main/mansh: remove

i was asked to remove it not to move it...

3 files changed, 0 insertions, 427 deletions

diff --git a/main/mansh/APKBUILD b/main/mansh/APKBUILD
deleted file mode 100644
index 29617bbf7f..0000000000
--- a/main/mansh/APKBUILD
+++ /dev/null
@@ -1,46 +0,0 @@
-# Contributor: blinkkin <blink@bojary.koba.pl>
-# Maintainer:
-
-pkgname=mansh
-pkgver=20110604
-pkgrel=0
-pkgdesc="man, whatis and apropos written in shell"
-url="http://svnweb.freebsd.org/base/head/usr.bin/man/"
-arch="noarch"
-license="BSD"
-depends=
-depends_dev=
-makedepends="cvs"
-install="$pkgname.post-install"
-subpackages="$pkgname-doc"
-source="http://dev.alpinelinux.org/~ncopa/mansh-$pkgver.tar.bz2
-	mdocml-support.patch"
-
-_builddir="$srcdir"/$pkgname
-mksource() {
-	mkdir /tmp/${pkgname}-${pkgver}
-	(cd /tmp/${pkgname}-${pkgver};
-	cvs -d :pserver:anoncvs@anoncvs.tw.FreeBSD.org:/home/ncvs checkout -D $pkgver -d $pkgname src/usr.bin/man/
-	rm -rf /tmp/${pkgname}-${pkgver}/$pkgname/CVS
-	tar cjf /tmp/${pkgname}-${pkgver}/${pkgname}-${pkgver}.tar.bz2 mansh/)
-}
-
-prepare() {
-	cd "$_builddir"
-	for i in "$srcdir"/*.patch; do
-		msg "Applying ${i}"
-		patch -p0 -i $i || return 1
-	done
-}
-
-package() {
-	cd "$_builddir"
-	install -Dm 755 man.sh "$pkgdir"/usr/libexec/man.sh
-	for i in *.1; do
-		install -Dm 644 $i "$pkgdir"/usr/share/man/man1/$i
-	done
-	install -Dm 644 man.conf.5 "$pkgdir"/usr/share/man/man5/man.conf.5 || return 1
-}
-
-md5sums="0e25b2e02febf224709f4e2fabb12d6a  mansh-20110604.tar.bz2
-f805bbd10a20d1f2c9aa318e83186ecf  mdocml-support.patch"
diff --git a/main/mansh/mansh.post-install b/main/mansh/mansh.post-install
deleted file mode 100644
index 45f2f8bb65..0000000000
--- a/main/mansh/mansh.post-install
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-ln -s /usr/libexec/man.sh /usr/bin/man
-ln -s /usr/libexec/man.sh /usr/bin/apropos
-ln -s /usr/libexec/man.sh /usr/bin/whatis
-ln -s /usr/libexec/man.sh /usr/bin/manpath
diff --git a/main/mansh/mdocml-support.patch b/main/mansh/mdocml-support.patch
deleted file mode 100644
index 3ee6675497..0000000000
--- a/main/mansh/mdocml-support.patch
+++ /dev/null
@@ -1,375 +0,0 @@
---- man.orig
-+++ man.sh
-@@ -88,45 +88,13 @@
- 	decho "Using manual path: $MANPATH"
- }
- 
--# Usage: check_cat catglob
--# Checks to see if a cat glob is available.
--check_cat() {
--	if exists "$1"; then
--		use_cat=yes
--		catpage=$found
--		setup_cattool $catpage
--		decho "    Found catpage $catpage"
--		return 0
--	else
--		return 1
--	fi
--}
--
- # Usage: check_man manglob catglob
- # Given 2 globs, figures out if the manglob is available, if so, check to
- # see if the catglob is also available and up to date.
- check_man() {
- 	if exists "$1"; then
--		# We have a match, check for a cat page
- 		manpage=$found
--		setup_cattool $manpage
- 		decho "    Found manpage $manpage"
--
--		if [ -n "${use_width}" ]; then
--			# non-standard width
--			unset use_cat
--			decho "    Skipping catpage: non-standard page width"
--		elif exists "$2" && is_newer $found $manpage; then
--			# cat page found and is newer, use that
--			use_cat=yes
--			catpage=$found
--			setup_cattool $catpage
--			decho "    Using catpage $catpage"
--		else
--			# no cat page or is older
--			unset use_cat
--			decho "    Skipping catpage: not found or old"
--		fi
- 		return 0
- 	fi
- 
-@@ -167,13 +135,11 @@
- # Returns: true if something is matched and found.
- # Search the given path/section combo for a given page.
- find_file() {
--	local manroot catroot mann man0 catn cat0
-+	local manroot mann man0
- 
- 	manroot="$1/man$2"
--	catroot="$1/cat$2"
- 	if [ -n "$3" ]; then
- 		manroot="$manroot/$3"
--		catroot="$catroot/$3"
- 	fi
- 
- 	if [ ! -d "$manroot" ]; then
-@@ -183,19 +149,13 @@
- 
- 	mann="$manroot/$4.$2*"
- 	man0="$manroot/$4.0*"
--	catn="$catroot/$4.$2*"
--	cat0="$catroot/$4.0*"
- 
- 	# This is the behavior as seen by the original man utility.
- 	# Let's not change that which doesn't seem broken.
--	if check_man "$mann" "$catn"; then
-+	if check_man "$mann"; then
- 		return 0
--	elif check_man "$man0" "$cat0"; then
-+	elif check_man "$man0"; then
- 		return 0
--	elif check_cat "$catn"; then
--		return 0
--	elif check_cat "$cat0"; then
--		return 0
- 	fi
- 
- 	return 1
-@@ -279,31 +239,13 @@
- # Usage: man_display_page
- # Display either the manpage or catpage depending on the use_cat variable
- man_display_page() {
--	local EQN NROFF PIC TBL TROFF REFER VGRIND
--	local IFS l nroff_dev pipeline preproc_arg tool
-+	local NROFF
-+	local IFS l pipeline preproc_arg tool
- 
- 	# We are called with IFS set to colon. This causes really weird
- 	# things to happen for the variables that have spaces in them.
- 	unset IFS
- 
--	# If we are supposed to use a catpage and we aren't using troff(1)
--	# just zcat the catpage and we are done.
--	if [ -z "$tflag" -a -n "$use_cat" ]; then
--		if [ -n "$wflag" ]; then
--			echo "$catpage (source: $manpage)"
--			ret=0
--		else
--			if [ $debug -gt 0 ]; then
--				decho "Command: $cattool $catpage | $MANPAGER"
--				ret=0
--			else
--				eval "$cattool $catpage | $MANPAGER"
--				ret=$?
--			fi
--		fi
--		return
--	fi
--
- 	# Okay, we are using the manpage, do we just need to output the
- 	# name of the manpage?
- 	if [ -n "$wflag" ]; then
-@@ -312,88 +254,17 @@
- 		return
- 	fi
- 
--	# So, we really do need to parse the manpage. First, figure out the
--	# device flag (-T) we have to pass to eqn(1) and groff(1). Then,
--	# setup the pipeline of commands based on the user's request.
-+	NROFF="$NROFF -Tutf8"
- 
--	# If the manpage is from a particular charset, we need to setup nroff
--	# to properly output for the correct device.
--	case "${manpage}" in
--	*.${man_charset}/*)
--		# I don't pretend to know this; I'm just copying from the
--		# previous version of man(1).
--		case "$man_charset" in
--		KOI8-R)		nroff_dev="koi8-r" ;;
--		ISO8859-1)	nroff_dev="latin1" ;;
--		ISO8859-15)	nroff_dev="latin1" ;;
--		UTF-8)		nroff_dev="utf8" ;;
--		*)		nroff_dev="ascii" ;;
--		esac
--
--		NROFF="$NROFF -T$nroff_dev"
--		EQN="$EQN -T$nroff_dev"
--
--		# Iff the manpage is from the locale and not just the charset,
--		# then we need to define the locale string.
--		case "${manpage}" in
--		*/${man_lang}_${man_country}.${man_charset}/*)
--			NROFF="$NROFF -dlocale=$man_lang.$man_charset"
--			;;
--		*/${man_lang}.${man_charset}/*)
--			NROFF="$NROFF -dlocale=$man_lang.$man_charset"
--			;;
--		esac
--
--		# Allow language specific calls to override the default
--		# set of utilities.
--		l=$(echo $man_lang | tr [:lower:] [:upper:])
--		for tool in EQN NROFF PIC TBL TROFF REFER VGRIND; do
--			eval "$tool=\${${tool}_$l:-\$$tool}"
--		done
--		;;
--	*)	NROFF="$NROFF -Tascii"
--		EQN="$EQN -Tascii"
--		;;
--	esac
--
--	if [ -z "$MANCOLOR" ]; then
--		NROFF="$NROFF -P-c"
--	fi
--
- 	if [ -n "${use_width}" ]; then
--		NROFF="$NROFF -rLL=${use_width}n -rLT=${use_width}n"
-+		NROFF="$NROFF -Owidth=${use_width}"
- 	fi
- 
--	if [ -n "$MANROFFSEQ" ]; then
--		set -- -$MANROFFSEQ
--		while getopts 'egprtv' preproc_arg; do
--			case "${preproc_arg}" in
--			e)	pipeline="$pipeline | $EQN" ;;
--			g)	;; # Ignore for compatability.
--			p)	pipeline="$pipeline | $PIC" ;;
--			r)	pipeline="$pipeline | $REFER" ;;
--			t)	pipeline="$pipeline | $TBL" ;;
--			v)	pipeline="$pipeline | $VGRIND" ;;
--			*)	usage ;;
--			esac
--		done
--		# Strip the leading " | " from the resulting pipeline.
--		pipeline="${pipeline#" | "}"
--	else
--		pipeline="$TBL"
--	fi
--
--	if [ -n "$tflag" ]; then
--		pipeline="$pipeline | $TROFF"
--	else
--		pipeline="$pipeline | $NROFF | $MANPAGER"
--	fi
--
- 	if [ $debug -gt 0 ]; then
--		decho "Command: $cattool $manpage | $pipeline"
-+		decho "Command: $NROFF $manpage | $MANPAGER"
- 		ret=0
- 	else
--		eval "$cattool $manpage | $pipeline"
-+		eval "$NROFF $manpage | $MANPAGER"
- 		ret=$?
- 	fi
- }
-@@ -408,9 +279,7 @@
- 	case "$1" in
- 	*/*)	if [ -f "$1" -a -r "$1" ]; then
- 			decho "Found a usable page, displaying that"
--			unset use_cat
- 			manpage="$1"
--			setup_cattool $manpage
- 			if man_check_for_so $manpage $(dirname $manpage); then
- 				found_page=yes
- 				man_display_page
-@@ -428,33 +297,6 @@
- 				p=$path/$locpath
- 				p=${p%/.} # Rid ourselves of the trailing /.
- 
--				# Check if there is a MACHINE specific manpath.
--				if find_file $p $sect $MACHINE "$1"; then
--					if man_check_for_so $manpage $p; then
--						found_page=yes
--						man_display_page
--						if [ -n "$aflag" ]; then
--							continue 2
--						else
--							return
--						fi
--					fi
--				fi
--
--				# Check if there is a MACHINE_ARCH
--				# specific manpath.
--				if find_file $p $sect $MACHINE_ARCH "$1"; then
--					if man_check_for_so $manpage $p; then
--						found_page=yes
--						man_display_page
--						if [ -n "$aflag" ]; then
--							continue 2
--						else
--							return
--						fi
--					fi
--				fi
--
- 				# Check plain old manpath.
- 				if find_file $p $sect '' "$1"; then
- 					if man_check_for_so $manpage $p; then
-@@ -544,19 +386,6 @@
- # Usage: man_setup
- # Setup various trivial but essential variables.
- man_setup() {
--	# Setup machine and architecture variables.
--	if [ -n "$mflag" ]; then
--		MACHINE_ARCH=${mflag%%:*}
--		MACHINE=${mflag##*:}
--	fi
--	if [ -z "$MACHINE_ARCH" ]; then
--		MACHINE_ARCH=$($SYSCTL -n hw.machine_arch)
--	fi
--	if [ -z "$MACHINE" ]; then
--		MACHINE=$($SYSCTL -n hw.machine)
--	fi
--	decho "Using architecture: $MACHINE_ARCH:$MACHINE"
--
- 	setup_pager
- 
- 	# Setup manual sections to search.
-@@ -582,14 +411,6 @@
- 			use_width=$MANWIDTH
- 		fi
- 		;;
--	[Tt][Tt][Yy])
--		if { sizes=$($STTY size 0>&3 2>/dev/null); } 3>&1; then
--			set -- $sizes
--			if [ $2 -gt 80 ]; then
--				use_width=$(($2-2))
--			fi
--		fi
--		;;
- 	esac
- 	if [ -n "$use_width" ]; then
- 		decho "Using non-standard page width: ${use_width}"
-@@ -601,38 +422,8 @@
- # Usage: man_setup_locale
- # Setup necessary locale variables.
- man_setup_locale() {
--	local lang_cc
- 
- 	locpaths='.'
--	man_charset='US-ASCII'
--
--	# Setup locale information.
--	if [ -n "$oflag" ]; then
--		decho 'Using non-localized manpages'
--	else
--		# Use the locale tool to give us the proper LC_CTYPE
--		eval $( $LOCALE )
--
--		case "$LC_CTYPE" in
--		C)		;;
--		POSIX)		;;
--		[a-z][a-z]_[A-Z][A-Z]\.*)
--				lang_cc="${LC_CTYPE%.*}"
--				man_lang="${LC_CTYPE%_*}"
--				man_country="${lang_cc#*_}"
--				man_charset="${LC_CTYPE#*.}"
--				locpaths="$LC_CTYPE"
--				locpaths="$locpaths:$man_lang.$man_charset"
--				if [ "$man_lang" != "en" ]; then
--					locpaths="$locpaths:en.$man_charset"
--				fi
--				locpaths="$locpaths:."
--				;;
--		*)		echo 'Unknown locale, assuming C' >&2
--				;;
--		esac
--	fi
--
- 	decho "Using locale paths: $locpaths"
- }
- 
-@@ -822,19 +613,6 @@
- 	exit $rval
- }
- 
--# Usage: setup_cattool page
--# Finds an appropriate decompressor based on extension
--setup_cattool() {
--	case "$1" in
--	*.bz)	cattool='/usr/bin/bzcat' ;;
--	*.bz2)	cattool='/usr/bin/bzcat' ;;
--	*.gz)	cattool='/usr/bin/zcat' ;;
--	*.lzma)	cattool='/usr/bin/lzcat' ;;
--	*.xz)	cattool='/usr/bin/xzcat' ;;
--	*)	cattool='/usr/bin/zcat -f' ;;
--	esac
--}
--
- # Usage: setup_pager
- # Correctly sets $MANPAGER
- setup_pager() {
-@@ -932,22 +710,12 @@
- }
- 
- # User's PATH setting decides on the groff-suite to pick up.
--EQN=eqn
--NROFF='groff -S -P-h -Wall -mtty-char -man'
--PIC=pic
--REFER=refer
--TBL=tbl
--TROFF='groff -S -man'
--VGRIND=vgrind
-+NROFF='mandoc'
- 
--LOCALE=/usr/bin/locale
--STTY=/bin/stty
--SYSCTL=/sbin/sysctl
--
- debug=0
- man_default_sections='1:1aout:8:2:3:n:4:5:6:7:9:l'
- man_default_path='/usr/share/man:/usr/share/openssl/man:/usr/local/man'
--cattool='/usr/bin/zcat -f'
-+cattool=/bin/cat
- 
- config_global='/etc/man.conf'
-