diff options
Diffstat (limited to 'main/gdb/50_all_gdb-pie-2.patch')
| -rw-r--r-- | main/gdb/50_all_gdb-pie-2.patch | 2122 |
1 files changed, 2122 insertions, 0 deletions
diff --git a/main/gdb/50_all_gdb-pie-2.patch b/main/gdb/50_all_gdb-pie-2.patch new file mode 100644 index 0000000000..946d055018 --- /dev/null +++ b/main/gdb/50_all_gdb-pie-2.patch @@ -0,0 +1,2122 @@ +Index: gdb-6.8/gdb/testsuite/configure +=================================================================== +--- gdb-6.8.orig/gdb/testsuite/configure 2007-12-29 06:01:30.000000000 -0800 ++++ gdb-6.8/gdb/testsuite/configure 2008-03-30 09:00:52.000000000 -0700 +@@ -3104,7 +3104,7 @@ + + + +- ac_config_files="$ac_config_files Makefile gdb.ada/Makefile gdb.arch/Makefile gdb.asm/Makefile gdb.base/Makefile gdb.cp/Makefile gdb.disasm/Makefile gdb.dwarf2/Makefile gdb.fortran/Makefile gdb.server/Makefile gdb.java/Makefile gdb.mi/Makefile gdb.modula2/Makefile gdb.objc/Makefile gdb.opt/Makefile gdb.pascal/Makefile gdb.threads/Makefile gdb.trace/Makefile gdb.xml/Makefile" ++ ac_config_files="$ac_config_files Makefile gdb.ada/Makefile gdb.arch/Makefile gdb.asm/Makefile gdb.base/Makefile gdb.cp/Makefile gdb.disasm/Makefile gdb.dwarf2/Makefile gdb.fortran/Makefile gdb.server/Makefile gdb.pie/Makefile gdb.java/Makefile gdb.mi/Makefile gdb.modula2/Makefile gdb.objc/Makefile gdb.opt/Makefile gdb.pascal/Makefile gdb.threads/Makefile gdb.trace/Makefile gdb.xml/Makefile" + cat >confcache <<\_ACEOF + # This file is a shell script that caches the results of configure + # tests run on this system so they can be shared between configure +@@ -3665,6 +3665,7 @@ + "gdb.dwarf2/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.dwarf2/Makefile" ;; + "gdb.fortran/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.fortran/Makefile" ;; + "gdb.server/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.server/Makefile" ;; ++ "gdb.pie/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.pie/Makefile" ;; + "gdb.java/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.java/Makefile" ;; + "gdb.mi/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.mi/Makefile" ;; + "gdb.modula2/Makefile" ) CONFIG_FILES="$CONFIG_FILES gdb.modula2/Makefile" ;; +Index: gdb-6.8/gdb/testsuite/configure.ac +=================================================================== +--- gdb-6.8.orig/gdb/testsuite/configure.ac 2007-10-25 13:30:26.000000000 -0700 ++++ gdb-6.8/gdb/testsuite/configure.ac 2008-03-30 09:00:22.000000000 -0700 +@@ -114,7 +114,7 @@ + gdb.ada/Makefile \ + gdb.arch/Makefile gdb.asm/Makefile gdb.base/Makefile \ + gdb.cp/Makefile gdb.disasm/Makefile gdb.dwarf2/Makefile \ +- gdb.fortran/Makefile gdb.server/Makefile \ ++ gdb.fortran/Makefile gdb.server/Makefile gdb.pie/Makefile \ + gdb.java/Makefile gdb.mi/Makefile gdb.modula2/Makefile \ + gdb.objc/Makefile gdb.opt/Makefile gdb.pascal/Makefile \ + gdb.threads/Makefile gdb.trace/Makefile gdb.xml/Makefile]) +Index: gdb-6.8/gdb/testsuite/gdb.pie/Makefile.in +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ gdb-6.8/gdb/testsuite/gdb.pie/Makefile.in 2008-03-30 08:59:12.000000000 -0700 +@@ -0,0 +1,19 @@ ++VPATH = @srcdir@ ++srcdir = @srcdir@ ++ ++EXECUTABLES = ++MISCELLANEOUS = arch.inc ++ ++all info install-info dvi install uninstall installcheck check: ++ @echo "Nothing to be done for $@..." ++ ++clean mostlyclean: ++ -rm -f *~ *.o a.out *.x *.ci *.tmp ++ -rm -f core core.coremaker coremaker.core corefile $(EXECUTABLES) ++ -rm -f $(MISCELLANEOUS) ++ ++distclean maintainer-clean realclean: clean ++ -rm -f *~ core ++ -rm -f Makefile config.status config.log ++ -rm -f *-init.exp ++ -rm -fr *.log summary detail *.plog *.sum *.psum site.* +Index: gdb-6.8/gdb/testsuite/gdb.pie/attach.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ gdb-6.8/gdb/testsuite/gdb.pie/attach.c 2008-03-30 08:59:12.000000000 -0700 +@@ -0,0 +1,20 @@ ++/* This program is intended to be started outside of gdb, and then ++ attached to by gdb. Thus, it simply spins in a loop. The loop ++ is exited when & if the variable 'should_exit' is non-zero. (It ++ is initialized to zero in this program, so the loop will never ++ exit unless/until gdb sets the variable to non-zero.) ++ */ ++#include <stdio.h> ++ ++int should_exit = 0; ++ ++int main () ++{ ++ int local_i = 0; ++ ++ while (! should_exit) ++ { ++ local_i++; ++ } ++ return 0; ++} +Index: gdb-6.8/gdb/testsuite/gdb.pie/attach.exp +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ gdb-6.8/gdb/testsuite/gdb.pie/attach.exp 2008-03-30 08:59:12.000000000 -0700 +@@ -0,0 +1,432 @@ ++# Copyright 1997, 1999, 2002 Free Software Foundation, Inc. ++ ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ ++ ++# Please email any bugs, comments, and/or additions to this file to: ++# bug-gdb@prep.ai.mit.edu ++ ++if $tracelevel then { ++ strace $tracelevel ++ } ++ ++set prms_id 0 ++set bug_id 0 ++ ++# On HP-UX 11.0, this test is causing a process running the program ++# "attach" to be left around spinning. Until we figure out why, I am ++# commenting out the test to avoid polluting tiamat (our 11.0 nightly ++# test machine) with these processes. RT ++# ++# Setting the magic bit in the target app should work. I added a ++# "kill", and also a test for the R3 register warning. JB ++if { [istarget "hppa*-*-hpux*"] } { ++ return 0 ++} ++ ++# are we on a target board ++if [is_remote target] then { ++ return 0 ++} ++ ++set testfile "attach" ++set srcfile ${testfile}.c ++set srcfile2 ${testfile}2.c ++set binfile ${objdir}/${subdir}/${testfile} ++set binfile2 ${objdir}/${subdir}/${testfile}2 ++set escapedbinfile [string_to_regexp ${objdir}/${subdir}/${testfile}] ++set cleanupfile ${objdir}/${subdir}/${testfile}.awk ++ ++#execute_anywhere "rm -f ${binfile} ${binfile2}" ++remote_exec build "rm -f ${binfile} ${binfile2}" ++# For debugging this test ++# ++#log_user 1 ++ ++# Clean out any old files from past runs. ++# ++remote_exec build "${cleanupfile}" ++ ++# build the first test case ++# ++if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug "additional_flags= -fpie -pie"}] != "" } { ++ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." ++} ++ ++# Build the in-system-call test ++ ++if { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug "additional_flags= -fpie -pie"}] != "" } { ++ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." ++} ++ ++if [get_compiler_info ${binfile}] { ++ return -1 ++} ++ ++proc do_attach_tests {} { ++ global gdb_prompt ++ global binfile ++ global escapedbinfile ++ global srcfile ++ global testfile ++ global objdir ++ global subdir ++ global timeout ++ ++ # Start the program running and then wait for a bit, to be sure ++ # that it can be attached to. ++ # ++ set testpid [eval exec $binfile &] ++ exec sleep 2 ++ ++ # Verify that we cannot attach to nonsense. ++ # ++ send_gdb "attach abc\n" ++ gdb_expect { ++ -re ".*Illegal process-id: abc.*$gdb_prompt $"\ ++ {pass "attach to nonsense is prohibited"} ++ -re "Attaching to.*, process .*couldn't open /proc file.*$gdb_prompt $"\ ++ { ++ # Response expected from /proc-based systems. ++ pass "attach to nonsense is prohibited" ++ } ++ -re "Attaching to.*$gdb_prompt $"\ ++ {fail "attach to nonsense is prohibited (bogus pid allowed)"} ++ -re "$gdb_prompt $" {fail "attach to nonsense is prohibited"} ++ timeout {fail "(timeout) attach to nonsense is prohibited"} ++ } ++ ++ # Verify that we cannot attach to what appears to be a valid ++ # process ID, but is a process that doesn't exist. Traditionally, ++ # most systems didn't have a process with ID 0, so we take that as ++ # the default. However, there are a few exceptions. ++ # ++ set boguspid 0 ++ if { [istarget "*-*-*bsd*"] } { ++ # In FreeBSD 5.0, PID 0 is used for "swapper". Use -1 instead ++ # (which should have the desired effect on any version of ++ # FreeBSD, and probably other *BSD's too). ++ set boguspid -1 ++ } ++ send_gdb "attach $boguspid\n" ++ gdb_expect { ++ -re "Attaching to.*, process $boguspid.*No such process.*$gdb_prompt $"\ ++ { ++ # Response expected on ptrace-based systems (i.e. HP-UX 10.20). ++ pass "attach to nonexistent process is prohibited" ++ } ++ -re "Attaching to.*, process $boguspid failed.*Hint.*$gdb_prompt $"\ ++ { ++ # Response expected on ttrace-based systems (i.e. HP-UX 11.0). ++ pass "attach to nonexistent process is prohibited" ++ } ++ -re "Attaching to.*, process $boguspid.*denied.*$gdb_prompt $"\ ++ {pass "attach to nonexistent process is prohibited"} ++ -re "Attaching to.*, process $boguspid.*not permitted.*$gdb_prompt $"\ ++ {pass "attach to nonexistent process is prohibited"} ++ -re "Attaching to.*, process .*couldn't open /proc file.*$gdb_prompt $"\ ++ { ++ # Response expected from /proc-based systems. ++ pass "attach to nonexistent process is prohibited" ++ } ++ -re "$gdb_prompt $" {fail "attach to nonexistent process is prohibited"} ++ timeout { ++ fail "(timeout) attach to nonexistent process is prohibited" ++ } ++ } ++ ++ # Verify that we can attach to the process by first giving its ++ # executable name via the file command, and using attach with ++ # the process ID. ++ # ++ # (Actually, the test system appears to do this automatically ++ # for us. So, we must also be prepared to be asked if we want ++ # to discard an existing set of symbols.) ++ # ++ send_gdb "file $binfile\n" ++ gdb_expect { ++ -re "Load new symbol table from.*y or n.*$" { ++ send_gdb "y\n" ++ gdb_expect { ++ -re "Reading symbols from $escapedbinfile\.\.\.*done.*$gdb_prompt $"\ ++ {pass "(re)set file, before attach1"} ++ -re "$gdb_prompt $" {fail "(re)set file, before attach1"} ++ timeout {fail "(timeout) (re)set file, before attach1"} ++ } ++ } ++ -re "Reading symbols from $escapedbinfile\.\.\.*done.*$gdb_prompt $"\ ++ {pass "set file, before attach1"} ++ -re "$gdb_prompt $" {fail "set file, before attach1"} ++ timeout {fail "(timeout) set file, before attach1"} ++ } ++ ++ send_gdb "attach $testpid\n" ++ gdb_expect { ++ -re "Attaching to program.*`?$escapedbinfile'?, process $testpid.*main.*at .*$srcfile:.*$gdb_prompt $"\ ++ {pass "attach1, after setting file"} ++ -re "$gdb_prompt $" {fail "attach1, after setting file"} ++ timeout {fail "(timeout) attach1, after setting file"} ++ } ++ ++ # Verify that we can "see" the variable "should_exit" in the ++ # program, and that it is zero. ++ # ++ send_gdb "print should_exit\n" ++ gdb_expect { ++ -re ".* = 0.*$gdb_prompt $"\ ++ {pass "after attach1, print should_exit"} ++ -re "$gdb_prompt $" {fail "after attach1, print should_exit"} ++ timeout {fail "(timeout) after attach1, print should_exit"} ++ } ++ ++ # Detach the process. ++ # ++ send_gdb "detach\n" ++ gdb_expect { ++ -re "Detaching from program: .*$escapedbinfile.*$gdb_prompt $"\ ++ {pass "attach1 detach"} ++ -re "$gdb_prompt $" {fail "attach1 detach"} ++ timeout {fail "(timeout) attach1 detach"} ++ } ++ ++ # Wait a bit for gdb to finish detaching ++ # ++ exec sleep 5 ++ ++ # Purge the symbols from gdb's brain. (We want to be certain ++ # the next attach, which won't be preceded by a "file" command, ++ # is really getting the executable file without our help.) ++ # ++ set old_timeout $timeout ++ set timeout 15 ++ send_gdb "file\n" ++ gdb_expect { ++ -re ".*gdb internal error.*$" { ++ fail "Internal error, prob. Memory corruption" ++ } ++ -re "No executable file now.*Discard symbol table.*y or n.*$" { ++ send_gdb "y\n" ++ gdb_expect { ++ -re "No symbol file now.*$gdb_prompt $"\ ++ {pass "attach1, purging symbols after detach"} ++ -re "$gdb_prompt $" {fail "attach1, purging symbols after detach"} ++ timeout {fail "(timeout) attach1, purging symbols after detach"} ++ } ++ } ++ -re "$gdb_prompt $" {fail "attach1, purging file after detach"} ++ timeout { ++ fail "(timeout) attach1, purging file after detach" ++ } ++ } ++ set timeout $old_timeout ++ ++ # Verify that we can attach to the process just by giving the ++ # process ID. ++ # ++ send_gdb "attach $testpid\n" ++ gdb_expect { ++ -re "Attaching to process $testpid.*Reading symbols from $escapedbinfile.*main.*at .*$gdb_prompt $"\ ++ {pass "attach2"} ++ -re "$gdb_prompt $" {fail "attach2"} ++ timeout {fail "(timeout) attach2"} ++ } ++ ++ # Verify that we can modify the variable "should_exit" in the ++ # program. ++ # ++ send_gdb "set should_exit=1\n" ++ gdb_expect { ++ -re "$gdb_prompt $" {pass "after attach2, set should_exit"} ++ timeout {fail "(timeout) after attach2, set should_exit"} ++ } ++ ++ # Verify that the modification really happened. ++ # ++ send_gdb "tbreak 19\n" ++ gdb_expect { ++ -re "Breakpoint .*at.*$srcfile, line 19.*$gdb_prompt $"\ ++ {pass "after attach2, set tbreak postloop"} ++ -re "$gdb_prompt $" {fail "after attach2, set tbreak postloop"} ++ timeout {fail "(timeout) after attach2, set tbreak postloop"} ++ } ++ send_gdb "continue\n" ++ gdb_expect { ++ -re "main.*at.*$srcfile:19.*$gdb_prompt $"\ ++ {pass "after attach2, reach tbreak postloop"} ++ -re "$gdb_prompt $" {fail "after attach2, reach tbreak postloop"} ++ timeout {fail "(timeout) after attach2, reach tbreak postloop"} ++ } ++ ++ # Allow the test process to exit, to cleanup after ourselves. ++ # ++ send_gdb "continue\n" ++ gdb_expect { ++ -re "Program exited normally.*$gdb_prompt $"\ ++ {pass "after attach2, exit"} ++ -re "$gdb_prompt $" {fail "after attach2, exit"} ++ timeout {fail "(timeout) after attach2, exit"} ++ } ++ ++ # Make sure we don't leave a process around to confuse ++ # the next test run (and prevent the compile by keeping ++ # the text file busy), in case the "set should_exit" didn't ++ # work. ++ # ++ remote_exec build "kill -9 ${testpid}" ++ # Start the program running and then wait for a bit, to be sure ++ # that it can be attached to. ++ # ++ set testpid [eval exec $binfile &] ++ exec sleep 2 ++ ++ # Verify that we can attach to the process, and find its a.out ++ # when we're cd'd to some directory that doesn't contain the ++ # a.out. (We use the source path set by the "dir" command.) ++ # ++ send_gdb "dir ${objdir}/${subdir}\n" ++ gdb_expect { ++ -re ".*Source directories searched: .*$gdb_prompt $"\ ++ {pass "set source path"} ++ -re "$gdb_prompt $" {fail "set source path"} ++ timeout {fail "(timeout) set source path"} ++ } ++ ++ send_gdb "cd /tmp\n" ++ gdb_expect { ++ -re ".*Working directory /tmp.*$gdb_prompt $"\ ++ {pass "cd away from process' a.out"} ++ -re "$gdb_prompt $" {fail "cd away from process' a.out"} ++ timeout {fail "(timeout) cd away from process' a.out"} ++ } ++ ++ # Explicitly flush out any knowledge of the previous attachment. ++ send_gdb "symbol\n" ++ gdb_expect { ++ -re ".*Discard symbol table from.*y or n. $"\ ++ {send_gdb "y\n" ++ gdb_expect { ++ -re ".*No symbol file now.*$gdb_prompt $"\ ++ {pass "before attach3, flush symbols"} ++ -re "$gdb_prompt $" {fail "before attach3, flush symbols"} ++ timeout {fail "(timeout) before attach3, flush symbols"} ++ } ++ } ++ -re ".*No symbol file now.*$gdb_prompt $"\ ++ {pass "before attach3, flush symbols"} ++ -re "$gdb_prompt $" {fail "before attach3, flush symbols"} ++ timeout {fail "(timeout) before attach3, flush symbols"} ++ } ++ send_gdb "exec\n" ++ gdb_expect { ++ -re ".*No executable file now.*$gdb_prompt $"\ ++ {pass "before attach3, flush exec"} ++ -re "$gdb_prompt $" {fail "before attach3, flush exec"} ++ timeout {fail "(timeout) before attach3, flush exec"} ++ } ++ ++ send_gdb "attach $testpid\n" ++ gdb_expect { ++ -re "Attaching to process $testpid.*Reading symbols from $escapedbinfile.*main.*at .*$gdb_prompt $"\ ++ {pass "attach when process' a.out not in cwd"} ++ -re "$gdb_prompt $" {fail "attach when process' a.out not in cwd"} ++ timeout {fail "(timeout) attach when process' a.out not in cwd"} ++ } ++ ++ send_gdb "kill\n" ++ gdb_expect { ++ -re ".*Kill the program being debugged.*y or n. $"\ ++ {send_gdb "y\n" ++ gdb_expect { ++ -re "$gdb_prompt $" {pass "after attach3, exit"} ++ timeout {fail "(timeout) after attach3, exit"} ++ } ++ } ++ -re "$gdb_prompt $" {fail "after attach3, exit"} ++ timeout {fail "(timeout) after attach3, exit"} ++ } ++ ++ # Another "don't leave a process around" ++ remote_exec build "kill -9 ${testpid}" ++} ++ ++proc do_call_attach_tests {} { ++ global gdb_prompt ++ global binfile2 ++ ++ # Start the program running and then wait for a bit, to be sure ++ # that it can be attached to. ++ # ++ set testpid [eval exec $binfile2 &] ++ exec sleep 2 ++ ++ # Attach ++ # ++ gdb_test "file $binfile2" ".*" "force switch to gdb64, if necessary" ++ send_gdb "attach $testpid\n" ++ gdb_expect { ++ -re ".*warning: reading register.*I.*O error.*$gdb_prompt $" { ++ fail "attach call, read register 3 error" ++ } ++ -re "Attaching to.*process $testpid.*libc.*$gdb_prompt $" { ++ pass "attach call" ++ } ++ -re "$gdb_prompt $" {fail "attach call"} ++ timeout {fail "(timeout) attach call"} ++ } ++ ++ # See if other registers are problems ++ # ++ send_gdb "i r r3\n" ++ gdb_expect { ++ -re ".*warning: reading register.*$gdb_prompt $" { ++ pass "CHFts23490: known bug" ++ } ++ -re ".*r3.*$gdb_prompt $" { ++ pass "Bug fixed, Yayyy!" ++ } ++ timeout { fail "timeout on info reg" } ++ } ++ ++ # Get rid of the process ++ # ++ gdb_test "p should_exit = 1" ".*" ++ gdb_test "c" ".*Program exited normally.*" ++ ++ # Be paranoid ++ # ++ remote_exec build "kill -9 ${testpid}" ++ ++} ++ ++ ++# Start with a fresh gdb ++# ++gdb_exit ++gdb_start ++gdb_reinitialize_dir $srcdir/$subdir ++gdb_load ${binfile} ++ ++# This is a test of gdb's ability to attach to a running process. ++# ++do_attach_tests ++ ++# Test attaching when the target is inside a system call ++# ++gdb_exit ++gdb_start ++ ++gdb_reinitialize_dir $srcdir/$subdir ++do_call_attach_tests ++ ++return 0 +Index: gdb-6.8/gdb/testsuite/gdb.pie/attach2.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ gdb-6.8/gdb/testsuite/gdb.pie/attach2.c 2008-03-30 08:59:12.000000000 -0700 +@@ -0,0 +1,24 @@ ++/* This program is intended to be started outside of gdb, and then ++ attached to by gdb. Thus, it simply spins in a loop. The loop ++ is exited when & if the variable 'should_exit' is non-zero. (It ++ is initialized to zero in this program, so the loop will never ++ exit unless/until gdb sets the variable to non-zero.) ++ */ ++#include <stdio.h> ++#include <stdlib.h> ++#include <unistd.h> ++ ++int should_exit = 0; ++ ++int main () ++{ ++ int local_i = 0; ++ ++ sleep( 10 ); /* System call causes register fetch to fail */ ++ /* This is a known HPUX "feature" */ ++ while (! should_exit) ++ { ++ local_i++; ++ } ++ return (0); ++} +Index: gdb-6.8/gdb/testsuite/gdb.pie/break.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ gdb-6.8/gdb/testsuite/gdb.pie/break.c 2008-03-30 08:59:12.000000000 -0700 +@@ -0,0 +1,146 @@ ++/* This testcase is part of GDB, the GNU debugger. ++ ++ Copyright 1992, 1993, 1994, 1995, 1999, 2002, 2003 Free Software ++ Foundation, Inc. ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the Free Software ++ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ ++ Please email any bugs, comments, and/or additions to this file to: ++ bug-gdb@prep.ai.mit.edu */ ++ ++#ifdef vxworks ++ ++# include <stdio.h> ++ ++/* VxWorks does not supply atoi. */ ++static int ++atoi (z) ++ char *z; ++{ ++ int i = 0; ++ ++ while (*z >= '0' && *z <= '9') ++ i = i * 10 + (*z++ - '0'); ++ return i; ++} ++ ++/* I don't know of any way to pass an array to VxWorks. This function ++ can be called directly from gdb. */ ++ ++vxmain (arg) ++char *arg; ++{ ++ char *argv[2]; ++ ++ argv[0] = ""; ++ argv[1] = arg; ++ main (2, argv, (char **) 0); ++} ++ ++#else /* ! vxworks */ ++# include <stdio.h> ++# include <stdlib.h> ++#endif /* ! vxworks */ ++ ++#ifdef PROTOTYPES ++extern int marker1 (void); ++extern int marker2 (int a); ++extern void marker3 (char *a, char *b); ++extern void marker4 (long d); ++#else ++extern int marker1 (); ++extern int marker2 (); ++extern void marker3 (); ++extern void marker4 (); ++#endif ++ ++/* ++ * This simple classical example of recursion is useful for ++ * testing stack backtraces and such. ++ */ ++ ++#ifdef PROTOTYPES ++int factorial(int); ++ ++int ++main (int argc, char **argv, char **envp) ++#else ++int ++main (argc, argv, envp) ++int argc; ++char *argv[], **envp; ++#endif ++{ ++#ifdef usestubs ++ set_debug_traps(); /* set breakpoint 5 here */ ++ breakpoint(); ++#endif ++ if (argc == 12345) { /* an unlikely value < 2^16, in case uninited */ /* set breakpoint 6 here */ ++ fprintf (stderr, "usage: factorial <number>\n"); ++ return 1; ++ } ++ printf ("%d\n", factorial (atoi ("6"))); /* set breakpoint 1 here */ ++ /* set breakpoint 12 here */ ++ marker1 (); /* set breakpoint 11 here */ ++ marker2 (43); /* set breakpoint 20 here */ ++ marker3 ("stack", "trace"); /* set breakpoint 21 here */ ++ marker4 (177601976L); ++ argc = (argc == 12345); /* This is silly, but we can step off of it */ /* set breakpoint 2 here */ ++ return argc; /* set breakpoint 10 here */ ++} ++ ++#ifdef PROTOTYPES ++int factorial (int value) ++#else ++int factorial (value) ++int value; ++#endif ++{ ++ if (value > 1) { /* set breakpoint 7 here */ ++ value *= factorial (value - 1); ++ } ++ return (value); /* set breakpoint 19 here */ ++} ++ ++#ifdef PROTOTYPES ++int multi_line_if_conditional (int a, int b, int c) ++#else ++int multi_line_if_conditional (a, b, c) ++ int a, b, c; ++#endif ++{ ++ if (a /* set breakpoint 3 here */ ++ && b ++ && c) ++ return 0; ++ else ++ return 1; ++} ++ ++#ifdef PROTOTYPES ++int multi_line_while_conditional (int a, int b, int c) ++#else ++int multi_line_while_conditional (a, b, c) ++ int a, b, c; ++#endif ++{ ++ while (a /* set breakpoint 4 here */ ++ && b ++ && c) ++ { ++ a--, b--, c--; ++ } ++ return 0; ++} +Index: gdb-6.8/gdb/testsuite/gdb.pie/break.exp +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ gdb-6.8/gdb/testsuite/gdb.pie/break.exp 2008-03-30 08:59:12.000000000 -0700 +@@ -0,0 +1,973 @@ ++# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, ++# 2000, 2002, 2003, 2004 ++# Free Software Foundation, Inc. ++ ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ ++# Please email any bugs, comments, and/or additions to this file to: ++# bug-gdb@prep.ai.mit.edu ++ ++# This file was written by Rob Savoye. (rob@cygnus.com) ++ ++# Test the same stuff but with PIE executables ++ ++if $tracelevel then { ++ strace $tracelevel ++} ++ ++ ++# ++# test running programs ++# ++set prms_id 0 ++set bug_id 0 ++ ++set testfile "break" ++set srcfile ${testfile}.c ++set srcfile1 ${testfile}1.c ++set binfile ${objdir}/${subdir}/${testfile} ++ ++if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}0.o" object {debug "additional_flags=-w -fpie -pie"}] != "" } { ++ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." ++} ++ ++if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile}1.o" object {debug "additional_flags=-w -fpie -pie"}] != "" } { ++ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." ++} ++ ++if { [gdb_compile "${binfile}0.o ${binfile}1.o" "${binfile}" executable {debug "additional_flags=-w -fpie -pie"}] != "" } { ++ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." ++} ++ ++if [get_compiler_info ${binfile}] { ++ return -1 ++} ++ ++gdb_exit ++gdb_start ++gdb_reinitialize_dir $srcdir/$subdir ++gdb_load ${binfile} ++ ++if [target_info exists gdb_stub] { ++ gdb_step_for_stub; ++} ++# ++# test simple breakpoint setting commands ++# ++ ++# Test deleting all breakpoints when there are none installed, ++# GDB should not prompt for confirmation. ++# Note that gdb-init.exp provides a "delete_breakpoints" proc ++# for general use elsewhere. ++ ++send_gdb "delete breakpoints\n" ++gdb_expect { ++ -re "Delete all breakpoints.*$" { ++ send_gdb "y\n" ++ gdb_expect { ++ -re "$gdb_prompt $" { ++ fail "Delete all breakpoints when none (unexpected prompt)" ++ } ++ timeout { fail "Delete all breakpoints when none (timeout after unexpected prompt)" } ++ } ++ } ++ -re ".*$gdb_prompt $" { pass "Delete all breakpoints when none" } ++ timeout { fail "Delete all breakpoints when none (timeout)" } ++} ++ ++# ++# test break at function ++# ++gdb_test "break main" \ ++ "Breakpoint.*at.* file .*$srcfile, line.*" \ ++ "breakpoint function" ++ ++# ++# test break at quoted function ++# ++gdb_test "break \"marker2\"" \ ++ "Breakpoint.*at.* file .*$srcfile1, line.*" \ ++ "breakpoint quoted function" ++ ++# ++# test break at function in file ++# ++gdb_test "break $srcfile:factorial" \ ++ "Breakpoint.*at.* file .*$srcfile, line.*" \ ++ "breakpoint function in file" ++ ++set bp_location1 [gdb_get_line_number "set breakpoint 1 here"] ++ ++# ++# test break at line number ++# ++# Note that the default source file is the last one whose source text ++# was printed. For native debugging, before we've executed the ++# program, this is the file containing main, but for remote debugging, ++# it's wherever the processor was stopped when we connected to the ++# board. So, to be sure, we do a list command. ++# ++gdb_test "list main" \ ++ ".*main \\(argc, argv, envp\\).*" \ ++ "use `list' to establish default source file" ++gdb_test "break $bp_location1" \ ++ "Breakpoint.*at.* file .*$srcfile, line $bp_location1\\." \ ++ "breakpoint line number" ++ ++# ++# test duplicate breakpoint ++# ++gdb_test "break $bp_location1" \ ++ "Note: breakpoint \[0-9\]+ also set at pc.*Breakpoint \[0-9\]+ at.* file .*$srcfile, line $bp_location1\\." \ ++ "breakpoint duplicate" ++ ++set bp_location2 [gdb_get_line_number "set breakpoint 2 here"] ++ ++# ++# test break at line number in file ++# ++gdb_test "break $srcfile:$bp_location2" \ ++ "Breakpoint.*at.* file .*$srcfile, line $bp_location2\\." \ ++ "breakpoint line number in file" ++ ++set bp_location3 [gdb_get_line_number "set breakpoint 3 here"] ++set bp_location4 [gdb_get_line_number "set breakpoint 4 here"] ++ ++# ++# Test putting a break at the start of a multi-line if conditional. ++# Verify the breakpoint was put at the start of the conditional. ++# ++gdb_test "break multi_line_if_conditional" \ ++ "Breakpoint.*at.* file .*$srcfile, line $bp_location3\\." \ ++ "breakpoint at start of multi line if conditional" ++ ++gdb_test "break multi_line_while_conditional" \ ++ "Breakpoint.*at.* file .*$srcfile, line $bp_location4\\." \ ++ "breakpoint at start of multi line while conditional" ++ ++set bp_location5 [gdb_get_line_number "set breakpoint 5 here"] ++set bp_location6 [gdb_get_line_number "set breakpoint 6 here"] ++ ++# ++# check to see what breakpoints are set ++# ++if [target_info exists gdb_stub] { ++ set main_line $bp_location5 ++} else { ++ set main_line $bp_location6 ++} ++ ++if {$hp_aCC_compiler} { ++ set proto "\\(int\\)" ++} else { ++ set proto "" ++} ++ ++set bp_location7 [gdb_get_line_number "set breakpoint 7 here"] ++set bp_location8 [gdb_get_line_number "set breakpoint 8 here" $srcfile1] ++set bp_location9 [gdb_get_line_number "set breakpoint 9 here" $srcfile1] ++ ++gdb_test "info break" \ ++ "Num Type\[ \]+Disp Enb Address\[ \]+What.* ++\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$main_line.* ++\[0-9\]+\[\t \]+breakpoint keep y.* in marker2 at .*$srcfile1:($bp_location8|$bp_location9).* ++\[0-9\]+\[\t \]+breakpoint keep y.* in factorial$proto at .*$srcfile:$bp_location7.* ++\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.* ++\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.* ++\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location2.* ++\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_if_conditional at .*$srcfile:$bp_location3.* ++\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_while_conditional at .*$srcfile:$bp_location4" \ ++ "breakpoint info" ++ ++# FIXME: The rest of this test doesn't work with anything that can't ++# handle arguments. ++# Huh? There doesn't *appear* to be anything that passes arguments ++# below. ++if [istarget "mips-idt-*"] then { ++ return ++} ++ ++# ++# run until the breakpoint at main is hit. For non-stubs-using targets. ++# ++if ![target_info exists use_gdb_stub] { ++ if [istarget "*-*-vxworks*"] then { ++ send_gdb "run vxmain \"2\"\n" ++ set timeout 120 ++ verbose "Timeout is now $timeout seconds" 2 ++ } else { ++ send_gdb "run\n" ++ } ++ gdb_expect { ++ -re "The program .* has been started already.*y or n. $" { ++ send_gdb "y\n" ++ exp_continue ++ } ++ -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $"\ ++ { pass "run until function breakpoint" } ++ -re ".*$gdb_prompt $" { fail "run until function breakpoint" } ++ timeout { fail "run until function breakpoint (timeout)" } ++ } ++} else { ++ if ![target_info exists gdb_stub] { ++ gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.*\{.*" "stub continue" ++ } ++} ++ ++# ++# run until the breakpoint at a line number ++# ++gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location1.*$bp_location1\[\t \]+printf.*factorial.*" \ ++ "run until breakpoint set at a line number" ++ ++# ++# Run until the breakpoint set in a function in a file ++# ++for {set i 6} {$i >= 1} {incr i -1} { ++ gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, factorial \\(value=$i\\) at .*$srcfile:$bp_location7.*$bp_location7\[\t \]+.*if .value > 1. \{.*" \ ++ "run until file:function($i) breakpoint" ++} ++ ++# ++# Run until the breakpoint set at a quoted function ++# ++gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile1:($bp_location8|$bp_location9).*" \ ++ "run until quoted breakpoint" ++# ++# run until the file:function breakpoint at a line number in a file ++# ++gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location2.*$bp_location2\[\t \]+argc = \\(argc == 12345\\);.*" \ ++ "run until file:linenum breakpoint" ++ ++# Test break at offset +1 ++set bp_location10 [gdb_get_line_number "set breakpoint 10 here"] ++ ++gdb_test "break +1" \ ++ "Breakpoint.*at.* file .*$srcfile, line $bp_location10\\." \ ++ "breakpoint offset +1" ++ ++# Check to see if breakpoint is hit when stepped onto ++ ++gdb_test "step" \ ++ ".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10.*$bp_location10\[\t \]+return argc;.*breakpoint 10 here.*" \ ++ "step onto breakpoint" ++ ++# ++# delete all breakpoints so we can start over, course this can be a test too ++# ++delete_breakpoints ++ ++# ++# test temporary breakpoint at function ++# ++ ++gdb_test "tbreak main" "Breakpoint.*at.* file .*$srcfile, line.*" "Temporary breakpoint function" ++ ++# ++# test break at function in file ++# ++ ++gdb_test "tbreak $srcfile:factorial" "Breakpoint.*at.* file .*$srcfile, line.*" \ ++ "Temporary breakpoint function in file" ++ ++# ++# test break at line number ++# ++send_gdb "tbreak $bp_location1\n" ++gdb_expect { ++ -re "Breakpoint.*at.* file .*$srcfile, line $bp_location1.*$gdb_prompt $" { pass "Temporary breakpoint line number #1" } ++ -re ".*$gdb_prompt $" { pass "Temporary breakpoint line number #1" } ++ timeout { fail "breakpoint line number #1 (timeout)" } ++} ++ ++gdb_test "tbreak $bp_location6" "Breakpoint.*at.* file .*$srcfile, line $bp_location6.*" "Temporary breakpoint line number #2" ++ ++# ++# test break at line number in file ++# ++send_gdb "tbreak $srcfile:$bp_location2\n" ++gdb_expect { ++ -re "Breakpoint.*at.* file .*$srcfile, line $bp_location2.*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" } ++ -re ".*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" } ++ timeout { fail "Temporary breakpoint line number in file #1 (timeout)" } ++} ++ ++set bp_location11 [gdb_get_line_number "set breakpoint 11 here"] ++gdb_test "tbreak $srcfile:$bp_location11" "Breakpoint.*at.* file .*$srcfile, line $bp_location11.*" "Temporary breakpoint line number in file #2" ++ ++# ++# check to see what breakpoints are set (temporary this time) ++# ++gdb_test "info break" "Num Type.*Disp Enb Address.*What.*\[\r\n\] ++\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$main_line.*\[\r\n\] ++\[0-9\]+\[\t \]+breakpoint del.*y.*in factorial$proto at .*$srcfile:$bp_location7.*\[\r\n\] ++\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location1.*\[\r\n\] ++\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location6.*\[\r\n\] ++\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location2.*\[\r\n\] ++\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location11.*" \ ++ "Temporary breakpoint info" ++ ++ ++#*********** ++ ++# Verify that catchpoints for fork, vfork and exec don't trigger ++# inappropriately. (There are no calls to those system functions ++# in this test program.) ++# ++if ![runto_main] then { fail "break tests suppressed" } ++ ++send_gdb "catch\n" ++gdb_expect { ++ -re "Catch requires an event name.*$gdb_prompt $"\ ++ {pass "catch requires an event name"} ++ -re "$gdb_prompt $"\ ++ {fail "catch requires an event name"} ++ timeout {fail "(timeout) catch requires an event name"} ++} ++ ++ ++set name "set catch fork, never expected to trigger" ++send_gdb "catch fork\n" ++gdb_expect { ++ -re "Catchpoint \[0-9\]* .fork..*$gdb_prompt $" ++ {pass $name} ++ -re "Catch of fork not yet implemented.*$gdb_prompt $" ++ {pass $name} ++ -re "$gdb_prompt $" ++ {fail $name} ++ timeout {fail "(timeout) $name"} ++} ++ ++ ++set name "set catch vfork, never expected to trigger" ++send_gdb "catch vfork\n" ++ ++# If we are on HP-UX 10.20, we expect an error message to be ++# printed if we type "catch vfork" at the gdb gdb_prompt. This is ++# because on HP-UX 10.20, we cannot catch vfork events. ++ ++if [istarget "hppa*-hp-hpux10.20"] then { ++ gdb_expect { ++ -re "Catch of vfork events not supported on HP-UX 10.20..*$gdb_prompt $" ++ {pass $name} ++ -re "$gdb_prompt $" ++ {fail $name} ++ timeout {fail "(timeout) $name"} ++ } ++} else { ++ gdb_expect { ++ -re "Catchpoint \[0-9\]* .vfork..*$gdb_prompt $" ++ {pass $name} ++ -re "Catch of vfork not yet implemented.*$gdb_prompt $" ++ {pass $name} ++ -re "$gdb_prompt $" ++ {fail $name} ++ timeout {fail "(timeout) $name"} ++ } ++} ++ ++set name "set catch exec, never expected to trigger" ++send_gdb "catch exec\n" ++gdb_expect { ++ -re "Catchpoint \[0-9\]* .exec..*$gdb_prompt $" ++ {pass $name} ++ -re "Catch of exec not yet implemented.*$gdb_prompt $" ++ {pass $name} ++ -re "$gdb_prompt $" {fail $name} ++ timeout {fail "(timeout) $name"} ++} ++ ++# Verify that GDB responds gracefully when asked to set a breakpoint ++# on a nonexistent source line. ++# ++send_gdb "break 999\n" ++gdb_expect { ++ -re "No line 999 in file .*$gdb_prompt $"\ ++ {pass "break on non-existent source line"} ++ -re "$gdb_prompt $"\ ++ {fail "break on non-existent source line"} ++ timeout {fail "(timeout) break on non-existent source line"} ++} ++ ++# Run to the desired default location. If not positioned here, the ++# tests below don't work. ++# ++gdb_test "until $bp_location1" "main .* at .*:$bp_location1.*" "until bp_location1" ++ ++ ++# Verify that GDB allows one to just say "break", which is treated ++# as the "default" breakpoint. Note that GDB gets cute when printing ++# the informational message about other breakpoints at the same ++# location. We'll hit that bird with this stone too. ++# ++send_gdb "break\n" ++gdb_expect { ++ -re "Breakpoint \[0-9\]*.*$gdb_prompt $"\ ++ {pass "break on default location, 1st time"} ++ -re "$gdb_prompt $"\ ++ {fail "break on default location, 1st time"} ++ timeout {fail "(timeout) break on default location, 1st time"} ++} ++ ++send_gdb "break\n" ++gdb_expect { ++ -re "Note: breakpoint \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\ ++ {pass "break on default location, 2nd time"} ++ -re "$gdb_prompt $"\ ++ {fail "break on default location, 2nd time"} ++ timeout {fail "(timeout) break on default location, 2nd time"} ++} ++ ++send_gdb "break\n" ++gdb_expect { ++ -re "Note: breakpoints \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\ ++ {pass "break on default location, 3rd time"} ++ -re "$gdb_prompt $"\ ++ {fail "break on default location, 3rd time"} ++ timeout {fail "(timeout) break on default location, 3rd time"} ++} ++ ++send_gdb "break\n" ++gdb_expect { ++ -re "Note: breakpoints \[0-9\]*, \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\ ++ {pass "break on default location, 4th time"} ++ -re "$gdb_prompt $"\ ++ {fail "break on default location, 4th time"} ++ timeout {fail "(timeout) break on default location, 4th time"} ++} ++ ++# Verify that a "silent" breakpoint can be set, and that GDB is indeed ++# "silent" about its triggering. ++# ++if ![runto_main] then { fail "break tests suppressed" } ++ ++send_gdb "break $bp_location1\n" ++gdb_expect { ++ -re "Breakpoint (\[0-9\]*) at .*, line $bp_location1.*$gdb_prompt $"\ ++ {pass "set to-be-silent break bp_location1"} ++ -re "$gdb_prompt $"\ ++ {fail "set to-be-silent break bp_location1"} ++ timeout {fail "(timeout) set to-be-silent break bp_location1"} ++} ++ ++send_gdb "commands $expect_out(1,string)\n" ++send_gdb "silent\n" ++send_gdb "end\n" ++gdb_expect { ++ -re ".*$gdb_prompt $"\ ++ {pass "set silent break bp_location1"} ++ timeout {fail "(timeout) set silent break bp_location1"} ++} ++ ++send_gdb "info break $expect_out(1,string)\n" ++gdb_expect { ++ -re "\[0-9\]*\[ \t\]*breakpoint.*:$bp_location1\r\n\[ \t\]*silent.*$gdb_prompt $"\ ++ {pass "info silent break bp_location1"} ++ -re "$gdb_prompt $"\ ++ {fail "info silent break bp_location1"} ++ timeout {fail "(timeout) info silent break bp_location1"} ++} ++send_gdb "continue\n" ++gdb_expect { ++ -re "Continuing.\r\n$gdb_prompt $"\ ++ {pass "hit silent break bp_location1"} ++ -re "$gdb_prompt $"\ ++ {fail "hit silent break bp_location1"} ++ timeout {fail "(timeout) hit silent break bp_location1"} ++} ++send_gdb "bt\n" ++gdb_expect { ++ -re "#0 main .* at .*:$bp_location1.*$gdb_prompt $"\ ++ {pass "stopped for silent break bp_location1"} ++ -re "$gdb_prompt $"\ ++ {fail "stopped for silent break bp_location1"} ++ timeout {fail "(timeout) stopped for silent break bp_location1"} ++} ++ ++# Verify that GDB can at least parse a breakpoint with the ++# "thread" keyword. (We won't attempt to test here that a ++# thread-specific breakpoint really triggers appropriately. ++# The gdb.threads subdirectory contains tests for that.) ++# ++set bp_location12 [gdb_get_line_number "set breakpoint 12 here"] ++send_gdb "break $bp_location12 thread 999\n" ++gdb_expect { ++ -re "Unknown thread 999.*$gdb_prompt $"\ ++ {pass "thread-specific breakpoint on non-existent thread disallowed"} ++ -re "$gdb_prompt $"\ ++ {fail "thread-specific breakpoint on non-existent thread disallowed"} ++ timeout {fail "(timeout) thread-specific breakpoint on non-existent thread disallowed"} ++} ++send_gdb "break $bp_location12 thread foo\n" ++gdb_expect { ++ -re "Junk after thread keyword..*$gdb_prompt $"\ ++ {pass "thread-specific breakpoint on bogus thread ID disallowed"} ++ -re "$gdb_prompt $"\ ++ {fail "thread-specific breakpoint on bogus thread ID disallowed"} ++ timeout {fail "(timeout) thread-specific breakpoint on bogus thread ID disallowed"} ++} ++ ++# Verify that GDB responds gracefully to a breakpoint command with ++# trailing garbage. ++# ++send_gdb "break $bp_location12 foo\n" ++gdb_expect { ++ -re "Junk at end of arguments..*$gdb_prompt $"\ ++ {pass "breakpoint with trailing garbage disallowed"} ++ -re "$gdb_prompt $"\ ++ {fail "breakpoint with trailing garbage disallowed"} ++ timeout {fail "(timeout) breakpoint with trailing garbage disallowed"} ++} ++ ++# Verify that GDB responds gracefully to a "clear" command that has ++# no matching breakpoint. (First, get us off the current source line, ++# which we know has a breakpoint.) ++# ++send_gdb "next\n" ++gdb_expect { ++ -re ".*$gdb_prompt $"\ ++ {pass "step over breakpoint"} ++ timeout {fail "(timeout) step over breakpoint"} ++} ++send_gdb "clear 81\n" ++gdb_expect { ++ -re "No breakpoint at 81..*$gdb_prompt $"\ ++ {pass "clear line has no breakpoint disallowed"} ++ -re "$gdb_prompt $"\ ++ {fail "clear line has no breakpoint disallowed"} ++ timeout {fail "(timeout) clear line has no breakpoint disallowed"} ++} ++send_gdb "clear\n" ++gdb_expect { ++ -re "No breakpoint at this line..*$gdb_prompt $"\ ++ {pass "clear current line has no breakpoint disallowed"} ++ -re "$gdb_prompt $"\ ++ {fail "clear current line has no breakpoint disallowed"} ++ timeout {fail "(timeout) clear current line has no breakpoint disallowed"} ++} ++ ++# Verify that we can set and clear multiple breakpoints. ++# ++# We don't test that it deletes the correct breakpoints. We do at ++# least test that it deletes more than one breakpoint. ++# ++gdb_test "break marker3" "Breakpoint.*at.*" "break marker3 #1" ++gdb_test "break marker3" "Breakpoint.*at.*" "break marker3 #2" ++gdb_test "clear marker3" {Deleted breakpoints [0-9]+ [0-9]+.*} ++ ++# Verify that a breakpoint can be set via a convenience variable. ++# ++send_gdb "set \$foo=$bp_location11\n" ++gdb_expect { ++ -re "$gdb_prompt $"\ ++ {pass "set convenience variable \$foo to bp_location11"} ++ timeout {fail "(timeout) set convenience variable \$foo to bp_location11"} ++} ++send_gdb "break \$foo\n" ++gdb_expect { ++ -re "Breakpoint (\[0-9\]*) at .*, line $bp_location11.*$gdb_prompt $"\ ++ {pass "set breakpoint via convenience variable"} ++ -re "$gdb_prompt $"\ ++ {fail "set breakpoint via convenience variable"} ++ timeout {fail "(timeout) set breakpoint via convenience variable"} ++} ++ ++# Verify that GDB responds gracefully to an attempt to set a ++# breakpoint via a convenience variable whose type is not integer. ++# ++send_gdb "set \$foo=81.5\n" ++gdb_expect { ++ -re "$gdb_prompt $"\ ++ {pass "set convenience variable \$foo to 81.5"} ++ timeout {fail "(timeout) set convenience variable \$foo to 81.5"} ++} ++send_gdb "break \$foo\n" ++gdb_expect { ++ -re "Convenience variables used in line specs must have integer values..*$gdb_prompt $"\ ++ {pass "set breakpoint via non-integer convenience variable disallowed"} ++ -re "$gdb_prompt $"\ ++ {fail "set breakpoint via non-integer convenience variable disallowed"} ++ timeout {fail "(timeout) set breakpoint via non-integer convenience variable disallowed"} ++} ++ ++# Verify that we can set and trigger a breakpoint in a user-called function. ++# ++send_gdb "break marker2\n" ++gdb_expect { ++ -re "Breakpoint (\[0-9\]*) at .*, line ($bp_location8|$bp_location9).*$gdb_prompt $"\ ++ {pass "set breakpoint on to-be-called function"} ++ -re "$gdb_prompt $"\ ++ {fail "set breakpoint on to-be-called function"} ++ timeout {fail "(timeout) set breakpoint on to-be-called function"} ++} ++send_gdb "print marker2(99)\n" ++gdb_expect { ++ -re "The program being debugged stopped while in a function called from GDB.\r\nWhen the function .marker2$proto. is done executing, GDB will silently\r\nstop .instead of continuing to evaluate the expression containing\r\nthe function call...*$gdb_prompt $"\ ++ {pass "hit breakpoint on called function"} ++ -re "$gdb_prompt $"\ ++ {fail "hit breakpoint on called function"} ++ timeout {fail "(timeout) hit breakpoint on called function"} ++} ++ ++# As long as we're stopped (breakpointed) in a called function, ++# verify that we can successfully backtrace & such from here. ++# ++# In this and the following test, the _sr4export check apparently is needed ++# for hppa*-*-hpux. ++# ++send_gdb "bt\n" ++gdb_expect { ++ -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*_sr4export.*$gdb_prompt $"\ ++ {pass "backtrace while in called function"} ++ -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*function called from gdb.*$gdb_prompt $"\ ++ {pass "backtrace while in called function"} ++ -re "$gdb_prompt $"\ ++ {fail "backtrace while in called function"} ++ timeout {fail "(timeout) backtrace while in called function"} ++} ++ ++# Return from the called function. For remote targets, it's important to do ++# this before runto_main, which otherwise may silently stop on the dummy ++# breakpoint inserted by GDB at the program's entry point. ++# ++send_gdb "finish\n" ++gdb_expect { ++ -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.* in _sr4export.*$gdb_prompt $"\ ++ {pass "finish from called function"} ++ -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*function called from gdb.*$gdb_prompt $"\ ++ {pass "finish from called function"} ++ -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*Value returned.*$gdb_prompt $"\ ++ {pass "finish from called function"} ++ -re "$gdb_prompt $"\ ++ {fail "finish from called function"} ++ timeout {fail "(timeout) finish from called function"} ++} ++ ++# Verify that GDB responds gracefully to a "finish" command with ++# arguments. ++# ++if ![runto_main] then { fail "break tests suppressed" } ++ ++send_gdb "finish 123\n" ++gdb_expect { ++ -re "The \"finish\" command does not take any arguments.\r\n$gdb_prompt $"\ ++ {pass "finish with arguments disallowed"} ++ -re "$gdb_prompt $"\ ++ {fail "finish with arguments disallowed"} ++ timeout {fail "(timeout) finish with arguments disallowed"} ++} ++ ++# Verify that GDB responds gracefully to a request to "finish" from ++# the outermost frame. On a stub that never exits, this will just ++# run to the stubs routine, so we don't get this error... Thus the ++# second condition. ++# ++ ++send_gdb "finish\n" ++gdb_expect { ++ -re "\"finish\" not meaningful in the outermost frame.\r\n$gdb_prompt $"\ ++ {pass "finish from outermost frame disallowed"} ++ -re "Run till exit from.*\r\n$gdb_prompt $" { ++ pass "finish from outermost frame disallowed" ++ } ++ -re "$gdb_prompt $"\ ++ {fail "finish from outermost frame disallowed"} ++ timeout {fail "(timeout) finish from outermost frame disallowed"} ++} ++ ++# Verify that we can explicitly ask GDB to stop on all shared library ++# events, and that it does so. ++# ++if [istarget "hppa*-*-hpux*"] then { ++ if ![runto_main] then { fail "break tests suppressed" } ++ ++ send_gdb "set stop-on-solib-events 1\n" ++ gdb_expect { ++ -re "$gdb_prompt $"\ ++ {pass "set stop-on-solib-events"} ++ timeout {fail "(timeout) set stop-on-solib-events"} ++ } ++ ++ send_gdb "run\n" ++ gdb_expect { ++ -re ".*Start it from the beginning.*y or n. $"\ ++ {send_gdb "y\n" ++ gdb_expect { ++ -re ".*Stopped due to shared library event.*$gdb_prompt $"\ ++ {pass "triggered stop-on-solib-events"} ++ -re "$gdb_prompt $"\ ++ {fail "triggered stop-on-solib-events"} ++ timeout {fail "(timeout) triggered stop-on-solib-events"} ++ } ++ } ++ -re "$gdb_prompt $"\ ++ {fail "rerun for stop-on-solib-events"} ++ timeout {fail "(timeout) rerun for stop-on-solib-events"} ++ } ++ ++ send_gdb "set stop-on-solib-events 0\n" ++ gdb_expect { ++ -re "$gdb_prompt $"\ ++ {pass "reset stop-on-solib-events"} ++ timeout {fail "(timeout) reset stop-on-solib-events"} ++ } ++} ++ ++# Hardware breakpoints are unsupported on HP-UX. Verify that GDB ++# gracefully responds to requests to create them. ++# ++if [istarget "hppa*-*-hpux*"] then { ++ if ![runto_main] then { fail "break tests suppressed" } ++ ++ send_gdb "hbreak\n" ++ gdb_expect { ++ -re "No hardware breakpoint support in the target.*$gdb_prompt $"\ ++ {pass "hw breaks disallowed"} ++ -re "$gdb_prompt $"\ ++ {fail "hw breaks disallowed"} ++ timeout {fail "(timeout) hw breaks disallowed"} ++ } ++ ++ send_gdb "thbreak\n" ++ gdb_expect { ++ -re "No hardware breakpoint support in the target.*$gdb_prompt $"\ ++ {pass "temporary hw breaks disallowed"} ++ -re "$gdb_prompt $"\ ++ {fail "temporary hw breaks disallowed"} ++ timeout {fail "(timeout) temporary hw breaks disallowed"} ++ } ++} ++ ++#******** ++ ++ ++# ++# Test "next" over recursive function call. ++# ++ ++proc test_next_with_recursion {} { ++ global gdb_prompt ++ global decimal ++ global binfile ++ ++ if [target_info exists use_gdb_stub] { ++ # Reload the program. ++ delete_breakpoints ++ gdb_load ${binfile}; ++ } else { ++ # FIXME: should be using runto ++ gdb_test "kill" "" "kill program" "Kill the program being debugged.*y or n. $" "y" ++ ++ delete_breakpoints ++ } ++ ++ gdb_test "break factorial" "Breakpoint $decimal at .*" "break at factorial" ++ ++ # Run until we call factorial with 6 ++ ++ if [istarget "*-*-vxworks*"] then { ++ send_gdb "run vxmain \"6\"\n" ++ } else { ++ gdb_run_cmd ++ } ++ gdb_expect { ++ -re "Break.* factorial .value=6. .*$gdb_prompt $" {} ++ -re ".*$gdb_prompt $" { ++ fail "run to factorial(6)"; ++ gdb_suppress_tests; ++ } ++ timeout { fail "run to factorial(6) (timeout)" ; gdb_suppress_tests } ++ } ++ ++ # Continue until we call factorial recursively with 5. ++ ++ if [gdb_test "continue" \ ++ "Continuing.*Break.* factorial .value=5. .*" \ ++ "continue to factorial(5)"] then { gdb_suppress_tests } ++ ++ # Do a backtrace just to confirm how many levels deep we are. ++ ++ if [gdb_test "backtrace" \ ++ "#0\[ \t\]+ factorial .value=5..*" \ ++ "backtrace from factorial(5)"] then { gdb_suppress_tests } ++ ++ # Now a "next" should position us at the recursive call, which ++ # we will be performing with 4. ++ ++ if [gdb_test "next" \ ++ ".* factorial .value - 1.;.*" \ ++ "next to recursive call"] then { gdb_suppress_tests } ++ ++ # Disable the breakpoint at the entry to factorial by deleting them all. ++ # The "next" should run until we return to the next line from this ++ # recursive call to factorial with 4. ++ # Buggy versions of gdb will stop instead at the innermost frame on ++ # the line where we are trying to "next" to. ++ ++ delete_breakpoints ++ ++ if [istarget "mips*tx39-*"] { ++ set timeout 60 ++ } ++ # We used to set timeout here for all other targets as well. This ++ # is almost certainly wrong. The proper timeout depends on the ++ # target system in use, and how we communicate with it, so there ++ # is no single value appropriate for all targets. The timeout ++ # should be established by the Dejagnu config file(s) for the ++ # board, and respected by the test suite. ++ # ++ # For example, if I'm running GDB over an SSH tunnel talking to a ++ # portmaster in California talking to an ancient 68k board running ++ # a crummy ROM monitor (a situation I can only wish were ++ # hypothetical), then I need a large timeout. But that's not the ++ # kind of knowledge that belongs in this file. ++ ++ gdb_test next "\[0-9\]*\[\t \]+return \\(value\\);.*" \ ++ "next over recursive call" ++ ++ # OK, we should be back in the same stack frame we started from. ++ # Do a backtrace just to confirm. ++ ++ set result [gdb_test "backtrace" \ ++ "#0\[ \t\]+ factorial .value=120.*\r\n#1\[ \t\]+ \[0-9a-fx\]+ in factorial .value=6..*" \ ++ "backtrace from factorial(5.1)"] ++ if { $result != 0 } { gdb_suppress_tests } ++ ++ if [target_info exists gdb,noresults] { gdb_suppress_tests } ++ gdb_continue_to_end "recursive next test" ++ gdb_stop_suppressing_tests; ++} ++ ++test_next_with_recursion ++ ++ ++#******** ++ ++# build a new file with optimization enabled so that we can try breakpoints ++# on targets with optimized prologues ++ ++set binfileo2 ${objdir}/${subdir}/${testfile}o2 ++ ++if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}O0.o" object {debug "additional_flags=-w -O2 -fpie -pie"}] != "" } { ++ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." ++} ++ ++if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile}O1.o" object {debug "additional_flags=-w -O2 -fpie -pie"}] != "" } { ++ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." ++} ++ ++if { [gdb_compile "${binfile}O0.o ${binfile}O1.o" "${binfileo2}" executable {debug "additional_flags=-w -fpie -pie"}] != "" } { ++ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." ++} ++ ++if [get_compiler_info ${binfileo2}] { ++ return -1 ++} ++ ++gdb_exit ++gdb_start ++gdb_reinitialize_dir $srcdir/$subdir ++gdb_load ${binfileo2} ++ ++if [target_info exists gdb_stub] { ++ gdb_step_for_stub; ++} ++ ++# ++# test break at function ++# ++gdb_test "break main" \ ++ "Breakpoint.*at.* file .*$srcfile, line.*" \ ++ "breakpoint function, optimized file" ++ ++# ++# test break at function ++# ++gdb_test "break marker4" \ ++ "Breakpoint.*at.* file .*$srcfile1, line.*" \ ++ "breakpoint small function, optimized file" ++ ++# ++# run until the breakpoint at main is hit. For non-stubs-using targets. ++# ++if ![target_info exists use_gdb_stub] { ++ if [istarget "*-*-vxworks*"] then { ++ send_gdb "run vxmain \"2\"\n" ++ set timeout 120 ++ verbose "Timeout is now $timeout seconds" 2 ++ } else { ++ send_gdb "run\n" ++ } ++ gdb_expect { ++ -re "The program .* has been started already.*y or n. $" { ++ send_gdb "y\n" ++ exp_continue ++ } ++ -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $"\ ++ { pass "run until function breakpoint, optimized file" } ++ -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$gdb_prompt $"\ ++ { pass "run until function breakpoint, optimized file (code motion)" } ++ -re ".*$gdb_prompt $" { fail "run until function breakpoint, optimized file" } ++ timeout { fail "run until function breakpoint, optimized file (timeout)" } ++ } ++} else { ++ if ![target_info exists gdb_stub] { ++ gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.*\{.*" "stub continue, optimized file" ++ } ++} ++ ++# ++# run until the breakpoint at a small function ++# ++ ++# ++# Add a second pass pattern. The behavior differs here between stabs ++# and dwarf for one-line functions. Stabs preserves two line symbols ++# (one before the prologue and one after) with the same line number, ++# but dwarf regards these as duplicates and discards one of them. ++# Therefore the address after the prologue (where the breakpoint is) ++# has no exactly matching line symbol, and GDB reports the breakpoint ++# as if it were in the middle of a line rather than at the beginning. ++ ++set bp_location13 [gdb_get_line_number "set breakpoint 13 here" $srcfile1] ++set bp_location14 [gdb_get_line_number "set breakpoint 14 here" $srcfile1] ++send_gdb "continue\n" ++gdb_expect { ++ -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile1:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" { ++ pass "run until breakpoint set at small function, optimized file" ++ } ++ -re "Breakpoint $decimal, $hex in marker4 \\(d=177601976\\) at .*$srcfile1:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" { ++ pass "run until breakpoint set at small function, optimized file" ++ } ++ -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile1:$bp_location14\[\r\n\]+$bp_location14\[\t \]+void marker4.*" { ++ # marker4() is defined at line 46 when compiled with -DPROTOTYPES ++ pass "run until breakpoint set at small function, optimized file (line bp_location14)" ++ } ++ -re ".*$gdb_prompt " { ++ fail "run until breakpoint set at small function, optimized file" ++ } ++ timeout { ++ fail "run until breakpoint set at small function, optimized file (timeout)" ++ } ++} ++ ++ ++# Reset the default arguments for VxWorks ++if [istarget "*-*-vxworks*"] { ++ set timeout 10 ++ verbose "Timeout is now $timeout seconds" 2 ++ send_gdb "set args main\n" ++ gdb_expect -re ".*$gdb_prompt $" {} ++} +Index: gdb-6.8/gdb/testsuite/gdb.pie/break1.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ gdb-6.8/gdb/testsuite/gdb.pie/break1.c 2008-03-30 08:59:12.000000000 -0700 +@@ -0,0 +1,44 @@ ++/* This testcase is part of GDB, the GNU debugger. ++ ++ Copyright 1992, 1993, 1994, 1995, 1999, 2002, 2003 Free Software ++ Foundation, Inc. ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the Free Software ++ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ ++ Please email any bugs, comments, and/or additions to this file to: ++ bug-gdb@prep.ai.mit.edu */ ++ ++/* The code for this file was extracted from the gdb testsuite ++ testcase "break.c". */ ++ ++/* The following functions do nothing useful. They are included ++ simply as places to try setting breakpoints at. They are ++ explicitly "one-line functions" to verify that this case works ++ (some versions of gcc have or have had problems with this). ++ ++ These functions are in a separate source file to prevent an ++ optimizing compiler from inlining them and optimizing them away. */ ++ ++#ifdef PROTOTYPES ++int marker1 (void) { return (0); } /* set breakpoint 15 here */ ++int marker2 (int a) { return (1); } /* set breakpoint 8 here */ ++void marker3 (char *a, char *b) {} /* set breakpoint 17 here */ ++void marker4 (long d) {} /* set breakpoint 14 here */ ++#else ++int marker1 () { return (0); } /* set breakpoint 16 here */ ++int marker2 (a) int a; { return (1); } /* set breakpoint 9 here */ ++void marker3 (a, b) char *a, *b; {} /* set breakpoint 18 here */ ++void marker4 (d) long d; {} /* set breakpoint 13 here */ ++#endif +Index: gdb-6.8/gdb/testsuite/gdb.pie/corefile.exp +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ gdb-6.8/gdb/testsuite/gdb.pie/corefile.exp 2008-03-30 08:59:12.000000000 -0700 +@@ -0,0 +1,243 @@ ++# Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 ++# Free Software Foundation, Inc. ++ ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ ++# Please email any bugs, comments, and/or additions to this file to: ++# bug-gdb@prep.ai.mit.edu ++ ++# This file was written by Fred Fish. (fnf@cygnus.com) ++ ++if $tracelevel then { ++ strace $tracelevel ++} ++ ++set prms_id 0 ++set bug_id 0 ++ ++# are we on a target board ++if ![isnative] then { ++ return ++} ++ ++set testfile "coremaker" ++set srcfile ${testfile}.c ++set binfile ${objdir}/${subdir}/${testfile} ++if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug "additional_flags=-fpie -pie"}] != "" } { ++ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." ++} ++ ++# Create and source the file that provides information about the compiler ++# used to compile the test case. ++if [get_compiler_info ${binfile}] { ++ return -1; ++} ++ ++# Create a core file named "corefile" rather than just "core", to ++# avoid problems with sys admin types that like to regularly prune all ++# files named "core" from the system. ++# ++# Arbitrarily try setting the core size limit to "unlimited" since ++# this does not hurt on systems where the command does not work and ++# allows us to generate a core on systems where it does. ++# ++# Some systems append "core" to the name of the program; others append ++# the name of the program to "core"; still others (like Linux, as of ++# May 2003) create cores named "core.PID". In the latter case, we ++# could have many core files lying around, and it may be difficult to ++# tell which one is ours, so let's run the program in a subdirectory. ++set found 0 ++set coredir "${objdir}/${subdir}/coredir.[getpid]" ++file mkdir $coredir ++catch "system \"(cd ${coredir}; ulimit -c unlimited; ${binfile}; true) >/dev/null 2>&1\"" ++# remote_exec host "${binfile}" ++foreach i "${coredir}/core ${coredir}/core.coremaker.c ${binfile}.core" { ++ if [remote_file build exists $i] { ++ remote_exec build "mv $i ${objdir}/${subdir}/corefile" ++ set found 1 ++ } ++} ++# Check for "core.PID". ++if { $found == 0 } { ++ set names [glob -nocomplain -directory $coredir core.*] ++ if {[llength $names] == 1} { ++ set corefile [file join $coredir [lindex $names 0]] ++ remote_exec build "mv $corefile ${objdir}/${subdir}/corefile" ++ set found 1 ++ } ++} ++if { $found == 0 } { ++ # The braindamaged HPUX shell quits after the ulimit -c above ++ # without executing ${binfile}. So we try again without the ++ # ulimit here if we didn't find a core file above. ++ # Oh, I should mention that any "braindamaged" non-Unix system has ++ # the same problem. I like the cd bit too, it's really neat'n stuff. ++ catch "system \"(cd ${objdir}/${subdir}; ${binfile}; true) >/dev/null 2>&1\"" ++ foreach i "${objdir}/${subdir}/core ${objdir}/${subdir}/core.coremaker.c ${binfile}.core" { ++ if [remote_file build exists $i] { ++ remote_exec build "mv $i ${objdir}/${subdir}/corefile" ++ set found 1 ++ } ++ } ++} ++ ++# Try to clean up after ourselves. ++remote_file build delete [file join $coredir coremmap.data] ++remote_exec build "rmdir $coredir" ++ ++if { $found == 0 } { ++ warning "can't generate a core file - core tests suppressed - check ulimit -c" ++ return 0 ++} ++ ++# ++# Test that we can simply startup with a "-core=corefile" command line arg ++# and recognize that the core file is a valid, usable core file. ++# To do this, we must shutdown the currently running gdb and restart ++# with the -core args. We can't use gdb_start because it looks for ++# the first gdb prompt, and the message we are looking for occurs ++# before the first prompt. Also, we can't include GDBFLAGS because ++# if it is empty, this confuses gdb with an empty argument that it ++# grumbles about (said grumbling currently being ignored in gdb_start). ++# **FIXME** ++# ++# Another problem is that on some systems (solaris for example), there ++# is apparently a limit on the length of a fully specified path to ++# the coremaker executable, at about 80 chars. For this case, consider ++# it a pass, but note that the program name is bad. ++ ++gdb_exit ++if $verbose>1 then { ++ send_user "Spawning $GDB -nw $GDBFLAGS -core=$objdir/$subdir/corefile\n" ++} ++ ++set oldtimeout $timeout ++set timeout [expr "$timeout + 60"] ++verbose "Timeout is now $timeout seconds" 2 ++eval "spawn $GDB -nw $GDBFLAGS -core=$objdir/$subdir/corefile" ++expect { ++ -re "Couldn't find .* registers in core file.*$gdb_prompt $" { ++ fail "args: -core=corefile (couldn't find regs)" ++ } ++ -re "Core was generated by .*coremaker.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { ++ pass "args: -core=corefile" ++ } ++ -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { ++ pass "args: -core=corefile (with bad program name)" ++ } ++ -re ".*registers from core file: File in wrong format.* $" { ++ fail "args: -core=corefile (could not read registers from core file)" ++ } ++ -re ".*$gdb_prompt $" { fail "args: -core=corefile" } ++ timeout { fail "(timeout) starting with -core" } ++} ++ ++ ++# ++# Test that startup with both an executable file and -core argument. ++# See previous comments above, they are still applicable. ++# ++ ++close; ++ ++if $verbose>1 then { ++ send_user "Spawning $GDB -nw $GDBFLAGS $binfile -core=$objdir/$subdir/corefile\n" ++} ++ ++ ++eval "spawn $GDB -nw $GDBFLAGS $binfile -core=$objdir/$subdir/corefile"; ++expect { ++ -re "Core was generated by .*coremaker.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { ++ pass "args: execfile -core=corefile" ++ } ++ -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { ++ pass "args: execfile -core=corefile (with bad program name)" ++ } ++ -re ".*registers from core file: File in wrong format.* $" { ++ fail "args: execfile -core=corefile (could not read registers from core file)" ++ } ++ -re ".*$gdb_prompt $" { fail "args: execfile -core=corefile" } ++ timeout { fail "(timeout) starting with -core" } ++} ++set timeout $oldtimeout ++verbose "Timeout is now $timeout seconds" 2 ++ ++close; ++ ++# Now restart normally. ++ ++gdb_start ++gdb_reinitialize_dir $srcdir/$subdir ++gdb_load ${binfile} ++ ++# Test basic corefile recognition via core-file command. ++ ++send_gdb "core-file $objdir/$subdir/corefile\n" ++gdb_expect { ++ -re ".* program is being debugged already.*y or n. $" { ++ # gdb_load may connect us to a gdbserver. ++ send_gdb "y\n" ++ exp_continue; ++ } ++ -re "Core was generated by .*coremaker.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { ++ pass "core-file command" ++ } ++ -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { ++ pass "core-file command (with bad program name)" ++ } ++ -re ".*registers from core file: File in wrong format.* $" { ++ fail "core-file command (could not read registers from core file)" ++ } ++ -re ".*$gdb_prompt $" { fail "core-file command" } ++ timeout { fail "(timeout) core-file command" } ++} ++ ++# Test correct mapping of corefile sections by printing some variables. ++ ++gdb_test "print coremaker_data" "\\\$$decimal = 202" ++gdb_test "print coremaker_bss" "\\\$$decimal = 10" ++gdb_test "print coremaker_ro" "\\\$$decimal = 201" ++ ++gdb_test "print func2::coremaker_local" "\\\$$decimal = \\{0, 1, 2, 3, 4\\}" ++ ++# Somehow we better test the ability to read the registers out of the core ++# file correctly. I don't think the other tests do this. ++ ++gdb_test "bt" "abort.*func2.*func1.*main.*" "backtrace in corefile.exp" ++gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(.*\\).*" "up in corefile.exp" ++ ++# Test ability to read mmap'd data ++ ++gdb_test "x/8bd buf1" ".*:.*0.*1.*2.*3.*4.*5.*6.*7" "accessing original mmap data in core file" ++setup_xfail "*-*-sunos*" "*-*-ultrix*" "*-*-aix*" ++set test "accessing mmapped data in core file" ++gdb_test_multiple "x/8bd buf2" "$test" { ++ -re ".*:.*0.*1.*2.*3.*4.*5.*6.*7.*$gdb_prompt $" { ++ pass "$test" ++ } ++ -re "0x\[f\]*:.*Cannot access memory at address 0x\[f\]*.*$gdb_prompt $" { ++ fail "$test (mapping failed at runtime)" ++ } ++ -re "0x.*:.*Cannot access memory at address 0x.*$gdb_prompt $" { ++ fail "$test (mapping address not found in core file)" ++ } ++} ++ ++# test reinit_frame_cache ++ ++gdb_load ${binfile} ++gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(\\).*" "up in corefile.exp (reinit)" ++ ++gdb_test "core" "No core file now." +Index: gdb-6.8/gdb/testsuite/gdb.pie/coremaker.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ gdb-6.8/gdb/testsuite/gdb.pie/coremaker.c 2008-03-30 08:59:12.000000000 -0700 +@@ -0,0 +1,142 @@ ++/* Copyright 1992, 1993, 1994, 1995, 1996, 1999 ++ Free Software Foundation, Inc. ++ ++ This file is part of GDB. ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or (at ++ your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, but ++ WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program; if not, write to the Free Software ++ Foundation, Inc., 59 Temple Place - Suite 330, ++ Boston, MA 02111-1307, USA. */ ++ ++/* Simple little program that just generates a core dump from inside some ++ nested function calls. */ ++ ++#include <stdio.h> ++#include <sys/types.h> ++#include <fcntl.h> ++#include <sys/mman.h> ++#include <signal.h> ++#include <stdlib.h> ++#include <unistd.h> ++ ++#ifndef __STDC__ ++#define const /**/ ++#endif ++ ++#define MAPSIZE (8 * 1024) ++ ++/* Don't make these automatic vars or we will have to walk back up the ++ stack to access them. */ ++ ++char *buf1; ++char *buf2; ++ ++int coremaker_data = 1; /* In Data section */ ++int coremaker_bss; /* In BSS section */ ++ ++const int coremaker_ro = 201; /* In Read-Only Data section */ ++ ++/* Note that if the mapping fails for any reason, we set buf2 ++ to -1 and the testsuite notices this and reports it as ++ a failure due to a mapping error. This way we don't have ++ to test for specific errors when running the core maker. */ ++ ++void ++mmapdata () ++{ ++ int j, fd; ++ ++ /* Allocate and initialize a buffer that will be used to write ++ the file that is later mapped in. */ ++ ++ buf1 = (char *) malloc (MAPSIZE); ++ for (j = 0; j < MAPSIZE; ++j) ++ { ++ buf1[j] = j; ++ } ++ ++ /* Write the file to map in */ ++ ++ fd = open ("coremmap.data", O_CREAT | O_RDWR, 0666); ++ if (fd == -1) ++ { ++ perror ("coremmap.data open failed"); ++ buf2 = (char *) -1; ++ return; ++ } ++ write (fd, buf1, MAPSIZE); ++ ++ /* Now map the file into our address space as buf2 */ ++ ++ buf2 = (char *) mmap (0, MAPSIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); ++ if (buf2 == (char *) -1) ++ { ++ perror ("mmap failed"); ++ return; ++ } ++ ++ /* Verify that the original data and the mapped data are identical. ++ If not, we'd rather fail now than when trying to access the mapped ++ data from the core file. */ ++ ++ for (j = 0; j < MAPSIZE; ++j) ++ { ++ if (buf1[j] != buf2[j]) ++ { ++ fprintf (stderr, "mapped data is incorrect"); ++ buf2 = (char *) -1; ++ return; ++ } ++ } ++} ++ ++void ++func2 () ++{ ++ int coremaker_local[5]; ++ int i; ++ ++#ifdef SA_FULLDUMP ++ /* Force a corefile that includes the data section for AIX. */ ++ { ++ struct sigaction sa; ++ ++ sigaction (SIGABRT, (struct sigaction *)0, &sa); ++ sa.sa_flags |= SA_FULLDUMP; ++ sigaction (SIGABRT, &sa, (struct sigaction *)0); ++ } ++#endif ++ ++ /* Make sure that coremaker_local doesn't get optimized away. */ ++ for (i = 0; i < 5; i++) ++ coremaker_local[i] = i; ++ coremaker_bss = 0; ++ for (i = 0; i < 5; i++) ++ coremaker_bss += coremaker_local[i]; ++ coremaker_data = coremaker_ro + 1; ++ abort (); ++} ++ ++void ++func1 () ++{ ++ func2 (); ++} ++ ++int main () ++{ ++ mmapdata (); ++ func1 (); ++ return 0; ++} ++ |