squark: reorganize sources to src directory

1 files changed, 0 insertions, 74 deletions

diff --git a/squark-auth-snmp.8 b/squark-auth-snmp.8
deleted file mode 100644
index ca4be00..0000000
--- a/squark-auth-snmp.8
+++ /dev/null
@@ -1,74 +0,0 @@
-.TH squark-auth 8 "23 July 2010" "" "Squark Documentation"
-
-.SH NAME
-squark-auth \- Squark authentication helper for Squid
-
-.SH SYNOPSIS
-.BI "squark-auth [" "option" "]..."
-
-.SH DESCRIPTION
-.B squark\-auth
-is an external acl helper for Squid. It maps IP-address to
-credentials information collected from managed switches using SNMP.
-
-.SS Theory Of Operation
-The code first maps received IP to a MAC using SNMP query from the
-router connecting to client IP's subnet.
-.PP
-This is followed with MAC tracing of the MAC address. The switch 
-BRIDGE-MIB forwarding database is queried to detect which switch port
-is active for the MAC. LLDP-MIB is then queried to receive IP-address
-of the switch connected to this port. This is repeated until we end up
-in "edge switch" which does not have any LLDP information available
-for the port where the MAC address is assigned.
-.PP
-Finally, the edge switch is interrogated for detailed information of
-the port and connected client.
-
-.SH OPTIONS
-The following options are recognized:
-
-.IP "\fB\-c \fIsnmp\-communicty"
-Allows specifying SNMP community. If specified SNMPv2c mode is assumed.
-To use SNMPv3 you need to configure the required version and authentication
-keys using standard net-snmp configuration files.
-
-.IP "\fB\-r \fIlayer3\-root\-ip"
-The management IP-address of the default gateway router for the clients.
-If you have multiple "routing switches", this should be the closest such
-switch to the machine running squark\-auth.
-
-.IP "\fB\-i \fIlayer3\-root\-interface"
-The router's network interface connected to the subnet containing the
-clients.
-
-.IP "\fB\-R \fIlayer2\-root\-ip"
-In case the router and the first switch are different devices and the
-router does not support BRIDGE-MIB, this can be used to specify the
-IP-address of the first switch. Defaults to \fIlayer3\-root\-ip\fR.
-
-.IP "\fB-v \fIlayer2\-vlan"
-The VLAN index of the client's subnet for the layer2 switches.
-
-.IP "\fB-f \fIusername\-format"
-Specifies the format of the username to given back for squid. The
-following format specifiers are supported:
-.TS Header
-llw(2i).
-%I	Client IP address
-%M	Client MAC address
-%N	Edge switch sysName
-%L	Edge switch sysLocation
-%i	Edge switch port ifIndex
-%n	Edge switch port ifName 
-%d	Edge switch port ifDescr
-%w	Edge switch HP ProCurve WebAuth username
-.TE
-
-Defaults to "%w".
-
-.IP "\fB-T \fItopology\-file"
-Load external topology information for switches not supporting LLDP.
-
-.SH AUTHORS
-Timo Teras <timo.teras@iki.fi>