testing/fprobe-ulog: move to main

4 files changed, 206 insertions, 0 deletions

diff --git a/main/fprobe-ulog/APKBUILD b/main/fprobe-ulog/APKBUILD
new file mode 100644
index 000000000..76c665c87
--- /dev/null
+++ b/main/fprobe-ulog/APKBUILD
@@ -0,0 +1,51 @@
+# Maintainer: Leonardo Arena <rnalrd@alpinelinux.org>
+pkgname=fprobe-ulog
+pkgver=1.1
+pkgrel=1
+pkgdesc="netfilter-based tool that collect network traffic"
+url="http://fprobe.sourceforge.net/"
+arch="all"
+license="GPL"
+depends=
+makedepends=""
+install=""
+subpackages="$pkgname-doc"
+source="http://downloads.sourceforge.net/project/fprobe/$pkgname/$pkgver/$pkgname-1.1.tar.bz2
+	fprobe-ulog.confd
+	fprobe-ulog.initd
+	fprobe-1.1-pidfile-sanity.patch
+	"
+
+_builddir="$srcdir"/$pkgname-$pkgver
+
+prepare() {
+	cd $_builddir
+	for i in ../*.patch
+	do
+		msg "Applying $i"
+		patch -p1 < ../$i || exit 1
+	done
+}
+
+build() {
+	cd "$_builddir"
+	./configure --prefix=/usr \
+		--sysconfdir=/etc \
+		--mandir=/usr/share/man \
+		--infodir=/usr/share/info
+	make || return 1
+}
+
+package() {
+	cd "$_builddir"
+	make DESTDIR="$pkgdir" install
+
+	install -m755 -D "$srcdir"/$pkgname.initd "$pkgdir"/etc/init.d/$pkgname
+	install -m644 -D "$srcdir"/$pkgname.confd "$pkgdir"/etc/conf.d/$pkgname
+
+}
+
+md5sums="cdb2e4edc47e8a3d5479eeabfb979ebc  fprobe-ulog-1.1.tar.bz2
+a92104da52c99532d1d01007b78940fc  fprobe-ulog.confd
+744975c055421223940a278517b34d47  fprobe-ulog.initd
+f1316ad835c1a2b6565b4dc448b022df  fprobe-1.1-pidfile-sanity.patch"
diff --git a/main/fprobe-ulog/fprobe-1.1-pidfile-sanity.patch b/main/fprobe-ulog/fprobe-1.1-pidfile-sanity.patch
new file mode 100644
index 000000000..5f7b79bd8
--- /dev/null
+++ b/main/fprobe-ulog/fprobe-1.1-pidfile-sanity.patch
@@ -0,0 +1,48 @@
+If we are using the chroot() option or the setuid options, we must create the
+pidfile before doing the chroot OR the setreuid. It's actually best for
+start-stop-daemon if we create the pidfile from the master side of the fork()
+before it exits, since most of the startup checks happen after the chroot()
+unfortunetly.
+
+Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
+
+diff -Nuar fprobe-1.1.orig/src/fprobe.c fprobe-1.1/src/fprobe.c
+--- fprobe-1.1.orig/src/fprobe-ulog.c	2005-01-30 08:43:35.000000000 +0000
++++ fprobe-1.1/src/fprobe-ulog.c	2008-03-16 20:51:24.000000000 +0000
+@@ -1379,7 +1379,8 @@
+ 
+ 	my_log_open(ident, verbosity, log_dest);
+ 	if (!(log_dest & 2)) {
+-		switch (fork()) {
++		pid_t childpid = fork();
++		switch (childpid) {
+ 			case -1:
+ 				fprintf(stderr, "fork(): %s", strerror(errno));
+ 				exit(1);
+@@ -1392,6 +1393,12 @@
+ 				break;
+ 
+ 			default:
++				if (!(pidfile = fopen(pidfilepath, "w")))
++					my_log(LOG_ERR, "Can't create pid file. fopen(): %s", strerror(errno));
++				else {
++					fprintf(pidfile, "%ld\n", (long) childpid);
++					fclose(pidfile);
++				}
+ 				exit(0);
+ 		}
+ 	} else {
+@@ -1548,13 +1555,6 @@
+ 		}
+ 	}
+ 
+-	if (!(pidfile = fopen(pidfilepath, "w")))
+-		my_log(LOG_ERR, "Can't create pid file. fopen(): %s", strerror(errno));
+-	else {
+-		fprintf(pidfile, "%ld\n", (long) pid);
+-		fclose(pidfile);
+-	}
+-
+ 	my_log(LOG_INFO, "pid: %d", pid);
+ 	my_log(LOG_INFO, "interface: %s, datalink: %s (%d)",
+ 		dev, dlt[link_type_idx].descr, link_type);
diff --git a/main/fprobe-ulog/fprobe-ulog.confd b/main/fprobe-ulog/fprobe-ulog.confd
new file mode 100644
index 000000000..758d97f46
--- /dev/null
+++ b/main/fprobe-ulog/fprobe-ulog.confd
@@ -0,0 +1,68 @@
+# Config file for /etc/init.d/fprobe
+DAEMON=/usr/sbin/fprobe-ulog
+
+# Do we want the interface in promiscous mode [yes/no]
+#PROMISC=no
+
+# If configured, only capture packets matching this tcpdump expression
+#FILTER=""
+
+# Flow state timers
+#TIMER_EXPIRED=5
+#TIMER_FRAGMENTED=30
+#TIMER_IDLE=60
+#TIMER_ACTIVE=300
+
+# This is the default and should be left unless you know what you are doing
+#FLOW_VER=5
+
+# local ip. if configured fprobe will use this as the source IP for sending ALL flow data
+# If you want to specify a specific source address per collecter, customize it below
+#LOCALIP=
+
+# SNMP iface id
+SNMP_IFACE="${IFACE//eth}"
+
+# Maximum number of concurrent flows to track
+# using a specified amount of memory
+#MEMBULK=10000
+#MEMLIMIT=
+
+# Pending queue
+#PENDING=100
+
+# Kernel capture buffer size (kB)
+#KERNBUF=1024
+
+# Realtime priority [0=disabled, 1..99]
+#RTPRIO=0
+
+# Delay N nanoseconds after each B bytes
+#DELAY="0:0"
+
+# How much of the start of each packet to grab
+#SNAPLEN=256
+
+# chroot() to this location after startup
+CHROOT="/var/empty"
+
+# User to run as. must have perms to the pidfile directory /var/run/fprobe/
+USER=nobody
+
+# logging level for syslog (0=EMERG, ..., 6=INFO, 7=DEBUG)
+#LOGLEVEL=6
+
+# If you want to run multiple instances of fprobe,
+# You MUST set this variable to a unique INTEGER for each one!
+PIDFILE_ID=''
+
+# remote ip. this is where we send flows
+REMOTEIP=127.0.0.1
+# port to listen on
+PORT=2055
+# Collector type, see the manpage for valid types
+TYPE=''
+
+# If you want multiple collectors, just specify each one here
+COLLECTORS="${REMOTEIP}:${PORT}/${LOCALIP}/${TYPE}"
+
diff --git a/main/fprobe-ulog/fprobe-ulog.initd b/main/fprobe-ulog/fprobe-ulog.initd
new file mode 100755
index 000000000..d8f5c9acf
--- /dev/null
+++ b/main/fprobe-ulog/fprobe-ulog.initd
@@ -0,0 +1,39 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+depend() {
+	need net
+	after firewall
+}
+
+PIDFILE_EXTRA=""
+[ -n "$PIDFILE_ID" ] && PIDFILE_EXTRA="[$PIDFILE_ID]"
+PIDFILE="/var/run/fprobe-ulog$PIDFILE_EXTRA.pid"
+
+start() {
+	ebegin "Starting fprobe-ulog"
+	local OPTS=""
+	set --
+	[ -n "${FILTER}" ] && set -- -f "${FILTER}"
+	for optname in s:TIMER_EXPIRED g:TIME_FRAGMENTED d:TIMER_IDLE \
+		e:TIMER_ACTIVE n:FLOW_VER a:LOCALIP X:SNMP_IFACE b:MEMBULK \
+		m:MEMLIMIT q:PENDING B:KERNBUF r:RTPRIO t:DELAY \
+		c:CHROOT u:USER v:LOGLEVEL ; do
+	    opt="${optname/:*}"	optvar="${optname/*:}"
+	    eval optvalue="\$$optvar"
+	    [ -n "$optvalue" ] && OPTS="${OPTS} -${opt} ${optvalue}"
+	done
+	OPTS="${OPTS} -l 1:${PIDFILE_ID} ${COLLECTORS}"
+	start-stop-daemon --start --exec $DAEMON \
+		--pidfile ${PIDFILE} \
+		-- "$@" ${OPTS}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping fprobe-ulog"
+	start-stop-daemon --stop --quiet --exec $DAEMON \
+		--pidfile ${PIDFILE}
+	eend $?
+}