summaryrefslogtreecommitdiffstats
path: root/ripngd/ripngd.c
Commit message (Collapse)AuthorAgeFilesLines
* zebra, ripngd: remove ::/64 special-casingDavid Lamparter2015-02-141-18/+0
| | | | | | | | | | | | | | | | | In the 90ies, IPv4 was believed to exist within IPv6, with some kernels implementing this belief in code... Our code here is keyed to "#ifdef LINUX", yet no Linux from the past 10 years had this, making the code completely useless. FreeBSD 10.0 does in fact have a "::/96 via ::1 dev lo0 reject" route. IMHO we shouldn't mess with that, the admin can filter as neccessary anyway. Signed-off-by: David Lamparter <equinox@opensourcerouting.org> Acked-by: Greg Troxel <gdt@ir.bbn.com> Acked-by: Feng Lu <lu.feng@6wind.com> [DL: slightly adjusted commit message to remove misunderstanding] Acked-by: Paul Jakma <paul@jakma.org>
* build: remove INRIA, NRL and MUSICA IPv6 quirksDavid Lamparter2015-02-141-4/+4
| | | | | | | | | Valar dohaeris. Signed-off-by: David Lamparter <equinox@opensourcerouting.org> Acked-by: Greg Troxel <gdt@ir.bbn.com> Acked-by: Feng Lu <lu.feng@6wind.com> Acked-by: Paul Jakma <paul@jakma.org>
* *: nuke ^L (page feed)David Lamparter2014-06-041-4/+4
| | | | | | | | | | | | | | Quagga sources have inherited a slew of Page Feed (^L, \xC) characters from ancient history. Among other things, these break patchwork's XML-RPC API because \xC is not a valid character in XML documents. Nuke them from high orbit. Patches can be adapted simply by: sed -e 's%^L%%' -i filename.patch (you can type page feeds in some environments with Ctrl-V Ctrl-L) Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* ripd & ripngd: avoid the zero interface metricLu Feng2014-06-031-1/+1
| | | | | | | | | | | The interface metric is initialized to 0 in the commit db19c85: zebra: set metric for directly connected routes via netlink to 0 Ripd and ripngd must be aware of it and avoid increase the route metric by 0. Signed-off-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* ripngd: limit max of "timers basic" to 65535 as documentedUlrich Weber2011-12-131-21/+3
| | | | and use VTY_GET_INTEGER_RANGE instead of calling strtoul
* IPv6 transport class suppportStephen Hemminger2011-10-171-0/+5
| | | | | | | | | | | | | | | | | | | | | IPv6 supports the same concept of differentiated service for routing protocols as IPv4, but like too many things, the standards committee decided that having two names for the same thing wasn't good enough and introduced a third more generic term transport class. The socket option to set transport class works the same as IPv4, but the arguments are different. * lib/sockopt.[ch] * setsockopt_ipv6_tclass(): new function * bgpd/bgp_network.c * bgp_connect(): set socket option * bgp_listener(): set socket option * ospf6d/ospf6_network.c * ospf6_set_transport_class(): new function * ospf6_serv_sock(): set socket option * ripngd/ripngd.c * ripng_make_socket(): set socket option
* ripngd: compiler warnings cleanupStephen Hemminger2009-12-101-1/+4
| | | | | | | | | | * ripngd/ripng_interface.c * ripng_check_max_mtu(): unused, sayonara * ripng_interface_down(): cast flag arguments to logging function * ripng_interface_add(): idem * ripng_interface_delete(): idem * ripngd/ripngd.c * ripng_recv_packet(): avoid aliasing warning dereferencing pointer
* [cleanup] Make command nodes staticStephen Hemminger2009-06-121-1/+1
| | | | | The cmd_nodes used to configure vty, can mostly be static so (basic data hiding 101).
* [cleanup] Convert XMALLOC/memset to XCALLOCStephen Hemminger2009-06-121-2/+1
| | | | Simple conversion of XMALLOC/memset to XCALLOC
* [trivia] finish off static'ification of ospf6d and ripngdPaul Jakma2008-08-221-31/+29
| | | | | | | | | 2008-08-15 Paul Jakma <paul.jakma@sun.com> * {ospf6d,ripngd}/*: Finish job of marking functions as static, or exporting declarations for them, to quell warning noise with Quagga's GCC default high-level of warning flags. Thus allowing remaining, more useful warnings to be more easily seen.
* [ripd, ripngd] Remove useless code in rip_vty_out_uptime functionAndrew J. Schorr2007-04-271-3/+0
| | | | | | | | 2007-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ripd/ripd.c: (rip_vty_out_uptime) Remove unused variable timer_now. * ripngd/ripngd.c: (ripng_vty_out_uptime) Remove unused variable timer_now.
* Fix the display of some timers. (show ipv6 ripng and show ipv6 ripng status)Vincent Jardin2007-04-121-15/+4
|
* 2005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs2005-10-011-24/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * zebra.h: Declare new functions zebra_route_string() and zebra_route_char(). * log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New functions to map zebra route numbers to strings. * zebra_vty.c: (route_type_str) Remove obsolete function: use new library function zebra_route_string() instead. Note that there are a few differences: for IPv6 routes, we now get "ripng" and "ospf6" instead of the old behavior ("rip" and "ospf"). (route_type_char) Remove obsolete function: ues new library function zebra_route_char() instead. Note that there is one difference: the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route, whereas the new one returns 'X'. (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace route_type_str() with zebra_route_string(). (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char() with zebra_route_char(). * bgp_vty.c: (bgp_config_write_redistribute) Use new library function zebra_route_string instead of a local hard-coded table. * ospf6_asbr.c: Remove local hard-coded tables zroute_name and zroute_abname. Change the ZROUTE_NAME macro to use new library function zebra_route_string(). Remove the ZROUTE_ABNAME macro. (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with a call to zebra_route_char(), and be sure to fix the format string, since we now have a char instead of a char *. * ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and zebra_route_abname. Note that the zebra_route_name[] table contained mixed-case strings, whereas the zebra_route_string() function returns lower-case strings. (ospf6_zebra_read_ipv6): Change debug message to use new library function zebra_route_string() instead of zebra_route_name[]. (show_zebra): Use new library function zebra_route_string() instead of zebra_route_name[]. * ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto. (ospf_redist_string) New function implemented using new library function zebra_route_string(). Note that there are a few differences in the output that will result: the new function returns strings that are lower-case, whereas the old table was mixed case. Also, the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the new function returns "ospf6". * ospfd.h: Remove extern struct message ospf_redistributed_proto[], and add extern const char *ospf_redist_string(u_int route_type) instead. * ospf_asbr.c: (ospf_external_info_add) In two messages, use ospf_redist_string instead of LOOKUP(ospf_redistributed_proto). * ospf_vty.c: Remove local hard-coded table distribute_str. (config_write_ospf_redistribute,config_write_ospf_distribute): Use new library function zebra_route_string() instead of distribute_str[]. * ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset, ospf_redistribute_default_set,ospf_redistribute_check) In debug messages, use ospf_redist_string() instead of LOOKUP(ospf_redistributed_proto). * rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded table str[]. Replace str[] with calls to new library function zebra_route_string(). * ripd.c: Remove local hard-coded table route_info[]. (show_ip_rip) Replace uses of str[] with calls to new library functions zebra_route_char and zebra_route_string. * ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded table str[]. Replace str[i] with new library function zebra_route_string(i). * ripngd.c: Remove local hard-coded table route_info[]. (show_ipv6_ripng) Use new library function zebra_route_char() instead of table route_info[].
* * ripng_zebra.c, ripngd.[ch]: Pass metric info to the zebra daemon.hasso2005-08-271-4/+5
| | | | Forwardport from stable branch.
* * prefix.[hc]: Pass argument to the inet6_ntoa by value making it morehasso2005-04-081-44/+44
| | | | | | inet_ntoa alike. * ripngd.[hc], ripng_interface.c, ripng_peer.c: inet6_ntoa() takes argument now by value.
* 2005-04-07 Paul Jakma <paul.jakma@sun.com>quagga_post_listloop_cleanuppaul2005-04-071-28/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | * (global): Fix up list loops to match changes in lib/linklist, and some basic auditing of usage. * configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES * HACKING: Add notes about deprecating interfaces and commands. * lib/linklist.h: Add usage comments. Rename getdata macro to listgetdata. Rename nextnode to listnextnode and fix its odd behaviour to be less dangerous. Make listgetdata macro assert node is not null, NULL list entries should be bug condition. ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use with for loop, Suggested by Jim Carlson of Sun. Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the "safety" of previous macro. LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to distinguish from the similarly named functions, and reflect their effect better. Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section with the old defines which were modified above, for backwards compatibility - guarded to prevent Quagga using it.. * lib/linklist.c: fix up for linklist.h changes. * ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single scan of the area list, rather than scanning all areas first for INTER_ROUTER and then again for INTER_NETWORK. According to 16.2, the scan should be area specific anyway, and further ospf6d does not seem to implement 16.3 anyway.
* * lib/prefix.[hc]: inet6_ntoa utility function copied fromquagga_pre_listloop_cleanuphasso2005-04-051-55/+44
| | | | | | | | ripngd/ripngd.c (inet6_ntop). * ripngd.[hc]: Remove inet6_ntop() and any usage of it. inet6_ntoa() from lib is used now. * ripng_interface.c: inet6_ntop() -> inet6_ntoa(). * ripng_peer.c: inet6_ntop() -> inet6_ntoa().
* 2005-01-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs2005-01-041-1/+1
| | | | | | | | | | | | | | | | * configure.ac: Added test for broken CMSG_FIRSTHDR macro (relevant for Solaris 8 and unpatched Solaris 9, don't know whether other platforms are affected). * zebra.h: Define ZCMSG_FIRSTHDR appropriately based on whether config.h indicates HAVE_BROKEN_CMSG_FIRSTHDR (as determined by the configure test program). * sockopt.c: (getsockopt_cmsg_data) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. * rtadv.c: (rtadv_recv_packet,rtadv_send_packet) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. * ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. * ripngd.c: (ripng_recv_packet) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.
* 2004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs2004-12-081-30/+30
| | | | * *.c: Change level of debug messages to LOG_DEBUG.
* 2004-11-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs2004-11-201-4/+4
| | | | | * global: Replace strerror with safe_strerror. And vtysh/vtysh.c needs to include "log.h" to pick up the declaration.
* Sync with changes in lib. Make more strings const.hasso2004-10-111-1/+1
|
* Only warning left is the known lvalue problem in ripng_nexthop.c.hasso2004-10-081-5/+6
|
* Compiler warnings fixes.hasso2004-09-261-6/+12
|
* Remove usage of evil list and listnode typedefs.hasso2004-09-231-6/+6
|
* 2004-09-17 Paul Jakma <paul@dishone.st>paul2004-09-171-11/+0
| | | | | | | | * ripngd/ripngd.c: move setsockopt_so_recvbuf to lib. * lib/sockopt.{c,h}: Add setsockopt_so_recvbuf, for ripd and ripngd. * ripd/ripd.c: set receive buffer to a decent size, some systems have low defaults. Problem noted and fix suggested by Stephan Schweizer in [zebra 20967].
* Cosmetical fixes in vty help.hasso2004-09-111-3/+3
|
* 2003-11-17 Hasso Tepper <hasso@estpak.ee>paul2003-11-171-4/+14
| | | | | * ripngd/ripngd.c: ripng_make_socket() add calls to raise/lower privs.
* Apply redistribution route-map's correctly.hasso2003-06-021-1/+1
|
* Ripngd part of 6Wind patch.hasso2003-05-251-325/+875
|
* Revert my http://hasso.linux.ee/zebra/ht-ifrmap-14042003.patch patch. Usedhasso2003-05-241-2/+2
| | | | | same idea as in lib/distribute.c to allow extract.pl to pick up commands for vtysh.
* From: Hasso Tepperpaul2003-04-231-6/+6
| | | | | | This one fixes "router xxx" node commands in vtysh. Don't get "unknown command" error when entering "passive-interface eth0" command while ospfd and ospf6d running etc.
* Hasso Tepperpaul2003-04-191-3/+3
| | | | | | | http://hasso.linux.ee/zebra/ht-ifrmap-14042003.patch Allows to extract.pl to pickup "route-map xxx in/out dev" commands for vtysh (ripngd). As lib/if_rmap.[c|h] are used in ripngd only, I moved them to the ripngd/ directory.
* Initial revisionpaul2002-12-131-0/+2526
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-12 03:57:03 +0000