diff options
Diffstat (limited to 'main/monit/monitrc')
| -rw-r--r-- | main/monit/monitrc | 80 |
1 files changed, 40 insertions, 40 deletions
diff --git a/main/monit/monitrc b/main/monit/monitrc index d454d9bea4..816ff07697 100644 --- a/main/monit/monitrc +++ b/main/monit/monitrc @@ -5,8 +5,8 @@ ## Comments begin with a '#' and extend through the end of the line. Keywords ## are case insensitive. All path's MUST BE FULLY QUALIFIED, starting with '/'. ## -## Below you will find examples of some frequently used statements. For -## information about the control file and a complete list of statements and +## Below you will find examples of some frequently used statements. For +## information about the control file and a complete list of statements and ## options, please have a look in the Monit manual. ## ## @@ -17,19 +17,19 @@ ## Start Monit in the background (run as a daemon): # set daemon 60 # check services at 1-minute intervals -# with start delay 240 # optional: delay the first check by 4-minutes (by +# with start delay 240 # optional: delay the first check by 4-minutes (by # # default Monit check immediately after Monit start) # # ## Set syslog logging with the 'daemon' facility. If the FACILITY option is -## omitted, Monit will use 'user' facility by default. If you want to log to +## omitted, Monit will use 'user' facility by default. If you want to log to ## a standalone log file instead, specify the full path to the log file # -# set logfile syslog facility log_daemon +# set logfile syslog facility log_daemon # # ## Set the location of the Monit id file which stores the unique id for the -## Monit instance. The id is generated and stored on first Monit start. By +## Monit instance. The id is generated and stored on first Monit start. By ## default the file is placed in $HOME/.monit.id. # # set idfile /var/.monit.id @@ -42,9 +42,9 @@ set daemon 60 # check services at 1-minute intervals # # set statefile /var/.monit.state # -## Set the list of mail servers for alert delivery. Multiple servers may be -## specified using a comma separator. If the first mail server fails, Monit -# will use the second mail server in the list and so on. By default Monit uses +## Set the list of mail servers for alert delivery. Multiple servers may be +## specified using a comma separator. If the first mail server fails, Monit +# will use the second mail server in the list and so on. By default Monit uses # port 25 - it is possible to override this with the PORT option. # # set mailserver mail.bar.baz, # primary mailserver @@ -52,11 +52,11 @@ set daemon 60 # check services at 1-minute intervals # localhost # fallback relay # # -## By default Monit will drop alert events if no mail servers are available. -## If you want to keep the alerts for later delivery retry, you can use the -## EVENTQUEUE statement. The base directory where undelivered alerts will be +## By default Monit will drop alert events if no mail servers are available. +## If you want to keep the alerts for later delivery retry, you can use the +## EVENTQUEUE statement. The base directory where undelivered alerts will be ## stored is specified by the BASEDIR option. You can limit the maximal queue -## size using the SLOTS option (if omitted, the queue is limited by space +## size using the SLOTS option (if omitted, the queue is limited by space ## available in the back end filesystem). # # set eventqueue @@ -64,11 +64,11 @@ set daemon 60 # check services at 1-minute intervals # slots 100 # optionally limit the queue size # # -## Send status and events to M/Monit (for more informations about M/Monit -## see http://mmonit.com/). By default Monit registers credentials with +## Send status and events to M/Monit (for more informations about M/Monit +## see http://mmonit.com/). By default Monit registers credentials with ## M/Monit so M/Monit can smoothly communicate back to Monit and you don't ## have to register Monit credentials manually in M/Monit. It is possible to -## disable credential registration using the commented out option below. +## disable credential registration using the commented out option below. ## Though, if safety is a concern we recommend instead using https when ## communicating with M/Monit and send credentials encrypted. # @@ -100,25 +100,25 @@ set daemon 60 # check services at 1-minute intervals # set mail-format { from: monit@foo.bar } # # -## You can set alert recipients whom will receive alerts if/when a -## service defined in this file has errors. Alerts may be restricted on -## events by using a filter as in the second example below. +## You can set alert recipients whom will receive alerts if/when a +## service defined in this file has errors. Alerts may be restricted on +## events by using a filter as in the second example below. # # set alert sysadm@foo.bar # receive all alerts ## Do not alert when Monit start,stop or perform a user initiated action -# set alert manager@foo.bar not on { instance, action } +# set alert manager@foo.bar not on { instance, action } # # -## Monit has an embedded web server which can be used to view status of +## Monit has an embedded web server which can be used to view status of ## services monitored and manage services from a web interface. See the -## Monit Wiki if you want to enable SSL for the web server. +## Monit Wiki if you want to enable SSL for the web server. # set httpd port 2812 and use address localhost # only accept connection from localhost allow localhost # allow localhost to connect to the server and allow admin:monit # require user 'admin' with password 'monit' # allow @monit # allow users of group 'monit' to connect (rw) - allow @users readonly # allow users of group 'users' to connect readonly +# allow @users readonly # allow users of group 'users' to connect readonly ############################################################################### ## Services @@ -137,15 +137,15 @@ set httpd port 2812 and # if cpu usage (system) > 30% then alert # if cpu usage (wait) > 20% then alert # -# +# ## Check if a file exists, checksum, permissions, uid and gid. In addition -## to alert recipients in the global section, customized alert can be sent to -## additional recipients by specifying a local alert handler. The service may +## to alert recipients in the global section, customized alert can be sent to +## additional recipients by specifying a local alert handler. The service may ## be grouped using the GROUP option. More than one group can be specified by ## repeating the 'group name' statement. -# +# # check file apache_bin with path /usr/local/apache/bin/httpd -# if failed checksum and +# if failed checksum and # expect the sum 8f7f419955cefa0b33a2ba316cba3659 then unmonitor # if failed permission 755 then unmonitor # if failed uid root then unmonitor @@ -155,15 +155,15 @@ set httpd port 2812 and # } with the mail-format { subject: Alarm! } # group server # -# +# ## Check that a process is running, in this case Apache, and that it respond ## to HTTP and HTTPS requests. Check its resource usage such as cpu and memory, -## and number of children. If the process is not running, Monit will restart -## it by default. In case the service is restarted very often and the +## and number of children. If the process is not running, Monit will restart +## it by default. In case the service is restarted very often and the ## problem remains, it is possible to disable monitoring using the TIMEOUT ## statement. This service depends on another service (apache_bin) which ## is defined above. -# +# # check process apache with pidfile /usr/local/apache/logs/httpd.pid # start program = "/etc/init.d/httpd start" with timeout 60 seconds # stop program = "/etc/init.d/httpd stop" @@ -172,7 +172,7 @@ set httpd port 2812 and # if totalmem > 200.0 MB for 5 cycles then restart # if children > 250 then restart # if loadavg(5min) greater than 10 for 8 cycles then stop -# if failed host www.tildeslash.com port 80 protocol http +# if failed host www.tildeslash.com port 80 protocol http # and request "/somefile.html" # then restart # if failed port 443 type tcpssl protocol http @@ -181,8 +181,8 @@ set httpd port 2812 and # if 3 restarts within 5 cycles then timeout # depends on apache_bin # group server -# -# +# +# ## Check filesystem permissions, uid, gid, space and inode usage. Other services, ## such as databases, may depend on this resource and an automatically graceful ## stop may be cascaded to them before the filesystem will become full and data @@ -201,7 +201,7 @@ set httpd port 2812 and # group server # # -## Check a file's timestamp. In this example, we test if a file is older +## Check a file's timestamp. In this example, we test if a file is older ## than 15 minutes and assume something is wrong if its not updated. Also, ## if the file size exceed a given limit, execute a script # @@ -213,8 +213,8 @@ set httpd port 2812 and # if size > 100 MB then exec "/my/cleanup/script" as uid dba and gid dba # # -## Check directory permission, uid and gid. An event is triggered if the -## directory does not belong to the user with uid 0 and gid 0. In addition, +## Check directory permission, uid and gid. An event is triggered if the +## directory does not belong to the user with uid 0 and gid 0. In addition, ## the permissions have to match the octal description of 755 (see chmod(1)). # # check directory bin with path /bin @@ -223,8 +223,8 @@ set httpd port 2812 and # if failed gid 0 then unmonitor # # -## Check a remote host availability by issuing a ping test and check the -## content of a response from a web server. Up to three pings are sent and +## Check a remote host availability by issuing a ping test and check the +## content of a response from a web server. Up to three pings are sent and ## connection to a port and an application level network check is performed. # # check host myserver with address 192.168.1.1 |