inside some -+ nested function calls. */ -+ -+#include <stdio.h> -+#include <sys/types.h> -+#include <fcntl.h> -+#include <sys/mman.h> -+#include <signal.h> -+#include <stdlib.h> -+#include <unistd.h> -+ -+#ifndef __STDC__ -+#define const /**/ -+#endif -+ -+#define MAPSIZE (8 * 1024) -+ -+/* Don't make these automatic vars or we will have to walk back up the -+ stack to access them. */ -+ -+char *buf1; -+char *buf2; -+ -+int coremaker_data = 1; /* In Data section */ -+int coremaker_bss; /* In BSS section */ -+ -+const int coremaker_ro = 201; /* In Read-Only Data section */ -+ -+/* Note that if the mapping fails for any reason, we set buf2 -+ to -1 and the testsuite notices this and reports it as -+ a failure due to a mapping error. This way we don't have -+ to test for specific errors when running the core maker. */ -+ -+void -+mmapdata () -+{ -+ int j, fd; -+ -+ /* Allocate and initialize a buffer that will be used to write -+ the file that is later mapped in. */ -+ -+ buf1 = (char *) malloc (MAPSIZE); -+ for (j = 0; j < MAPSIZE; ++j) -+ { -+ buf1[j] = j; -+ } -+ -+ /* Write the file to map in */ -+ -+ fd = open ("coremmap.data", O_CREAT | O_RDWR, 0666); -+ if (fd == -1) -+ { -+ perror ("coremmap.data open failed"); -+ buf2 = (char *) -1; -+ return; -+ } -+ write (fd, buf1, MAPSIZE); -+ -+ /* Now map the file into our address space as buf2 */ -+ -+ buf2 = (char *) mmap (0, MAPSIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); -+ if (buf2 == (char *) -1) -+ { -+ perror ("mmap failed"); -+ return; -+ } -+ -+ /* Verify that the original data and the mapped data are identical. -+ If not, we'd rather fail now than when trying to access the mapped -+ data from the core file. */ -+ -+ for (j = 0; j < MAPSIZE; ++j) -+ { -+ if (buf1[j] != buf2[j]) -+ { -+ fprintf (stderr, "mapped data is incorrect"); -+ buf2 = (char *) -1; -+ return; -+ } -+ } -+} -+ -+void -+func2 () -+{ -+ int coremaker_local[5]; -+ int i; -+ -+#ifdef SA_FULLDUMP -+ /* Force a corefile that includes the data section for AIX. */ -+ { -+ struct sigaction sa; -+ -+ sigaction (SIGABRT, (struct sigaction *)0, &sa); -+ sa.sa_flags |= SA_FULLDUMP; -+ sigaction (SIGABRT, &sa, (struct sigaction *)0); -+ } -+#endif -+ -+ /* Make sure that coremaker_local doesn't get optimized away. */ -+ for (i = 0; i < 5; i++) -+ coremaker_local[i] = i; -+ coremaker_bss = 0; -+ for (i = 0; i < 5; i++) -+ coremaker_bss += coremaker_local[i]; -+ coremaker_data = coremaker_ro + 1; -+ abort (); -+} -+ -+void -+func1 () -+{ -+ func2 (); -+} -+ -+int main () -+{ -+ mmapdata (); -+ func1 (); -+ return 0; -+} -+ |