path: root/main/openssh/openssh-dynwindow_noneswitch.diff

diff --git a/HPN-README b/HPN-README
new file mode 100644
index 0000000..72d822f
--- /dev/null
+++ b/HPN-README
@@ -0,0 +1,128 @@
+Notes:
+
+MULTI-THREADED CIPHER:
+The AES cipher in CTR mode has been multithreaded (MTR-AES-CTR). This will allow ssh installations
+on hosts with multiple cores to use more than one processing core during encryption.
+Tests have show significant throughput performance increases when using MTR-AES-CTR up
+to and including a full gigabit per second on quad core systems. It should be possible to
+achieve full line rate on dual core systems but OS and data management overhead makes this
+more difficult to achieve. The cipher stream from MTR-AES-CTR is entirely compatible with single
+thread AES-CTR (ST-AES-CTR) implementations and should be 100% backward compatible. Optimal
+performance requires the MTR-AES-CTR mode be enabled on both ends of the connection.
+The MTR-AES-CTR replaces ST-AES-CTR and is used in exactly the same way with the same
+nomenclature.
+Use examples: 	ssh -caes128-ctr you@host.com
+		scp -oCipher=aes256-ctr file you@host.com:~/file
+
+NONE CIPHER:
+To use the NONE option you must have the NoneEnabled switch set on the server and
+you *must* have *both* NoneEnabled and NoneSwitch set to yes on the client. The NONE
+feature works with ALL ssh subsystems (as far as we can tell) *AS LONG AS* a tty is not
+spawned. If a user uses the -T switch to prevent a tty being created the NONE cipher will
+be disabled.
+
+The performance increase will only be as good as the network and TCP stack tuning
+on the reciever side of the connection allows. As a rule of thumb a user will need
+at least 10Mb/s connection with a 100ms RTT to see a doubling of performance. The
+HPN-SSH home page describes this in greater detail.
+
+http://www.psc.edu/networking/projects/hpn-ssh
+
+BUFFER SIZES:
+
+If HPN is disabled the receive buffer size will be set to the
+OpenSSH default of 64K.
+
+If an HPN system connects to a nonHPN system the receive buffer will
+be set to the HPNBufferSize value. The default is 2MB but user adjustable.
+
+If an HPN to HPN connection is established a number of different things might
+happen based on the user options and conditions.
+
+Conditions: HPNBufferSize NOT Set, TCPRcvBufPoll enabled, TCPRcvBuf NOT Set
+HPN Buffer Size = up to 64MB
+This is the default state. The HPN buffer size will grow to a maximum of 64MB
+as the TCP receive buffer grows. The maximum HPN Buffer size of 64MB is
+geared towards 10GigE transcontinental connections.
+
+Conditions: HPNBufferSize NOT Set, TCPRcvBufPoll disabled, TCPRcvBuf NOT Set
+HPN Buffer Size = TCP receive buffer value.
+Users on non-autotuning systesm should disable TCPRcvBufPoll in the
+ssh_cofig and sshd_config
+
+Conditions: HPNBufferSize SET, TCPRcvBufPoll disabled, TCPRcvBuf NOT Set
+HPN Buffer Size = minmum of TCP receive buffer and HPNBufferSize.
+This would be the system defined TCP receive buffer (RWIN).
+
+Conditions: HPNBufferSize SET, TCPRcvBufPoll disabled, TCPRcvBuf SET
+HPN Buffer Size = minmum of TCPRcvBuf and HPNBufferSize.
+Generally there is no need to set both.
+
+Conditions: HPNBufferSize SET, TCPRcvBufPoll enabled, TCPRcvBuf NOT Set
+HPN Buffer Size = grows to HPNBufferSize
+The buffer will grow up to the maximum size specified here.
+
+Conditions: HPNBufferSize SET, TCPRcvBufPoll enabled, TCPRcvBuf SET
+HPN Buffer Size = minmum of TCPRcvBuf and HPNBufferSize.
+Generally there is no need to set both of these, especially on autotuning
+systems. However, if the users wishes to override the autotuning this would be
+one way to do it.
+
+Conditions: HPNBufferSize NOT Set, TCPRcvBufPoll enabled, TCPRcvBuf SET
+HPN Buffer Size = TCPRcvBuf.
+This will override autotuning and set the TCP recieve buffer to the user defined
+value.
+
+
+HPN Specific Configuration options
+
+TcpRcvBuf=[int]KB client
+      set the TCP socket receive buffer to n Kilobytes. It can be set up to the
+maximum socket size allowed by the system. This is useful in situations where
+the tcp receive window is set low but the maximum buffer size is set
+higher (as is typical). This works on a per TCP connection basis. You can also
+use this to artifically limit the transfer rate of the connection. In these
+cases the throughput will be no more than n/RTT. The minimum buffer size is 1KB.
+Default is the current system wide tcp receive buffer size.
+
+TcpRcvBufPoll=[yes/no] client/server
+      enable of disable the polling of the tcp receive buffer through the life
+of the connection. You would want to make sure that this option is enabled
+for systems making use of autotuning kernels (linux 2.4.24+, 2.6, MS Vista)
+default is yes.
+
+NoneEnabled=[yes/no] client/server
+      enable or disable the use of the None cipher. Care must always be used
+when enabling this as it will allow users to send data in the clear. However,
+it is important to note that authentication information remains encrypted
+even if this option is enabled. Set to no by default.
+
+NoneSwitch=[yes/no] client
+     Switch the encryption cipher being used to the None cipher after
+authentication takes place. NoneEnabled must be enabled on both the client
+and server side of the connection. When the connection switches to the NONE
+cipher a warning is sent to STDERR. The connection attempt will fail with an
+error if a client requests a NoneSwitch from the server that does not explicitly
+have NoneEnabled set to yes. Note: The NONE cipher cannot be used in
+interactive (shell) sessions and it will fail silently. Set to no by default.
+
+HPNDisabled=[yes/no] client/server
+     In some situations, such as transfers on a local area network, the impact
+of the HPN code produces a net decrease in performance. In these cases it is
+helpful to disable the HPN functionality. By default HPNDisabled is set to no.
+
+HPNBufferSize=[int]KB client/server
+     This is the default buffer size the HPN functionality uses when interacting
+with nonHPN SSH installations. Conceptually this is similar to the TcpRcvBuf
+option as applied to the internal SSH flow control. This value can range from
+1KB to 64MB (1-65536). Use of oversized or undersized buffers can cause performance
+problems depending on the length of the network path. The default size of this buffer
+is 2MB.
+
+
+Credits: This patch was conceived, designed, and led by Chris Rapier (rapier@psc.edu)
+         The majority of the actual coding for versions up to HPN12v1 was performed
+         by Michael Stevens (mstevens@andrew.cmu.edu). The MT-AES-CTR cipher was
+	 implemented by Ben Bennet (ben@psc.edu). This work was financed, in part,
+         by Cisco System, Inc., the National Library of Medicine,
+	 and the National Science Foundation.
diff --git a/auth2.c b/auth2.c
index e367a10..da46852 100644
--- a/auth2.c
+++ b/auth2.c
@@ -49,6 +49,7 @@
 #include "dispatch.h"
 #include "pathnames.h"
 #include "buffer.h"
+#include "canohost.h"
 
 #ifdef GSSAPI
 #include "ssh-gss.h"
@@ -75,6 +76,9 @@ extern Authmethod method_gssapi;
 extern Authmethod method_jpake;
 #endif
 
+static int log_flag = 0;
+
+
 Authmethod *authmethods[] = {
 	&method_none,
 	&method_pubkey,
@@ -227,6 +231,11 @@ input_userauth_request(int type, u_int32_t seq, void *ctxt)
 	service = packet_get_cstring(NULL);
 	method = packet_get_cstring(NULL);
 	debug("userauth-request for user %s service %s method %s", user, service, method);
+	if (!log_flag) {
+		logit("SSH: Server;Ltype: Authname;Remote: %s-%d;Name: %s",
+		      get_remote_ipaddr(), get_remote_port(), user);
+		log_flag = 1;
+	}
 	debug("attempt %d failures %d", authctxt->attempt, authctxt->failures);
 
 	if ((style = strchr(user, ':')) != NULL)
diff --git a/buffer.c b/buffer.c
index ae97003..dc21850 100644
--- a/buffer.c
+++ b/buffer.c
@@ -127,7 +127,7 @@ restart:
 
 	/* Increase the size of the buffer and retry. */
 	newlen = roundup(buffer->alloc + len, BUFFER_ALLOCSZ);
-	if (newlen > BUFFER_MAX_LEN)
+	if (newlen > BUFFER_MAX_LEN_HPN)
 		fatal("buffer_append_space: alloc %u not supported",
 		    newlen);
 	buffer->buf = xrealloc(buffer->buf, 1, newlen);
diff --git a/buffer.h b/buffer.h
index e2a9dd1..2c0b65c 100644
--- a/buffer.h
+++ b/buffer.h
@@ -16,6 +16,9 @@
 #ifndef BUFFER_H
 #define BUFFER_H
 
+/* move the following to a more appropriate place and name */
+#define BUFFER_MAX_LEN_HPN          0x4000000  /* 64MB */
+
 typedef struct {
 	u_char	*buf;		/* Buffer for data. */
 	u_int	 alloc;		/* Number of bytes allocated for data. */
diff --git a/channels.c b/channels.c
index 9cf85a3..862bfd3 100644
--- a/channels.c
+++ b/channels.c
@@ -173,8 +173,14 @@ static void port_open_helper(Channel *c, char *rtype);
 static int connect_next(struct channel_connect *);
 static void channel_connect_ctx_free(struct channel_connect *);
 
+
+static int hpn_disabled = 0;
+static int hpn_buffer_size = 2 * 1024 * 1024;
+
 /* -- channel core */
 
+
+
 Channel *
 channel_by_id(int id)
 {
@@ -319,6 +325,7 @@ channel_new(char *ctype, int type, int rfd, int wfd, int efd,
 	c->local_window_max = window;
 	c->local_consumed = 0;
 	c->local_maxpacket = maxpack;
+	c->dynamic_window = 0;
 	c->remote_id = -1;
 	c->remote_name = xstrdup(remote_name);
 	c->remote_window = 0;
@@ -818,11 +825,35 @@ channel_pre_open_13(Channel *c, fd_set *readset, fd_set *writeset)
 		FD_SET(c->sock, writeset);
 }
 
+int channel_tcpwinsz () {
+        u_int32_t tcpwinsz = 0;
+        socklen_t optsz = sizeof(tcpwinsz);
+	int ret = -1;
+
+	/* if we aren't on a socket return 128KB*/
+	if(!packet_connection_is_on_socket())
+	    return(128*1024);
+	ret = getsockopt(packet_get_connection_in(),
+			 SOL_SOCKET, SO_RCVBUF, &tcpwinsz, &optsz);
+	/* return no more than 64MB */
+	if ((ret == 0) && tcpwinsz > BUFFER_MAX_LEN_HPN)
+	    tcpwinsz = BUFFER_MAX_LEN_HPN;
+	debug2("tcpwinsz: %d for connection: %d", tcpwinsz,
+	       packet_get_connection_in());
+	return(tcpwinsz);
+}
+
 static void
 channel_pre_open(Channel *c, fd_set *readset, fd_set *writeset)
 {
 	u_int limit = compat20 ? c->remote_window : packet_get_maxsize();
 
+	/* check buffer limits */
+	if ((!c->tcpwinsz) || (c->dynamic_window > 0))
+		c->tcpwinsz = channel_tcpwinsz();
+
+	limit = MIN(limit, 2 * c->tcpwinsz);
+
 	if (c->istate == CHAN_INPUT_OPEN &&
 	    limit > 0 &&
 	    buffer_len(&c->input) < limit &&
@@ -1806,14 +1837,21 @@ channel_check_window(Channel *c)
 	    c->local_maxpacket*3) ||
 	    c->local_window < c->local_window_max/2) &&
 	    c->local_consumed > 0) {
+		u_int addition = 0;
+		/* adjust max window size if we are in a dynamic environment */
+		if (c->dynamic_window && (c->tcpwinsz > c->local_window_max)) {
+			/* grow the window somewhat aggressively to maintain pressure */
+			addition = 1.5*(c->tcpwinsz - c->local_window_max);
+			c->local_window_max += addition;
+		}
 		packet_start(SSH2_MSG_CHANNEL_WINDOW_ADJUST);
 		packet_put_int(c->remote_id);
-		packet_put_int(c->local_consumed);
+		packet_put_int(c->local_consumed + addition);
 		packet_send();
 		debug2("channel %d: window %d sent adjust %d",
 		    c->self, c->local_window,
 		    c->local_consumed);
-		c->local_window += c->local_consumed;
+		c->local_window += c->local_consumed + addition;
 		c->local_consumed = 0;
 	}
 	return 1;
@@ -2173,11 +2211,12 @@ channel_after_select(fd_set *readset, fd_set *writeset)
 
 
 /* If there is data to send to the connection, enqueue some of it now. */
-void
+int
 channel_output_poll(void)
 {
 	Channel *c;
 	u_int i, len;
+	int packet_length = 0;
 
 	for (i = 0; i < channels_alloc; i++) {
 		c = channels[i];
@@ -2225,7 +2264,7 @@ channel_output_poll(void)
 					packet_start(SSH2_MSG_CHANNEL_DATA);
 					packet_put_int(c->remote_id);
 					packet_put_string(data, dlen);
-					packet_send();
+					packet_length = packet_send();
 					c->remote_window -= dlen + 4;
 					xfree(data);
 				}
@@ -2255,7 +2294,7 @@ channel_output_poll(void)
 				    SSH2_MSG_CHANNEL_DATA : SSH_MSG_CHANNEL_DATA);
 				packet_put_int(c->remote_id);
 				packet_put_string(buffer_ptr(&c->input), len);
-				packet_send();
+				packet_length = packet_send();
 				buffer_consume(&c->input, len);
 				c->remote_window -= len;
 			}
@@ -2290,12 +2329,13 @@ channel_output_poll(void)
 			packet_put_int(c->remote_id);
 			packet_put_int(SSH2_EXTENDED_DATA_STDERR);
 			packet_put_string(buffer_ptr(&c->extended), len);
-			packet_send();
+			packet_length = packet_send();
 			buffer_consume(&c->extended, len);
 			c->remote_window -= len;
 			debug2("channel %d: sent ext data %d", c->self, len);
 		}
 	}
+	return (packet_length);
 }
 
 
@@ -2719,6 +2759,15 @@ channel_fwd_bind_addr(const char *listen_addr, int *wildcardp,
 	return addr;
 }
 
+
+void
+channel_set_hpn(int external_hpn_disabled, int external_hpn_buffer_size)
+{
+	hpn_disabled = external_hpn_disabled;
+	hpn_buffer_size = external_hpn_buffer_size;
+	debug("HPN Disabled: %d, HPN Buffer Size: %d", hpn_disabled, hpn_buffer_size);
+}
+
 static int
 channel_setup_fwd_listener(int type, const char *listen_addr,
     u_short listen_port, int *allocated_listen_port,
@@ -2845,9 +2894,15 @@ channel_setup_fwd_listener(int type, const char *listen_addr,
 		}
 
 		/* Allocate a channel number for the socket. */
+		/* explicitly test for hpn disabled option. if true use smaller window size */
+		if (hpn_disabled)
 		c = channel_new("port listener", type, sock, sock, -1,
 		    CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT,
 		    0, "port listener", 1);
+ 		else
+ 			c = channel_new("port listener", type, sock, sock, -1,
+ 			  hpn_buffer_size, CHAN_TCP_PACKET_DEFAULT,
+ 			  0, "port listener", 1);
 		c->path = xstrdup(host);
 		c->host_port = port_to_connect;
 		c->listening_addr = addr == NULL ? NULL : xstrdup(addr);
@@ -3503,10 +3558,17 @@ x11_create_display_inet(int x11_display_offset, int x11_use_localhost,
 	*chanids = xcalloc(num_socks + 1, sizeof(**chanids));
 	for (n = 0; n < num_socks; n++) {
 		sock = socks[n];
+		/* Is this really necassary? */
+		if (hpn_disabled)
 		nc = channel_new("x11 listener",
 		    SSH_CHANNEL_X11_LISTENER, sock, sock, -1,
 		    CHAN_X11_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT,
 		    0, "X11 inet listener", 1);
+		else
+			nc = channel_new("x11 listener",
+			    SSH_CHANNEL_X11_LISTENER, sock, sock, -1,
+			    hpn_buffer_size, CHAN_X11_PACKET_DEFAULT,
+			    0, "X11 inet listener", 1);
 		nc->single_connection = single_connection;
 		(*chanids)[n] = nc->self;
 	}
diff --git a/channels.h b/channels.h
index d75b800..0a95283 100644
--- a/channels.h
+++ b/channels.h
@@ -129,8 +129,10 @@ struct Channel {
 	u_int	local_window_max;
 	u_int	local_consumed;
 	u_int	local_maxpacket;
+	int	dynamic_window;
 	int     extended_usage;
 	int	single_connection;
+	u_int	tcpwinsz;
 
 	char   *ctype;		/* type */
 
@@ -165,9 +167,11 @@ struct Channel {
 
 /* default window/packet sizes for tcp/x11-fwd-channel */
 #define CHAN_SES_PACKET_DEFAULT	(32*1024)
-#define CHAN_SES_WINDOW_DEFAULT	(64*CHAN_SES_PACKET_DEFAULT)
+#define CHAN_SES_WINDOW_DEFAULT	(4*CHAN_SES_PACKET_DEFAULT)
+
 #define CHAN_TCP_PACKET_DEFAULT	(32*1024)
-#define CHAN_TCP_WINDOW_DEFAULT	(64*CHAN_TCP_PACKET_DEFAULT)
+#define CHAN_TCP_WINDOW_DEFAULT	(4*CHAN_TCP_PACKET_DEFAULT)
+
 #define CHAN_X11_PACKET_DEFAULT	(16*1024)
 #define CHAN_X11_WINDOW_DEFAULT	(4*CHAN_X11_PACKET_DEFAULT)
 
@@ -242,7 +246,7 @@ void	 channel_input_status_confirm(int, u_int32_t, void *);
 void	 channel_prepare_select(fd_set **, fd_set **, int *, u_int*,
 	     time_t*, int);
 void     channel_after_select(fd_set *, fd_set *);
-void     channel_output_poll(void);
+int      channel_output_poll(void);
 
 int      channel_not_very_much_buffered_data(void);
 void     channel_close_all(void);
@@ -303,4 +307,7 @@ void	 chan_rcvd_ieof(Channel *);
 void	 chan_write_failed(Channel *);
 void	 chan_obuf_empty(Channel *);
 
+/* hpn handler */
+void     channel_set_hpn(int, int);
+
 #endif
diff --git a/cipher.c b/cipher.c
index 9ca1d00..ad57555 100644
--- a/cipher.c
+++ b/cipher.c
@@ -180,7 +180,8 @@ ciphers_valid(const char *names)
 	for ((p = strsep(&cp, CIPHER_SEP)); p && *p != '\0';
 	    (p = strsep(&cp, CIPHER_SEP))) {
 		c = cipher_by_name(p);
-		if (c == NULL || c->number != SSH_CIPHER_SSH2) {
+		if (c == NULL || (c->number != SSH_CIPHER_SSH2 &&
+				   c->number != SSH_CIPHER_NONE)) {
 			debug("bad cipher %s [%s]", p, names);
 			xfree(cipher_list);
 			return 0;
@@ -406,6 +407,7 @@ cipher_get_keyiv(CipherContext *cc, u_char *iv, u_int len)
 	int evplen;
 
 	switch (c->number) {
+	case SSH_CIPHER_NONE:
 	case SSH_CIPHER_SSH2:
 	case SSH_CIPHER_DES:
 	case SSH_CIPHER_BLOWFISH:
@@ -442,6 +444,7 @@ cipher_set_keyiv(CipherContext *cc, u_char *iv)
 	int evplen = 0;
 
 	switch (c->number) {
+	case SSH_CIPHER_NONE:
 	case SSH_CIPHER_SSH2:
 	case SSH_CIPHER_DES:
 	case SSH_CIPHER_BLOWFISH:
diff --git a/clientloop.c b/clientloop.c
index c1d1d44..15cb3a0 100644
--- a/clientloop.c
+++ b/clientloop.c
@@ -1884,9 +1884,15 @@ client_request_x11(const char *request_type, int rchan)
 	sock = x11_connect_display();
 	if (sock < 0)
 		return NULL;
+	/* again is this really necessary for X11? */
+	if (options.hpn_disabled)
 	c = channel_new("x11",
 	    SSH_CHANNEL_X11_OPEN, sock, sock, -1,
 	    CHAN_TCP_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT, 0, "x11", 1);
+	else
+		c = channel_new("x11",
+		    SSH_CHANNEL_X11_OPEN, sock, sock, -1,
+		    options.hpn_buffer_size, CHAN_X11_PACKET_DEFAULT, 0, "x11", 1);
 	c->force_drain = 1;
 	return c;
 }
@@ -1906,9 +1912,15 @@ client_request_agent(const char *request_type, int rchan)
 	sock = ssh_get_authentication_socket();
 	if (sock < 0)
 		return NULL;
+	if (options.hpn_disabled)
+	c = channel_new("authentication agent connection",
+	    SSH_CHANNEL_OPEN, sock, sock, -1,
+		    CHAN_X11_WINDOW_DEFAULT, CHAN_TCP_WINDOW_DEFAULT, 0,
+		    "authentication agent connection", 1);
+	else
 	c = channel_new("authentication agent connection",
 	    SSH_CHANNEL_OPEN, sock, sock, -1,
-	    CHAN_X11_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0,
+	    options.hpn_buffer_size, options.hpn_buffer_size, 0,
 	    "authentication agent connection", 1);
 	c->force_drain = 1;
 	return c;
@@ -1936,10 +1948,18 @@ client_request_tun_fwd(int tun_mode, int local_tun, int remote_tun)
 		return -1;
 	}
 
+	if(options.hpn_disabled)
 	c = channel_new("tun", SSH_CHANNEL_OPENING, fd, fd, -1,
-	    CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
+				CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT,
+				0, "tun", 1);
+	else
+	c = channel_new("tun", SSH_CHANNEL_OPENING, fd, fd, -1,
+				options.hpn_buffer_size, CHAN_TCP_PACKET_DEFAULT,
+				0, "tun", 1);
 	c->datagram = 1;
 
+
+
 #if defined(SSH_TUN_FILTER)
 	if (options.tun_open == SSH_TUNMODE_POINTOPOINT)
 		channel_register_filter(c->self, sys_tun_infilter,
diff --git a/compat.c b/compat.c
index f680f4f..e9a567c 100644
--- a/compat.c
+++ b/compat.c
@@ -173,6 +173,15 @@ compat_datafellows(const char *version)
 		    strlen(check[i].pat), 0) == 1) {
 			debug("match: %s pat %s", version, check[i].pat);
 			datafellows = check[i].bugs;
+			/* Check to see if the remote side is OpenSSH and not HPN */
+			if(strstr(version,"OpenSSH") != NULL)
+			{
+				if (strstr(version,"hpn") == NULL)
+				{
+					datafellows |= SSH_BUG_LARGEWINDOW;
+					debug("Remote is NON-HPN aware");
+				}
+			}
 			return;
 		}
 	}
diff --git a/compat.h b/compat.h
index 3ae5d9c..6a7aeb2 100644
--- a/compat.h
+++ b/compat.h
@@ -59,6 +59,7 @@
 #define SSH_BUG_RFWD_ADDR	0x02000000
 #define SSH_NEW_OPENSSH		0x04000000
 #define SSH_BUG_DYNAMIC_RPORT	0x08000000
+#define SSH_BUG_LARGEWINDOW     0x10000000
 
 void     enable_compat13(void);
 void     enable_compat20(void);
diff --git a/kex.c b/kex.c
index 57a79dd..1edaecb 100644
--- a/kex.c
+++ b/kex.c
@@ -49,6 +49,7 @@
 #include "dispatch.h"
 #include "monitor.h"
 #include "roaming.h"
+#include "canohost.h"
 
 #if OPENSSL_VERSION_NUMBER >= 0x00907000L
 # if defined(HAVE_EVP_SHA256)
@@ -91,7 +92,8 @@ kex_names_valid(const char *names)
 }
 
 /* put algorithm proposal into buffer */
-static void
+/* used in sshconnect.c as well as kex.c */
+void
 kex_prop2buf(Buffer *b, char *proposal[PROPOSAL_MAX])
 {
 	u_int i;
@@ -418,6 +420,13 @@ kex_choose_conf(Kex *kex)
 	int nenc, nmac, ncomp;
 	u_int mode, ctos, need, authlen;
 	int first_kex_follows, type;
+	int log_flag = 0;
+
+	int auth_flag;
+
+	auth_flag = packet_authentication_state();
+
+	debug ("AUTH STATE IS %d", auth_flag);
 
 	my   = kex_buf2prop(&kex->my, NULL);
 	peer = kex_buf2prop(&kex->peer, &first_kex_follows);
@@ -455,11 +464,34 @@ kex_choose_conf(Kex *kex)
 		if (authlen == 0)
 			choose_mac(&newkeys->mac, cprop[nmac], sprop[nmac]);
 		choose_comp(&newkeys->comp, cprop[ncomp], sprop[ncomp]);
+		debug("REQUESTED ENC.NAME is '%s'", newkeys->enc.name);
+		if (strcmp(newkeys->enc.name, "none") == 0) {
+			debug("Requesting NONE. Authflag is %d", auth_flag);
+			if (auth_flag == 1) {
+				debug("None requested post authentication.");
+			} else {
+				fatal("Pre-authentication none cipher requests are not allowed.");
+			}
+		}
 		debug("kex: %s %s %s %s",
 		    ctos ? "client->server" : "server->client",
 		    newkeys->enc.name,
 		    authlen == 0 ? newkeys->mac.name : "<implicit>",
 		    newkeys->comp.name);
+		/* client starts withctos = 0 && log flag = 0 and no log*/
+		/* 2nd client pass ctos=1 and flag = 1 so no log*/
+		/* server starts with ctos =1 && log_flag = 0 so log */
+		/* 2nd sever pass ctos = 1 && log flag = 1 so no log*/
+		/* -cjr*/
+		if (ctos && !log_flag) {
+			logit("SSH: Server;Ltype: Kex;Remote: %s-%d;Enc: %s;MAC: %s;Comp: %s",
+			      get_remote_ipaddr(),
+			      get_remote_port(),
+			      newkeys->enc.name,
+			      newkeys->mac.name,
+			      newkeys->comp.name);
+		}
+		log_flag = 1;
 	}
 	choose_kex(kex, cprop[PROPOSAL_KEX_ALGS], sprop[PROPOSAL_KEX_ALGS]);
 	choose_hostkeyalg(kex, cprop[PROPOSAL_SERVER_HOST_KEY_ALGS],
diff --git a/kex.h b/kex.h
index 46731fa..fafe115 100644
--- a/kex.h
+++ b/kex.h
@@ -142,6 +142,8 @@ struct Kex {
 
 int	 kex_names_valid(const char *);
 
+void kex_prop2buf(Buffer *, char *proposal[PROPOSAL_MAX]);
+
 Kex	*kex_setup(char *[PROPOSAL_MAX]);
 void	 kex_finish(Kex *);
 
diff --git a/myproposal.h b/myproposal.h
index 99d0934..9358dc3 100644
--- a/myproposal.h
+++ b/myproposal.h
@@ -106,6 +106,8 @@
 #define	KEX_DEFAULT_COMP	"none,zlib@openssh.com,zlib"
 #define	KEX_DEFAULT_LANG	""
 
+#define KEX_ENCRYPT_INCLUDE_NONE KEX_DEFAULT_ENCRYPT \
+	",none"
 
 static char *myproposal[PROPOSAL_MAX] = {
 	KEX_DEFAULT_KEX,
diff --git a/packet.c b/packet.c
index 9326dde..dc9dd8d 100644
--- a/packet.c
+++ b/packet.c
@@ -841,7 +841,7 @@ packet_enable_delayed_compress(void)
 /*
  * Finalize packet in SSH2 format (compress, mac, encrypt, enqueue)
  */
-static void
+static int
 packet_send2_wrapped(void)
 {
 	u_char type, *cp, *macbuf = NULL;
@@ -972,11 +972,13 @@ packet_send2_wrapped(void)
 		set_newkeys(MODE_OUT);
 	else if (type == SSH2_MSG_USERAUTH_SUCCESS && active_state->server_side)
 		packet_enable_delayed_compress();
+	return len - 4;
 }
 
-static void
+static int
 packet_send2(void)
 {
+	int packet_length = 0;
 	struct packet *p;
 	u_char type, *cp;
 
@@ -996,7 +998,7 @@ packet_send2(void)
 			    sizeof(Buffer));
 			buffer_init(&active_state->outgoing_packet);
 			TAILQ_INSERT_TAIL(&active_state->outgoing, p, next);
-			return;
+			return(sizeof(Buffer));
 		}
 	}
 
@@ -1004,7 +1006,7 @@ packet_send2(void)
 	if (type == SSH2_MSG_KEXINIT)
 		active_state->rekeying = 1;
 
-	packet_send2_wrapped();
+	packet_length = packet_send2_wrapped();
 
 	/* after a NEWKEYS message we can send the complete queue */
 	if (type == SSH2_MSG_NEWKEYS) {
@@ -1017,19 +1019,22 @@ packet_send2(void)
 			    sizeof(Buffer));
 			TAILQ_REMOVE(&active_state->outgoing, p, next);
 			xfree(p);
-			packet_send2_wrapped();
+			packet_length += packet_send2_wrapped();
 		}
 	}
+	return(packet_length);
 }
 
-void
+int
 packet_send(void)
 {
+	int packet_len = 0;
 	if (compat20)
-		packet_send2();
+		packet_len = packet_send2();
 	else
 		packet_send1();
 	DBG(debug("packet_send done"));
+	return(packet_len);
 }
 
 /*
@@ -1697,7 +1702,7 @@ packet_disconnect(const char *fmt,...)
 
 /* Checks if there is any buffered output, and tries to write some of the output. */
 
-void
+int
 packet_write_poll(void)
 {
 	int len = buffer_len(&active_state->output);
@@ -1710,13 +1715,14 @@ packet_write_poll(void)
 		if (len == -1) {
 			if (errno == EINTR || errno == EAGAIN ||
 			    errno == EWOULDBLOCK)
-				return;
+				return(0);
 			fatal("Write failed: %.100s", strerror(errno));
 		}
 		if (len == 0 && !cont)
 			fatal("Write connection closed");
 		buffer_consume(&active_state->output, len);
 	}
+	return(len);
 }
 
 /*
@@ -1917,12 +1923,24 @@ packet_send_ignore(int nbytes)
 	}
 }
 
+int rekey_requested = 0;
+void
+packet_request_rekeying(void)
+{
+	rekey_requested = 1;
+}
+
 #define MAX_PACKETS	(1U<<31)
 int
 packet_need_rekeying(void)
 {
 	if (datafellows & SSH_BUG_NOREKEY)
 		return 0;
+	if (rekey_requested == 1)
+	{
+		rekey_requested = 0;
+		return 1;
+	}
 	return
 	    (active_state->p_send.packets > MAX_PACKETS) ||
 	    (active_state->p_read.packets > MAX_PACKETS) ||
@@ -2014,3 +2032,9 @@ packet_restore_state(void)
 		add_recv_bytes(len);
 	}
 }
+
+int
+packet_authentication_state(void)
+{
+	return(active_state->after_authentication);
+}
diff --git a/packet.h b/packet.h
index 09ba079..d3833dd 100644
--- a/packet.h
+++ b/packet.h
@@ -23,6 +23,9 @@
 #include <openssl/ec.h>
 #endif
 
+void
+packet_request_rekeying(void);
+
 void     packet_set_connection(int, int);
 void     packet_set_timeout(int, int);
 void     packet_set_nonblocking(void);
@@ -38,6 +41,7 @@ void     packet_set_interactive(int, int, int);
 int      packet_is_interactive(void);
 void     packet_set_server(void);
 void     packet_set_authenticated(void);
+int	 packet_authentication_state(void);
 
 void     packet_start(u_char);
 void     packet_put_char(int ch);
@@ -51,7 +55,7 @@ void     packet_put_ecpoint(const EC_GROUP *, const EC_POINT *);
 void     packet_put_string(const void *buf, u_int len);
 void     packet_put_cstring(const char *str);
 void     packet_put_raw(const void *buf, u_int len);
-void     packet_send(void);
+int      packet_send(void);
 
 int      packet_read(void);
 void     packet_read_expect(int type);
@@ -85,7 +89,7 @@ int	 packet_get_ssh1_cipher(void);
 void	 packet_set_iv(int, u_char *);
 void	*packet_get_newkeys(int);
 
-void     packet_write_poll(void);
+int      packet_write_poll(void);
 void     packet_write_wait(void);
 int      packet_have_data_to_write(void);
 int      packet_not_very_much_data_to_write(void);
diff --git a/readconf.c b/readconf.c
index 097bb05..b9b2fd6 100644
--- a/readconf.c
+++ b/readconf.c
@@ -135,6 +135,8 @@ typedef enum {
 	oTunnel, oTunnelDevice, oLocalCommand, oPermitLocalCommand,
 	oVisualHostKey, oUseRoaming, oZeroKnowledgePasswordAuthentication,
 	oKexAlgorithms, oIPQoS, oRequestTTY,
+	oNoneEnabled, oTcpRcvBufPoll, oTcpRcvBuf, oNoneSwitch, oHPNDisabled,
+	oHPNBufferSize,
 	oDeprecated, oUnsupported
 } OpCodes;
 
@@ -247,6 +249,13 @@ static struct {
 	{ "ipqos", oIPQoS },
 	{ "requesttty", oRequestTTY },
 
+	{ "noneenabled", oNoneEnabled },
+	{ "tcprcvbufpoll", oTcpRcvBufPoll },
+	{ "tcprcvbuf", oTcpRcvBuf },
+	{ "noneswitch", oNoneSwitch },
+	{ "hpndisabled", oHPNDisabled },
+	{ "hpnbuffersize", oHPNBufferSize },
+
 	{ NULL, oBadOption }
 };
 
@@ -495,6 +504,36 @@ parse_flag:
 		intptr = &options->check_host_ip;
 		goto parse_flag;
 
+	case oNoneEnabled:
+		intptr = &options->none_enabled;
+		goto parse_flag;
+ 
+	/* we check to see if the command comes from the */
+	/* command line or not. If it does then enable it */
+	/* otherwise fail. NONE should never be a default configuration */
+	case oNoneSwitch:
+		if(strcmp(filename,"command-line") == 0) {
+			intptr = &options->none_switch;
+			goto parse_flag;
+		} else {
+			error("NoneSwitch is found in %.200s.\nYou may only use this configuration option from the command line", filename);
+			error("Continuing...");
+			debug("NoneSwitch directive found in %.200s.", filename);
+			return 0;
+		}
+
+	case oHPNDisabled:
+		intptr = &options->hpn_disabled;
+		goto parse_flag;
+
+	case oHPNBufferSize:
+		intptr = &options->hpn_buffer_size;
+		goto parse_int;
+
+	case oTcpRcvBufPoll:
+		intptr = &options->tcp_rcv_buf_poll;
+		goto parse_flag;
+
 	case oVerifyHostKeyDNS:
 		intptr = &options->verify_host_key_dns;
 		goto parse_yesnoask;
@@ -680,6 +719,10 @@ parse_int:
 		intptr = &options->connection_attempts;
 		goto parse_int;
 
+	case oTcpRcvBuf:
+		intptr = &options->tcp_rcv_buf;
+		goto parse_int;
+
 	case oCipher:
 		intptr = &options->cipher;
 		arg = strdelim(&s);
@@ -1203,6 +1246,13 @@ initialize_options(Options * options)
 	options->ip_qos_interactive = -1;
 	options->ip_qos_bulk = -1;
 	options->request_tty = -1;
+
+	options->none_switch = -1;
+	options->none_enabled = -1;
+	options->hpn_disabled = -1;
+	options->hpn_buffer_size = -1;
+	options->tcp_rcv_buf_poll = -1;
+	options->tcp_rcv_buf = -1;
 }
 
 /*
@@ -1339,6 +1389,29 @@ fill_default_options(Options * options)
 		options->server_alive_interval = 0;
 	if (options->server_alive_count_max == -1)
 		options->server_alive_count_max = 3;
+	if (options->none_switch == -1)
+	        options->none_switch = 0;
+	if (options->hpn_disabled == -1)
+	        options->hpn_disabled = 0;
+	if (options->hpn_buffer_size > -1)
+	{
+	  /* if a user tries to set the size to 0 set it to 1KB */
+		if (options->hpn_buffer_size == 0)
+		options->hpn_buffer_size = 1024;
+		/*limit the buffer to 64MB*/
+		if (options->hpn_buffer_size > 65536)
+		{
+			options->hpn_buffer_size = 65536*1024;
+			debug("User requested buffer larger than 64MB. Request reverted to 64MB");
+		}
+		debug("hpn_buffer_size set to %d", options->hpn_buffer_size);
+	}
+	if (options->tcp_rcv_buf == 0)
+		options->tcp_rcv_buf = 1;
+	if (options->tcp_rcv_buf > -1)
+		options->tcp_rcv_buf *=1024;
+	if (options->tcp_rcv_buf_poll == -1)
+		options->tcp_rcv_buf_poll = 1;
 	if (options->control_master == -1)
 		options->control_master = 0;
 	if (options->control_persist == -1) {
diff --git a/readconf.h b/readconf.h
index be30ee0..6480539 100644
--- a/readconf.h
+++ b/readconf.h
@@ -61,6 +61,10 @@ typedef struct {
 	int     compression_level;	/* Compression level 1 (fast) to 9
 					 * (best). */
 	int     tcp_keep_alive;	/* Set SO_KEEPALIVE. */
+	int     tcp_rcv_buf; /* user switch to set tcp recv buffer */
+	int     tcp_rcv_buf_poll; /* Option to poll recv buf every window transfer */
+	int     hpn_disabled;    /* Switch to disable HPN buffer management */
+	int     hpn_buffer_size; /* User definable size for HPN buffer window */
 	int	ip_qos_interactive;	/* IP ToS/DSCP/class for interactive */
 	int	ip_qos_bulk;		/* IP ToS/DSCP/class for bulk traffic */
 	LogLevel log_level;	/* Level for logging. */
@@ -109,6 +113,8 @@ typedef struct {
 
 	int	enable_ssh_keysign;
 	int64_t rekey_limit;
+	int     none_switch;    /* Use none cipher */
+	int     none_enabled;   /* Allow none to be used */
 	int	no_host_authentication_for_localhost;
 	int	identities_only;
 	int	server_alive_interval;
diff --git a/scp.c b/scp.c
index 645d740..0cd0666 100644
--- a/scp.c
+++ b/scp.c
@@ -731,7 +731,7 @@ source(int argc, char **argv)
 	off_t i, statbytes;
 	size_t amt;
 	int fd = -1, haderr, indx;
-	char *last, *name, buf[2048], encname[MAXPATHLEN];
+	char *last, *name, buf[16384], encname[MAXPATHLEN];
 	int len;
 
 	for (indx = 0; indx < argc; ++indx) {
@@ -913,7 +913,7 @@ sink(int argc, char **argv)
 	mode_t mode, omode, mask;
 	off_t size, statbytes;
 	int setimes, targisdir, wrerrno = 0;
-	char ch, *cp, *np, *targ, *why, *vect[1], buf[2048];
+	char ch, *cp, *np, *targ, *why, *vect[1], buf[16384];
 	struct timeval tv[2];
 
 #define	atime	tv[0]
diff --git a/servconf.c b/servconf.c
index b2a60fd..0f150c5 100644
--- a/servconf.c
+++ b/servconf.c
@@ -143,6 +143,10 @@ initialize_server_options(ServerOptions *options)
 	options->revoked_keys_file = NULL;
 	options->trusted_user_ca_keys = NULL;
 	options->authorized_principals_file = NULL;
+	options->none_enabled = -1;
+	options->tcp_rcv_buf_poll = -1;
+	options->hpn_disabled = -1;
+	options->hpn_buffer_size = -1;
 	options->ip_qos_interactive = -1;
 	options->ip_qos_bulk = -1;
 	options->version_addendum = NULL;
@@ -151,6 +155,11 @@ initialize_server_options(ServerOptions *options)
 void
 fill_default_server_options(ServerOptions *options)
 {
+	/* needed for hpn socket tests */
+	int sock;
+	int socksize;
+	int socksizelen = sizeof(int);
+
 	/* Portable-specific options */
 	if (options->use_pam == -1)
 		options->use_pam = 0;
@@ -291,6 +300,40 @@ fill_default_server_options(ServerOptions *options)
 	if (use_privsep == -1)
 		use_privsep = PRIVSEP_NOSANDBOX;
 
+	if (options->hpn_disabled == -1)
+		options->hpn_disabled = 0;
+	if (options->hpn_buffer_size == -1) {
+		/* option not explicitly set. Now we have to figure out */
+		/* what value to use */
+		if (options->hpn_disabled == 1) {
+			options->hpn_buffer_size = CHAN_SES_WINDOW_DEFAULT;
+		} else {
+			/* get the current RCV size and set it to that */
+			/*create a socket but don't connect it */
+			/* we use that the get the rcv socket size */
+			sock = socket(AF_INET, SOCK_STREAM, 0);
+			getsockopt(sock, SOL_SOCKET, SO_RCVBUF,
+				   &socksize, &socksizelen);
+			close(sock);
+			options->hpn_buffer_size = socksize;
+			debug ("HPN Buffer Size: %d", options->hpn_buffer_size);
+		}
+	} else {
+		/* we have to do this incase the user sets both values in a contradictory */
+		/* manner. hpn_disabled overrrides hpn_buffer_size*/
+		if (options->hpn_disabled <= 0) {
+			if (options->hpn_buffer_size == 0)
+				options->hpn_buffer_size = 1;
+			/* limit the maximum buffer to 64MB */
+			if (options->hpn_buffer_size > 64*1024) {
+				options->hpn_buffer_size = 64*1024*1024;
+			} else {
+				options->hpn_buffer_size *= 1024;
+			}
+		} else
+			options->hpn_buffer_size = CHAN_TCP_WINDOW_DEFAULT;
+	}
+
 #ifndef HAVE_MMAP
 	if (use_privsep && options->compression == 1) {
 		error("This platform does not support both privilege "
@@ -332,6 +375,7 @@ typedef enum {
 	sUsePrivilegeSeparation, sAllowAgentForwarding,
 	sZeroKnowledgePasswordAuthentication, sHostCertificate,
 	sRevokedKeys, sTrustedUserCAKeys, sAuthorizedPrincipalsFile,
+	sNoneEnabled, sTcpRcvBufPoll, sHPNDisabled, sHPNBufferSize,
 	sKexAlgorithms, sIPQoS, sVersionAddendum,
 	sAuthorizedKeysCommand, sAuthorizedKeysCommandUser,
 	sAuthenticationMethods,
@@ -457,6 +501,10 @@ static struct {
 	{ "revokedkeys", sRevokedKeys, SSHCFG_ALL },
 	{ "trustedusercakeys", sTrustedUserCAKeys, SSHCFG_ALL },
 	{ "authorizedprincipalsfile", sAuthorizedPrincipalsFile, SSHCFG_ALL },
+	{ "noneenabled", sNoneEnabled, SSHCFG_ALL },
+	{ "hpndisabled", sHPNDisabled, SSHCFG_ALL },
+	{ "hpnbuffersize", sHPNBufferSize, SSHCFG_ALL },
+	{ "tcprcvbufpoll", sTcpRcvBufPoll, SSHCFG_ALL },
 	{ "kexalgorithms", sKexAlgorithms, SSHCFG_GLOBAL },
 	{ "ipqos", sIPQoS, SSHCFG_ALL },
 	{ "authorizedkeyscommand", sAuthorizedKeysCommand, SSHCFG_ALL },
@@ -489,6 +537,7 @@ parse_token(const char *cp, const char *filename,
 
 	for (i = 0; keywords[i].name; i++)
 		if (strcasecmp(cp, keywords[i].name) == 0) {
+		        debug ("Config token is %s", keywords[i].name);
 			*flags = keywords[i].flags;
 			return keywords[i].opcode;
 		}
@@ -1005,6 +1054,22 @@ process_server_config_line(ServerOptions *options, char *line,
 			*intptr = value;
 		break;
 
+	case sNoneEnabled:
+		intptr = &options->none_enabled;
+		goto parse_flag;
+
+	case sTcpRcvBufPoll:
+		intptr = &options->tcp_rcv_buf_poll;
+		goto parse_flag;
+
+	case sHPNDisabled:
+		intptr = &options->hpn_disabled;
+		goto parse_flag;
+
+	case sHPNBufferSize:
+		intptr = &options->hpn_buffer_size;
+		goto parse_int;
+
 	case sIgnoreUserKnownHosts:
 		intptr = &options->ignore_user_known_hosts;
 		goto parse_flag;
diff --git a/servconf.h b/servconf.h
index 870c709..f042fe4 100644
--- a/servconf.h
+++ b/servconf.h
@@ -164,6 +164,10 @@ typedef struct {
 	char   *adm_forced_command;
 
 	int	use_pam;		/* Enable auth via PAM */
+        int     none_enabled;           /* enable NONE cipher switch */
+        int     tcp_rcv_buf_poll;       /* poll tcp rcv window in autotuning kernels*/
+	int	hpn_disabled;		/* disable hpn functionality. false by default */
+	int	hpn_buffer_size;	/* set the hpn buffer size - default 3MB */
 
 	int	permit_tun;
 
diff --git a/serverloop.c b/serverloop.c
index e224bd0..4d642d5 100644
--- a/serverloop.c
+++ b/serverloop.c
@@ -94,10 +94,10 @@ static int fdin;		/* Descriptor for stdin (for writing) */
 static int fdout;		/* Descriptor for stdout (for reading);
 				   May be same number as fdin. */
 static int fderr;		/* Descriptor for stderr.  May be -1. */
-static long stdin_bytes = 0;	/* Number of bytes written to stdin. */
-static long stdout_bytes = 0;	/* Number of stdout bytes sent to client. */
-static long stderr_bytes = 0;	/* Number of stderr bytes sent to client. */
-static long fdout_bytes = 0;	/* Number of stdout bytes read from program. */
+static u_long stdin_bytes = 0;	/* Number of bytes written to stdin. */
+static u_long stdout_bytes = 0;	/* Number of stdout bytes sent to client. */
+static u_long stderr_bytes = 0;	/* Number of stderr bytes sent to client. */
+static u_long fdout_bytes = 0;	/* Number of stdout bytes read from program. */
 static int stdin_eof = 0;	/* EOF message received from client. */
 static int fdout_eof = 0;	/* EOF encountered reading from fdout. */
 static int fderr_eof = 0;	/* EOF encountered readung from fderr. */
@@ -122,6 +122,20 @@ static volatile sig_atomic_t received_sigterm = 0;
 static void server_init_dispatch(void);
 
 /*
+ * Returns current time in seconds from Jan 1, 1970 with the maximum
+ * available resolution.
+ */
+
+static double
+get_current_time(void)
+{
+	struct timeval tv;
+	gettimeofday(&tv, NULL);
+	return (double) tv.tv_sec + (double) tv.tv_usec / 1000000.0;
+}
+
+
+/*
  * we write to this pipe if a SIGCHLD is caught in order to avoid
  * the race between select() and child_terminated
  */
@@ -420,6 +434,7 @@ process_input(fd_set *readset)
 		} else {
 			/* Buffer any received data. */
 			packet_process_incoming(buf, len);
+			fdout_bytes += len;
 		}
 	}
 	if (compat20)
@@ -442,6 +457,7 @@ process_input(fd_set *readset)
 		} else {
 			buffer_append(&stdout_buffer, buf, len);
 			fdout_bytes += len;
+			debug ("FD out now: %ld", fdout_bytes);
 		}
 	}
 	/* Read and buffer any available stderr data from the program. */
@@ -509,7 +525,7 @@ process_output(fd_set *writeset)
 	}
 	/* Send any buffered packet data to the client. */
 	if (FD_ISSET(connection_out, writeset))
-		packet_write_poll();
+		stdin_bytes += packet_write_poll();
 }
 
 /*
@@ -826,8 +842,10 @@ server_loop2(Authctxt *authctxt)
 {
 	fd_set *readset = NULL, *writeset = NULL;
 	int rekeying = 0, max_fd, nalloc = 0;
+	double start_time, total_time;
 
 	debug("Entering interactive session for SSH2.");
+	start_time = get_current_time();
 
 	mysignal(SIGCHLD, sigchld_handler);
 	child_terminated = 0;
@@ -889,6 +907,11 @@ server_loop2(Authctxt *authctxt)
 
 	/* free remaining sessions, e.g. remove wtmp entries */
 	session_destroy_all(NULL);
+	total_time = get_current_time() - start_time;
+	logit("SSH: Server;LType: Throughput;Remote: %s-%d;IN: %lu;OUT: %lu;Duration: %.1f;tPut_in: %.1f;tPut_out: %.1f",
+	      get_remote_ipaddr(), get_remote_port(),
+	      stdin_bytes, fdout_bytes, total_time, stdin_bytes / total_time, 
+	      fdout_bytes / total_time);
 }
 
 static void
@@ -1011,8 +1034,12 @@ server_request_tun(void)
 	sock = tun_open(tun, mode);
 	if (sock < 0)
 		goto done;
+	if (options.hpn_disabled)
 	c = channel_new("tun", SSH_CHANNEL_OPEN, sock, sock, -1,
 	    CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
+	else
+		c = channel_new("tun", SSH_CHANNEL_OPEN, sock, sock, -1,
+		    options.hpn_buffer_size, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
 	c->datagram = 1;
 #if defined(SSH_TUN_FILTER)
 	if (mode == SSH_TUNMODE_POINTOPOINT)
@@ -1048,6 +1075,8 @@ server_request_session(void)
 	c = channel_new("session", SSH_CHANNEL_LARVAL,
 	    -1, -1, -1, /*window size*/0, CHAN_SES_PACKET_DEFAULT,
 	    0, "server-session", 1);
+	if ((options.tcp_rcv_buf_poll) && (!options.hpn_disabled))
+		c->dynamic_window = 1;
 	if (session_open(the_authctxt, c->self) != 1) {
 		debug("session open failed, free channel %d", c->self);
 		channel_free(c);
diff --git a/session.c b/session.c
index 19eaa20..57ebeca 100644
--- a/session.c
+++ b/session.c
@@ -236,6 +236,7 @@ auth_input_request_forwarding(struct passwd * pw)
 	}
 
 	/* Allocate a channel for the authentication agent socket. */
+	/* this shouldn't matter if its hpn or not - cjr */
 	nc = channel_new("auth socket",
 	    SSH_CHANNEL_AUTH_SOCKET, sock, sock, -1,
 	    CHAN_X11_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT,
@@ -2286,10 +2287,16 @@ session_set_fds(Session *s, int fdin, int fdout, int fderr, int ignore_fderr,
 	 */
 	if (s->chanid == -1)
 		fatal("no channel for session %d", s->self);
+	if (options.hpn_disabled)
 	channel_set_fds(s->chanid,
 	    fdout, fdin, fderr,
 	    ignore_fderr ? CHAN_EXTENDED_IGNORE : CHAN_EXTENDED_READ,
 	    1, is_tty, CHAN_SES_WINDOW_DEFAULT);
+	else
+		channel_set_fds(s->chanid,
+		    fdout, fdin, fderr,
+		    ignore_fderr ? CHAN_EXTENDED_IGNORE : CHAN_EXTENDED_READ,
+		    1, is_tty, options.hpn_buffer_size);
 }
 
 /*
diff --git a/sftp.1 b/sftp.1
index bcb4721..284d618 100644
--- a/sftp.1
+++ b/sftp.1
@@ -247,7 +247,8 @@ diagnostic messages from
 Specify how many requests may be outstanding at any one time.
 Increasing this may slightly improve file transfer speed
 but will increase memory usage.
-The default is 64 outstanding requests.
+The default is 256 outstanding requests providing for 8MB
+of outstanding data with a 32KB buffer.
 .It Fl r
 Recursively copy entire directories when uploading and downloading.
 Note that
diff --git a/sftp.c b/sftp.c
index 342ae7e..65dacd9 100644
--- a/sftp.c
+++ b/sftp.c
@@ -65,7 +65,7 @@ typedef void EditLine;
 #include "sftp-client.h"
 
 #define DEFAULT_COPY_BUFLEN	32768	/* Size of buffer for up/download */
-#define DEFAULT_NUM_REQUESTS	64	/* # concurrent outstanding requests */
+#define DEFAULT_NUM_REQUESTS	256	/* # concurrent outstanding requests */
 
 /* File to read commands from */
 FILE* infile;
diff --git a/ssh.c b/ssh.c
index 3f61eb0..62f56de 100644
--- a/ssh.c
+++ b/ssh.c
@@ -579,6 +579,10 @@ main(int ac, char **av)
 			break;
 		case 'T':
 			options.request_tty = REQUEST_TTY_NO;
+			/* ensure that the user doesn't try to backdoor a */
+			/* null cipher switch on an interactive session */
+			/* so explicitly disable it no matter what */
+			options.none_switch=0;
 			break;
 		case 'o':
 			dummy = 1;
@@ -1372,6 +1376,9 @@ ssh_session2_open(void)
 {
 	Channel *c;
 	int window, packetmax, in, out, err;
+	int sock;
+	int socksize;
+	int socksizelen = sizeof(int);
 
 	if (stdin_null_flag) {
 		in = open(_PATH_DEVNULL, O_RDONLY);
@@ -1392,9 +1399,74 @@ ssh_session2_open(void)
 	if (!isatty(err))
 		set_nonblock(err);
 
-	window = CHAN_SES_WINDOW_DEFAULT;
+	/* we need to check to see if what they want to do about buffer */
+	/* sizes here. In a hpn to nonhpn connection we want to limit */
+	/* the window size to something reasonable in case the far side */
+	/* has the large window bug. In hpn to hpn connection we want to */
+	/* use the max window size but allow the user to override it */
+	/* lastly if they disabled hpn then use the ssh std window size */
+
+	/* so why don't we just do a getsockopt() here and set the */
+	/* ssh window to that? In the case of a autotuning receive */
+	/* window the window would get stuck at the initial buffer */
+	/* size generally less than 96k. Therefore we need to set the */
+	/* maximum ssh window size to the maximum hpn buffer size */
+	/* unless the user has specifically set the tcprcvbufpoll */
+	/* to no. In which case we *can* just set the window to the */
+	/* minimum of the hpn buffer size and tcp receive buffer size */
+
+	if (tty_flag)
+		options.hpn_buffer_size = CHAN_SES_WINDOW_DEFAULT;
+	else
+		options.hpn_buffer_size = 2*1024*1024;
+
+	if (datafellows & SSH_BUG_LARGEWINDOW)
+	{
+		debug("HPN to Non-HPN Connection");
+	}
+	else
+	{
+		if (options.tcp_rcv_buf_poll <= 0)
+		{
+			sock = socket(AF_INET, SOCK_STREAM, 0);
+			getsockopt(sock, SOL_SOCKET, SO_RCVBUF,
+				   &socksize, &socksizelen);
+			close(sock);
+			debug("socksize %d", socksize);
+			options.hpn_buffer_size = socksize;
+			debug ("HPNBufferSize set to TCP RWIN: %d", options.hpn_buffer_size);
+		}
+		else
+		{
+			if (options.tcp_rcv_buf > 0)
+			{
+				/*create a socket but don't connect it */
+				/* we use that the get the rcv socket size */
+				sock = socket(AF_INET, SOCK_STREAM, 0);
+				/* if they are using the tcp_rcv_buf option */
+				/* attempt to set the buffer size to that */
+				if (options.tcp_rcv_buf)
+					setsockopt(sock, SOL_SOCKET, SO_RCVBUF, (void *)&options.tcp_rcv_buf,
+						   sizeof(options.tcp_rcv_buf));
+				getsockopt(sock, SOL_SOCKET, SO_RCVBUF,
+					   &socksize, &socksizelen);
+				close(sock);
+				debug("socksize %d", socksize);
+				options.hpn_buffer_size = socksize;
+				debug ("HPNBufferSize set to user TCPRcvBuf: %d", options.hpn_buffer_size);
+			}
+ 		}
+	}
+
+	debug("Final hpn_buffer_size = %d", options.hpn_buffer_size);
+
+	window = options.hpn_buffer_size;
+
+	channel_set_hpn(options.hpn_disabled, options.hpn_buffer_size);
+
 	packetmax = CHAN_SES_PACKET_DEFAULT;
 	if (tty_flag) {
+		window = 4*CHAN_SES_PACKET_DEFAULT;
 		window >>= 1;
 		packetmax >>= 1;
 	}
@@ -1403,6 +1475,10 @@ ssh_session2_open(void)
 	    window, packetmax, CHAN_EXTENDED_WRITE,
 	    "client-session", /*nonblock*/0);
 
+	if ((options.tcp_rcv_buf_poll > 0) && (!options.hpn_disabled)) {
+		c->dynamic_window = 1;
+		debug ("Enabled Dynamic Window Scaling");
+	}
 	debug3("ssh_session2_open: channel_new: %d", c->self);
 
 	channel_send_open(c->self);
diff --git a/sshconnect.c b/sshconnect.c
index 07800a6..6b2b3c0 100644
--- a/sshconnect.c
+++ b/sshconnect.c
@@ -182,6 +182,31 @@ ssh_kill_proxy_command(void)
 }
 
 /*
+ * Set TCP receive buffer if requested.
+ * Note: tuning needs to happen after the socket is
+ * created but before the connection happens
+ * so winscale is negotiated properly -cjr
+ */
+static void
+ssh_set_socket_recvbuf(int sock)
+{
+	void *buf = (void *)&options.tcp_rcv_buf;
+	int sz = sizeof(options.tcp_rcv_buf);
+	int socksize;
+	int socksizelen = sizeof(int);
+
+	debug("setsockopt Attempting to set SO_RCVBUF to %d", options.tcp_rcv_buf);
+	if (setsockopt(sock, SOL_SOCKET, SO_RCVBUF, buf, sz) >= 0) {
+	  getsockopt(sock, SOL_SOCKET, SO_RCVBUF, &socksize, &socksizelen);
+	  debug("setsockopt SO_RCVBUF: %.100s %d", strerror(errno), socksize);
+	}
+	else
+		error("Couldn't set socket receive buffer to %d: %.100s",
+		    options.tcp_rcv_buf, strerror(errno));
+}
+
+
+/*
  * Creates a (possibly privileged) socket for use as the ssh connection.
  */
 static int
@@ -204,6 +229,8 @@ ssh_create_socket(int privileged, struct addrinfo *ai)
 			    strerror(errno));
 		else
 			debug("Allocated local port %d.", p);
+		if (options.tcp_rcv_buf > 0)
+			ssh_set_socket_recvbuf(sock);
 		return sock;
 	}
 	sock = socket(ai->ai_family, ai->ai_socktype, ai->ai_protocol);
@@ -213,6 +240,9 @@ ssh_create_socket(int privileged, struct addrinfo *ai)
 	}
 	fcntl(sock, F_SETFD, FD_CLOEXEC);
 
+	if (options.tcp_rcv_buf > 0)
+		ssh_set_socket_recvbuf(sock);
+
 	/* Bind the socket to an alternative local IP address */
 	if (options.bind_address == NULL)
 		return sock;
@@ -435,10 +465,10 @@ send_client_banner(int connection_out, int minor1)
 	/* Send our own protocol version identification. */
 	if (compat20) {
 		xasprintf(&client_version_string, "SSH-%d.%d-%.100s\r\n",
-		    PROTOCOL_MAJOR_2, PROTOCOL_MINOR_2, SSH_VERSION);
+		    PROTOCOL_MAJOR_2, PROTOCOL_MINOR_2, SSH_RELEASE);
 	} else {
 		xasprintf(&client_version_string, "SSH-%d.%d-%.100s\n",
-		    PROTOCOL_MAJOR_1, minor1, SSH_VERSION);
+		    PROTOCOL_MAJOR_1, minor1, SSH_RELEASE);
 	}
 	if (roaming_atomicio(vwrite, connection_out, client_version_string,
 	    strlen(client_version_string)) != strlen(client_version_string))
diff --git a/sshconnect2.c b/sshconnect2.c
index d6af0b9..9b0aea2 100644
--- a/sshconnect2.c
+++ b/sshconnect2.c
@@ -81,6 +81,12 @@
 extern char *client_version_string;
 extern char *server_version_string;
 extern Options options;
+extern Kex *xxx_kex;
+
+/* tty_flag is set in ssh.c. use this in ssh_userauth2 */
+/* if it is set then prevent the switch to the null cipher */
+
+extern int tty_flag;
 
 /*
  * SSH2 key exchange
@@ -421,6 +427,28 @@ ssh_userauth2(const char *local_user, const char *server_user, char *host,
 	pubkey_cleanup(&authctxt);
 	dispatch_range(SSH2_MSG_USERAUTH_MIN, SSH2_MSG_USERAUTH_MAX, NULL);
 
+	/* if the user wants to use the none cipher do it */
+	/* post authentication and only if the right conditions are met */
+	/* both of the NONE commands must be true and there must be no */
+	/* tty allocated */
+	if ((options.none_switch == 1) && (options.none_enabled == 1))
+	{
+		if (!tty_flag) /* no null on tty sessions */
+		{
+			debug("Requesting none rekeying...");
+			myproposal[PROPOSAL_ENC_ALGS_STOC] = "none";
+			myproposal[PROPOSAL_ENC_ALGS_CTOS] = "none";
+			kex_prop2buf(&xxx_kex->my,myproposal);
+			packet_request_rekeying();
+			fprintf(stderr, "WARNING: ENABLED NONE CIPHER\n");
+		}
+		else
+		{
+			/* requested NONE cipher when in a tty */
+			debug("Cannot switch to NONE cipher with tty allocated");
+			fprintf(stderr, "NONE cipher switch disabled when a TTY is allocated\n");
+		}
+	}
 	debug("Authentication succeeded (%s).", authctxt.method->name);
 }
 
diff --git a/sshd.c b/sshd.c
index 3e9d176..b05b2df 100644
--- a/sshd.c
+++ b/sshd.c
@@ -138,6 +138,9 @@ int deny_severity;
 #define REEXEC_CONFIG_PASS_FD		(STDERR_FILENO + 3)
 #define REEXEC_MIN_FREE_FD		(STDERR_FILENO + 4)
 
+int myflag = 0;
+
+
 extern char *__progname;
 
 /* Server configuration options. */
@@ -430,7 +433,7 @@ sshd_exchange_identification(int sock_in, int sock_out)
 	}
 
 	xasprintf(&server_version_string, "SSH-%d.%d-%.100s%s%s%s",
-	    major, minor, SSH_VERSION,
+	    major, minor, SSH_RELEASE,
 	    *options.version_addendum == '\0' ? "" : " ",
 	    options.version_addendum, newline);
 
@@ -482,6 +485,9 @@ sshd_exchange_identification(int sock_in, int sock_out)
 	}
 	debug("Client protocol version %d.%d; client software version %.100s",
 	    remote_major, remote_minor, remote_version);
+	logit("SSH: Server;Ltype: Version;Remote: %s-%d;Protocol: %d.%d;Client: %.100s",
+	      get_remote_ipaddr(), get_remote_port(),
+	    remote_major, remote_minor, remote_version);
 
 	compat_datafellows(remote_version);
 
@@ -1038,6 +1044,8 @@ server_listen(void)
 	int ret, listen_sock, on = 1;
 	struct addrinfo *ai;
 	char ntop[NI_MAXHOST], strport[NI_MAXSERV];
+	int socksize;
+	int socksizelen = sizeof(int);
 
 	for (ai = options.listen_addrs; ai; ai = ai->ai_next) {
 		if (ai->ai_family != AF_INET && ai->ai_family != AF_INET6)
@@ -1078,6 +1086,11 @@ server_listen(void)
 
 		debug("Bind to port %s on %s.", strport, ntop);
 
+		getsockopt(listen_sock, SOL_SOCKET, SO_RCVBUF,
+				   &socksize, &socksizelen);
+		debug("Server TCP RWIN socket size: %d", socksize);
+		debug("HPN Buffer Size: %d", options.hpn_buffer_size);
+
 		/* Bind the socket to the desired port. */
 		if (bind(listen_sock, ai->ai_addr, ai->ai_addrlen) < 0) {
 			error("Bind to port %s on %s failed: %.200s.",
@@ -1976,6 +1989,9 @@ main(int ac, char **av)
 	/* Log the connection. */
 	verbose("Connection from %.500s port %d", remote_ip, remote_port);
 
+	/* set the HPN options for the child */
+	channel_set_hpn(options.hpn_disabled, options.hpn_buffer_size);
+
 	/*
 	 * We don't want to listen forever unless the other side
 	 * successfully authenticates itself.  So we set up an alarm which is
@@ -2332,9 +2348,15 @@ do_ssh2_kex(void)
 {
 	Kex *kex;
 
+	myflag++;
+	debug ("MYFLAG IS %d", myflag);
 	if (options.ciphers != NULL) {
 		myproposal[PROPOSAL_ENC_ALGS_CTOS] =
 		myproposal[PROPOSAL_ENC_ALGS_STOC] = options.ciphers;
+	} else if (options.none_enabled == 1) {
+		debug ("WARNING: None cipher enabled");
+		myproposal[PROPOSAL_ENC_ALGS_CTOS] =
+		myproposal[PROPOSAL_ENC_ALGS_STOC] = KEX_ENCRYPT_INCLUDE_NONE;
 	}
 	myproposal[PROPOSAL_ENC_ALGS_CTOS] =
 	    compat_cipher_proposal(myproposal[PROPOSAL_ENC_ALGS_CTOS]);
diff --git a/sshd_config b/sshd_config
index 9cd2fdd..27f43eb 100644
--- a/sshd_config
+++ b/sshd_config
@@ -120,6 +120,20 @@ UsePrivilegeSeparation sandbox		# Default for new installations.
 # override default of no subsystems
 Subsystem	sftp	/usr/libexec/sftp-server
 
+# the following are HPN related configuration options
+# tcp receive buffer polling. disable in non autotuning kernels
+#TcpRcvBufPoll yes
+ 
+# allow the use of the none cipher
+#NoneEnabled no
+
+# disable hpn performance boosts
+#HPNDisabled no
+
+# buffer size for hpn to non-hpn connections
+#HPNBufferSize 2048
+
+
 # Example of overriding settings on a per-user basis
 #Match User anoncvs
 #	X11Forwarding no
diff --git a/version.h b/version.h
index 784f707..c8f04d5 100644
--- a/version.h
+++ b/version.h
@@ -3,4 +3,5 @@
 #define SSH_VERSION	"OpenSSH_6.2"
 
 #define SSH_PORTABLE	"p1"
-#define SSH_RELEASE	SSH_VERSION SSH_PORTABLE
+#define SSH_HPN		"-hpn13v11"
+#define SSH_RELEASE	SSH_VERSION SSH_PORTABLE SSH_HPN