summaryrefslogtreecommitdiffstats
path: root/lib/vty.c
Commit message (Collapse)AuthorAgeFilesLines
* Fixes to vty stuff so that zebra runs.Chris Hall2010-06-161-1/+2
| | | | | | | | | Changes to vty handling require the library to behave one way when running as part of the new (threaded) bgpd and another way when running as part of any of the other Quagga daemons. Code to revoke things from the command queue failed to test whether it was running as part of the new bgpd or not.
* Fix vty being closed while waiting on '--more--' prompt.Chris Hall2010-04-281-1/+1
| | | | | | | | | The vty_half_close() did not properly take care of the CLI state when in "cli_more_wait" state. This fix tests for cli_more_wait state in vty_half_close() and explicitly exits that state. (Instead of letting the state be cleared implicitly, which didn't quite tidy up quickly enough.)
* Removing compiler warnings.Chris Hall2010-04-161-0/+1
| | | | | | | | Removed nearly 100 compiler warnings in the various routing daemons which now clean compile. Removed one warning in vty.c, which was obscured by the other warnings. SO... this commit corrects the previous one.
* New functions for error numbers and addresses in messages.Chris Hall2010-04-081-1/+1
| | | | | | | | Implemented less onerous ways of including descriptions of errors and IP addresses in logging and other messages. Implemented mapping of error numbers to error names, which is generally more meaningful.
* First beta releaseChris Hall2010-04-061-218/+598
| | | | | | | Various bug fixes and improvements. Running with a fair amount of debug/assert code, which must be removed at some date.
* Major updateChris Hall2010-03-161-2958/+879
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bgpd/bgp_advertise.c bgpd/bgp_advertise.h The adj_in and adj_out objects are now put on a list based on the peer to whom the route belongs. The adj_in and adj_out objects also now point to the bgp_node which they are routes for. This substantially reduces the work needed to shut down a peer. bgpd/bgp_damp.c Changes to adj_in and adj_out forced small change to macros used in bgp_damp.c to manage its lists. bgpd/bgp_debug.c Replaced direct access to vty->node by the required vty_get_node(). bgpd/bgp_dump.c Changes to the names of fields in bgp_info structures. bgpd/bgp_engine.h Modified the debug and trace functions. bgpd/bgp_fsm.c Make use of sockunion2str() consistent with common usage. Improved some documentation. bgpd/bgp_main.c Use the newly extended qpn_add_hook_function() facility. bgpd/bgp_mplsvpn.c Changes to the names of fields in bgp_info structures. bgpd/bgp_msg_read.c Bug fix: correct handling of capability code length. Improvement: better casting in calculation of message length. bgpd/bgp_msg_write.c Bug fix: correct byte ordering of bgp_id in open message. bgpd/bgp_network.c Bug fix: correct handling of incoming connections. Takes advantage of improvements in sockunion.c. bgpd/bgp_nexthop.c Changes to the names of fields in bgp_info structures. bgpd/bgp_open_state.c Remove mistaken #include of memtypes.h bgpd/bgp_packet.c Improvements to handling of withdrawing routes for peers. bgpd/bgp_peer.c Tidying up the state of peers as they are enabled and disabled. Improvements to handling of withdrawing routes for peers. bgpd/bgp_peer.h Adding list bases for lists of routes originated by the peer. bgpd/bgp_peer_index.c Bug fix: correct freeing of peer indexes. bgpd/bgp_route.c Implement lists of bgp_info based in the owning peer. Adjust for name changes to bgp_info fields. Reimplemented all the clearing functions to use the lists of items that belong to the peer -- rather than searching route tables for stuff to withdraw. Changed work queue handling for added/changed routes, so that queues run through existing items, rather than having queues of auxiliary items -- lower memory overhead. bgpd/bgp_route.h Added fields to bgp_info to allow all bgp_info originated by each peer to live on lists based in the peer. And changed the name of existing fields to avoid confusion. bgpd/bgp_routemap.c Removing redundant code and fixing a memory leak. bgpd/bgp_table.h Based work queue for added/changed routes directly in the table, rather than having auxiliary structures. bgpd/bgp_vty.c Use vty_get_node() and vty_set_node() rather than direct access to the vty field. bgpd/bgpd.c Implement changes to route clearing. bgpd/bgpd.h Changes to work queue handling. lib/buffer.c Changes to allow embedded buffer structures. lib/buffer.h Moved struct buffer here so that could have embedded buffer structurs. lib/command.c Substantial tidy up and document exercise. Restructured the top level command processing and finding of descriptions and command completion. Removal of unpleasant messing around with the insides of vector structures. Movement of some command actions to vty.c. Uses uty.h to pick up the "private" functions from vty.c et al. lib/command.h Moved the "node" values to node_type.h, so that can use an enum node_type in places where cannot include command.h. lib/command_queue.c Updated to cope with the called command changing the node value. Improved handling of revoked commands, so the the command line handler does not get stuck waiting for a command to complete which has been revoked ! lib/command_queue.h Improved message format. lib/if.c Use vty_set_node(). lib/keychain.c Use vty_set_node(). new lib/keystroke.c new lib/keystroke.h New code to implement a keystroke FIFO. This moves some complexity out of the command handler. The handling of mixtures of escapes and Telnet IACs is tightened up. It would be possible to extend this to, say, UTF-8. Regularises the "stealing" of keystrokes for the "--more--" output handling... which was a bit hit and miss. new lib/list_util.c new lib/list_util.h New code to implement various forms of linked list, where the list pointers are embedded in structures. lib/log.c Changed the handling of log messages, so that all types of log output (except syslog) use the same message buffer scheme, and the message is constructed once and once only. Changes to the handling of VTY_LOCK() etc. Uses uty.h to pick up the "private" functions from vty.c et al. lib/log.h Changes to the buffering of log messages. new lib/mem_tracker.c New code to track memory allocation/deallocation, for debug purposes. lib/memory.c lib/memory.h Updated to allow the use of the mem_tracker. lib/memtypes.awk Made the memtypes into a named enum MTYPE. lib/memtypes.c Various new memory types. lib/mqueue.c lib/mqueue.h Add mqueue_finish function for close-down. lib/network.c lib/network.h Added non-blocking read_nb() and write_nb(). new lib/node_type.h As above. lib/plist.c Remove vty_puts() which wasn't a good idea. lib/qlib_init.c Added qps_init() to first stage and mqueue_finish to finish. lib/qpnexus.c lib/qpnexus.h More flexible hooks for in_thread_init and in_thread_final. lib/qpselect.c lib/qpselect.h Added qps_start_up() to build the required maps once and for all. Added qdebug to control the debug checks and validation. Improved validation and test functions. new lib/qstring.c new lib/qstring.h New code for limited flexible string handling. lib/qtimers.c Added qdebug to control the debug checks and validation. lib/routemap.c Use vty_set_node(). lib/sockunion.c lib/sockunion.h Tidied up and regularised the handling of sin_len and sin6_len. Created common function for setting port into socket. Created common function for initialisation/allocation of new sockunion. Reduced various functions by using common sub-functions. Rationalised some code. Added sockunion_listen() and sockunion_new_sockaddr(). Renamed sockunion_new() to sockunion_new_prefix(). Improved some logging messages. Added documentation. new lib/uty.h Functions etc. used only by vty/command/log/vty_io and vty_cli. lib/vector.c lib/vector.h Added vector_t type. Removed VECTOR_INDEX, vector_only_wrapper_free() and vector_only_index_free() -- following improvement of code in command.c. Added vector_set_min_length(), vector_set_new_min_length() and vector_length() functions. new lib/vio_fifo.c new lib/vio_fifo.h New code to manage simple FIFO of indefinite length. lib/vty.c lib/vty.h Reworked. Broken into vty.c, vty_io.c and vty_cli.c. new lib/vty_cli.c new lib/vty_cli.h CLI handling parts of the vty family. new lib/vty_io.c new lib/vty_io.h I/O parts of the vty family. lib/workqueue.h Introduced tyedefs for the various call-back entries. new tests/test-list_util.c Tests for the list-util stuff. vtysh/vtysh.c Small change to interface for cmd_execute_command()
* Getting BGP Engine to start and removing warnings.Chris Hall2010-01-241-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Finish the wiring required to get bgp_msg_read to process OPEN messages into the connection's open_state, and be able to check for correct peer AS, etc. Removed bugs preventing messages from being written. Added BGP Id check to collision detection logic. Removed as many warnings from comilation as possible. Replaced horrible FIFO kludge in the process. (Introduced the even more horrible miyagi kludge.) modified: bgpd/bgp_advertise.c modified: bgpd/bgp_advertise.h modified: bgpd/bgp_connection.c modified: bgpd/bgp_connection.h modified: bgpd/bgp_debug.c modified: bgpd/bgp_fsm.c modified: bgpd/bgp_msg_read.c modified: bgpd/bgp_msg_write.c modified: bgpd/bgp_network.c modified: bgpd/bgp_nexthop.c modified: bgpd/bgp_notification.c modified: bgpd/bgp_open.c modified: bgpd/bgp_packet.c modified: bgpd/bgp_session.c modified: bgpd/bgp_session.h modified: bgpd/bgpd.c modified: lib/Makefile.am modified: lib/distribute.c modified: lib/if_rmap.c new file: lib/miyagi.h modified: lib/prefix.h modified: lib/sockopt.c modified: lib/stream.c modified: lib/thread.c modified: lib/vty.c modified: lib/zebra.h modified: tests/bgp_capability_test.c modified: tests/bgp_mp_attr_test.c modified: tests/ecommunity_test.c modified: tests/heavy-thread.c modified: tests/heavy-wq.c modified: tests/heavy.c modified: tests/main.c modified: tests/test-checksum.c modified: tests/test-sig.c modified: watchquagga/watchquagga.c modified: zebra/if_netlink.c modified: zebra/ioctl.c modified: zebra/rt_netlink.c modified: zebra/rtread_netlink.c
* Fix "write file" command so reports "threaded". Working on Shutdown andpaulo2010-01-221-8/+12
| | | | | | HUP. Shutdown needs mechanism to know when bgp_engine has closed everything. HUP don't understand how it is supposed to cope with added/ deleted/retained peers and get them going again.
* Fixes to get 3 threads working. Fixes to get threaded command working.paulo2010-01-211-3/+14
| | | | | | Removed some of the temporary debuggery in qtimers that only worked in 1 thread. Initialised the mqueue mutex. Stopped peer_index from zeroizing its mutex after it had been initialized.
* Wired in nexus for bgp_ routing_ and cli_ such that if not usingpaulo2010-01-181-4/+4
| | | | | pthreads then all point at same nexus object. Do necessary in-thread initialization and finalization. Fix some minor warnings.
* Set socket non-blocking prior to listen(). Changed to recursivepaulo2010-01-041-7/+27
| | | | mutex so that can call zlog from anywhere.
* QDEBUG handling. Debug banner on stderr, vty and log file. Annoucepaulo2009-12-181-1/+38
| | | | | before and after reading config file. Announce on all vty when shutting down.
* Use static mutexespaulo2009-12-171-8/+7
|
* Get CLI thread and UI working properly. Sex commands according topaulo2009-12-151-48/+162
| | | | thread to run in. Add qlib_init stuff. Add -t parameter for "threaded".
* Using message queue to send commands from cli thread to bgp thread.paulo2009-12-141-3/+12
|
* vty running in main thread. bgp running in its own thread.paulo2009-12-111-21/+9
| | | | Each has its own nexus.
* Needed unprotected version of vty_reset for use in vty_terminatepaulo2009-12-101-4/+10
|
* Stop recursive lock checking assertpaulo2009-12-101-58/+61
|
* Merge remote branch 'quagga/master' of /git/quagga.euro-ix into pthreadsChris Hall (GMCH)2009-12-091-0/+6
|\
| * lib: log source of vty connections (bug #566)heasley2009-12-071-0/+6
| | | | | | | | heasley: I've used this for a while to track usage.
* | Ensure all timeouts are timeout times in qtime_mono_t.Chris Hall (GMCH)2009-12-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduced separate types for qtime_mono_t and qtime_real_t, to distinguish the time base of a given value. Revised all users of timeouts so that they are all expressed as qtime_mono_t values, so are all Quagga monotonic time based. Revised qpt_cond_timedwait() so that all condition variables use the same timebase (CLOCK_MONOTONIC if available, by default). Now all timeout times are qtime_mono_t, and are converted to whatever the condition variable is set to, if necessary. Added explicit timeout to mqueue. Fixed qps_pselect() to zeroise result vectors if no fds are reported pending -- seems the O/S does not do this.
* | Fixed -ve return from qps_pselect. Fixed calls of qps_enable_mode - usespaulo2009-12-091-6/+6
| | | | | | | | mnum, not mbits.
* | Fix timeouts in nexus, fix LOCK in vtypaulo2009-12-091-2/+2
| |
* | Fixes to get as far as creating the thread and calling qps_pselectpaulo2009-12-091-27/+24
| |
* | Wired up the CLI thread with new qpnexus type. Still work in progress.paulo2009-12-081-77/+339
| | | | | | | | Needs debugging.
* | Make vty and log thread safe under single mutex.paulo2009-12-071-119/+382
| |
* | Make logging (lib.c) and privileges (privs.c) pthread safepaulo2009-11-301-4/+1
| | | | | | | | | | | | | | | | | | | | | | lib.c: use a mutex to protect all public methods. Replaced code in command.c etc that modified zlog_default directly with interlocked getters and setters. Requires that vty_log in vty.c handles its own pthread safety TBA. privs.c: use a mutex to protect all public methods. Counts RAISE and LOWER so that privilege stays RAISED until all pthreads have lowered. Improved messages in test-privs.c
* | Add functions to lib/vty.c & .hChris Hall (GMCH)2009-11-241-2/+23
| | | | | | | | | | | | | | | | | | Added: vty_puts -- output string vty_out_newline -- output newline of appropriate form vty_out_indent -- output given number of spaces Made (vty == NULL) a synonym for VTY_TERM, for vty_out and related functions.
* | Upgrade lib/vector.c & .hChris Hall (GMCH)2009-11-241-61/+61
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This upgrade maintains the existing vector operations, but changes the underlying mechanisms. It then adds a number of new functions, extending the operations on vectors. The "struct vector" is redefined, which affects only some code in lib/command.c -- which pokes around inside what should be treated as a private data structure. Pro tem this is supported by a macro. The constant VECTOR_MIN_SIZE has been removed -- if there is a minimum size that should be enforced by the vector code. New functions include: vector_insert_item -- insert item, moving existing items vector_move_item -- move item from place to place in vector vector_delete_item -- delete item and close up gap vector_reverse -- reverse order of vector vector_push_item -- simple push vector_pop_item -- simple pop vector_insert -- insert 1 or more NULL items, moving existing items vector_delete -- delete 1 or more items and close up gap vector_bsearch -- perform binary search on vector vector_sort -- qsort vector vector_copy_here -- make copy of body of vector vector_move_here -- move body of vector vector_copy_append -- append copy of vector to end of another vector_move_append -- move body of vector to the end of another vector_copy_extract -- copy part of one vector to another vector_move_extract -- move part of one vector to another vector_copy_splice -- copy part of one vector to replace part of another, taking a copy of the replaced part vector_move_splice -- move part of one vector to replace part of another, taking a copy of the replaced part vector_copy_replace -- copy part of one vector to replace part of another vector_move_replace -- move part of one vector to replace part of another vector_discard -- discard body of vector vector_chop -- discard any unused memory in body of vector vector_decant -- decant vector to new body Other files affected: command.c: -- removal of VECTOR_MIN_SIZE -- use of vector_sort() -- use of VECTOR_INDEX to poke around inside vector (removing this is TODO) memtypes.c & memory.c -- updating names and comments for vectors vty.c -- removal of VECTOR_MIN_SIZE memory.h -- added SIZE(t,n) macro -- (sizeof(t) * (n))
* [bgpd] Stability fixes including bugs 397, 492Chris Caputo2009-07-191-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've spent the last several weeks working on stability fixes to bgpd. These patches fix all of the numerous crashes, assertion failures, memory leaks and memory stomping I could find. Valgrind was used extensively. Added new function bgp_exit() to help catch problems. If "debug bgp" is configured and bgpd exits with status of 0, statistics on remaining lib/memory.c allocations are printed to stderr. It is my hope that other developers will use this to stay on top of memory issues. Example questionable exit: bgpd: memstats: Current memory utilization in module LIB: bgpd: memstats: Link List : 6 bgpd: memstats: Link Node : 5 bgpd: memstats: Hash : 8 bgpd: memstats: Hash Bucket : 2 bgpd: memstats: Hash Index : 8 bgpd: memstats: Work queue : 3 bgpd: memstats: Work queue item : 2 bgpd: memstats: Work queue name string : 3 bgpd: memstats: Current memory utilization in module BGP: bgpd: memstats: BGP instance : 1 bgpd: memstats: BGP peer : 1 bgpd: memstats: BGP peer hostname : 1 bgpd: memstats: BGP attribute : 1 bgpd: memstats: BGP extra attributes : 1 bgpd: memstats: BGP aspath : 1 bgpd: memstats: BGP aspath str : 1 bgpd: memstats: BGP table : 24 bgpd: memstats: BGP node : 1 bgpd: memstats: BGP route : 1 bgpd: memstats: BGP synchronise : 8 bgpd: memstats: BGP Process queue : 1 bgpd: memstats: BGP node clear queue : 1 bgpd: memstats: NOTE: If configuration exists, utilization may be expected. Example clean exit: bgpd: memstats: No remaining tracked memory utilization. This patch fixes bug #397: "Invalid free in bgp_announce_check()". This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c: bgp_clear_route_node()". My apologies for not separating out these changes into individual patches. The complexity of doing so boggled what is left of my brain. I hope this is all still useful to the community. This code has been production tested, in non-route-server-client mode, on a linux 32-bit box and a 64-bit box. Release/reset functions, used by bgp_exit(), added to: bgpd/bgp_attr.c,h bgpd/bgp_community.c,h bgpd/bgp_dump.c,h bgpd/bgp_ecommunity.c,h bgpd/bgp_filter.c,h bgpd/bgp_nexthop.c,h bgpd/bgp_route.c,h lib/routemap.c,h File by file analysis: * bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released. * bgpd/bgp_attr.c: #if removed uncalled cluster_dup(). * bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from bgp_exit(). * bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and also fix memory leak. * bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees allocations made as part of bgpd initialization and, to some extent, configuration. If "debug bgp" is configured, memory stats are printed as described above. * bgpd/bgp_nexthop.c: zclient_new() already allocates stream for ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so zlookup is global so bgp_exit() can use it. * bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route() adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag. * bgpd/bgp_route.h: Correct reference counter "lock" to be signed. bgp_clear_route() now accepts a bgp_clear_route_type of either BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. * bgpd/bgp_route.c: - bgp_process_rsclient(): attr was being zero'ed and then bgp_attr_extra_free() was being called with it, even though it was never filled with valid data. - bgp_process_rsclient(): Make sure rsclient->group is not NULL before use. - bgp_processq_del(): Add call to bgp_table_unlock(). - bgp_process(): Add call to bgp_table_lock(). - bgp_update_rsclient(): memset clearing of new_attr not needed since declarationw with "= { 0 }" does it. memset was already commented out. - bgp_update_rsclient(): Fix screwed up misleading indentation. - bgp_withdraw_rsclient(): Fix screwed up misleading indentation. - bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also free struct bgp_clear_node_queue used for work item. - bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in case peer is released by peer_unlock() call. - bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use struct bgp_clear_node_queue to supply data to worker. Add call to bgp_table_lock(). - bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL. Bug 397 fixes: - bgp_default_originate() - bgp_announce_table() * bgpd/bgp_table.h: - struct bgp_table: Added reference count. Changed type of owner to be "struct peer *" rather than "void *". - struct bgp_node: Correct reference counter "lock" to be signed. * bgpd/bgp_table.c: - Added bgp_table reference counting. - bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if set. - bgp_unlock_node(): Added assertion. - bgp_node_get(): Added call to bgp_lock_node() to code path that it was missing from. * bgpd/bgp_vty.c: - peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment to owner. Handle failure gracefully. - peer_rsclient_unset_vty(): Add call to bgp_clear_route() with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. * bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it. * bgpd/bgpd.c: - peer_lock(): Allow to be called when status is "Deleted". - peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to bgp_clear_route() call. - peer_delete(): Common variable listnode pn. Fix bug in which rsclient was only dealt with if not part of a peer group. Call bgp_clear_route() for rsclient, if appropriate, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host. - peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host. - bgp_delete(): Delete peers before groups, rather than after. And then rather than deleting rsclients, verify that there are none at this point. - bgp_unlock(): Add assertion. - bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself. * lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed massive leak in install_element() in which cmd_make_descvec() was being called more than once for the same cmd->strvec/string/doc. * lib/log.c: Make closezlog() check fp before calling fclose(). * lib/memory.c: Catch when alloc count goes negative by using signed counts. Correct #endif comment. Add log_memstats_stderr(). * lib/memory.h: Add log_memstats_stderr(). * lib/thread.c: thread->funcname was being accessed in thread_call() after it had been freed. Rearranged things so that thread_call() frees funcname. Also made it so thread_master_free() cleans up cpu_record. * lib/vty.c,h: Use global command_cr. Add vty_terminate(). * lib/zclient.c,h: Re-enable zclient_free().
* [vty] Add support for a 'restricted mode' with anonymous vty connectionsPaul Jakma2008-08-231-3/+43
| | | | | | | | | | | | | | | | | | | | * lib/command.h: Add a RESTRICTED_NODE, intended for use with anonymous, 'no login' vtys, to provide a subset of 'view' mode commands. * lib/command.c: Add RESTRICTED_NODE bits, nothing special, just following VIEW_NODE. * lib/vty.c: (vty_auth) enable authentication should fall back to restricted/view node as appropriate. (vty_create) init vty's to restricted/view node as appropriate, for the 'no login' case. (vty_{no_,}restricted_mode_cmd) config commands to enable 'anonymous restricted' in vty configuration. (vty_config_write) 'anonymous restricted' config. (vty_init) Install some commands to restricted mode, and the 'anonymous restricted' config commands into VTY_NODE. * bgpd/*.c: Install some of the safe(r) BGP commands into 'restricted mode', i.e. lookup commands of non-sensitive data. Useful with looking-glass route-servers.
* [vty] Allow delete during password entryRoy2008-08-221-3/+3
| | | | | | | | | 2008-08-13 roy <quagga@de.vio.us> * lib/vty.c: (vty_delete_char) move check for authentication down a bit, so we do the delete, but still not re-write of line. Signed-off-by: Paul Jakma <paul@quagga.net>
* [autoconf] bugs 162,303,178: Fix 'present but can not be compiled' warningsPaul Jakma2007-05-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | 2007-05-09 Paul Jakma <paul.jakma@sun.com> * configure.ac: sys/conf.h depends on sys/param.h, at least on FBSD 6.2. (bug #363) Should check for in_pktinfo for IRDP 2006-05-27 Paul Jakma <paul.jakma@sun.com> * configure.ac: General cleanup of header and type checks, introducing an internal define, QUAGGA_INCLUDES, to build up a list of stuff to include so as to avoid 'present but cant be compiled' warnings. Misc additional checks of things missing according to autoscan. Add LIBM, for bgpd's use of libm, so as to avoid burdening LIBS, and all the binaries, with libm linkage. Remove the bad practice of using m4 changequote(), just quote the []'s in the case statements properly. This should fix bugs 162, 303 and 178. * */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN, * bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
* [logging] Add new "log timestamp precision" command for subsecond timestampsAndrew J. Schorr2007-04-281-19/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2007-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * command.c: (config_write_host) Save "log timestamp precision" if not default value. (show_logging) Show configured timestamp precision. (config_log_timestamp_precision) Enable configuration of timestamp precision. (no_config_log_timestamp_precision) Restore default timestamp precision. (cmd_init) Install new timestamp precision commands. * log.h: (struct zlog) New timestamp_precision field. (quagga_timestamp) New function to generate a timestamp with the desired precision. (struct timestamp_control) Declare a structure for use in avoiding repeated duplicate calls to quagga_timestamp. * log.c: (quagga_timestamp) New function to generate a timestamp of the desired precision. (time_print) Call quagga_timestamp if the time hasn't already been calculated. (vzlog) Initialize a timestamp_control structure and pass it to time_print and vty_log. (zlog_backtrace) Fix 64-bit problem: cannot print size_t with %u. * vty.h: Must now include "log.h". (vty_log) Takes an additional struct timestamp_control argument. * vty.c: (vty_log_out) Use new struct timestamp_control and new quagga_timestamp function to print timestamps of the desired precision. (vty_time_print) Use new quagga_timestamp function. (vty_log) Accept new struct timestamp_control argument and pass it down to vty_log_out.
* [lib] Do not call vty_close in vty_log_out to avoid possible free memory accessAndrew J. Schorr2006-07-111-2/+8
| | | | | | | | | 2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vty.c: (vty_log_out) Do not call vty_close, because this could result in a parent function's accessing the freed memory. Instead, set status VTY_CLOSE and call shutdown(vty->fd, SHUT_RDWR). And add a comment on vty_close.
* [lib] Fix infinite recursion for errors on vtys with terminal monitor enabledAndrew J. Schorr2006-07-101-0/+5
| | | | | | | | | | 2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vty.c: (vty_log_out, vty_read, vty_flush, vtysh_flush, vtysh_read) After an I/O error, must set vty->monitor to 0 before calling zlog_warn, otherwise an infinite recursion could occur (since zlog_warn triggers a message to be written to the vty, and that in turn triggers another error message when it fails, etc.).
* [debug] Debug messages to terminal vty sessions should include timestampsAndrew J. Schorr2006-07-031-3/+9
| | | | | | | 2006-07-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vty.c: (vty_log_out) Debug messages to terminal vty sessions should include timestamps.
* [lib] vty_log shouldn't crash if called when vty isn't initiliasedPaul Jakma2006-05-281-0/+7
| | | | | | | 2006-05-28 Paul Jakma <paul.jakma@sun.com> * vty.c: (vty_log/vty_log_fixed) dont crash if called when vty hasn't been initiliased.
* [lib] CID #39, Fix the vty completion leak-fix to only free when desiredPaul Jakma2006-05-151-1/+2
| | | | | | | | 2006-05-13 Paul Jakma <paul.jakma@sun.com> * vty.c: (vty_describe_command) CID #39 fix was too hasty, just cause it /can/ leak doesn't mean it always will have, check first.
* [lib] CID #39, fix leak in error path, vty_describe_commandPaul Jakma2006-05-121-8/+3
| | | | | | | 2006-05-12 Paul Jakma <paul.jakma@sun.com> * vty.c: (vty_describe_command) fix leak of describe vector in error path, CID #39.
* [lib/vty] Add 'no terminal monitor' aliaspaul2006-01-171-0/+8
| | | | | | | | | 2006-01-17 Paul Jakma <paul.jakma@sun.com> * vty.c: (no_terminal_monitor_cmd) New ALIAS for terminal_no_monitor, in the more normal negating format, to be kind to my fingers. (vty_init) install new ALIAS.
* 2005-12-29 Greg Troxel <gdt@fnord.ir.bbn.com>gdt2005-12-291-1/+1
| | | | | | * vty.c (vty_hello): add cast to quiet lint (from David Young) (patch-lint)
* 2005-10-26 Paul Jakma <paul.jakma@sun.com>paul2005-10-261-3/+8
| | | | | | | | * command.c: Use MTYPE_HOST, MTYPE_STRVEC. Some other fixups, including fixing some likely leaks in config_write_file. * vty.c: memory macro usage fixes. (vty_read_config) fix leak where relative config file is specified.
* 2005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent2005-09-291-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | * lib/filer.c: show protocol name in filter_show() * lib/plist.c: show protocol name in vty_show_prefix_entry() * routemap.c: show protocol name in vty_show_route_map_entry() * lib/vty.c: in vty_command(), show protocol name if command unknown * zebra/zserv.c: Always provide distance fo route add * ripd/rip_snmp.c: rip2IfConfReceive() sends values in conformance with RFC. Also PeerDomain is now set to a STRING type. * ripd/ripd.h: rip_redistribute_add() API includes metric and distance * ripd/ripd.c: rip_redistribute_add() API i.e. stores metric and distance Now allows a RIP-route to overcome a redistributed route coming from a protocol with worse (higher) administrative distance Metrics from redistribution are shown in show ip rip * ripd/rip_zebra.c: adapt to the rip_redistribute_add() API, i.e. provide distance and metric * ripd/rip_interface.c: adapt to the rip_redistribute_add() API * ripd/rip_routemap.c: no RMAP_COMPILE_ERROR on (metric > 16) usage rather a CMD_WARNING, because set metric ius shared with other protocols using larger values (such as OSPF) The match metric action takes first external metric if present (from redistribution) then RIP metric.
* 2005-08-22 Hugo Santos <hsantos@av.it.pt>paul2005-08-221-0/+1
| | | | | | | * command.h: (enum node_type) Add BGP_IPV6M_NODE * command.c: (node_parent) Handle BGP_IPV6M_NODE node (config_exit, config_end) ditto * vty.c: (vty_end_config) Handle BGP_IPV6M_NODE node
* 2005-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs2005-04-281-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add wall-clock timing statistics to 'show thread cpu' output. * thread.h: Define struct rusage_t to contain wall-clock time and cpu time. Change GETRUSAGE macro to collect both pieces of data. Make appropriate changes to struct cpu_thread_history to track CPU time and real time. Change proto for thread_consumed_time to return real and cpu time elapsed. And declare a new global variable 'struct timeval recent_time'. * thread.c (struct timeval recent_time): New global timestamp variable. (timeval_adjust): If timeout is negative, set to 0 (not 10 microseconds). And remove upper bound of 1,000,000 seconds, since this does not seem to make any sense (and it breaks funcname_thread_add_timer_timeval). (timeval_cmp): Should return long, not int. (vty_out_cpu_thread_history): Show CPU time and real time. (cpu_record_hash_print): Calculate totals for CPU and real time. (cpu_record_print): Change 'show thread cpu' title to show CPU and real time. (thread_timer_remain_second): Put current time in global recent_time. (funcname_thread_add_timer_timeval): Fix assert. Replace 2-case switch assignment with a ternary expression. Use global recent_time variable. Fix use of timeval_adjust (previously, the value was not actually being adjusted). (thread_cancel): Add missing "break" statement in case THREAD_BACKGROUND. (thread_timer_wait): Use global recent_time value instead of calling gettimeofday. And there's no need to check for negative timeouts, since timeval_subtract already sets these to zero. (thread_timer_process): Timers are sorted, so bail out once we encounter a timer that has not yet popped. And remove some extraneous asserts. (thread_fetch): Do not process foreground timers before calling select. Instead, add them to the ready list just after the select. Also, no need to maintain a count of the number of ready threads, since we don't care how many there are, just whether there's one at the head of the ready list (which is easily checked). Stick current time in global variable recent_time to reduce the number of calls to gettimeofday. Tighten logic for calculating the select timeout. (thread_consumed_time): Now returns real time and puts the elapsed cpu time in an additional argument. (thread_should_yield): Use real (wall-clock) time to decide whether to yield. (thread_call): Maintain CPU and real time statistics. * vty.c (vty_command): For slow commands, show real and cpu time.
* 2005-04-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs2005-04-161-0/+17
| | | | | | | | | | | | | | | | | | | * configure.ac: Added AC_ARG_ENABLE(time-check). By default, warning messages will now be printed for threads or commands that take longer than 5 seconds, but this configure argument can be used to disable the checks or change the threshold. * thread.h (thread_consumed_time): Declare new function to calculate elapsed microseconds. * thread.c (thread_consumed_time): Must be global not static so we can call it from lib/vty.c:vty_command. (thread_should_yield): Surround with `#if 0' to make clear that this function is not currently being used anywhere. (thread_call): If CONSUMED_TIME_CHECK is defined, print a CPU HOG warning message if the thread takes more than CONSUMED_TIME_CHECK microseconds. * vty.c (vty_command): If CONSUMED_TIME_CHECK is defined, print a CPU HOG warning message if the command takes more than CONSUMED_TIME_CHECK microseconds.
* 2005-04-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs2005-04-081-2/+2
| | | | | | * vty.c: (vty_log_fixed) Use casts to (void *) to try to eliminate compiler warnings when assigning a (const char *) value to struct iovec iov_base.
* 2004-04-05 Paul Jakma <paul@dishone.st>paul2005-04-051-2/+8
| | | | | | | * lib/vty.c: Improve logging of failures to open vty socket(s). See bugid #163. * zebra/zserv.c: print more helpful errors when we fail to successfully bind and listen on zserv socket. Closes bugzilla #163.
* 2005-03-14 Paul Jakma <paul.jakma@sun.com>paul2005-03-141-7/+7
| | | | | | | | | | * (global) update all c files to match the lib/vector.h rename of (struct vector).active to max, and vector_max macro to vector_active. * lib/vector.h: Rename to (struct vector).max to slightly less confusing active, for the number of active slots, distinct from allocated or active-and-not-empty. Rename vector_max to vector_active for same reason.
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-04 16:59:00 +0000