From 2d2ddf507bf1ae2f4cc595b23b8e018398cbe8dd Mon Sep 17 00:00:00 2001 From: Natanael Copa Date: Thu, 23 Jul 2009 18:24:11 +0000 Subject: move core/* to main/ added maintainer to several packages as well --- main/ppp/APKBUILD | 44 +++++++ main/ppp/ip-down | 4 + main/ppp/ip-up | 4 + main/ppp/options | 352 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ main/ppp/plog | 7 ++ main/ppp/poff | 103 ++++++++++++++++ main/ppp/pon | 32 +++++ main/ppp/pon.1 | 121 +++++++++++++++++++ 8 files changed, 667 insertions(+) create mode 100644 main/ppp/APKBUILD create mode 100644 main/ppp/ip-down create mode 100644 main/ppp/ip-up create mode 100644 main/ppp/options create mode 100644 main/ppp/plog create mode 100644 main/ppp/poff create mode 100644 main/ppp/pon create mode 100644 main/ppp/pon.1 (limited to 'main/ppp') diff --git a/main/ppp/APKBUILD b/main/ppp/APKBUILD new file mode 100644 index 000000000..c50ea10c0 --- /dev/null +++ b/main/ppp/APKBUILD @@ -0,0 +1,44 @@ +# Maintainer: Natanael Copa +pkgname=ppp +pkgver=2.4.4 +pkgrel=0 +pkgdesc="A daemon which implements the PPP protocol for dial-up networking" +url="http://www.samba.org/ppp/" +license="custom:GPL/BSD" +depends="uclibc libpcap" +makedepends="libpcap-dev" +subpackages="$pkgname-dev $pkgname-doc" +source="ftp://ftp.samba.org/pub/$pkgname/$pkgname-$pkgver.tar.gz + options + pon + poff + plog + pon.1 + ip-up + ip-down" + +build () { + cd "$srcdir"/$pkgname-$pkgver + ./configure --prefix=/usr + make COPTS="$CFLAGS" || return 1 + make INSTROOT="$pkgdir" install + + install -D -m644 "$srcdir"/options "$pkgdir"/etc/ppp/options + install -D -m755 "$srcdir"/ip-up "$pkgdir"/etc/ppp/ip-up + install -D -m755 "$srcdir"/ip-down "$pkgdir"/etc/ppp/ip-down + install -D -m755 "$srcdir"/pon "$pkgdir"/usr/bin/pon + install -D -m755 "$srcdir"/poff "$pkgdir"/usr/bin/poff + install -D -m755 "$srcdir"/plog "$pkgdir"/usr/sbin/plog + install -D -m600 etc.ppp/pap-secrets "$pkgdir"/etc/ppp/pap-secrets + install -D -m600 etc.ppp/chap-secrets "$pkgdir"/etc/ppp/chap-secrets + install -D -m644 "$srcdir"/pon.1 "$pkgdir"/usr/share/man/man1/pon.1 + mkdir -p "$pkgdir"/etc/ppp/peers +} +md5sums="183800762e266132218b204dfb428d29 ppp-2.4.4.tar.gz +7a9259a8f038073eeea7e4552ff1849f options +48c024f73a80c8b69c4def22f86902cc pon +2d811f8470ccdea3b8c4505a438483e9 poff +86cdaf133f7a79fb464f02d83afc7734 plog +44cc662ba9aa61dd9add3ddd4c5ded57 pon.1 +fac0c773490371ea673f4be0977a230f ip-up +a88b40b1bf91eb5cca3762b7195e4fe2 ip-down" diff --git a/main/ppp/ip-down b/main/ppp/ip-down new file mode 100644 index 000000000..3a88c496b --- /dev/null +++ b/main/ppp/ip-down @@ -0,0 +1,4 @@ +#!/bin/sh +# +# This script is run by pppd after the connection has ended. +# diff --git a/main/ppp/ip-up b/main/ppp/ip-up new file mode 100644 index 000000000..57e09c004 --- /dev/null +++ b/main/ppp/ip-up @@ -0,0 +1,4 @@ +#!/bin/sh +# +# This script is run by pppd when there's a successful ppp connection. +# diff --git a/main/ppp/options b/main/ppp/options new file mode 100644 index 000000000..63691842c --- /dev/null +++ b/main/ppp/options @@ -0,0 +1,352 @@ +# /etc/ppp/options +# +# Originally created by Jim Knoble +# Modified for Debian by alvar Bray +# Modified for PPP Server setup by Christoph Lameter +# Modified for ArchLinux by Manolis Tzanidakis +# +# To quickly see what options are active in this file, use this command: +# egrep -v '#|^ *$' /etc/ppp/options + +# Specify which DNS Servers the incoming Win95 or WinNT Connection should use +# Two Servers can be remotely configured +# ms-dns 192.168.1.1 +# ms-dns 192.168.1.2 + +# Specify which WINS Servers the incoming connection Win95 or WinNT should use +# ms-wins 192.168.1.50 +# ms-wins 192.168.1.51 + +# Run the executable or shell command specified after pppd has +# terminated the link. This script could, for example, issue commands +# to the modem to cause it to hang up if hardware modem control signals +# were not available. +#disconnect "chat -- \d+++\d\c OK ath0 OK" + +# async character map -- 32-bit hex; each bit is a character +# that needs to be escaped for pppd to receive it. 0x00000001 +# represents '\x01', and 0x80000000 represents '\x1f'. +asyncmap 0 + +# Require the peer to authenticate itself before allowing network +# packets to be sent or received. +# Please do not disable this setting. It is expected to be standard in +# future releases of pppd. Use the call option (see manpage) to disable +# authentication for specific peers. +auth + +# Use hardware flow control (i.e. RTS/CTS) to control the flow of data +# on the serial port. +crtscts + +# Use software flow control (i.e. XON/XOFF) to control the flow of data +# on the serial port. +#xonxoff + +# Specifies that certain characters should be escaped on transmission +# (regardless of whether the peer requests them to be escaped with its +# async control character map). The characters to be escaped are +# specified as a list of hex numbers separated by commas. Note that +# almost any character can be specified for the escape option, unlike +# the asyncmap option which only allows control characters to be +# specified. The characters which may not be escaped are those with hex +# values 0x20 - 0x3f or 0x5e. +#escape 11,13,ff + +# Don't use the modem control lines. +#local + +# Specifies that pppd should use a UUCP-style lock on the serial device +# to ensure exclusive access to the device. +lock + +# Don't show the passwords when logging the contents of PAP packets. +# This is the default. +hide-password + +# When logging the contents of PAP packets, this option causes pppd to +# show the password string in the log message. +#show-password + +# Use the modem control lines. On Ultrix, this option implies hardware +# flow control, as for the crtscts option. (This option is not fully +# implemented.) +modem + +# Set the MRU [Maximum Receive Unit] value to for negotiation. pppd +# will ask the peer to send packets of no more than bytes. The +# minimum MRU value is 128. The default MRU value is 1500. A value of +# 296 is recommended for slow links (40 bytes for TCP/IP header + 256 +# bytes of data). +#mru 542 + +# Set the interface netmask to , a 32 bit netmask in "decimal dot" +# notation (e.g. 255.255.255.0). +#netmask 255.255.255.0 + +# Disables the default behaviour when no local IP address is specified, +# which is to determine (if possible) the local IP address from the +# hostname. With this option, the peer will have to supply the local IP +# address during IPCP negotiation (unless it specified explicitly on the +# command line or in an options file). +#noipdefault + +# Enables the "passive" option in the LCP. With this option, pppd will +# attempt to initiate a connection; if no reply is received from the +# peer, pppd will then just wait passively for a valid LCP packet from +# the peer (instead of exiting, as it does without this option). +#passive + +# With this option, pppd will not transmit LCP packets to initiate a +# connection until a valid LCP packet is received from the peer (as for +# the "passive" option with old versions of pppd). +#silent + +# Don't request or allow negotiation of any options for LCP and IPCP +# (use default values). +#-all + +# Disable Address/Control compression negotiation (use default, i.e. +# address/control field disabled). +#-ac + +# Disable asyncmap negotiation (use the default asyncmap, i.e. escape +# all control characters). +#-am + +# Don't fork to become a background process (otherwise pppd will do so +# if a serial device is specified). +#-detach + +# Disable IP address negotiation (with this option, the remote IP +# address must be specified with an option on the command line or in +# an options file). +#-ip + +# Disable IPCP negotiation and IP communication. This option should +# only be required if the peer is buggy and gets confused by requests +# from pppd for IPCP negotiation. +#noip + +# Disable magic number negotiation. With this option, pppd cannot +# detect a looped-back line. +#-mn + +# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e. +# 1500). +#-mru + +# Disable protocol field compression negotiation (use default, i.e. +# protocol field compression disabled). +#-pc + +# Require the peer to authenticate itself using PAP. +#+pap + +# Don't agree to authenticate using PAP. +#-pap + +# Require the peer to authenticate itself using CHAP [Cryptographic +# Handshake Authentication Protocol] authentication. +#+chap + +# Don't agree to authenticate using CHAP. +#-chap + +# Disable negotiation of Van Jacobson style IP header compression (use +# default, i.e. no compression). +#-vj + +# Increase debugging level (same as -d). If this option is given, pppd +# will log the contents of all control packets sent or received in a +# readable form. The packets are logged through syslog with facility +# daemon and level debug. This information can be directed to a file by +# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If +# pppd is compiled with extra debugging enabled, it will log messages +# using facility local2 instead of daemon). +#debug + +# Append the domain name to the local host name for authentication +# purposes. For example, if gethostname() returns the name porsche, +# but the fully qualified domain name is porsche.Quotron.COM, you would +# use the domain option to set the domain name to Quotron.COM. +#domain + +# Enable debugging code in the kernel-level PPP driver. The argument n +# is a number which is the sum of the following values: 1 to enable +# general debug messages, 2 to request that the contents of received +# packets be printed, and 4 to request that the contents of transmitted +# packets be printed. +#kdebug n + +# Set the MTU [Maximum Transmit Unit] value to . Unless the peer +# requests a smaller value via MRU negotiation, pppd will request that +# the kernel networking code send data packets of no more than n bytes +# through the PPP network interface. +#mtu + +# Set the name of the local system for authentication purposes to . +# This is a privileged option. With this option, pppd will use lines in the +# secrets files which have as the second field when looking for a +# secret to use in authenticating the peer. In addition, unless overridden +# with the user option, will be used as the name to send to the peer +# when authenticating the local system to the peer. (Note that pppd does +# not append the domain name to .) +#name + +# Enforce the use of the hostname as the name of the local system for +# authentication purposes (overrides the name option). +#usehostname + +# Set the assumed name of the remote system for authentication purposes +# to . +#remotename + +# Add an entry to this system's ARP [Address Resolution Protocol] +# table with the IP address of the peer and the Ethernet address of this +# system. +proxyarp + +# Use the system password database for authenticating the peer using +# PAP. Note: mgetty already provides this option. If this is specified +# then dialin from users using a script under Linux to fire up ppp wont work. +# login + +# If this option is given, pppd will send an LCP echo-request frame to the +# peer every n seconds. Normally the peer should respond to the echo-request +# by sending an echo-reply. This option can be used with the +# lcp-echo-failure option to detect that the peer is no longer connected. +lcp-echo-interval 30 + +# If this option is given, pppd will presume the peer to be dead if n +# LCP echo-requests are sent without receiving a valid LCP echo-reply. +# If this happens, pppd will terminate the connection. Use of this +# option requires a non-zero value for the lcp-echo-interval parameter. +# This option can be used to enable pppd to terminate after the physical +# connection has been broken (e.g., the modem has hung up) in +# situations where no hardware modem control lines are available. +lcp-echo-failure 4 + +# Set the LCP restart interval (retransmission timeout) to seconds +# (default 3). +#lcp-restart + +# Set the maximum number of LCP terminate-request transmissions to +# (default 3). +#lcp-max-terminate + +# Set the maximum number of LCP configure-request transmissions to +# (default 10). +#lcp-max-configure + +# Set the maximum number of LCP configure-NAKs returned before starting +# to send configure-Rejects instead to (default 10). +#lcp-max-failure + +# Set the IPCP restart interval (retransmission timeout) to +# seconds (default 3). +#ipcp-restart + +# Set the maximum number of IPCP terminate-request transmissions to +# (default 3). +#ipcp-max-terminate + +# Set the maximum number of IPCP configure-request transmissions to +# (default 10). +#ipcp-max-configure + +# Set the maximum number of IPCP configure-NAKs returned before starting +# to send configure-Rejects instead to (default 10). +#ipcp-max-failure + +# Set the PAP restart interval (retransmission timeout) to seconds +# (default 3). +#pap-restart + +# Set the maximum number of PAP authenticate-request transmissions to +# (default 10). +#pap-max-authreq + +# Set the maximum time that pppd will wait for the peer to authenticate +# itself with PAP to seconds (0 means no limit). +#pap-timeout + +# Set the CHAP restart interval (retransmission timeout for +# challenges) to seconds (default 3). +#chap-restart + +# Set the maximum number of CHAP challenge transmissions to +# (default 10). +#chap-max-challenge + +# If this option is given, pppd will rechallenge the peer every +# seconds. +#chap-interval + +# With this option, pppd will accept the peer's idea of our local IP +# address, even if the local IP address was specified in an option. +#ipcp-accept-local + +# With this option, pppd will accept the peer's idea of its (remote) IP +# address, even if the remote IP address was specified in an option. +#ipcp-accept-remote + +# Disable the IPXCP and IPX protocols. +# To let pppd pass IPX packets comment this out --- you'll probably also +# want to install ipxripd, and have the Internal IPX Network option enabled +# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info. +noipx + +# Exit once a connection has been made and terminated. This is the default, +# unless the `persist' or `demand' option has been specified. +#nopersist + +# Do not exit after a connection is terminated; instead try to reopen +# the connection. +#persist + +# Terminate after n consecutive failed connection attempts. +# A value of 0 means no limit. The default value is 10. +#maxfail + +# Initiate the link only on demand, i.e. when data traffic is present. +# With this option, the remote IP address must be specified by the user on +# the command line or in an options file. Pppd will initially configure +# the interface and enable it for IP traffic without connecting to the peer. +# When traffic is available, pppd will connect to the peer and perform +# negotiation, authentication, etc. When this is completed, pppd will +# commence passing data packets (i.e., IP packets) across the link. +#demand + +# Specifies that pppd should disconnect if the link is idle for seconds. +# The link is idle when no data packets (i.e. IP packets) are being sent or +# received. Note: it is not advisable to use this option with the persist +# option without the demand option. If the active-filter option is given, +# data packets which are rejected by the specified activity filter also +# count as the link being idle. +#idle + +# Specifies how many seconds to wait before re-initiating the link after +# it terminates. This option only has any effect if the persist or demand +# option is used. The holdoff period is not applied if the link was +# terminated because it was idle. +#holdoff + +# Wait for up n milliseconds after the connect script finishes for a valid +# PPP packet from the peer. At the end of this time, or when a valid PPP +# packet is received from the peer, pppd will commence negotiation by +# sending its first LCP packet. The default value is 1000 (1 second). +# This wait period only applies if the connect or pty option is used. +#connect-delay + +# Packet filtering: for more information, see pppd(8) +# Any packets matching the filter expression will be interpreted as link +# activity, and will cause a "demand" connection to be activated, and reset +# the idle connection timer. (idle option) +# The filter expression is akin to that of tcpdump(1) +#active-filter + +# uncomment the line below this if you use PPPoE +#plugin /usr/lib/pppd/plugins/pppoe.so + +# ------ diff --git a/main/ppp/plog b/main/ppp/plog new file mode 100644 index 000000000..84d2c7340 --- /dev/null +++ b/main/ppp/plog @@ -0,0 +1,7 @@ +#!/bin/sh + +if [ -s /var/log/ppp.log ]; then + exec tail "$@" /var/log/ppp.log +else + exec tail "$@" /var/log/syslog | grep ' \(pppd\|chat\)\[' +fi diff --git a/main/ppp/poff b/main/ppp/poff new file mode 100644 index 000000000..8b4dffc59 --- /dev/null +++ b/main/ppp/poff @@ -0,0 +1,103 @@ +#!/bin/sh + +# Written by John Hasler and based on work +# by Phil Hands . Distributed under the GNU GPL + +if [ -x /usr/bin/kill ]; then + KILL="/usr/bin/kill" +else + KILL="/bin/kill" +fi +SIG=TERM +DONE="stopped" +MODE="" + +usage () +{ + cat < pon.txt +.\" +.TH PON 1 "July 2000" "Debian Project" "Debian PPPD" +.SH NAME +pon, poff, plog \- starts up, shuts down or lists the log of PPP connections +.SH SYNOPSIS +.B pon +[ isp-name [ options ] ] +.br +.B poff +[ -r ] [ -d ] [ -c ] [ -a ] [ -h ] [ isp-name ] +.br +.B plog +[ arguments ] +.SH DESCRIPTION +This manual page describes the \fBpon\fP, \fBplog\fP and \fBpoff\fP +scripts, which allow users to control PPP connections. +.. +.SS pon +\fBpon\fP, invoked without arguments, runs the \fI/etc/ppp/ppp_on_boot\fP +file, if it exists and is executable. Otherwise, a PPP connection will be +started using configuration from \fI/etc/ppp/peers/provider\fP. +This is the default behaviour unless an \fBisp-name\fP argument is given. +.PP +For instance, to use ISP configuration "myisp" run: +.IP +pon myisp +.PP +\fBpon\fP will then use the options file \fI/etc/ppp/peers/myisp\fP. +You can pass additional \fBoptions\fP after the ISP name, too. +\fBpon\fP can be used to run multiple, simultaneous PPP connections. +.. +.SS poff +\fBpoff\fP closes a PPP connection. If more than one PPP connection exists, +the one named in the argument to \fBpoff\fP will be killed, e.g. +.IP +poff myprovider2 +.PP +will terminate the connection to myprovider2, and leave the PPP connections +to e.g. "myprovider1" or "myprovider3" up and running. +.PP +\fBpoff\fP takes the following command line options: +.RS +.TP +.B "\-r" +causes the connection to be redialed after it is dropped. +.TP +.B "\-d" +toggles the state of pppd's debug option. +.TP +.B "\-c" +causes +.BR pppd (8) +to renegotiate compression. +.TP +.B "\-a" +stops all running ppp connections. If the argument \fBisp-name\fP +is given it will be ignored. +.TP +.B "\-h" +displays help information. +.TP +.B "\-v" +prints the version and exits. +.PP +If no argument is given, \fBpoff\fP will stop or signal pppd if and only +if there is exactly one running. If more than one connection is active, +it will exit with an error code of 1. +.. +.SS plog +\fBplog\fP shows you the last few lines of \fI/var/log/ppp.log\fP. If that +file doesn't exist, it shows you the last few lines of your +\fI/var/log/syslog\fP file, but excluding the lines not generated by pppd. +This script makes use of the +.BR tail (1) +command, so arguments that can be passed to +.BR tail (1) +can also be passed to \fBplog\fP. +.PP +Note: the \fBplog\fP script can only be used by root or another system +administrator in group "adm", due to security reasons. Also, to have all +pppd-generated information in one logfile, that plog can show, you need the +following line in your \fI/etc/syslog.conf\fP file: +.PP +local2.* -/var/log/ppp.log +.RE +.SH FILES +.TP +.I /etc/ppp/options +PPPd system options file. +.TP +.I /etc/ppp/pap-secrets +System PAP passwords file. +.TP +.I /etc/ppp/chap-secrets +System CHAP passwords file. +.TP +.I /etc/ppp/peers/ +Directory holding the peer options files. The default file is called +\fIprovider\fP. +.TP +.I /etc/chatscripts/provider +The chat script invoked from the default \fI/etc/ppp/peers/provider\fP. +.TP +.I /var/log/ppp.log +The default PPP log file. +.SH AUTHORS +The p-commands were written by Christoph Lameter . +Updated and revised by Philip Hands . +.br +This manual was written by Othmar Pasteka . Modified +by Rob Levin , with some extensions taken from +the old p-commands manual written by John Hasler . +.SH "SEE ALSO" +.BR pppd (8), +.BR chat (8), +.BR tail (1). + -- cgit v1.2.3