# Config file for /etc/init.d/ser2net

# Set the configuration file to one other than the default of /etc/ser2net.conf
#
#CONFIG_FILE="/etc/ser2net.conf"

# Enables the control port and sets the TCP port to listen to for the control port.
# A port number may be of the form [host,]port, such as 127.0.0.1,2000 or localhost,2000.
# If this is specified, it will only bind to the IP address specified for the port.
# Otherwise, it will bind to all the addresses on the machine.
#
#CONTROL_PORT=""

# Cisco IOS uses a different mechanism for specifying the baud rates than the mechanism
# described in RFC2217. This option sets the IOS version of setting the baud rates.
# The default is RFC2217s.
#
#CISCO_IOS="yes"

# Enable or disable UUCP locking (default=yes)
#
#UUCP_LOCKS="no"

# see the ser2net(8) manual page for additional options you can configure here
#
#EXTRA_OPTS=""