diff options
Diffstat (limited to 'solaris/README.txt')
| -rw-r--r-- | solaris/README.txt | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/solaris/README.txt b/solaris/README.txt new file mode 100644 index 00000000..86295e0a --- /dev/null +++ b/solaris/README.txt @@ -0,0 +1,107 @@ +To build packages for Solaris 10: + +Requirements: +------------- + +- Development environment including gcc (eg as shipped with Solaris 10) + +- The Package tools from S10 + +- i.manifest and r.manifest scripts as supplied with Solaris Express + in /usr/sadm/install/scripts/ or alternatively from the + download/binaries/solaris/ directory on quagga.net. i.manifest must be at + least version 1.5. You can place these scripts in this directory if you + are using Solaris 10 GA (which does not ship with these scripts). + + +Package creation instructions: +------------------------------ + +1. Configure and build Quagga in the top level build directory as per +normal, eg: + + ./configure --prefix=/usr/local/quagga \ + --localstatedir=/var/run/quagga + --enable-gcc-rdynamic --enable-opaque-lsa --enable-ospf-te \ + --enable-multipath=64 --enable-user=quagga \ + --enable-ospfclient=yes --enable-ospfapi=yes \ + --enable-group=quagga --enable-nssa --enable-opaque-lsa + +You will need /usr/sfw/bin and /usr/ccs/bin in your path. + +2. make install in the top-level build directory, it's a good idea to make +use of DESTDIR to install to an alternate root, eg: + + make DESTDIR=/var/tmp/qroot install + +3. In this directory, run make packages, specifying DESTDIR if appropriate, +eg: + + make DESTDIR=/var/tmp/qroot packages + +This should result in 4 packages being created: + + quagga-libs-...-$ARCH.pkg - QUAGGAlibs + quagga-daemons-...-$ARCH.pkg - QUAGGAdaemons + quagga-doc-...-$ARCH.pkg - QUAGGAdoc + quagga-dev-...-$ARCH.pkg - QUAGGAdev + +QUAGGAlibs and QUAGGAdaemons are needed for daemon runtime. + + +Install and post-install configuration notes: +--------------------------------------------- + +- If you specified a user/group which does not exist per default on Solaris + (eg quagga/quagga) you *must* create these before installing these on a + system. The packages do *not* create the users. + +- The configuration files are not created. You must create the configuration + file yourself, either with your complete desired configuration, or else if + you wish to use the telnet interface for further configuration you must + create them containing at least: + + password whatever + + The user which quagga runs as must have write permissions on this file, no + other user should have read permissions, and you would also have to enable + the telnet interface (see below). + +- Configuration of common options are by way of SMF properties named Quagga, + the defaults should be inline with how you configured Quagga in Step 1 + above, eg: + + Quagga/config_file astring /usr/local/quagga/etc/zebra.conf + Quagga/daemon_name astring zebra + Quagga/group astring quagga + Quagga/pid_file astring /var/run/quagga/zebra.pid + Quagga/stability astring Evolving + Quagga/user astring quagga + Quagga/vty_addr astring 127.1 + Quagga/vty_port integer 0 + + Note that by default the telnet 'vty' interface is disabled - + Quagga/vty_port is set to 0. Other daemon-specific options may be + available, however they are not yet honoured/used (eg ospfd/apiserver on + svc:/network/ospf). + + You can change these properties with the 'svccfg' SMF utility, eg: + + # svccfg + svc:> select svc:/network/zebra + svc:/network/zebra> listprop Quagga/vty_port + Quagga/vty_port integer 0 + svc:/network/zebra> setprop Quagga/vty_port = 2601 + svc:/network/zebra> listprop Quagga/vty_port + Quagga/vty_port integer 2601 + svc:/network/zebra> quit + # svcprop -p Quagga/vty_port network/zebra + 2601 + + As SMF is dependency aware, restarting network/zebra will restart all the + other daemons. + +- These packages are not supported by Sun Microsystems, report bugs via the + usual Quagga channels, ie Bugzilla. Improvements/contributions of course + would be greatly appreciated. + |