summaryrefslogtreecommitdiffstats
path: root/bgpd/bgp_attr.c
Commit message (Collapse)AuthorAgeFilesLines
* bgpd: set BGP_ATTR_MP_[UN]REACH_NLRI (fixes 1a211cb)David Lamparter2014-12-081-0/+5
| | | | | | | | | | | Unfortunately, the attribute present bits for MP_REACH and MP_UNREACH which 1a211cb ("bgpd: one more fix"...) tests for are never set in their corresponding attribute parsing functions. Reported-by: Martin Winter <mwinter@netdef.org> Fixes: 1a211cb "bgpd: one more fix for tightening of check for missing well-known attributes" Cc: Paul Jakma <paul@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: one more fix for tightening of check for missing well-known attributesPaul Jakma2014-11-251-2/+2
| | | | | | | | | * bgp_attr.c: (bgp_attr_check) The check for missing NEXT_HOP has the right spirit, but wrong where it counts, on the logic. It wouldn't catch a missing NEXT_HOP on a v4-only UPDATE. It would though have incorrectly flagged next-hop as missing on multi-protocol-only UPDATEs. Caught by Martin Winter with a test-suite.
* bgpd: Fixes for recent well-known-attr check patch.Paul Jakma2014-10-281-6/+27
| | | | | | | | | | | | | | * bgp_attr.c: Recent patch to tighten well-known attr checks and apply that to all AFIs has some breakage with MP-extensions and GR, which needs to be fixed. (bgp_attr_check) Graceful Restart EoR can be an empty UPDATE for IPv4/uni. MP-Ext allow UPDATE with just MP_UNREACH_NLRI. Check for these and return proceed. NEXT_HOP becomes optional, if MP_REACH_NLRI is present and there's no v4 NLTI, update NEXT_HOP check accordingly. Print the missing attr in string form in the log message. (bgp_attr_parse) AS_PATH need not be there, so bgp_attr_munge_as4_attrs call needs to be conditional on that.
* bgpd: well-known attr check only run for v4/uni, which could cause a crash.Paul Jakma2014-10-171-42/+59
| | | | | | | | | | | | | | | | | | | | | | * ANVL testing by Martin Winter threw up a crash in bgpd in aspath_dup called from bgp_packet_attribute, if attr->aspath was NULL, on an IPv6 UPDATE. This root cause is that the checks for well-known, mandatory attributes were being applied only if an UPDATE contained the IPv4 NLRI and the peer was configured for v4/unicast (i.e. not deconfigured). This is something inherited from GNU Zebra, and never noticed before. * bgp_attr.c: (bgp_attr_parse) Move the well-known mandatory attribute check to here, so that it can be run immediately after all attributes are parsed, and before any further processing of attributes that might assume the existence of WK/M attributes (e.g. AS4-Path). (bgp_attr_munge_as4_attrs) Missing AS_PATH shouldn't happen here anymore, but retain a check anyway for robustness - it's definitely a hard error though. * bgp_attr.h: (bgp_attr_check) No longer needs to be exported, make static. * bgp_packet.c: (bgp_update_receive) Responsibility for well-known check now in bgp_attr_parse.
* Fix most compiler warnings in default GCC build.Paul Jakma2014-09-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix lots of warnings. Some const and type-pun breaks strict-aliasing warnings left but much reduced. * bgp_advertise.h: (struct bgp_advertise_fifo) is functionally identical to (struct fifo), so just use that. Makes it clearer the beginning of (struct bgp_advertise) is compatible with with (struct fifo), which seems to be enough for gcc. Add a BGP_ADV_FIFO_HEAD macro to contain the right cast to try shut up type-punning breaks strict aliasing warnings. * bgp_packet.c: Use BGP_ADV_FIFO_HEAD. (bgp_route_refresh_receive) fix an interesting logic error in (!ok || (ret != BLAH)) where ret is only well-defined if ok. * bgp_vty.c: Peer commands should use bgp_vty_return to set their return. * jhash.{c,h}: Can take const on * args without adding issues & fix warnings. * libospf.h: LSA sequence numbers use the unsigned range of values, and constants need to be set to unsigned, or it causes warnings in ospf6d. * md5.h: signedness of caddr_t is implementation specific, change to an explicit (uint_8 *), fix sign/unsigned comparison warnings. * vty.c: (vty_log_fixed) const on level is well-intentioned, but not going to fly given iov_base. * workqueue.c: ALL_LIST_ELEMENTS_RO tests for null pointer, which is always true for address of static variable. Correct but pointless warning in this case, but use a 2nd pointer to shut it up. * ospf6_route.h: Add a comment about the use of (struct prefix) to stuff 2 different 32 bit IDs into in (struct ospf6_route), and the resulting type-pun strict-alias breakage warnings this causes. Need to use 2 different fields to fix that warning? general: * remove unused variables, other than a few cases where they serve a sufficiently useful documentary purpose (e.g. for code that needs fixing), or they're required dummies. In those cases, try mark them as unused. * Remove dead code that can't be reached. * Quite a few 'no ...' forms of vty commands take arguments, but do not check the argument matches the command being negated. E.g., should 'distance X <prefix>' succeed if previously 'distance Y <prefix>' was set? Or should it be required that the distance match the previously configured distance for the prefix? Ultimately, probably better to be strict about this. However, changing from slack to strict might expose problems in command aliases and tools. * Fix uninitialised use of variables. * Fix sign/unsigned comparison warnings by making signedness of types consistent. * Mark functions as static where their use is restricted to the same compilation unit. * Add required headers * Move constants defined in headers into code. * remove dead, unused functions that have no debug purpose.
* bgpd: don't send NOTIFY twice for malformed attrsDavid Lamparter2014-06-291-12/+22
| | | | | | | Most of the attribute parsing functions were already sending a notify, let's clean up the code to make it happen only once. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: fix IP endianness in debug messageDavid Lamparter2014-06-291-1/+1
| | | | | | inet_ntop expects network byte order. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* *: nuke ^L (page feed)David Lamparter2014-06-041-5/+5
| | | | | | | | | | | | | | Quagga sources have inherited a slew of Page Feed (^L, \xC) characters from ancient history. Among other things, these break patchwork's XML-RPC API because \xC is not a valid character in XML documents. Nuke them from high orbit. Patches can be adapted simply by: sed -e 's%^L%%' -i filename.patch (you can type page feeds in some environments with Ctrl-V Ctrl-L) Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: efficient NLRI packing for AFs != ipv4-unicastPradosh Mohapatra2014-06-031-119/+130
| | | | | | | | | | | | | | | | | | | | | ISSUE: Currently, for non-ipv4-unicast address families where prefixes are encoded in MP_REACH/MP_UNREACH attributes, BGP ends up sending one prefix per UPDATE message. This is quite inefficient. The patch addresses the issue. PATCH: We introduce a scratch buffer in the peer structure that stores the MP_REACH/MP_UNREACH attributes for non-ipv4-unicast families. This enables us to encode multiple prefixes. In the end, the two buffers are merged to create the UPDATE packet. Signed-off-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com> Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com> [DL: removed no longer existing bgp_packet_withdraw prototype] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: track correct originator-id in reflected routesPradosh Mohapatra2014-05-151-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | ISSUE: Suppose route1 and route2 received from route-reflector-client1 and client2 respectively have identical attributes. The current logic of creating the adj-rib-out for a peer threads the 'adv' structures for both routes against the same attribute. This results in 'bgp_update_packet()' to pack those routes in the same UPDATE message with one attr structure formatted. The originator-id is thus set according to the first route's received router id. This is incorrect. PATCH: Fix bgp_announce_check() function to set the originator-id in the advertising attr structure. Also, fix the attribute hash function and compare function to consider originator-id. Otherwise attributes where all fields except the originator-id are identical get merged into one memory location. Signed-off-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com> Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com> Reviewed-by: Ken Yin <kyin at cumulusnetworks.com> [DL: whitespace changes dropped] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: use ATTR_FLAG_BIT() for BGP_ATTR_ valuesJorge Boncompte [DTI2]2014-05-151-4/+4
| | | | | | | | | * bgp_attr.c: this UNSET_FLAG()s are bogus. I did a quick review and I think that they could not cause any bug anyway. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Acked-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: don't try to reconcile AS4_PATH with NULLDavid Lamparter2013-02-011-0/+3
| | | | | | | | | | | | | bgp_attr_munge_as4_attrs would previously try to reintegrate an AS4_PATH with a NULL AS_PATH, leading to a rather nasty SEGV. Let's go by RFC6793 and treat missing AS_PATH as 0-length AS_PATH, which in turn means discarding the AS4_PATH. [NB: we don't actually stick to the actual rule, which is discarding AS4_PATH if it's longer than AS_PATH; indeed we should probably fix that too] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: fix a bug in bgp_attr_dupChristian Franke2013-01-141-4/+17
| | | | | | | | | | | | | | Commit 558d1fec11749d3257e improved bgp_attr_dup so it would be possible for the caller to provide attr_extra, allowing to use the stack instead of the heap for operations requiring only a short lived attr. However, this commit introduced a bug where bgp_attr_dup wouldn't copy attr_extra at all (but provide a reference to the original) if the caller provided attr_extra. Cc: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: Fixed out-of-date commentAndrew Certain2012-11-301-1/+1
| | | | | | | When going through the code to write the documentation for local-as, I discovered that one of the comments was out-of-date. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: add replace-as modifier for BGP neighborAndrew Certain2012-11-301-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added replace-as modifier for BGP neighbors when using local-as. If the replace-as modifier is specified, only the replacement AS as specified by the local-as modifier is prepended to the AS_PATH, not the process's AS. In bgp_attr.c, I decided that if (peer->change_local_as) { /* If replace-as is specified, we only use the change_local_as when advertising routes. */ if( ! CHECK_FLAG (peer->flags, PEER_FLAG_LOCAL_AS_REPLACE_AS) ) { aspath = aspath_add_seq (aspath, peer->local_as); } aspath = aspath_add_seq (aspath, peer->change_local_as); } else { aspath = aspath_add_seq (aspath, peer->local_as); } was clearer than the alternative that didn't duplicate the prepending of the process's AS: /* First, append the process local AS unless we have an alternate local_as * and we're replacing it (as opposed to just prepending it). */ if (! (peer->change_local_as && CHECK_FLAG (peer->flags, PEER_FLAG_LOCAL_AS_REPLACE_AS) ) ) { aspath = aspath_add_seq (aspath, peer->local_as); } if (peer->change_local_as) aspath = aspath_add_seq (aspath, peer->change_local_as); } But I could be convinced otherwise. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* *: use array_size() helper macroBalaji.G2012-10-251-3/+2
| | | | | | | | Use the array_size() helper macro. Replaces several instances of local macros with the same definition. Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: reduce struct attr_extra allocations/freeingJorge Boncompte [DTI2]2012-05-221-1/+5
| | | | | | | Try to use on stack structs for temporary uses. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: use on stack struct attr_extra in bgp_attr_unintern()Jorge Boncompte [DTI2]2012-05-221-2/+2
| | | | | | | Reduce memory heap fragmentation and pressure on the memory allocator. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: cleanup bgp_attr_unintern()Jorge Boncompte [DTI2]2012-05-221-11/+12
| | | | | Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: use on stack struct attr_extra on bgp_attr_aggregate_intern()Jorge Boncompte [DTI2]2012-05-221-10/+10
| | | | | | | Reduce memory heap fragmentation and pressure on the memory allocator. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: reduce attrhash_make_key() indirectionsJorge Boncompte [DTI2]2012-05-221-16/+17
| | | | | Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: remove some useless initializationsJorge Boncompte [DTI2]2012-05-221-4/+1
| | | | | | | | | * bgp_attr.c: (bgp_attr_default_intern) bgp_attr_default_set() already initializes the memory. Fixes a struct attr_extra leak. * bgp_route.c: Remove useless on stack struct initializations. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: remove calls to peer_sort() from fast-pathJorge Boncompte [DTI2]2012-05-221-16/+14
| | | | | | | | | | | | | | | | | peer_sort() it's called so much as to be annoying. In the assumption that the 'sort' of the peer doesn't change during an established session, I have changed all calls to peer_sort() in the 'fast-path' to only check the 'sort'. All the calls from the vty and such still recalculate the sort and store it in the peer. There's a lot of other calls to peer_sort() that could be changed but some maube tricky, someone more knowledgeable may try to reduce them. This hits peer_sort() from 5th out of the stadium^H^H list on a full internet table loading profiling session. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* bgpd: Fix regression in args consolidation, total should be inited from argsPaul Jakma2012-05-021-1/+1
| | | | * bgp_attr.c: (bgp_attr_unknown) total should be initialised from the args.
* bgpd: bgp_attr_flags_diagnose shouldn't assertPaul Jakma2012-03-271-1/+8
| | | | | | * bgpd/bgp_attr.c: (bgp_attr_flags_diagnose) debug code for error-handling paths probably shouldn't assert, instead it should just log that there was no problem.
* bgpd: attr_parse call to attr_malformed should deal with PROCEED error casePaul Jakma2012-03-271-8/+14
| | | | | | * bgpd/bgp_attr.c: (bgp_attr_parse) the invalid flag check call to bgp_attr_malformed is pretty useless if it doesn't actually allow for the PROCEED non-error case.
* bgpd: Fix silly mistake in bgp_attr_flag_invalidPaul Jakma2012-03-271-1/+1
| | | | | * bgp_attr.c: (bgp_attr_flag_invalid) flags is meant to be masked off with the mask variable...
* bgpd: malformed attribute error that can still proceed should fixup getpPaul Jakma2012-03-251-3/+10
| | | | | | | | | * bgp_attr.c: (bgp_attr_malformed) When a malformed attribute error can be ignored, and BGP message processing may still proceed, the stream getp should be adjusted to the end of the attribute - the caller may not have consumed all the attribute. Problem noted by Martin Winter in bug 678. Also, rename the 'startp' local to 'notify_datap', for clarity.
* bgpd: Move up flag-check calls, parcel up attr-parser args, and other cleanupsPaul Jakma2012-02-281-273/+194
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * bgp_attr.h: (struct bgp_attr_parser_args) Attribute parsing context, containing common arguments. * bgp_attr.c: (general) Move the bgp_attr_flag_invalid flag-check calls up, out of each individual attr parser function, to be done once in attr_parse. Similarly move the calculation of the 'total' attribute length field up to attr_parse. Bundle together common arguments to attr-parsing functions and helpers into (struct bgp_attr_parser_args), so it can be passed by reference down the stack & also de-clutter the argument lists & make it easier to add/modify the context for attr-parsing - add local const aliases to avoid modifying body of code too much. This also should help avoid cut & paste errors, where calls to helpers with hard-coded attribute types are pasted to other functions but the code isn't changed. (bgp_attr_flags_diagnose) as above. (bgp_attr_flag_invalid) as above. (bgp_attr_{origin,aspath,as4_path,nexthop,med,local_pref,atomic}) as above. (bgp_attr_{aggregator,as4_aggregator,community,originator_id}) as above (bgp_attr_{cluster_list,ext_communities},bgp_mp_{un,}reach_parse) as above (bgp_attr_unknown) as above. (bgp_attr_malformed) as above. Also, startp and length have to be special-cased, because whether or not to send attribute data depends on the particular error - a separate length argument, distinct from args->length, indicates whether or not the attribute data should be sent in the NOTIFY. (bgp_attr_aspath_check) Call to bgp_attr_malformed is wrong here, there is no attribute parsing context - e.g. the 'flag' argument is unlikely to be right, remove it. Explicitly handle the error instead. (bgp_attr_munge_as4_attrs) Flag argument is pointless. As the comment notes, the check here is pointless as AS_PATH presence already checked elsewhere. (bgp_attr_parse) Do bgp_attr_flag_invalid call here. Use (struct bgp_attr_parser_args) for args to attr parser functions. Remove out-of-context 'flag' argument to as4 checking functions.
* bgpd: consolidate attribute flag checksPaul Jakma2012-02-281-88/+133
| | | | | | | | | | | * bgpd/bgp_attr.c: (attr_flags_values []) array of required flags for attributes, EXTLEN & PARTIAL masked off as "dont care" as appropriate. (bgp_attr_flag_invalid) check if flags may be invalid, according to the above table & RFC rules. (bgp_attr_*) Use bgp_attr_flag_invalid. (bgp_attr_as4_aggregator) ditto, also take startp argument for the NOTIFY data. (bgp_attr_parse) pass startp to bgp_attr_as4_aggregator
* bgpd: Fix incorrect attribute type code in call to bgp_attr_malformedPaul Jakma2012-01-081-2/+2
|
* bgpd: Improve flag error messages in bgp_attr_aspathPaul Jakma2012-01-081-4/+13
| | | | | | | | * bgpd/bgp_attr.c: (bgp_attr_aspath) error message could be misleading, clearly log what flag was incorrect. (Problem noted in "bgpd: fix error message in bgp_attr_aspath()" in Quagga-RE)
* bgpd: rewrite attr flag error loggingDenis Ovsienko2012-01-081-54/+54
| | | | | | | | | | | | | | | | * bgp_attr.c * attr_flag_str: new message list * bgp_attr_flags_diagnose(): new function, implements previously added error logging in a generic way * bgp_attr_origin(): use bgp_attr_flags_diagnose() * bgp_attr_nexthop(): ditto * bgp_attr_med(): ditto * bgp_attr_local_pref(): ditto * bgp_attr_atomic(): ditto * bgp_attr_originator_id(): ditto * bgp_attr_cluster_list(): ditto * bgp_mp_reach_parse(): ditto * bgp_mp_unreach_parse(): ditto
* fix set never used warningsStephen Hemminger2011-12-181-16/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (This patch was modified to leave calls to stream_getl() in place, they are necessary for the stream's internal pointer to advance to the correct position. -- Denis) Signed-off-by: Denis Ovsienko <infrastation@yandex.ru> Fix gcc warnings about varables that are set but never used. * bgpd/bgp_attr.c * cluster_unintern(): ret * transit_unintern(): ret * bgp_attr_default_intern(): attre * bgp_mp_reach_parse(): rd_high, rd_low * bgpd/bgp_route.c * bgp_announce_check_rsclient(): bgp * bgpd/bgp_zebra.c * zebra_read_ipv4(): ifindex * zebra_read_ipv6(): ifindex * bgpd/bgpd.c * bgp_config_write_peer(): filter * lib/distribute.c * distribute_list_all(): dist * distribute_list(): dist * distribute_list_prefix_all(): dist * distribute_list_prefix(): dist * lib/if_rmap.c * if_rmap(): if_rmap * lib/vty.c * vty_accept(): vty * lib/zclient.c * zclient_read(): ret * zebra/irdp_interface.c * if_group(): zi * zebra/rt_netlink.c * kernel_read(): ret, sock
* bgpd: fix memory leak for extra attributesOleg A. Arkhangelsky2011-12-031-0/+1
| | | | this fixes commit b881c7074bb698aeb1b099175b325734fc6e44d2
* bgpd: fix 2 more cases of length error reportingDenis Ovsienko2011-10-261-2/+2
| | | | | * bgp_attr.c (bgp_attr_originator_id, bgp_attr_cluster_list): provide required arguments to bgp_attr_malformed()
* bgpd: check AGGREGATOR attr flags (BZ#678)Denis Ovsienko2011-10-221-0/+17
| | | | | * bgp_attr.c * bgp_attr_aggregator(): check Optional/Transitive flag bits
* bgpd: fix more regressions in attr flag checksDenis Ovsienko2011-10-191-4/+4
| | | | | | | | | | | Commit 05a4936b713b9882171d0f7fb20b8439df23939e fixed some of the attributes involved, but not all. This commit should do it. * bgp_attr.c * bgp_attr_originator_id() * bgp_attr_cluster_list() * bgp_mp_reach_parse() * bgp_mp_unreach_parse()
* bgpd: use bgp_attr_malformed()Denis Ovsienko2011-10-181-17/+22
| | | | | | | | | | | | | | | Some of the recent attribute flags/length checks copied from QRE use bgp_notify_send_with_data() directly, but master branch assumes using bgp_attr_malformed(). * bgp_attr.c * bgp_attr_med() * bgp_attr_local_pref() * bgp_attr_atomic() * bgp_attr_originator_id() * bgp_attr_cluster_list() * bgp_mp_reach_parse() * bgp_mp_unreach_parse()
* bgpd: add flag checks for MP_(UN)REACH_NLRIDenis Ovsienko2011-10-171-6/+36
| | | | | | | | | | * bgp_attr.[ch] * bgp_mp_reach_parse(): add extra arguments and a uniform flag check block * bgp_mp_unreach_parse(): idem * bgp_attr_parse(): provide extra arguments * bgp_mp_attr_test.c * parse_test(): justify respective calls
* bgpd: fix spelling of CLUSTER_LISTDenis Ovsienko2011-10-171-1/+1
|
* bgpd: check CLUSTER_LIST attribute flagsDenis Ovsienko2011-10-171-2/+17
| | | | | | | | * bgp_attr.c * bgp_attr_cluster_list(): accept extra argument, add checks for "optional", "transitive" and "partial" bits, log each error condition independently * bgp_attr_parse(): provide extra arguments
* bgpd: check ORIGINATOR_ID attribute flagsDenis Ovsienko2011-10-171-2/+18
| | | | | | | | * bgp_attr.c * bgp_attr_originator_id(): accept extra argument, add checks for "optional", "transitive" and "partial" bits, log each error condition independently * bgp_attr_parse(): provide extra arguments
* bgpd: fix regression in improved attr flag checksDenis Ovsienko2011-10-121-5/+5
| | | | | | | | | | | | | Commit 2febf323411c1aed9d7694898f852ce2ef36a7e5 assumed every flag bit except optional/transitive/partial unset, which at times could not be true for "extended length" bit. * bgp_attr.c * bgp_attr_origin(): exclude BGP_ATTR_FLAG_EXTLEN from comparison * bgp_attr_nexthop(): idem * bgp_attr_med(): idem * bgp_attr_local_pref(): idem * bgp_attr_atomic(): idem
* bgpd: improve attr length error handling (BZ#679)Denis Ovsienko2011-10-081-12/+19
| | | | | | | | | | | | * bgp_attr.c * bgp_attr_parse(): provide extra argument to bgp_attr_aggregator() * bgp_attr_local_pref(): use bgp_notify_send_with_data() * bgp_attr_atomic(): idem * bgp_attr_aggregator(): idem Conflicts: bgpd/bgp_attr.c
* bgpd: improve attr flags checksDenis Ovsienko2011-09-301-138/+53
| | | | | | | | | | | | | | | | | | Do not check each of the Optional/Transitive/Partial attribute flag bits, when their only valid combination is known in advance, but still perform bit-deep error message logging. This change assumes unused (low-order) 4 bits of the flag octet cleared. * bgp_attr.c * bgp_attr_origin(): rewrite check * bgp_attr_nexthop(): idem * bgp_attr_med(): idem * bgp_attr_local_pref(): idem * bgp_attr_atomic(): idem Conflicts: bgpd/bgp_attr.c
* bgpd: ignore 4 bits of attribute flags byteDenis Ovsienko2011-09-301-1/+4
|
* bgpd: add missing "partial" flag checks (BZ#676)Denis Ovsienko2011-09-301-3/+38
| | | | | | | | | | | | | | | | | ORIGIN handling function used to have "partial" bit check and recent commits added it for NEXT_HOP, MULTI_EXIT_DISC and ATOMIC_AGGREGATE cases. This commit adds "partial" check for AS_PATH and LOCAL_PREF cases, which should leave attributes 1 through 6 inclusive completely covered with attribute flags checks. * bgp_attr.c * bgp_attr_origin(): use bit-by-bit checks for better diagnostics * bgp_attr_aspath(): add flag check * bgp_attr_local_pref(): idem Conflicts: bgpd/bgp_attr.c
* bgpd: improve NEXT_HOP attribute checks (BZ#680)Denis Ovsienko2011-09-301-6/+39
| | | | | | | | | | | | * lib/prefix.h * IPV4_CLASS_DE(): new helper macro * bgp_attr.c * bgp_attr_nexthop(): add check for "partial" bit, refresh flag error reporting, explain meaning of RFC4271 section 6.3 and implement it Conflicts: bgpd/bgp_attr.c
* bgpd: more SAFI fixesDenis Ovsienko2011-09-291-4/+4
| | | | | | | | | | | | | | | | | | | | | (with resolved conflict in bgpd/bgp_packet.c) Two macros resolving to the same integer constant broke a case block and a more thorough merge of BGP_SAFI_VPNV4 and BGP_SAFI_VPNV6 was performed. * bgpd.h: MPLS-labeled VPN SAFI is AFI-independent, switch to single * macro * bgp_capability_test.c: update test data * bgp_mp_attr_test.c: idem * bgp_route.c: (bgp_maximum_prefix_overflow, bgp_table_stats_vty) update macro and check conditions (where appropriate) * bgp_packet.c: (bgp_route_refresh_send, bgp_capability_send, bgp_update_receive, bgp_route_refresh_receive): idem * bgp_open.c: (bgp_capability_vty_out, bgp_afi_safi_valid_indices, bgp_open_capability_orf, bgp_open_capability): idem * bgp_attr.c: (bgp_mp_reach_parse, bgp_packet_attribute, bgp_packet_withdraw): idem
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-12 08:35:25 +0000