summaryrefslogtreecommitdiffstats
path: root/bgpd/bgp_vty.c
Commit message (Collapse)AuthorAgeFilesLines
* Avoid creating neighbor with same address as another.Chris Hall2010-07-301-0/+3
| | | | | | | | | | | | | | | | | With bgp multiple-instance it was possible to create a neighbor in one "view" with the same addres as a neighbor in another view (or the main, unnamed view). To do so was a mistake, since (in particular) the accept() mechanism depends on finding the neighbor by its address -- so two neighbors with the same address == confusion. Attempting to create two neighbors with the same address is now treated as an error, at the command level. Also, added "-rdynamic" to the CFLAGS for gcc in configure.ac. This improves the output from the stack traceback in the event of an assert or other failure.
* Introduce "rs-in" route-maproot2010-07-281-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | All peers may be configured with an "rs-in" route-map, whether they are rsclients, or not. All routes from a given peer are passed through the "rs-in" route-map before being considered for inclusion in any rsclients RIBs. Routes pass through the "rs-in" route-map once, irrespective of the number of rsclients. An "rs-in" route-map is intended to be used to ensure that routes from a given peer are kosher, before being passed to rsclients. The "in" route-map and filters may do the same, but for the main RIB. Any route-selection type actions that the "in" route-map may do for the main RIB will probably be done in the "import" route-map for an rsclient RIB. Also: * make zfree() work for NULL items, in lib/memory.c * fix clear ip bgp .... so works when pEstablished Version change to ex03.
* Reworking of peer state handling.Chris Hall2010-07-191-34/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a reported assert() in 'no neighbor xxx'. It also fixes other issues found when reviewing and testing that. Also fixed is a reported segfault caused by prefix lists without explicit sequence numbers. Peer State ========== Tightened up the peer state handling, including: * shades of pIdle -- depending on some peer flags and the session, if any * state transitions -- particularly pEstablished -> pIdle or pClearing * handling if deleting peer and associated session * handling of PEER_DOWN_XXX -- why peer was last downed * handling of last NOTIFICATION sent/received RS Client RIBs ============== Cleared up places where RS Client RIBs were not disposed of properly when a peer's afi/safi state changed, in particular: -- when deactivating an afi/safi -- when unsetting the rs client state for an afi/safi -- when binding a peer to a group for an afi/safi In the past these issues were probably invisible, except for a slight leak of memory. With the newer code these issues triggered some asserts when closing down a peer or the entire program. Program Termination =================== Now terminates by deleting all peers -- essentially 'no neighbor' for all peers. Each time a peer is set to be deleted bm->peer_linger_count is incremented, when the peer finally is deleted, the count is decremented. So while in program_terminating state, all nexuses continue to run until the Routing Engine spots that there are no peers left to delete. Then all nexuses are shut down and the program finally terminates. To do this, when termination starts a new Routing Engine foreground task is added, which calls program_terminate_if_all_peers_deleted(). Accept() Status for Session =========================== The accept() code needs to find the session associated with the incoming IP address. Then it needs to see if can accept the incoming connection. It looks up the IP address in the Peer Index (under its Mutex). Previously: the Peer Index entry contained a pointer to the accepting connection (if any), and the session had a pointer to the Peer Index entry so that it could set/clear the accept field in that entry. Now: have removed the accept field in the Peer Index entry, and the pointer from the session to that entry. There is now an "accept" flag in the session structure -- so setting/clearing accept does not have to fiddle with any state to do with the peer. Which seems cleaner. To find the session, the accept() code goes via the Peer Index and then via the peer to find the session. This is done under the Peer Index Mutex. To support that, the Routing Engine only changes the peer->session pointer under the same Mutex. General Changes =============== 1. name changes: peer_lock -> bgp_peer_lock etc. 2. bgp_notify_send -> bgp_peer_down_error bgp_notify_send_with_data -> bgp_peer_down_error_with_data 3. name changes: bgp_peer_sIdle -> bgp_peer_pIdle etc. 4. changing int to bool 5. added "received" flag to bgp_notify structure Files Affected ============== configure.ac -- set version to 0.99.15ex02 bgpd/bgp.h -- format changes only bgpd/bgp_advertise.c -- (1) bgpd/bgp_attr.c -- (2) bgpd/bgp_common.h -- (3) bgpd/bgp_connection.c -- (4) for session->active - adding session->accept flag - removing peer index accept entry - adding bgp_connection_query_accept() bgpd/bgp_connection.h -- adding bgp_connection_query_accept() bgpd/bgp_debug.c -- (3) (5) - changed bgp_notify_print() to remove "sending" parameter and use (5) bgpd/bgp_debug.h -- changed bgp_notify_print() bgpd/bgp_fsm.c -- added TODO for NSF and for CollisionDetectEstablishedState bgpd/bgp_main.c -- (4) for various flags - added static bool program_terminating - used "mqb_priority" name instead of "1" - ignore SIGHUP and SIGTERM messages once is "program_terminating" - added program_terminate_if_all_peers_deleted() - in SIGTERM: set program_terminating and add the foreground hook. bgpd/bgp_mplsvpn.c -- (3) bgpd/bgp_msg_read.c -- (5) set the "received" flag on incoming notifications - update call of bgp_notify_print() bgpd/bgp_msg_write.c -- update call of bgp_notify_print() bgpd/bgp_network.c -- (4) bgpd/bgp_nexthop.c -- (3) bgpd/bgp_notification.c -- add "received" flag to notification structure, which is false by default. bgpd/bgp_notification.h -- add "received" flag to notification structure - add bgp_notify_set_received() - add bgp_notify_get_received() bgpd/bgp_open.c -- (2) bgpd/bgp_open_state.c -- in bgp_peer_open_state_receive(): - copy the session->hold_timer_interval and session->keepalive_timer_interval values (as negotiated by the BGP Engine) into the peer - set PEER_CAP_RESTART_RCV if have - fix typo, use: open_recv->can_preserve not: open_recv->can_g_restart bgpd/bgp_packet.c -- delete bgp_notify_send() and bgp_notify_send_with_data() - (1) (2) (3) - bgp_clear_route_normal() -> bgp_clear_routes() and now returns "completed" state. bgpd/bgp_packet.h -- delete: bgp_keepalive_send() bgp_open_send() bgp_notify_send() bgp_notify_send_with_data() bgpd/bgp_peer.c -- changed: bgp_session_has_established() bgp_session session() bgp_session_has_disabled() to void and to take session, not peer. - removed lock of session structure in bgp_session_do_event() -- was holding the lock for far longer than necessary, particularly when clearing routes ! - in bgp_session_has_established(): - lock session structure where and only where required - tidied up timer handling - in bgp_session_has_stopped(): - extend IdleHoldTime - examine notification etc to see why session came down. - invoke bgp_peer_down_notify(), which will start the process of downing the peer. - in bgp_session_has_disabled(): - removed defer_enable - removed calls to bgp_peer_stop() etc. That is done in bgp_peer_down() et all. - now if session is marked delete_me, then do that; otherwise, can enable again. - removed program_terminate_if_all_disabled(), replaced by new mechanism - in bgp_peer_stop(): - changed to void function and added nsf parameter. - sets pClearing state. - MUST now only be called when pEstablished. - removed some code to bgp_peer_reset_idle(). So... bgp_peer_stop() brings pEstablished peer to halt, while bgp_peer_reset_idle() prepares it for new session. - now passes nsf to bgp_clear_all_routes(), which returns flag to say whether task is complete or whether it continues in background. - clearing of NSF_MODE and flags moved to bgp_peer_reset_idle(). - sets pIdle state if route clearing completed - renamed peer_nsf_stop() -> bgp_peer_nsf_stop() - if is pIdle or pClearing and have NSF routes, then stops timers and clears out all the NSF routes. - added bgp_peer_clear_all_stale_routes() - added bgp_peer_shutdown() -- used when peer is downed for PEER_DOWN_USER_SHUTDOWN ! - added bgp_peer_reset_idle() -- used when peer goes pIdle or is about to enable session. - deleted bgp_peer_timers_stop() -- see bgp_peer_change_status(). - replaced bgp_peer_clearing_completed() - if pClearing, sets pIdle and enables if can - if pDeleting, unlocks peer - replaced bgp_timer_set() by bgp_peer_timers_set() -- deals in new peer states only. - renamed peer_new() -> bgp_peer_new() - renamed peer_create() -> bgp_peer_create() - added setting of PEER_STATUS_REAL_PEER - changed auto activation to reflect what actually happens. - changed bgp_session_init_new() call because it now sets peer->session. - sets timers suitable for pIdle. before any auto enable. - renamed peer_delete() -> bgp_peer_delete() - removed call of peer_nsf_stop() - added bgp_peer_down() with PEER_DOWN_NEIGHBOR_DELETE -- which does all the work of flattening an active peer, and returns it pIdle or pClearing. - if pClearing, lock the peer so that when clearing completes, it can unlock it. - sets pDeleting state, and increments bm->peer_linger_count. - tightened procedure for dealing with various references to peer -- including use of the PEER_STATUS_REAL_PEER flag. - tidied up dealing with rsclient RIBs and shared pointers to group versions of same. - removed call of bgp_timer_set(), now done in bgp_peer_change_status(). - now unregisters the peer immediately, so can register a new one before this one is completely deleted. - deletes session if it can. - moved peer_lock() & peer_unlock() from bgpd.c and renamed bgp_peer_lock() & bgp_peer_unlock() - renamed peer_free() bgp_peer_free() and made static. - peer must be pDeleting -- so have been through bgp_peer_delete() - peer->session must be NULL - decrements bm->peer_linger_count - deleted peer->clear_node_queue handling - deleted bgp_session_free() -- that's done in bgp_peer_delete() or elsewhere. - unlocked bgp at end - assert peer->session == NULL, to be sure - set peer->lock == -54321 - in bgp_peer_enable(): - recast as switch() on peer state - added bgp_peer_reset)idle() before enabling the session. - renamed bgp_peer_disable() -> bgp_peer_down() - takes PEER_DOWN_XXX argument, which drives what notification is sent, and sets the peer->last_reset status. A small number of PEER_DOWN_XXX are special. - removed the IdleHoldTimer stuff. - copies outbound notification to session. - for PEER_DOWN_NSF_CLOSE_SESSION, keep non- stale routes. - for PEER_DOWN_USER_SHUTDOWN, do bgp_peer_shutdown() - after disabling any session and doing any shutdown, proceed as per peer->status: pIdle -- flush stale routes bgp_peer_enable() pEstablished -- bgp_peer_stop() pClearing -- flush stale routes - added bgp_peer_down_notify(). - added bgp_peer_down_error(), which replaces bgp_notify_send(). - added bgp_peer_down_error_with_data(), which replaces bgp_notify_send_with_data() The "down_error" functions calculate the appropriate PEER_DOWN_XXX value, and call bgp_peer_down_notify(). - added bgp_peer_map_peer_down(), to map PEER_DOWN_XXX to a notification message. - added bgp_peer_map_notification, to map notification message to a PEER_DOWN_XXX. - renamed peer_change_status() -> bgp_peer_change_status() - do most things only if state changes. - add call to bgp_peer_reset_idle() as enter pIdle state. - at all times do bgp_peer_timer_set() - renamed peer_timers_set() -> bgp_peer_timers_set() - commoned up code for Graceful Restart and Graceful Restart Stale timers and stale routes. - changed Graceful Restart Stale time to cope if it should expire before Graceful Restart ! bgpd/bgp_peer.h -- added PEER_DOWN_XXX values and tidied up + PEER_DOWN_NULL + PEER_DOWN_UNSPECIFIED + PEER_DOWN_CONFIG_CHANGE + PEER_DOWN_AF_DEACTIVATE + PEER_DOWN_PASSWORD_CHANGE + PEER_DOWN_ALLOWAS_IN_CHANGE + PEER_DOWN_INTERFACE_DOWN + PEER_DOWN_MAX_PREFIX + PEER_DOWN_HEADER_ERROR + PEER_DOWN_OPEN_ERROR + PEER_DOWN_UPDATE_ERROR + PEER_DOWN_HOLD_TIMER + PEER_DOWN_FSM_ERROR + PEER_DOWN_DYN_CAP_ERROR - PEER_DOWN_NOTIFY_SEND (deleted) - added typedef peer_down_t - struct peer: - deleted redundant clear_node_queue - removed PEER_STATUS_ACCEPT_PEER flag - added PEER_STATUS_REAL_PEER flag - (3) - deleted bgp_peer_reenable() -- redundant - deleted bgp_peer_stop() -- now static - replaced bgp_peer_disable() by bgp_peer_down() - added bgp_peer_down_error() - added bgp_peer_down_error_with_data() - deleted peer_change_status() -- now static - renamed peer_new() -> bgp_peer_new() - renamed peer_create() -> bgp_peer_create() - renamed peer_delete() -> bgp_peer_delete() - added bgp_peer_lock() - added bgp_peer_unlock() - deleted peer_free() - deleted peer_nsf_stop() bgpd/bgp_peer_index.c -- removed accept entry from bgp_peer_index_entry structure - added explicit next_free entry to the structure - sets next_free to point at self in entries which are in use -- and checks this. - change bgp_peer_index_seek_accept() to link to session via the peer data structure, and to call bgp_connection_query_accept() under the Peer Index Mutex. - (4) for bgp_peer_index_seek_accept() bgpd/bgp_peer_index.h -- removed accept entry from bgp_peer_index_entry structure - added explicit next_free entry to the structure - (4) for bgp_peer_index_seek_accept() bgpd/bgp_route.c -- (1) (2) (3) - in bgp_process_rsclient(), bgp_process_main(), and bgp_processq_del(): - extra dasserts() - clear rn->wq_next - unlock table *after* unlock node (bug fix) - in bgp_process(), lock bgp before table. - in bgp_maximum_prefix_restart_timer(), replace call of peer_clear() by unset of flag and bgp_peer_enable() -- peer is already down. - added bgp_maximum_prefix_cancel_timer() - deleted bgp_clear_this_route() -- code now inline in only caller. - renamed bgp_clear_route_normal() -> bgp_clear_routes() - takes an "nsf" argument to invoke NSF "clearing", iff nsf set for afi/safi. Sets PEER_STATUS_NSF_WAIT if so. - returns bool "completed" if clearing has completed immediately -- ie no background work left to be done. - renamed bgp_clear_route_all() -> bgp_clear_all_routes() - takes "nsf" argument and returns "completed" as for bgp_clear_routes(). - removed call: bgp_peer_clearing_completed() - renamed bgp_clear_route_rsclient() -> bgp_clear_rsclient_rib() - deleted bgp_cleanup_routes() -- was used during termination, no longer required because termination deletes all peers. bgpd/bgp_route.h -- deleted bgp_cleanup_routes() -- program termination now deletes all peers, which implicitly cleans up all routes. - renamed: bgp_clear_route_normal() -> bgp_clear_routes() - renamed: bgp_clear_route_rsclient() -> bgp_clear_rsclient_rib() - renamed: bgp_clear_route_all() -> bgp_clear_all_routes() - added: bgp_maximum_prefix_cancel_timer() bgpd/bgp_session.c -- (3) - deleted bgp_session_defer_if_limping() - in bgp_session_init_new() - changed to void and removed session argument -- always creates a new session - peer MUST not have a session - removed Peer Index pointer stuff as Peer Index no longer has accept field - sets session->peer and locks peer - sets peer->session under Peer Index Mutex - sets session->delete_me false - sets session->accept flag false - replaced bgp_session_free() by bgp_session_delete() - changed to void function - if session is active, set the delete_me flag so session will be deleted when goes sDisabled. - make sure that session Mutex has been released by the BGP Engine before destroying it... otherwise: tears. - unhook session from peer under Peer Index mutex -- for accept() stuff. - unhook peer from session. - unlock peer. - in bgp_session_enable() - assert that peer is pIdle. - clear delete_me for completeness - clear additional fields - in bgp_session_disable() - clear session->accept - in bgp_session_is_active() - no longer interested in Peer Index stuff - deleted bgp_session_defer_if_limping() bgpd/bgp_session.h -- in bgp_session structure: - removed index_entry pointer to Peer Index - added delete_me flag - removed defer_enable flag - added accept flag - removed session parameter from bgp_session_init_new() - deleted bgp_session_free() - added bgp_session_delete() - bgp_session_is_active() now returns bool bgpd/bgp_table.c -- bgp_node_free() sets lock count = -54321 - in bgp_table_free(): - assert that route node is empty - set lock count = -54321 - bgp_node_delete() asserts that is not on_wq - (1) bgpd/bgp_vty.c -- (1) (3) (4) - change peer_af_flag_modify_vty() to call peer_af_flag_modify() not set or unset. - change name: bgp_clear_route_rsclient() -> bgp_clear_rsclient_rib() - in peer_rsclient_set_vty(): - add peer to bgp->rsclient list after all validation is complete - in peer_rsclient_unset_vty(): - removed code for deleting the rsclient RIB etc to peer_rsclient_unset(). - added peer_rsclient_unset() bgpd/bgp_zebra.c -- bgp_peer_disable() -> bgp_peer_down() and now takes PEER_DOWN_INTERFACE_DOWN argument. bgpd/bgpd.c -- (1) (3) - replaced setting peer->last_reset and call of bgp_notify_send() by call of the new bgp_peer_down(). - bgp_router_id_set() ... PEER_DOWN_RID_CHANGE - bgp_cluster_id_set() ... PEER_DOWN_CLID_CHANGE - bgp_cluster_id_unset() ... PEER_DOWN_CLID_CHANGE - bgp_confederation_id_set() ... PEER_DOWN_CONFED_ID_CHANGE ... PEER_DOWN_CONFED_ID_CHANGE - bgp_confederation_id_unset() ... PEER_DOWN_CONFED_ID_CHANGE - bgp_confederation_peers_add() ... PEER_DOWN_CONFED_PEER_CHANGE - bgp_confederation_peers_remove() ... PEER_DOWN_CONFED_PEER_CHANGE - peer_as_change() ... PEER_DOWN_REMOTE_AS_CHANGE - peer_activate() ... PEER_DOWN_AF_ACTIVATE - peer_deactivate() ... PEER_DOWN_AF_DEACTIVATE - peer_group_bind() ... PEER_DOWN_RMAP_BIND - peer_group_unbind() ... PEER_DOWN_RMAP_UNBIND - peer_change_action() ... why_changed ... why_changed - peer_flag_modify_action() ... action->peer_down - peer_update_source_if_set() ... PEER_DOWN_UPDATE_SOURCE_CHANGE ... PEER_DOWN_UPDATE_SOURCE_CHANGE - peer_update_source_addr_set() ... PEER_DOWN_UPDATE_SOURCE_CHANGE ... PEER_DOWN_UPDATE_SOURCE_CHANGE - peer_update_source_unset() ... PEER_DOWN_UPDATE_SOURCE_CHANGE ... PEER_DOWN_UPDATE_SOURCE_CHANGE - peer_local_as_set() ... PEER_DOWN_LOCAL_AS_CHANGE ... PEER_DOWN_LOCAL_AS_CHANGE - peer_local_as_unset() ... PEER_DOWN_LOCAL_AS_CHANGE ... PEER_DOWN_LOCAL_AS_CHANGE - peer_password_set() ... PEER_DOWN_PASSWORD_CHANGE ... PEER_DOWN_PASSWORD_CHANGE - peer_password_unset() ... PEER_DOWN_PASSWORD_CHANGE ... PEER_DOWN_PASSWORD_CHANGE - peer_clear() ... PEER_DOWN_USER_RESET - bgp_terminate() ... PEER_DOWN_USER_RESET - deleted peer_lock() & peer_unlock(). See bgp_peer_lock() & bgp_peer_unlock() in bgp_peer - in peer_as_change(), move downing of peer to after all config changes have been made. - in peer_remote_as() implicitly activate iff !BGP_FLAG_NO_DEFAULT and is IPv4/Unicast. (but only ever called with IPv4/Unicast or nothing at all.) - in peer_deactivate() - if cannot dynamically reconfigure, then will down the peer PEER_DOWN_AF_DEACTIVATE. - uses new peer_rsclient_unset() to tidy away any rsclient RIB etc. - in peer_change_action(): - added 'why_down' argument - replace if's by switch() - in struct peer_flag_action, updated entry types - in peer_flag_action_list[], added the appropriate PEER_DOWN_XXX values. - in peer_af_flag_action_list[] - added the appropriate PEER_DOWN_XXX values - added multiple flag entries - in peer_flag_action_set(): - changed to return const address of peer_flag_action structure -- or NULL. - table may now contain entries which the given flag must be a subset of. - in peer_flag_modify_action(): - now takes peer_flag_action* and whether flag has been set or not. - allow *only* peer_change_none or peer_change_reset - deal with clearing PEER_FLAG_SHUTDOWN, otherwise bgp_peer_down(). - in peer_group_bind(): - uses new peer_rsclient_unset() to tidy away any rsclient RIB etc. - in peer_flag_modify(): - takes bool set flag - changed to suit peer_flag_action_set() and peer_flag_modify_action() - in peer_flag_set() and peer_flag_unset() changed to bool flag - added peer_af_flag_modify_action(), common code for use in peer_af_flag_modify(). - in peer_af_flag_modify(): - takes bool set flag - changed to suit peer_flag_action_set() and peer_flag_modify_action() - use peer_af_flag_modify_action() - in peer_af_flag_set() and peer_af_flag_unset() changed to bool flag - in peer_clear(): adjust for new bgp_peer_down() mechanics. - in bgp_master_init(): account for peer_linger_count (starting at 0) - in bgp_terminate(): - removed program_terminating -- see flag now in bgp_main.c - implement "retain_mode" by using BGP_OPT_NO_FIB flag to turn off changing the FIB as routes are deleted. - either bgp_peer_delete() if terminating or bgp_peer_down() all peers. - flush process queues. - deleted program_terminate_if_all_disabled() - in peer_lookup(), removed handling of PEER_STATUS_ACCEPT_PEER(). - deleted peer_lookup_with_open(). - in bgp_config_write_family(), removed handling of PEER_STATUS_ACCEPT_PEER(). - in bgp_config_write(), removed handling of PEER_STATUS_ACCEPT_PEER(). bgpd/bgpd.h -- add peer_linger_count entry to the bgp_master structure. - remove: peer_lock(), peer_unlock() and peer_delete() - (4) for peer_af_flag_modify() - added peer_rsclient_unset() lib/plist.c -- fixed handling of prefix lists with no explicit sequence numbers. lib/qpnexus.c -- (4) for main_thread & terminate flags - change qpn_terminate() so does nothing if terminate flag is already set. lib/qpnexus.h -- (4) for main_thread & terminate flags tests/bgp_capability_test.c -- (3)
* New functions for error numbers and addresses in messages.Chris Hall2010-04-081-4/+3
| | | | | | | | Implemented less onerous ways of including descriptions of errors and IP addresses in logging and other messages. Implemented mapping of error numbers to error names, which is generally more meaningful.
* First beta releaseChris Hall2010-04-061-9/+8
| | | | | | | Various bug fixes and improvements. Running with a fair amount of debug/assert code, which must be removed at some date.
* Use vty_set_node() to change node type.Chris Hall2010-03-161-1/+1
|
* Major updateChris Hall2010-03-161-26/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bgpd/bgp_advertise.c bgpd/bgp_advertise.h The adj_in and adj_out objects are now put on a list based on the peer to whom the route belongs. The adj_in and adj_out objects also now point to the bgp_node which they are routes for. This substantially reduces the work needed to shut down a peer. bgpd/bgp_damp.c Changes to adj_in and adj_out forced small change to macros used in bgp_damp.c to manage its lists. bgpd/bgp_debug.c Replaced direct access to vty->node by the required vty_get_node(). bgpd/bgp_dump.c Changes to the names of fields in bgp_info structures. bgpd/bgp_engine.h Modified the debug and trace functions. bgpd/bgp_fsm.c Make use of sockunion2str() consistent with common usage. Improved some documentation. bgpd/bgp_main.c Use the newly extended qpn_add_hook_function() facility. bgpd/bgp_mplsvpn.c Changes to the names of fields in bgp_info structures. bgpd/bgp_msg_read.c Bug fix: correct handling of capability code length. Improvement: better casting in calculation of message length. bgpd/bgp_msg_write.c Bug fix: correct byte ordering of bgp_id in open message. bgpd/bgp_network.c Bug fix: correct handling of incoming connections. Takes advantage of improvements in sockunion.c. bgpd/bgp_nexthop.c Changes to the names of fields in bgp_info structures. bgpd/bgp_open_state.c Remove mistaken #include of memtypes.h bgpd/bgp_packet.c Improvements to handling of withdrawing routes for peers. bgpd/bgp_peer.c Tidying up the state of peers as they are enabled and disabled. Improvements to handling of withdrawing routes for peers. bgpd/bgp_peer.h Adding list bases for lists of routes originated by the peer. bgpd/bgp_peer_index.c Bug fix: correct freeing of peer indexes. bgpd/bgp_route.c Implement lists of bgp_info based in the owning peer. Adjust for name changes to bgp_info fields. Reimplemented all the clearing functions to use the lists of items that belong to the peer -- rather than searching route tables for stuff to withdraw. Changed work queue handling for added/changed routes, so that queues run through existing items, rather than having queues of auxiliary items -- lower memory overhead. bgpd/bgp_route.h Added fields to bgp_info to allow all bgp_info originated by each peer to live on lists based in the peer. And changed the name of existing fields to avoid confusion. bgpd/bgp_routemap.c Removing redundant code and fixing a memory leak. bgpd/bgp_table.h Based work queue for added/changed routes directly in the table, rather than having auxiliary structures. bgpd/bgp_vty.c Use vty_get_node() and vty_set_node() rather than direct access to the vty field. bgpd/bgpd.c Implement changes to route clearing. bgpd/bgpd.h Changes to work queue handling. lib/buffer.c Changes to allow embedded buffer structures. lib/buffer.h Moved struct buffer here so that could have embedded buffer structurs. lib/command.c Substantial tidy up and document exercise. Restructured the top level command processing and finding of descriptions and command completion. Removal of unpleasant messing around with the insides of vector structures. Movement of some command actions to vty.c. Uses uty.h to pick up the "private" functions from vty.c et al. lib/command.h Moved the "node" values to node_type.h, so that can use an enum node_type in places where cannot include command.h. lib/command_queue.c Updated to cope with the called command changing the node value. Improved handling of revoked commands, so the the command line handler does not get stuck waiting for a command to complete which has been revoked ! lib/command_queue.h Improved message format. lib/if.c Use vty_set_node(). lib/keychain.c Use vty_set_node(). new lib/keystroke.c new lib/keystroke.h New code to implement a keystroke FIFO. This moves some complexity out of the command handler. The handling of mixtures of escapes and Telnet IACs is tightened up. It would be possible to extend this to, say, UTF-8. Regularises the "stealing" of keystrokes for the "--more--" output handling... which was a bit hit and miss. new lib/list_util.c new lib/list_util.h New code to implement various forms of linked list, where the list pointers are embedded in structures. lib/log.c Changed the handling of log messages, so that all types of log output (except syslog) use the same message buffer scheme, and the message is constructed once and once only. Changes to the handling of VTY_LOCK() etc. Uses uty.h to pick up the "private" functions from vty.c et al. lib/log.h Changes to the buffering of log messages. new lib/mem_tracker.c New code to track memory allocation/deallocation, for debug purposes. lib/memory.c lib/memory.h Updated to allow the use of the mem_tracker. lib/memtypes.awk Made the memtypes into a named enum MTYPE. lib/memtypes.c Various new memory types. lib/mqueue.c lib/mqueue.h Add mqueue_finish function for close-down. lib/network.c lib/network.h Added non-blocking read_nb() and write_nb(). new lib/node_type.h As above. lib/plist.c Remove vty_puts() which wasn't a good idea. lib/qlib_init.c Added qps_init() to first stage and mqueue_finish to finish. lib/qpnexus.c lib/qpnexus.h More flexible hooks for in_thread_init and in_thread_final. lib/qpselect.c lib/qpselect.h Added qps_start_up() to build the required maps once and for all. Added qdebug to control the debug checks and validation. Improved validation and test functions. new lib/qstring.c new lib/qstring.h New code for limited flexible string handling. lib/qtimers.c Added qdebug to control the debug checks and validation. lib/routemap.c Use vty_set_node(). lib/sockunion.c lib/sockunion.h Tidied up and regularised the handling of sin_len and sin6_len. Created common function for setting port into socket. Created common function for initialisation/allocation of new sockunion. Reduced various functions by using common sub-functions. Rationalised some code. Added sockunion_listen() and sockunion_new_sockaddr(). Renamed sockunion_new() to sockunion_new_prefix(). Improved some logging messages. Added documentation. new lib/uty.h Functions etc. used only by vty/command/log/vty_io and vty_cli. lib/vector.c lib/vector.h Added vector_t type. Removed VECTOR_INDEX, vector_only_wrapper_free() and vector_only_index_free() -- following improvement of code in command.c. Added vector_set_min_length(), vector_set_new_min_length() and vector_length() functions. new lib/vio_fifo.c new lib/vio_fifo.h New code to manage simple FIFO of indefinite length. lib/vty.c lib/vty.h Reworked. Broken into vty.c, vty_io.c and vty_cli.c. new lib/vty_cli.c new lib/vty_cli.h CLI handling parts of the vty family. new lib/vty_io.c new lib/vty_io.h I/O parts of the vty family. lib/workqueue.h Introduced tyedefs for the various call-back entries. new tests/test-list_util.c Tests for the list-util stuff. vtysh/vtysh.c Small change to interface for cmd_execute_command()
* Thread safe versions of inet_ntoa and strerror.paulo2010-02-041-2/+2
|
* Use session->notification instead of peer's. Fix HUP - race condition.paulo2010-02-011-2/+3
|
* In bgp_route.c bgp_maximum_prefix_overfow arrange for peer to bepaulo2010-02-011-0/+2
| | | | | | disabled then enabled by timer. Replaced calls to bgp_peer_reenable with bgp_send_notify which updates peer->last_reset as well as reenabling peer.
* Wite route refresh received. Hive off statistics into separate struct.paulo2010-01-271-15/+22
|
* Fixed program shutdown. Added peering engine side of TTL changing.paulo2010-01-271-7/+7
| | | | | Changed names of peer states. Writed in peering engine side of sending route_refresh.
* Reduce peer FSM now that session handled elsewhere. Wire up statuspaulo2010-01-221-0/+3
| | | | changes, Idle, Established, Clearing, Deleted removed other status.
* Fix debuggery in qtimers. Check NULL notify pointer in bgp_vtypaulo2010-01-201-1/+1
|
* Knitting it all together. Still not got clean compile. Still lots ofpaulo2010-01-131-3/+5
| | | | TODOs.
* Initial commit for bgp_engine branch -- seeding new files...Chris Hall2010-01-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On branch bgp_engine modified: .gitignore modified: bgpd/Makefile.am new file: bgpd/bgp.h new file: bgpd/bgp_common.c new file: bgpd/bgp_common.h new file: bgpd/bgp_connection.c new file: bgpd/bgp_connection.h modified: bgpd/bgp_debug.c new file: bgpd/bgp_engine.c new file: bgpd/bgp_engine.h modified: bgpd/bgp_fsm.c modified: bgpd/bgp_fsm.h modified: bgpd/bgp_network.c modified: bgpd/bgp_network.h new file: bgpd/bgp_notification.c new file: bgpd/bgp_notification.h modified: bgpd/bgp_open.c new file: bgpd/bgp_open_state.c new file: bgpd/bgp_open_state.h modified: bgpd/bgp_packet.c new file: bgpd/bgp_peer.c new file: bgpd/bgp_peer.h modified: bgpd/bgp_route.c new file: bgpd/bgp_session.c new file: bgpd/bgp_session.h modified: bgpd/bgp_vty.c modified: bgpd/bgp_zebra.c modified: bgpd/bgpd.c modified: bgpd/bgpd.h modified: lib/Makefile.am modified: lib/memtypes.c modified: lib/mqueue.c modified: lib/mqueue.h new file: lib/qafi_safi.h modified: lib/qpselect.c modified: lib/qpselect.h modified: lib/qpthreads.c modified: lib/qpthreads.h modified: lib/sockopt.c modified: lib/sockunion.c modified: lib/sockunion.h modified: lib/stream.c modified: lib/stream.h modified: lib/symtab.h modified: lib/zebra.h
* Upgrade Prefix-List & BGP Community-List handlingChris Hall (GMCH)2009-11-261-306/+331
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Affects: lib/plist.c & .h and bgpd/bgp_clist.c & .h With very long prefix-lists the repeated scanning of the linked list of prefix_list_entry slowed things down (scaled O(n**2)). For lists of 10,000 or more entries this could consume several *minutes* while reading a configuration file. This is a substantial re-working of the code, making use of new facilities introduced in lib/symtab and lib/vector. The prefix-list names are held in a symbol table. The addition of entries to a prefix-list uses binary-chop searches rather than linear list scans. For bgpd, all references to prefix-lists are replaced by symbol table references. The peer_prefix_list_update function is called every time a prefix-list changes. This used to run through every possible reference to a prefix-list to see if its address needed updating. For other daemons, the old interfaces have been preserved. The prefix match code has been stream-lined a little. The BGP community-list and extcommunity-list handling has also been updated to use a symbol table to hold the names. This improves the processing of route-maps, which look-up the list by name each time it is used. (In the longer term, this should be replaced by the use of symbol references.) Other files affected: bgpd/bgpd.c & .h bgpd/bgp_route.c & .h bgpd/bgp_packet.c bgpd/bgp_vty.c updated to use prefix list references & community list symbols. symtab.c & .h small change to symbol_dec_ref & symbol_zero_ref to return NULL if reference count goes to zero, and the symbol otherwise.
* [bgpd] Restore ability of 'neighbor ... update-source' to take interface namePaul Jakma2009-07-271-2/+3
| | | | | | | * bgp_vty.c: (BGP_UPDATE_SOURCE_STR) Restore ability to accept arbitrary interface names for the 'neighbor ... update-source' command - shouldn't have been deleted. (BGP_UPDATE_SOURCE_STR) Add help for same.
* [bgpd] Stability fixes including bugs 397, 492Chris Caputo2009-07-191-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've spent the last several weeks working on stability fixes to bgpd. These patches fix all of the numerous crashes, assertion failures, memory leaks and memory stomping I could find. Valgrind was used extensively. Added new function bgp_exit() to help catch problems. If "debug bgp" is configured and bgpd exits with status of 0, statistics on remaining lib/memory.c allocations are printed to stderr. It is my hope that other developers will use this to stay on top of memory issues. Example questionable exit: bgpd: memstats: Current memory utilization in module LIB: bgpd: memstats: Link List : 6 bgpd: memstats: Link Node : 5 bgpd: memstats: Hash : 8 bgpd: memstats: Hash Bucket : 2 bgpd: memstats: Hash Index : 8 bgpd: memstats: Work queue : 3 bgpd: memstats: Work queue item : 2 bgpd: memstats: Work queue name string : 3 bgpd: memstats: Current memory utilization in module BGP: bgpd: memstats: BGP instance : 1 bgpd: memstats: BGP peer : 1 bgpd: memstats: BGP peer hostname : 1 bgpd: memstats: BGP attribute : 1 bgpd: memstats: BGP extra attributes : 1 bgpd: memstats: BGP aspath : 1 bgpd: memstats: BGP aspath str : 1 bgpd: memstats: BGP table : 24 bgpd: memstats: BGP node : 1 bgpd: memstats: BGP route : 1 bgpd: memstats: BGP synchronise : 8 bgpd: memstats: BGP Process queue : 1 bgpd: memstats: BGP node clear queue : 1 bgpd: memstats: NOTE: If configuration exists, utilization may be expected. Example clean exit: bgpd: memstats: No remaining tracked memory utilization. This patch fixes bug #397: "Invalid free in bgp_announce_check()". This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c: bgp_clear_route_node()". My apologies for not separating out these changes into individual patches. The complexity of doing so boggled what is left of my brain. I hope this is all still useful to the community. This code has been production tested, in non-route-server-client mode, on a linux 32-bit box and a 64-bit box. Release/reset functions, used by bgp_exit(), added to: bgpd/bgp_attr.c,h bgpd/bgp_community.c,h bgpd/bgp_dump.c,h bgpd/bgp_ecommunity.c,h bgpd/bgp_filter.c,h bgpd/bgp_nexthop.c,h bgpd/bgp_route.c,h lib/routemap.c,h File by file analysis: * bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released. * bgpd/bgp_attr.c: #if removed uncalled cluster_dup(). * bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from bgp_exit(). * bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and also fix memory leak. * bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees allocations made as part of bgpd initialization and, to some extent, configuration. If "debug bgp" is configured, memory stats are printed as described above. * bgpd/bgp_nexthop.c: zclient_new() already allocates stream for ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so zlookup is global so bgp_exit() can use it. * bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route() adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag. * bgpd/bgp_route.h: Correct reference counter "lock" to be signed. bgp_clear_route() now accepts a bgp_clear_route_type of either BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. * bgpd/bgp_route.c: - bgp_process_rsclient(): attr was being zero'ed and then bgp_attr_extra_free() was being called with it, even though it was never filled with valid data. - bgp_process_rsclient(): Make sure rsclient->group is not NULL before use. - bgp_processq_del(): Add call to bgp_table_unlock(). - bgp_process(): Add call to bgp_table_lock(). - bgp_update_rsclient(): memset clearing of new_attr not needed since declarationw with "= { 0 }" does it. memset was already commented out. - bgp_update_rsclient(): Fix screwed up misleading indentation. - bgp_withdraw_rsclient(): Fix screwed up misleading indentation. - bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also free struct bgp_clear_node_queue used for work item. - bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in case peer is released by peer_unlock() call. - bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use struct bgp_clear_node_queue to supply data to worker. Add call to bgp_table_lock(). - bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL. Bug 397 fixes: - bgp_default_originate() - bgp_announce_table() * bgpd/bgp_table.h: - struct bgp_table: Added reference count. Changed type of owner to be "struct peer *" rather than "void *". - struct bgp_node: Correct reference counter "lock" to be signed. * bgpd/bgp_table.c: - Added bgp_table reference counting. - bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if set. - bgp_unlock_node(): Added assertion. - bgp_node_get(): Added call to bgp_lock_node() to code path that it was missing from. * bgpd/bgp_vty.c: - peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment to owner. Handle failure gracefully. - peer_rsclient_unset_vty(): Add call to bgp_clear_route() with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. * bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it. * bgpd/bgpd.c: - peer_lock(): Allow to be called when status is "Deleted". - peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to bgp_clear_route() call. - peer_delete(): Common variable listnode pn. Fix bug in which rsclient was only dealt with if not part of a peer group. Call bgp_clear_route() for rsclient, if appropriate, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host. - peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host. - bgp_delete(): Delete peers before groups, rather than after. And then rather than deleting rsclients, verify that there are none at this point. - bgp_unlock(): Add assertion. - bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself. * lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed massive leak in install_element() in which cmd_make_descvec() was being called more than once for the same cmd->strvec/string/doc. * lib/log.c: Make closezlog() check fp before calling fclose(). * lib/memory.c: Catch when alloc count goes negative by using signed counts. Correct #endif comment. Add log_memstats_stderr(). * lib/memory.h: Add log_memstats_stderr(). * lib/thread.c: thread->funcname was being accessed in thread_call() after it had been freed. Rearranged things so that thread_call() frees funcname. Also made it so thread_master_free() cleans up cpu_record. * lib/vty.c,h: Use global command_cr. Add vty_terminate(). * lib/zclient.c,h: Re-enable zclient_free().
* [bgpd] Fix 'update-source' command: It doesn't accept interface namesPaul Jakma2009-06-221-2/+2
| | | | | | * bgp_vty.c: BGP_UPDATE_SOURCE_STR define should only specify IP addresses, the underlying mechanisms won't do anything useful with interface names. Fix bug #527.
* [cleanup] Make command nodes staticStephen Hemminger2009-06-121-7/+7
| | | | | The cmd_nodes used to configure vty, can mostly be static so (basic data hiding 101).
* [bgpd] AS4 bugfix by Chris Caputo <ccaputo@alt.net>Denis Ovsienko2009-04-301-10/+10
| | | | | | | | | * bgpd/bgp_aspath.c: (aspath_make_str_count) "assert (len < str_size)" was getting hit under certain 4-byte ASN conditions. New realloc strategy. * bgpd/bgp_aspath.c: (aspath_key_make) const warning fix. "%d" -> "%u" 4-byte ASN corrections. Prevent negative number when ASN is above 2^31.
* [bgpd] Add 'show bgp views' commandMichael Lambert2008-11-161-0/+31
| | | | | | | | * bgp_vty.c: (show_bgp_views_cmd) new command to list all defined views. (with small edits by Paul Jakma) Signed-off-by: Paul Jakma <paul@quagga.net>
* Merge branch 'restricted-mode'Paul Jakma2008-09-041-0/+30
|\
| * [vty] Add support for a 'restricted mode' with anonymous vty connectionsPaul Jakma2008-08-231-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * lib/command.h: Add a RESTRICTED_NODE, intended for use with anonymous, 'no login' vtys, to provide a subset of 'view' mode commands. * lib/command.c: Add RESTRICTED_NODE bits, nothing special, just following VIEW_NODE. * lib/vty.c: (vty_auth) enable authentication should fall back to restricted/view node as appropriate. (vty_create) init vty's to restricted/view node as appropriate, for the 'no login' case. (vty_{no_,}restricted_mode_cmd) config commands to enable 'anonymous restricted' in vty configuration. (vty_config_write) 'anonymous restricted' config. (vty_init) Install some commands to restricted mode, and the 'anonymous restricted' config commands into VTY_NODE. * bgpd/*.c: Install some of the safe(r) BGP commands into 'restricted mode', i.e. lookup commands of non-sensitive data. Useful with looking-glass route-servers.
* | Revert "[bgpd] Add 'bgp open-accept' option, to send OPEN immediately on ↵Paul Jakma2008-08-261-26/+0
|/ | | | | | | | accepted conns" Revert commit d664ae1182c29b74b409bc8594b7bd0575e91ce9. An experimental patch which violates RFC4271 quite badly, but managed to accidently sneak its way in.
* [bgpd] Add 'bgp open-accept' option, to send OPEN immediately on accepted connsPaul Jakma2008-08-221-0/+26
| | | | | | | | | | | 2007-08-31 Paul Jakma <paul.jakma@sun.com> * (general) Add 'bgp open-accept' option, to allow bgpd to send OPEN on accepted connections, i.e. to not wait till after collision-detect to send OPEN, which appears to be allowed in RFC4271. This may help speed up establishing sessions, or help avoid FSM problems with sessions to certain peers. Not enabled by default though.
* [bgpd] TCP-MD5: password vty configuration and initial Linux supportPaul Jakma2008-07-211-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2008-07-21 Paul Jakma <paul.jakma@sun.com> * bgp_packet.c: (bgp_open_receive) fix warning in a zlog call * bgp_vty.c: (bgp_vty_return) add return code * bgpd.c: (bgp_master_init) setup the socket list. * bgp_network.c: Remove the dual IPv4/6 socket thing for now, which was implemented by Michael, until such time as its clear its required for Linux (see sockopt comments). IPv6 support, including IPv4 sessions on AF_INET6 sockets, therefore is broken, and the '-l 0.0.0.0' arguments would need to be given to bgpd to make things work here. 2008-07-21 Michael H. Warfield <mhw@wittsend.com> YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Tomohiko Kusuda <kusuda@inetcore.com> Leigh Brown <leigh@solinno.co.uk> * bgp_network.c: (bgp_md5_set_one) shim between libzebra tcp-md5 sockopt and bgpd. (bgp_md5_set_socket) Helper for bgp_connect (bgp_md5_set) setup TCP-MD5SIG for the given peer. (bgp_connect) call out to bgp_md5_set_socket for the outgoing connect socket. (bgp_socket) save references to the listen sockets, needed if TCP-MD5SIG is applied later or changed. * bgp_vty.c: (*neighbor_password_cmd) New 'neighbor ... password' commands. * bgpd.c: (peer_{new,delete) manage TCP-MD5 password (peer_group2peer_config_copy) inherit TCP-MD5 password (peer_password_{un,}set) orchestrate the whole add/remove of TCP-MD5 passwords: applying checks, stopping peers, and trying to return errors to UI, etc. (bgp_config_write_peer) save password. Fix missing newline in writeout of neighbor ... port. 2008-07-21 Paul Jakma <paul.jakma@sun.com> * sockunion.c: ifdef out various places that converted v4mapped sockets to pure v4. Doesn't seem necessary at all, presumably a workaround for now historical inet_ntop bugs (?) 2008-07-21 Michael H. Warfield <mhw@wittsend.com> YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> * sockopt.{c,h}: (sockopt_tcp_signature) Add TCP-MD5SIG support.
* [vty] CMD_AS_RANGE accidently quoted and so not expanded in vtyPaul Jakma2008-07-021-47/+47
| | | | | | | 2008-07-02 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp> * *.c: CMD_AS_RANGE was being used inside command strings, and thus not being expanded, fix by dequoting.
* [bgpd] Fix double-free crash in bgp_table_finish, seen with rs-clientPaul Jakma2008-07-021-1/+1
| | | | | | | | | | | | | | 2008-07-02 Stephen Hemminger <stephen.hemminger@vyatta.com> * bgp_table.{c,h}: (bgp_table_finish) Take a double pointer and scrub pointer in caller, so fixing double-free crashes seen with route-server-client configuration. * *.c: Adjust all callers of bgp_table_finish 2008-07-02 Paul Jakma <paul.jakma@sun.com> * bgp_table.{c,h}: (bgp_node_delete, bgp_table_free) shouldn't be exported.
* [bgpd] Merge AS4 supportPaul Jakma2007-10-141-86/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2007-10-14 Paul Jakma <paul.jakma@sun.com> * NEWS: Note that MRT dumps are now version 2 * (general) Merge in Juergen Kammer's AS4 patch. 2007-09-27 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (assegment_normalise) remove duplicates from from sets. (aspath_reconcile_as4) disregard a broken part of the RFC around error handling in path reconciliation. * aspath_test.c: Test dupe-weeding from sets. Test that reconciliation merges AS_PATH and AS4_PATH where former is shorter than latter. 2007-09-26 Paul Jakma <paul.jakma@sun.com> * aspath_test.c: Test AS4_PATH reconcilation where length of AS_PATH and AS4_PATH is same. 2007-09-25 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (peek_for_as4_capability) Fix to work. * bgp_packet.c: (bgp_open_receive) Fix sanity check of as4. * tests/bgp_capability_test.c: (general) Extend tests to validate peek_for_as4_capability. Add test of full OPEN Option block, with multiple capabilities, both as a series of Option, and a single option. Add some crap to beginning of stream, to prevent code depending on getp == 0. 2007-09-18 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (bgp_capability_as4) debug printf inline with others. (peek_for_as4_capability) There's no need to signal failure, as failure is better dealt with through full capability parser - just return the AS4, simpler. * bgp_packet.c: (bgp_open_receive) Update to match peek_for_as4_capability change. Allow use of BGP_AS_TRANS by 2b speakers. Use NOTIFY_OPEN_ERR rather than CEASE for OPEN parsing errors. (bgp_capability_msg_parse) missing argument to debug print (bgp_capability_receive) missing return values. * tests/bgp_capability_test.c: (parse_test) update for changes to peek_for_as4_capability 2007-07-25 Paul Jakma <paul.jakma@sun.com> * Remove 2-byte size macros, just make existing macros take argument to indicate which size to use. Adjust all users - typically they want '1'. * bgp_aspath.c: (aspath_has_as4) New, return 1 if there are any as4's in a path. (aspath_put) Return the number of bytes actually written, to fix the bug Juergen noted: Splitting of segments will change the number of bytes written from that already written to the AS_PATH header. (aspath_snmp_pathseg) Pass 2-byte flag to aspath_put. SNMP is still defined as 2b. (aspath_aggregate) fix latent bug. (aspath_reconcile_as4) AS_PATH+NEW_AS_PATH reconciliation function. (aspath_key_make) Hash the AS_PATH string, rather than just taking the addition of assegment ASes as the hash value, hopefully sligthly more collision resistant. (bgp_attr_munge_as4_attrs) Collide the NEW_ attributes together with the OLD 2-byte forms, code Juergen had in bgp_attr_parse but re-organised a bit. (bgp_attr_parse) Bunch of code from Juergen moves to previous function. (bgp_packet_attribute) Compact significantly by just /always/ using extended-length attr header. Fix bug Juergen noted, by using aspath_put's (new) returned size value for the attr header rather than the (guesstimate) of aspath_size() - the two could differ when aspath_put had to split large segments, unlikely this bug was ever hit in the 'wild'. (bgp_dump_routes_attr) Always use extended-len and use aspath_put return for header length. Output 4b ASN for AS_PATH and AGGREGATOR. * bgp_ecommunity.c: (ecommunity_{hash_make,cmp}) fix hash callback declarations to match prototypes. (ecommunity_gettoken) Updated for ECOMMUNITY_ENCODE_AS4, complete rewrite of Juergen's changes (no asdot support) * bgp_open.c: (bgp_capability_as4) New, does what it says on the tin. (peek_for_as4_capability) Rewritten to use streams and bgp_capability_as4. * bgp_packet.c: (bgp_open_send) minor edit checked (in the abstract at least) with Juergen. Changes are to be more accepting, e.g, allow AS_TRANS on a 2-byte session. * (general) Update all commands to use CMD_AS_RANGE. * bgp_vty.c: (bgp_clear) Fix return vals to use CMD_.. Remove stuff replicated by VTY_GET_LONG (bgp_clear_vty) Return bgp_clear directly to vty. * tests/aspath_test.c: Exercise 32bit parsing. Test reconcile function. * tests/ecommunity_test.c: New, test AS4 ecommunity changes, positive test only at this time, error cases not tested yet. 2007-07-25 Juergen Kammer <j.kammer@eurodata.de> * (general) AS4 support. * bgpd.h: as_t changes to 4-bytes. * bgp_aspath.h: Add BGP_AS4_MAX and BGP_AS_TRANS defines. * bgp_aspath.c: AS_VALUE_SIZE becomes 4-byte, AS16_VALUE_SIZE added for 2-byte. Add AS16 versions of length calc macros. (aspath_count_numas) New, count number of ASes. (aspath_has_as4) New, return 1 if there are any as4's in a path. (assegments_parse) Interpret assegment as 4 or 2 byte, according to how the caller instructs us, with a new argument. (aspath_parse) Add use32bit argument to pass to assegments_parse. Adjust all its callers to pass 1, unless otherwise noted. (assegment_data_put) Adjust to be able to write 2 or 4 byte AS, according to new use32bit argument. (aspath_put) Adjust to write 2 or 4. (aspath_gettoken) Use a long for passed in asno. * bgp_attr.c: (attr_str) Add BGP_ATTR_AS4_PATH and BGP_ATTR_AS4_AGGREGATOR. (bgp_attr_aspath) Call aspath_parse with right 2/4 arg, as determined by received-capability flag. (bgp_attr_aspath_check) New, code previously in attr_aspath but moved to new func so it can be run after NEW_AS_PATH reconciliation. (bgp_attr_as4_path) New, handle NEW_AS_PATH. (bgp_attr_aggregator) Adjust to cope with 2/4 byte ASes. (bgp_attr_as4_aggregator) New, read NEW_AGGREGATOR. (bgp_attr_parse) Add handoffs to previous parsers for the two new AS4 NEW_ attributes. Various checks added for NEW/OLD reconciliation. (bgp_packet_attribute) Support 2/4 for AS_PATH and AGGREGATOR, detect when NEW_ attrs need to be sent. * bgp_debug.{c,h}: Add 'debug bgp as4'. * bgp_dump.c: MRTv2 support, unconditionally enabled, which supports AS4. Based on patches from Erik (RIPE?). * bgp_ecommunity.c: (ecommunity_ecom2str) ECOMMUNITY_ENCODE_AS4 support. * bgp_open.c: (peek_for_as4_capability) New, peek for AS4 capability prior to full capability parsing, so we know which ASN to use for struct peer lookup. (bgp_open_capability) Always send AS4 capability. * bgp_packet.c: (bgp_open_send) AS4 handling for AS field (bgp_open_receive) Peek for AS4 capability first, and figure out which AS to believe. * bgp_vty.c: (bgp_show_peer) Print AS4 cap * tests/aspath_test.c: Support asn32 changes, call aspath_parse with 16 bit. * vtysh/extract.pl: AS4 compatibility for router bgp ASNUMBER * vtysh/extract.pl.in: AS4 compatibility for router bgp ASNUMBER * vtysh/vtysh.c: AS4 compatibility for router bgp ASNUMBER
* [bgpd] cleanup, compact and consolidate capability parsing codePaul Jakma2007-08-061-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2007-07-26 Paul Jakma <paul.jakma@sun.com> * (general) Clean up and compact capability parsing slightly. Consolidate validation of length and logging of generic TLV, and memcpy of capability data, thus removing such from cap specifc code (not always present or correct). * bgp_open.h: Add structures for the generic capability TLV header and for the data formats of the various specific capabilities we support. Hence remove the badly named, or else misdefined, struct capability. * bgp_open.c: (bgp_capability_vty_out) Use struct capability_mp_data. Do the length checks *before* memcpy()'ing based on that length (stored capability - should have been validated anyway on input, but..). (bgp_afi_safi_valid_indices) new function to validate (afi,safi) which is about to be used as index into arrays, consolidates several instances of same, at least one of which appeared to be incomplete.. (bgp_capability_mp) Much condensed. (bgp_capability_orf_entry) New, process one ORF entry (bgp_capability_orf) Condensed. Fixed to process all ORF entries. (bgp_capability_restart) Condensed, and fixed to use a cap-specific type, rather than abusing capability_mp. (struct message capcode_str) added to aid generic logging. (size_t cap_minsizes[]) added to aid generic validation of capability length field. (bgp_capability_parse) Generic logging and validation of TLV consolidated here. Code compacted as much as possible. * bgp_packet.c: (bgp_open_receive) Capability parsers now use streams, so no more need here to manually fudge the input stream getp. (bgp_capability_msg_parse) use struct capability_mp_data. Validate lengths /before/ memcpy. Use bgp_afi_safi_valid_indices. (bgp_capability_receive) Exported for use by test harness. * bgp_vty.c: (bgp_show_summary) fix conversion warning (bgp_show_peer) ditto * bgp_debug.h: Fix storage 'extern' after type 'const'. * lib/log.c: (mes_lookup) warning about code not being in same-number array slot should be debug, not warning. E.g. BGP has several discontigious number spaces, allocating from different parts of a space is not uncommon (e.g. IANA assigned versus vendor-assigned code points in some number space).
* [bgpd] Trim memory usage of BGP routesPaul Jakma2007-05-041-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2007-05-03 Paul Jakma <paul.jakma@sun.com> * bgp_route.h: (struct info) Move less frequently used fields to a lazily allocated struct info_extra. Export bgp_info_extra_get * bgp_route.c: (bgp_info_extra_new) allocate extra (bgp_info_extra_free) Free damp info and the info_extra. (bgp_info_extra_get) Retrieve the info_extra of a struct info, allocating as required. (generally) adjust to use info->extra * bgp_damp.c: (generally) use bgp_info_extra_get to access dampinfo * bgp_attr.h: Move rarely allocated attributes from struct attr to a struct attr_extra, for a substantial saving in size of struct attr. * bgp_attr.c: (bgp_attr_extra_{new,free}), new, self-explanatory. (bgp_attr_extra_get) Get the attr_extra for a given struct attr, allocating it if needs be. (bgp_attr_dup) Shallow copy the struct attr and its attr_extra. (generally) adjust to know about attr->extra. * bgp_debug.c: (bgp_dump_attr) ditto * bgp_vty.c: (show_bgp_memory) print attr and info extra sizes. * bgp_nexthop.c: (generally) adjust to know about attr->extra and info->extra. * bgp_{packet,routemap,snmp,zebra}.c: ditto * lib/memtypes.c: Add MTYPE_ATTR_EXTRA and MTYPE_BGP_ROUTE_EXTRA
* [bgpd] Fix 0.99 shutdown regression, introduce Clearing and Deleted statesPaul Jakma2006-09-141-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2006-09-14 Paul Jakma <paul.jakma@sun.com> * (general) Fix some niggly issues around 'shutdown' and clearing by adding a Clearing FSM wait-state and a hidden 'Deleted' FSM state, to allow deleted peers to 'cool off' and hit 0 references. This introduces a slow memory leak of struct peer, however that's more a testament to the fragility of the reference counting than a bug in this patch, cleanup of reference counting to fix this is to follow. * bgpd.h: Add Clearing, Deleted states and Clearing_Completed and event. * bgp_debug.c: (bgp_status_msg[]) Add strings for Clearing and Deleted. * bgp_fsm.h: Don't allow timer/event threads to set anything for Deleted peers. * bgp_fsm.c: (bgp_timer_set) Add Clearing and Deleted. Deleted needs to stop everything. (bgp_stop) Remove explicit fsm_change_status call, the general framework handles the transition. (bgp_start) Log a warning if a start is attempted on a peer that should stay down, trying to start a peer. (struct .. FSM) Add Clearing_Completed events, has little influence except when in state Clearing to signal wait-state can end. Add Clearing and Deleted states, former is a wait-state, latter is a placeholder state to allow peers to disappear quietly once refcounts settle. (bgp_event) Try reduce verbosity of FSM state-change debug, changes to same state are not interesting (Established->Established) Allow NULL action functions in FSM. * bgp_packet.c: (bgp_write) Use FSM events, rather than trying to twiddle directly with FSM state behind the back of FSM. (bgp_write_notify) ditto. (bgp_read) Remove the vague ACCEPT_PEER peer_unlock, or else this patch crashes, now it leaks instead. * bgp_route.c: (bgp_clear_node_complete) Clearing_Completed event, to end clearing. (bgp_clear_route) See extensive comments. * bgpd.c: (peer_free) should only be called while in Deleted, peer refcounting controls when peer_free is called. bgp_sync_delete should be here, not in peer_delete. (peer_delete) Initiate delete. Transition to Deleted state manually. When removing peer from indices that provide visibility of it, take great care to be idempotent wrt the reference counting of struct peer through those indices. Use bgp_timer_set, rather than replicating. Call to bgp_sync_delete isn't appropriate here, sync can be referenced while shutting down and finishing deletion. (peer_group_bind) Take care to be idempotent wrt list references indexing peers.
* [bgpd] expand vty help for neighbor ... update-sourcePaul Jakma2006-05-231-4/+8
| | | | | | | 2006-05-23 Paul Jakma <paul.jakma@sun.com> * bgp_vty.c: (neighbor_update_source_cmd) Expand tab completion to make it clear it takes both address and ifname.
* [bgpd] Add 'show bgp memory' for stats on fixed-size allocations in bgpdPaul Jakma2006-03-301-19/+180
| | | | | | | | | | | | | | 2006-03-19 Paul Jakma <paul.jakma@sun.com> * bgpd/bgp_vty.c: Add includes to get several structs we want to provide usage statistics on. (show_bgp_memory_cmd) Show memory usage stats for various notable fixed size objects. Using mtype_stats_alloc and mtype_memstr recently added to memory.c. (bgp_show_summary) Report some additional stats specific to the given BGP instance and/or AFI/SAFI such as table counts, peers, rsclients and peer-groups. (bgp_vty_init) Install show_bgp_memory_cmd.
* [bgpd] Add Clrng description to bgp summary state.Paul Jakma2006-02-211-0/+2
| | | | | | | 2006-02-21 Paul Jakma <paul.jakma@sun.com> * bgp_vty.c: (bgp_show_summary) Add a 'Clrng' sub-description to state of peer while it's suppressed due to clearing.
* [bgpd] Record afi/safi in bgp_table. Serialise peer clear with FSM.Paul Jakma2006-02-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2006-02-21 Paul Jakma <paul.jakma@sun.com> * bgpd.h: move the clear_node_queue to be peer specific. Add a new peer status flag, PEER_STATUS_CLEARING. * bgp_table.h: (struct bgp_table) Add fields to record afi, safi of the table. (bgp_table_init) Take afi and safi to create table for. * bgp_table.c: (bgp_table_init) record the afi and safi. * bgp_nexthop.c: Update all calls to bgp_table_init. * bgp_vty.c: ditto. * bgpd.c: ditto. * bgp_fsm.c: (bgp_timer_set) dont bring up a session which is clearing. * bgp_route.c: (general) Update all bgp_table_init calls. (bgp_process_{rsclient,main}) clear_node is serialised via PEER_STATUS_CLEARING and fsm now. (struct bgp_clear_node_queue) can be removed. struct bgp_node can be the queue item data directly, as struct peer can be kept in the new wq global user data and afi/safi can be retrieved via bgp_node -> bgp_table. (bgp_clear_route_node) fix to get peer via wq->spec.data, afi/safi via bgp_node->bgp_table. (bgp_clear_node_queue_del) no more item data to delete, only unlock the bgp_node. (bgp_clear_node_complete) only need to unset CLEARING flag and unlock struct peer. (bgp_clear_node_queue_init) queue attaches to struct peer now. record peer name as queue name. (bgp_clear_route_table) If queue transitions to active, serialise clearing by setting PEER_STATUS_CLEARING rather than plugging process queue, and lock peer while queue active. Update to pass only bgp_node as per-queue-item specific data.
* [compiler] miscellaneous trivial compiler warning fixespaul2006-01-191-12/+4
| | | | | | | | | | | | | 2006-01-19 Paul Jakma <paul.jakma@sun.com> * (general) various miscellaneous compiler warning fixes. Remove redundant break statements from switch clauses which return. return from main, not exit, cause it annoys SOS. Remove stray semi-colons which cause empty-statement warnings. * zebra/main.c: (sighup) remove private declaration of external function.
* 2005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs2005-10-011-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * zebra.h: Declare new functions zebra_route_string() and zebra_route_char(). * log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New functions to map zebra route numbers to strings. * zebra_vty.c: (route_type_str) Remove obsolete function: use new library function zebra_route_string() instead. Note that there are a few differences: for IPv6 routes, we now get "ripng" and "ospf6" instead of the old behavior ("rip" and "ospf"). (route_type_char) Remove obsolete function: ues new library function zebra_route_char() instead. Note that there is one difference: the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route, whereas the new one returns 'X'. (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace route_type_str() with zebra_route_string(). (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char() with zebra_route_char(). * bgp_vty.c: (bgp_config_write_redistribute) Use new library function zebra_route_string instead of a local hard-coded table. * ospf6_asbr.c: Remove local hard-coded tables zroute_name and zroute_abname. Change the ZROUTE_NAME macro to use new library function zebra_route_string(). Remove the ZROUTE_ABNAME macro. (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with a call to zebra_route_char(), and be sure to fix the format string, since we now have a char instead of a char *. * ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and zebra_route_abname. Note that the zebra_route_name[] table contained mixed-case strings, whereas the zebra_route_string() function returns lower-case strings. (ospf6_zebra_read_ipv6): Change debug message to use new library function zebra_route_string() instead of zebra_route_name[]. (show_zebra): Use new library function zebra_route_string() instead of zebra_route_name[]. * ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto. (ospf_redist_string) New function implemented using new library function zebra_route_string(). Note that there are a few differences in the output that will result: the new function returns strings that are lower-case, whereas the old table was mixed case. Also, the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the new function returns "ospf6". * ospfd.h: Remove extern struct message ospf_redistributed_proto[], and add extern const char *ospf_redist_string(u_int route_type) instead. * ospf_asbr.c: (ospf_external_info_add) In two messages, use ospf_redist_string instead of LOOKUP(ospf_redistributed_proto). * ospf_vty.c: Remove local hard-coded table distribute_str. (config_write_ospf_redistribute,config_write_ospf_distribute): Use new library function zebra_route_string() instead of distribute_str[]. * ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset, ospf_redistribute_default_set,ospf_redistribute_check) In debug messages, use ospf_redist_string() instead of LOOKUP(ospf_redistributed_proto). * rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded table str[]. Replace str[] with calls to new library function zebra_route_string(). * ripd.c: Remove local hard-coded table route_info[]. (show_ip_rip) Replace uses of str[] with calls to new library functions zebra_route_char and zebra_route_string. * ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded table str[]. Replace str[i] with new library function zebra_route_string(i). * ripngd.c: Remove local hard-coded table route_info[]. (show_ipv6_ripng) Use new library function zebra_route_char() instead of table route_info[].
* 2005-09-10 Paul Jakma <paul.jakma@sun.com>paul2005-09-091-2/+2
| | | | | | * bgp_vty.c: (bgp_vty_init) gcc 4 compile fix. static function declarations shouldn't be inside functions. * bgp_dump.c: (bgp_dump_interval_add) ditto.
* 2005-08-22 Hugo Santos <hsantos@av.it.pt>paul2005-08-221-13/+105
| | | | | * bgp_vty.c: (general) Add support for BGP IPv6 Multicast SAFI commands and BGP_IPV6M_NODE.
* 2005-06-28 Paul Jakma <paul.jakma@sun.com>paul2005-06-281-65/+65
| | | | | | | | | | * (global) The great bgpd extern and static'ification. * bgp_routemap.c: remove unused ROUTE_MATCH_ASPATH_OLD code (route_set_metric_compile) fix u_int32_t to ULONG_MAX comparison warnings. * bgp_route.h: (bgp_process, bgp_withdraw, bgp_update) export these used by various files which had their own private declarations, in the case of mplsvpn - incorrect.
* 2005-06-01 Paul Jakma <paul.jakma@sun.com>post_bgp_workqueuspaul2005-06-011-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * bgpd/(general) refcount struct peer and bgp_info, hence allowing us add work_queues for bgp_process. * bgpd/bgp_route.h: (struct bgp_info) Add 'lock' field for refcount. Add bgp_info_{lock,unlock} helper functions. Add bgp_info_{add,delete} helpers, to remove need for users managing locking/freeing of bgp_info and bgp_node's. * bgpd/bgp_table.h: (struct bgp_node) Add a flags field, and BGP_NODE_PROCESS_SCHEDULED to merge redundant processing of nodes. * bgpd/bgp_fsm.h: Make the ON/OFF/ADD/REMOVE macros lock and unlock peer reference as appropriate. * bgpd/bgp_damp.c: Remove its internal prototypes for bgp_info_delete/free. Just use bgp_info_delete. * bgpd/bgpd.h: (struct bgp_master) Add work_queue pointers. (struct peer) Add reference count 'lock' (peer_lock,peer_unlock) New helpers to take/release reference on struct peer. * bgpd/bgp_advertise.c: (general) Add peer and bgp_info refcounting and balance how references are taken and released. (bgp_advertise_free) release bgp_info reference, if appropriate (bgp_adj_out_free) unlock peer (bgp_advertise_clean) leave the adv references alone, or else call bgp_advertise_free cant unlock them. (bgp_adj_out_set) lock the peer on new adj's, leave the reference alone otherwise. lock the new bgp_info reference. (bgp_adj_in_set) lock the peer reference (bgp_adj_in_remove) and unlock it here (bgp_sync_delete) make hash_free on peer conditional, just in case. * bgpd/bgp_fsm.c: (general) document that the timers depend on bgp_event to release a peer reference. (bgp_fsm_change_status) moved up the file, unchanged. (bgp_stop) Decrement peer lock as many times as cancel_event canceled - shouldnt be needed but just in case. stream_fifo_clean of obuf made conditional, just in case. (bgp_event) always unlock the peer, regardless of return value of bgp_fsm_change_status. * bgpd/bgp_packet.c: (general) change several bgp_stop's to BGP_EVENT's. (bgp_read) Add a mysterious extra peer_unlock for ACCEPT_PEERs along with a comment on it. * bgpd/bgp_route.c: (general) Add refcounting of bgp_info, cleanup some of the resource management around bgp_info. Refcount peer. Add workqueues for bgp_process and clear_table. (bgp_info_new) make static (bgp_info_free) Ditto, and unlock the peer reference. (bgp_info_lock,bgp_info_unlock) new exported functions (bgp_info_add) Add a bgp_info to a bgp_node in correct fashion, taking care of reference counts. (bgp_info_delete) do the opposite of bgp_info_add. (bgp_process_rsclient) Converted into a work_queue work function. (bgp_process_main) ditto. (bgp_processq_del) process work queue item deconstructor (bgp_process_queue_init) process work queue init (bgp_process) call init function if required, set up queue item and add to queue, rather than calling process functions directly. (bgp_rib_remove) let bgp_info_delete manage bgp_info refcounts (bgp_rib_withdraw) ditto (bgp_update_rsclient) let bgp_info_add manage refcounts (bgp_update_main) ditto (bgp_clear_route_node) clear_node_queue work function, does per-node aspects of what bgp_clear_route_table did previously (bgp_clear_node_queue_del) clear_node_queue item delete function (bgp_clear_node_complete) clear_node_queue completion function, it unplugs the process queues, which have to be blocked while clear_node_queue is being processed to prevent a race. (bgp_clear_node_queue_init) init function for clear_node_queue work queues (bgp_clear_route_table) Sets up items onto a workqueue now, rather than clearing each node directly. Plugs both process queues to avoid potential race. (bgp_static_withdraw_rsclient) let bgp_info_{add,delete} manage bgp_info refcounts. (bgp_static_update_rsclient) ditto (bgp_static_update_main) ditto (bgp_static_update_vpnv4) ditto, remove unneeded cast. (bgp_static_withdraw) see bgp_static_withdraw_rsclient (bgp_static_withdraw_vpnv4) ditto (bgp_aggregate_{route,add,delete}) ditto (bgp_redistribute_{add,delete,withdraw}) ditto * bgpd/bgp_vty.c: (peer_rsclient_set_vty) lock rsclient list peer reference (peer_rsclient_unset_vty) ditto, but unlock same reference * bgpd/bgpd.c: (peer_free) handle frees of info to be kept for lifetime of struct peer. (peer_lock,peer_unlock) peer refcount helpers (peer_new) add initial refcounts (peer_create,peer_create_accept) lock peer as appropriate (peer_delete) unlock as appropriate, move out some free's to peer_free. (peer_group_bind,peer_group_unbind) peer refcounting as appropriate. (bgp_create) check CALLOC return value. (bgp_terminate) free workqueues too. * lib/memtypes.c: Add MTYPE_BGP_PROCESS_QUEUE and MTYPE_BGP_CLEAR_NODE_QUEUE
* * bgp_vty.c: Make "exit-address-family" work in IPv4 unicast addresshasso2005-04-091-1/+2
| | | | | | family node. [backport candidate]
* * bgpd.texi: Document new "bgp bestpath as-path confed" command.hasso2005-04-081-0/+36
| | | | | | * bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable the length of confederation path segments to be included during the as-path length check in the best path decision.
* 2005-04-07 Paul Jakma <paul.jakma@sun.com>quagga_post_listloop_cleanuppaul2005-04-071-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | * (global): Fix up list loops to match changes in lib/linklist, and some basic auditing of usage. * configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES * HACKING: Add notes about deprecating interfaces and commands. * lib/linklist.h: Add usage comments. Rename getdata macro to listgetdata. Rename nextnode to listnextnode and fix its odd behaviour to be less dangerous. Make listgetdata macro assert node is not null, NULL list entries should be bug condition. ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use with for loop, Suggested by Jim Carlson of Sun. Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the "safety" of previous macro. LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to distinguish from the similarly named functions, and reflect their effect better. Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section with the old defines which were modified above, for backwards compatibility - guarded to prevent Quagga using it.. * lib/linklist.c: fix up for linklist.h changes. * ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single scan of the area list, rather than scanning all areas first for INTER_ROUTER and then again for INTER_NETWORK. According to 16.2, the scan should be area specific anyway, and further ospf6d does not seem to implement 16.3 anyway.
* * bgp_vty.c: Deprecate "neighbor transparent-as" and "neighborhasso2005-02-021-12/+12
| | | | | | transparent-nexthop" commands. [merge from GNU Zebra]
* * bgp_clist.[ch], bgp_route.c, bgp_routemap.c, bgp_vty.c:hasso2005-02-021-145/+123
| | | | | | community-list cleanup. [merge from GNU Zebra]
* * bgp_route.c, bgp_vty.c, bgp_zebra.c, bgpd.[ch]: "enforce-multihop"hasso2005-02-021-11/+30
| | | | | | -> "disable-connected-check". [merge from GNU Zebra]
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-09 07:54:52 +0000