blob: 6b839e80c58a787a6e53ae6c2061cb624f8e848f (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
|
# To run multiple quicktun instances, copy this file to /etc/quicktun/example.conf,
# create a symlink /etc/init.d/quicktun.example -> quicktun
# and initialize the tunnel by issuing: rc-service quicktun.example start
# interface name
#export INTERFACE=
# set to 1 to operate in tun (IP), unset or 0 (recent versions only) for tap (Ethernet) mode
#export TUN_MODE=0
# set to 1 to include packet information header in wire packets, must be set on both sides if
# used; set to 2 to automatically add the packet information header for cross-platform compatibility
# (also compatible with USE_PI=0), some (BSD) kernels need USE_PI to be enabled for IPv6 support
#export USE_PI=0
# IP address or hostname of the remote end (use 0.0.0.0 for a floating/dynamic remote endpoint)
#export REMOTE_ADDRESS=0.0.0.0
# IP address or hostname of the local end, optional
#export LOCAL_ADDRESS=
# local UDP port, optional, defaults to 2998
#export LOCAL_PORT=2998
# remote UDP port, optional, defaults to LOCAL_PORT
#export REMOTE_PORT=${LOCAL_PORT}
# allows the remote address and port to change when properly encrypted packets are received
#export REMOTE_FLOAT=
# run specified command or script after the tunnel device has been opened
#export TUN_UP_SCRIPT=
# drop privileges and change user and group IDs to specified username after setting up the tunnel
export SETUID=quicktun
# nacl0, nacltai and salty (encrypted) protocols only:
#export PRIVATE_KEY= # local secret key in hexadecimal form (not needed for raw protocol)
#export PUBLIC_KEY= # remote public key in hexadecimal form (not needed for raw protocol)
#export PRIVATE_KEY_FILE= # file containing local secret key in binary or hexadecimal form (not needed for raw protocol)
# nacltai (encrypted) protocol only:
# allowed time window for first received packet in seconds (positive number allows packets from history)
#export TIME_WINDOW=
# the protocol to use, one of "raw", "nacl0" and "nacltai"
#export PROTOCOL=raw
|
