1 files changed, 70 insertions, 0 deletions
diff --git a/main/fprobe/fprobe.confd b/main/fprobe/fprobe.confd
new file mode 100644
index 000000000..1c444f554
--- /dev/null
+++ b/main/fprobe/fprobe.confd
@@ -0,0 +1,70 @@
+# Config file for /etc/init.d/fprobe
+
+# Do we want the interface in promiscous mode [yes/no]
+#PROMISC=no
+
+# Interface
+IFACE=eth0
+
+# If configured, only capture packets matching this tcpdump expression
+#FILTER=""
+
+# Flow state timers
+#TIMER_EXPIRED=5
+#TIMER_FRAGMENTED=30
+#TIMER_IDLE=60
+#TIMER_ACTIVE=300
+
+# This is the default and should be left unless you know what you are doing
+#FLOW_VER=5
+
+# local ip. if configured fprobe will use this as the source IP for sending ALL flow data
+# If you want to specify a specific source address per collecter, customize it below
+#LOCALIP=
+
+# SNMP iface id
+SNMP_IFACE="${IFACE//eth}"
+
+# Maximum number of concurrent flows to track
+# using a specified amount of memory
+#MEMBULK=10000
+#MEMLIMIT=
+
+# Pending queue
+#PENDING=100
+
+# Kernel capture buffer size (kB)
+#KERNBUF=1024
+
+# Realtime priority [0=disabled, 1..99]
+#RTPRIO=0
+
+# Delay N nanoseconds after each B bytes
+#DELAY="0:0"
+
+# How much of the start of each packet to grab
+#SNAPLEN=256
+
+# chroot() to this location after startup
+CHROOT="/var/empty"
+
+# User to run as. must have perms to the pidfile directory /var/run/fprobe/
+USER=nobody
+
+# logging level for syslog (0=EMERG, ..., 6=INFO, 7=DEBUG)
+#LOGLEVEL=6
+
+# If you want to run multiple instances of fprobe,
+# You MUST set this variable to a unique INTEGER for each one!
+PIDFILE_ID=''
+
+# remote ip. this is where we send flows
+REMOTEIP=127.0.0.1
+# port to listen on
+PORT=2055
+# Collector type, see the manpage for valid types
+TYPE=''
+
+# If you want multiple collectors, just specify each one here
+COLLECTORS="${REMOTEIP}:${PORT}/${LOCALIP}/${TYPE}"
+