From ff73676914146bced1e9c9468d8ad91255125016 Mon Sep 17 00:00:00 2001 From: Danilo Godec Date: Wed, 10 Aug 2011 14:30:14 +0200 Subject: testing/pptpd: new aport pptpd is a linux PPTP server --- testing/pptpd/pptpd.conf | 88 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 testing/pptpd/pptpd.conf (limited to 'testing/pptpd/pptpd.conf') diff --git a/testing/pptpd/pptpd.conf b/testing/pptpd/pptpd.conf new file mode 100644 index 000000000..258f5d5cc --- /dev/null +++ b/testing/pptpd/pptpd.conf @@ -0,0 +1,88 @@ +################################################################################ +# +# Sample PoPToP configuration file +# +# for PoPToP version 1.0.0 +# +################################################################################ + +# TAG: speed +# +# Specifies the speed for the PPP daemon to talk at. +# Some PPP daemons will ignore this value. +# +speed 115200 + +# TAG: option +# +# Specifies the location of the PPP options file. +# By default PPP looks in '/etc/ppp/options' +# +#option /this/is/the/options/file +option /etc/ppp/options.pptp + +# TAG: debug +# +# Turns on (more) debugging to syslog. +# +debug + +# TAG: localip +# TAG: remoteip +# +# Specifies the local and remote IP address ranges. +# +# You can specify single IP addresses seperated by commas or you can +# specify ranges, or both. For example: +# +# 192.168.0.234,192.168.0.245-249,192.168.0.254 +# +# IMPORTANT RESTRICTIONS: +# +# 1. No spaces are permitted between commas or within addresses. +# +# 2. If you give more IP addresses than MAX_CONNECTIONS, it will +# start at the beginning of the list and go until it gets +# MAX_CONNECTIONS IPs. Others will be ignored. +# +# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238, +# you must type 234-238 if you mean this. +# +# 4. If you give a single localIP, that's ok - all local IPs will +# be set to the given one. You MUST still give at least one remote +# IP for each simultaneous client. +# +#localip 192.168.0.234-238,192.168.0.245 +#remoteip 192.168.1.234-238,192.168.1.245 + +localip 192.168.0.1 +remoteip 192.168.1.100-199 + +# TAG: ipxnets +# +# This gives the range of IPX networks to allocate to clients. By +# default IPX network number allocation is not handled internally. +# By putting a low and high network number here a pool of IPX networks +# can be defined. If this is done then there must be one IPX network +# per client. +# +# The format is a pair of hex numbers without any 0x prefix separated +# by a hyphen. +# +#ipxnets 00001000-00001FFF + +# TAG: listen +# +# Defines the IP address of the local interface on which pptpd +# should listen for connections. The default is to listen on all +# local interfaces (even ones brought up by pptp connections, thus +# permitting pptp tunnels inside the pptp tunnels). +# +#listen 192.168.0.1 + +# TAG: pidfile +# +# This defines the file name in which pptpd should store its process +# ID (or pid). The default is /var/run/pptpd.pid. +# +pidfile /var/run/pptpd.pid -- cgit v1.2.3