1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
|
From e282ad866be628951a95d297207c9a5580f4101d Mon Sep 17 00:00:00 2001
From: Neil Armstrong <narmstrong@baylibre.com>
Date: Mon, 2 Jul 2018 12:21:55 +0200
Subject: [PATCH] drm: bridge: dw-hdmi: Use AUTO CTS setup mode when non-AHB
audio
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 41 ++++++++++++++++++++-----------
1 file changed, 26 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 3c136f2b..a68ffbb 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -430,8 +430,12 @@ static void hdmi_set_cts_n(struct dw_hdmi *hdmi, unsigned int cts,
/* nshift factor = 0 */
hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_N_SHIFT_MASK, HDMI_AUD_CTS3);
- hdmi_writeb(hdmi, ((cts >> 16) & HDMI_AUD_CTS3_AUDCTS19_16_MASK) |
- HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3);
+ /* Use Auto CTS mode with CTS is unknown */
+ if (cts)
+ hdmi_writeb(hdmi, ((cts >> 16) & HDMI_AUD_CTS3_AUDCTS19_16_MASK) |
+ HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3);
+ else
+ hdmi_writeb(hdmi, 0, HDMI_AUD_CTS3);
hdmi_writeb(hdmi, (cts >> 8) & 0xff, HDMI_AUD_CTS2);
hdmi_writeb(hdmi, cts & 0xff, HDMI_AUD_CTS1);
@@ -501,24 +505,31 @@ static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
{
unsigned long ftdms = pixel_clk;
unsigned int n, cts;
+ u8 config3;
u64 tmp;
n = hdmi_compute_n(sample_rate, pixel_clk);
- /*
- * Compute the CTS value from the N value. Note that CTS and N
- * can be up to 20 bits in total, so we need 64-bit math. Also
- * note that our TDMS clock is not fully accurate; it is accurate
- * to kHz. This can introduce an unnecessary remainder in the
- * calculation below, so we don't try to warn about that.
- */
- tmp = (u64)ftdms * n;
- do_div(tmp, 128 * sample_rate);
- cts = tmp;
+ config3 = hdmi_readb(hdmi, HDMI_CONFIG3_ID);
- dev_dbg(hdmi->dev, "%s: fs=%uHz ftdms=%lu.%03luMHz N=%d cts=%d\n",
- __func__, sample_rate, ftdms / 1000000, (ftdms / 1000) % 1000,
- n, cts);
+ if (config3 & HDMI_CONFIG3_AHBAUDDMA) {
+ /*
+ * Compute the CTS value from the N value. Note that CTS and N
+ * can be up to 20 bits in total, so we need 64-bit math. Also
+ * note that our TDMS clock is not fully accurate; it is
+ * accurate to kHz. This can introduce an unnecessary remainder
+ * in the calculation below, so we don't try to warn about that.
+ */
+ tmp = (u64)ftdms * n;
+ do_div(tmp, 128 * sample_rate);
+ cts = tmp;
+
+ dev_dbg(hdmi->dev, "%s: fs=%uHz ftdms=%lu.%03luMHz N=%d cts=%d\n",
+ __func__, sample_rate,
+ ftdms / 1000000, (ftdms / 1000) % 1000,
+ n, cts);
+ } else
+ cts = 0;
spin_lock_irq(&hdmi->audio_lock);
hdmi->audio_n = n;
|
