summaryrefslogtreecommitdiffstats
path: root/ripngd
Commit message (Collapse)AuthorAgeFilesLines
...
| * 2004-01-19 Paul Jakma <paul@dishone.st>paul2004-01-191-36/+19
| | | | | | | | | | | | | | * tests/test-sig.c: New file, regression test for sigevents. * lib/Makefile.am: add sigevent.{c,h} * (isis|rip|ripng|ospf|ospf6|bgp)d/\1_main.c: modify for sigevents. * zebra/main.c: ditto.
| * Really ripngd should either leave groups on down interfaces, or keepgdt2004-01-042-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | track of on which interfaces joins have occurred. This is complicated by the possible lack of a clear behavior spec on whether interfaces keep their joined group lists across a down/up/down transition. (On NetBSD, they do.) 2004-01-03 Greg Troxel <gdt@ahi.ir.bbn.com> * ripng_interface.c (ripng_multicast_join): If IPV6_JOIN_GROUP returns EADDRINUSE, consider the join successful. This happens when an interface goes down and comes back because ripng_multicast_leave does not invoke the LEAVE_GROUP operation if the interface is down. Solves problem of ripng stopping working on an interface which goes down and then comes back up (on NetBSD).
| * Add support for --enable-exampledir to specify where to place examplegdt2003-12-031-1/+2
| | | | | | | | | | | | | | | | files, defaulting to sysconfdir (matching previous behavior). This is needed to support (cleanly) NetBSD pkgsrc, which requires that example config files go in $(prefix)/share/examples/pkgname, rather than in $(prefix)/etc/pkgname.
| * 2003-11-17 Hasso Tepper <hasso@estpak.ee>paul2003-11-171-4/+14
| | | | | | | | | | * ripngd/ripngd.c: ripng_make_socket() add calls to raise/lower privs.
| * 2003-10-24 Paul Jakma <paul@dishone.st>paul2003-10-241-16/+2
| | | | | | | | | | | | | | | | | | * configure.ac: Check for fcntl() * {bgpd,ospf,ospf6d,ripd,ripngd}/Makefile.am: Install conf file via regular automake means, not magic install incantations, see bug #38. * lib/Makefile.am: install the headers, needed to link libzebra.a (and hence libospf.a, OSPF-API, etc.)
| * 2003-08-14 Paul Jakma <paul@dishone.st>paul2003-08-141-4/+7
| | | | | | | | | | | | | | | | | | | | | | * zebra/main.c: Fixup ZEBRA_{GROUP,USER} defines -> QUAGGA_{USER,GROUP} * bgpd/bgp_main.c: ditto * ospf6d/ospf6_main.c: ditto * ospfd/ospf_main.c: ditto * ripd/rip_main.c: ditto * ripngd/ripng_main.c: ditto * zebra/main.c: ditto
| * 2003-08-10 amir <amir@datacore.ch>paul2003-08-101-1/+1
| | | | | | | | | | * Add missing 'i' to getopts, short form of --pid_file. see http://bugzilla.quagga.net/show_bug.cgi?id=25
| * 2003-06-15 Paul Jakma <paul@dishone.st>paul2003-06-151-1/+1
| | | | | | | | | | | | | | | | * lib/vty.{c,h}: Remove vty layer depending on a 'master' global, pass the thread master in explicitly to vty_init. Sort out some header dependency problems with lib/command.h * zebra/: Move globals to struct zebrad. Update vty_init(). * (.*)/\1_main.c: update call to vty_init().
| * 2003-06-04 Paul Jakma <paul@dishone.st>paul2003-06-042-2/+30
| | | | | | | | * Merge of zebra privileges
| * Apply redistribution route-map's correctly.hasso2003-06-021-1/+1
| |
| * ripngd/Makefile.am: missing ripng_nexthop.h from _HEADERS line. breakspaul2003-05-281-1/+1
| | | | | | | | make dist.
| * *BSD compile fix from Rivo Nurges.hasso2003-05-261-0/+5
| |
| * Update changelog as well.hasso2003-05-251-0/+6
| |
| * Ripngd part of 6Wind patch.hasso2003-05-2515-1037/+3113
| |
| * Revert my http://hasso.linux.ee/zebra/ht-ifrmap-14042003.patch patch. Usedhasso2003-05-244-356/+4
| | | | | | | | | | same idea as in lib/distribute.c to allow extract.pl to pick up commands for vtysh.
| * From: Hasso Tepper <hasso@estpak.ee>paul2003-05-231-0/+1
| | | | | | | | | | | | | | | | Add the 'no interface' command to all the daemons and vtysh. now it's possible to delete interface from routeing daemons as well only if it doesn't exist in os. http://hasso.linux.ee/zebra/ht-no_interface_fix.patch
| * Undo Hasso last patch, about to apply a slightly updated patch.paul2003-05-231-1/+0
| |
| * From: Hasso Tepper <hasso@estpak.ee>paul2003-05-231-0/+1
| | | | | | | | | | | | http://hasso.linux.ee/zebra/ht-no_interface-23052003.patch Add the 'no interface' command to all the daemons and vtysh.
| * Update Changelogspaul2003-05-161-0/+9
| |
| * From: Hasso Tepperpaul2003-04-232-12/+12
| | | | | | | | | | | | This one fixes "router xxx" node commands in vtysh. Don't get "unknown command" error when entering "passive-interface eth0" command while ospfd and ospf6d running etc.
| * Hasso Tepperpaul2003-04-194-5/+357
| | | | | | | | | | | | | | http://hasso.linux.ee/zebra/ht-ifrmap-14042003.patch Allows to extract.pl to pickup "route-map xxx in/out dev" commands for vtysh (ripngd). As lib/if_rmap.[c|h] are used in ripngd only, I moved them to the ripngd/ directory.
| * Hasso Tepperpaul2003-04-191-5/+17
| | | | | | | | | | | | http://hasso.linux.ee/zebra/ht-routemap-18042003_5.patch Trivial fixes to sync daemon's route-map commands to have same syntax. Fixes a lot of errors with "match ..." and "set ..." commands when using vtysh.
| * Add Makefile.in to the remaining .cvsignore'spaul2003-04-091-0/+1
| | | | | | | | Add ospfclient to ospfclient/.cvsignore
| * [zebra 18626] move zebra socket paths to configure.acpaul2003-04-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | moved definition of the various socket paths from the per daemon header files into configure.ac. it will set the paths to be in the directory specified by --localstatedir=<prefix> or otherwise will try to guess as best it can ( a la pid file path detection - which probably should try reference ${prefix} too). the present hardcoded socket path, /tmp, isnt really correct. should be in /var somewhere really.
| * Remove auto* files from the repository.paul2003-04-071-401/+0
| | | | | | | | | | | | | | | | | | Developers working with the repository should have the appropriate tools. Out-of-sync files cause far too many problems with users as well as auto* scripts not being half as portable across systems as they ought to be. make-dist exists for a reason. Todo: make the CVS snapshot script do make-dist, and use the resulting tarball as the snapshot.
| * 2003-03-25 Paul Jakma <paul@dishone.st>paul2003-03-251-203/+201
| | | | | | | | | | | | | | | | * sync to latest zebra CVS * spec file: updated and added define for ospf-api/client NB: OSPF-API has been broken by the zebra.org changes, which has added struct ospf * as a new arg to many functions
| * Update auto files.paul2003-03-171-223/+210
| | | | | | | | No doubt builds will now break for everyone. (works here - autoconf 2.13)
| * Sync to Zebra.org 20030301paul2003-03-011-124/+53
| |
| * Revert to zebra.org automake filespaul2003-02-171-52/+123
| |
| * Update auto* build filespaul2003-02-131-123/+52
| |
| * Matthew Grant <grantma@anathoth.gen.nz>patch_z17290_portfixpaul2003-01-221-6/+13
| | | | | | | | | | | | [zebra 17290] [PATCHES] - Fixes for problems in 0.93b portfix patch
| * Initial revisionpaul2002-12-1315-0/+6473
|
* Fix compiler warnings from incorrect format stringsStephen Hemminger2008-07-111-2/+4
| | | | | Mostly from incorrect usage of z option. Need to use: printf(" size = %zd", x->size);
* flag field printf formatting in debug stringsStephen Hemminger2008-05-281-6/+8
| | | | | | | Potential format incompatiablities because flags field in zebra is uint64_t but the printf format was only 32 bit. For safety, convert the flags field to unsigned long long. Since it is really a bit field print in hex.
* [ripd, ripngd] Remove useless code in rip_vty_out_uptime functionajs2007-04-272-3/+4
| | | | | | | | 2007-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ripd/ripd.c: (rip_vty_out_uptime) Remove unused variable timer_now. * ripngd/ripngd.c: (ripng_vty_out_uptime) Remove unused variable timer_now.
* Fix the display of some timers. (show ipv6 ripng and show ipv6 ripng status)vincent2007-04-122-15/+10
|
* [daemon startup] Add --dry-run/-C argument to daemons, to check config file ↵paul2006-10-151-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | syntax 2006-10-04 Oliver Hookins <ohookins@gmail.com> * bgpd/bgp_main.c: Add configuration check option, with '-C' rather than '-c' for consistency between daemons. * isisd/isis_main.c: ditto * ospf6d/ospf6_main.c: ditto * ospfd/ospf_main.c: ditto * ripngd/ripng_main.c: ditto * vtysh/vtysh_main.c: ditto * ripd/rip_main.c: Change the config check option to '-C' and tidy up the code. * zebra/main.c: ditto 2006-10-04 Stergiakis Alexandros <astergiakis@antcor.com> * ripd/rip_main.c: This trivial patch introduces a new command-line option '-c', which instructs zebra/ripd to check its configuration file for validity, print any error message, and then exit. This is useful when the configuration file is edited by hand or otherwise, and you simply want to validate it without any other effect. * zebra/main.c: ditto
* [ripngd] CID #72, remove unneeded NULL checkpaul2006-05-112-11/+14
| | | | | | | 2006-05-11 Paul Jakma <paul.jakma@sun.com> * ripng_interface.c: (ripng_interface_address_add) Remove unneeded NULL check, Coverity CID #72.
* [ripngd] bug #242, fix crash in routemap, ipv6 stored in in_addr.paul2006-05-082-1/+7
| | | | | | | | 2006-05-08 Paul Jakma <paul.jakma@sun.com> * ripng_routemap.c: (route_set_ipv6_nexthop_local_compile) bug #242, s/in_addr/in6_addr to fix crash. Thanks to jithinvachery+quagga@gmail.com.
* [compiler] miscellaneous trivial compiler warning fixespaul2006-01-193-9/+10
| | | | | | | | | | | | | 2006-01-19 Paul Jakma <paul.jakma@sun.com> * (general) various miscellaneous compiler warning fixes. Remove redundant break statements from switch clauses which return. return from main, not exit, cause it annoys SOS. Remove stray semi-colons which cause empty-statement warnings. * zebra/main.c: (sighup) remove private declaration of external function.
* 2005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs2005-10-013-31/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * zebra.h: Declare new functions zebra_route_string() and zebra_route_char(). * log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New functions to map zebra route numbers to strings. * zebra_vty.c: (route_type_str) Remove obsolete function: use new library function zebra_route_string() instead. Note that there are a few differences: for IPv6 routes, we now get "ripng" and "ospf6" instead of the old behavior ("rip" and "ospf"). (route_type_char) Remove obsolete function: ues new library function zebra_route_char() instead. Note that there is one difference: the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route, whereas the new one returns 'X'. (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace route_type_str() with zebra_route_string(). (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char() with zebra_route_char(). * bgp_vty.c: (bgp_config_write_redistribute) Use new library function zebra_route_string instead of a local hard-coded table. * ospf6_asbr.c: Remove local hard-coded tables zroute_name and zroute_abname. Change the ZROUTE_NAME macro to use new library function zebra_route_string(). Remove the ZROUTE_ABNAME macro. (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with a call to zebra_route_char(), and be sure to fix the format string, since we now have a char instead of a char *. * ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and zebra_route_abname. Note that the zebra_route_name[] table contained mixed-case strings, whereas the zebra_route_string() function returns lower-case strings. (ospf6_zebra_read_ipv6): Change debug message to use new library function zebra_route_string() instead of zebra_route_name[]. (show_zebra): Use new library function zebra_route_string() instead of zebra_route_name[]. * ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto. (ospf_redist_string) New function implemented using new library function zebra_route_string(). Note that there are a few differences in the output that will result: the new function returns strings that are lower-case, whereas the old table was mixed case. Also, the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the new function returns "ospf6". * ospfd.h: Remove extern struct message ospf_redistributed_proto[], and add extern const char *ospf_redist_string(u_int route_type) instead. * ospf_asbr.c: (ospf_external_info_add) In two messages, use ospf_redist_string instead of LOOKUP(ospf_redistributed_proto). * ospf_vty.c: Remove local hard-coded table distribute_str. (config_write_ospf_redistribute,config_write_ospf_distribute): Use new library function zebra_route_string() instead of distribute_str[]. * ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset, ospf_redistribute_default_set,ospf_redistribute_check) In debug messages, use ospf_redist_string() instead of LOOKUP(ospf_redistributed_proto). * rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded table str[]. Replace str[] with calls to new library function zebra_route_string(). * ripd.c: Remove local hard-coded table route_info[]. (show_ip_rip) Replace uses of str[] with calls to new library functions zebra_route_char and zebra_route_string. * ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded table str[]. Replace str[i] with new library function zebra_route_string(i). * ripngd.c: Remove local hard-coded table route_info[]. (show_ipv6_ripng) Use new library function zebra_route_char() instead of table route_info[].
* 2005-09-29 Paul Jakma <paul.jakma@sun.com>paul2005-09-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * configure.ac: Add the test for Solaris least-privileges. Set defines for whether capabilities are supported and whether of the linux or solaris variety. Add missing-prototypes, missing-declarations, char-subscripts and cast-qual warnings to default cflags, cause Hasso enjoys warnings, and we really should clean the remaining ones up. (ie isisd..). * (*/*main.c) Update the zebra_capabilities_t arrays in the various daemons to match the changes made in lib/privs.h. * zebra.h: Solaris capabilities requires priv.h to be included. * privs.{c,h}: Add support for Solaris Least-Privileges. privs.h: Reduce some of the abstract capabilities, which do not have rough equivalents on both systems. Rename the net related caps to _NET, as they should have been in first place. (zprivs_terminate) should take the zebra_privs_t as argument so that it can update change pointer. Add an additional privilege state, ZPRIVS_UNKNOWN. * privs.c: (various capability functions) Add Solaris privileges variants. (zprivs_state) Use privs.c specific generic types to represent various capability/privilege related types, so that each can be typedef'd as appropriate on each platform. (zprivs_null_state) static added, to hold the state the null method should report (should be raised by default, and LOWERED if zprivs_terminate has been called) (zprivs_state_null) Report back the zprivs_null_state. (cap_map) Make it able to map abstract capability to multiple system capabilities. (zcaps2sys) Map to abstract capabilities to multiple system privileges/capabilities. (zprivs_init) move capability related init to seperate function, zprivs_caps_init. (zprivs_terminate) ditto, moved to zprivs_caps_terminate. Set the change_state callback to the NULL state, so the user can continue to run and use the callbacks.
* * ripng_zebra.c, ripngd.[ch]: Pass metric info to the zebra daemon.hasso2005-08-274-7/+14
| | | | Forwardport from stable branch.
* 2005-04-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>nonblocking.zclient.afterajs2005-04-112-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement non-blocking zclient I/O with buffering. * zclient.h (struct zclient): Add two fields to support non-blocking I/O: struct buffer *wb, and struct thread *t_write. (zclient_free): Remove function. (zebra_redistribute_send): Change 2nd arg from socket fd to struct zclient * (needed to support non-blocking I/O and buffering). (zclient_send_message): New function to send an arbitrary message with non-blocking I/O. * zclient.c (zclient_new): Create write buffer. (zclient_free): Remove unused function. (zclient_stop): Must cancel new t_write thread. Also, reset all buffers: ibuf, obuf, and wb. (zclient_failed): New helper function for typical error handling. (zclient_flush_data): New thread to flush queued data. (zclient_send_message): New function to send the message in zclient->obuf to zebra using non-blocking I/O and buffering. (zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use new zclient_send_message function instead of calling writen. (zclient_start): Set socket non-blocking. Also, change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. (zebra_redistribute_send): Change 2nd arg to struct zclient *. Can now use zclient->obuf to assemble the message instead of allocating a temporary stream. And call zclient_send_message to send the message instead of writen. (zclient_read): Convert to support non-blocking I/O by using stream_read_try instead of deprecated stream_read. (zclient_redistribute): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead of writen. * rip_zebra.c (rip_redistribute_set, rip_redistribute_unset, rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset): The 2nd arg to zebra_redistribute_send is now zclient instead of zclient->sock. * isis_zebra.h (isis_zebra_finish): Remove declaration of unused function. * isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message to send the message to zebra instead of calling writen directly, since zclient_send_message understands non-blocking I/O and will manage the buffer queue appropriately. (isis_zebra_finish): Remove unused function, particularly since the zclient_free function has been removed.
* * prefix.[hc]: Pass argument to the inet6_ntoa by value making it morehasso2005-04-084-46/+51
| | | | | | inet_ntoa alike. * ripngd.[hc], ripng_interface.c, ripng_peer.c: inet6_ntoa() takes argument now by value.
* 2005-04-07 Paul Jakma <paul.jakma@sun.com>quagga.post.listloop.cleanuppaul2005-04-075-91/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | * (global): Fix up list loops to match changes in lib/linklist, and some basic auditing of usage. * configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES * HACKING: Add notes about deprecating interfaces and commands. * lib/linklist.h: Add usage comments. Rename getdata macro to listgetdata. Rename nextnode to listnextnode and fix its odd behaviour to be less dangerous. Make listgetdata macro assert node is not null, NULL list entries should be bug condition. ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use with for loop, Suggested by Jim Carlson of Sun. Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the "safety" of previous macro. LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to distinguish from the similarly named functions, and reflect their effect better. Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section with the old defines which were modified above, for backwards compatibility - guarded to prevent Quagga using it.. * lib/linklist.c: fix up for linklist.h changes. * ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single scan of the area list, rather than scanning all areas first for INTER_ROUTER and then again for INTER_NETWORK. According to 16.2, the scan should be area specific anyway, and further ospf6d does not seem to implement 16.3 anyway.
* * lib/prefix.[hc]: inet6_ntoa utility function copied fromquagga.pre.listloop.cleanuphasso2005-04-055-59/+53
| | | | | | | | ripngd/ripngd.c (inet6_ntop). * ripngd.[hc]: Remove inet6_ntop() and any usage of it. inet6_ntoa() from lib is used now. * ripng_interface.c: inet6_ntop() -> inet6_ntoa(). * ripng_peer.c: inet6_ntop() -> inet6_ntoa().
* 2005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs2005-04-022-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix problems when netlink interfaces are renamed (same ifindex used for a new interface). Start cleaning up some problems with the way interface names are handled. * interface.c: (if_new_intern_ifindex) Remove obsolete function. (if_delete_update) After distributing the interface deletion message, set ifp->ifindex to IFINDEX_INTERNAL. (if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is IFINDEX_INTERNAL. (zebra_interface) Check return code from interface_cmd.func. Do not set internal ifindex values to if_new_intern_ifindex(), since we now use IFINDEX_INTERNAL for all pseudo interfaces. * kernel_socket.c: (ifm_read) Fix code and comments to reflect that all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL. * rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex. Detects interface rename events by checking if that ifindex is already being used. If it is, delete the old interface before assigning the ifindex to the new interface. (netlink_interface, netlink_link_change) Call set_ifindex to update the ifindex. * if.h: Remove define for IFINDEX_INTERNBASE and add define IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo- interfaces should have ifindex set to 0. (if_new) Remove function. (if_delete_retain) New function to delete an interface without removing from iflist and freeing the structure. (ifname2ifindex) New function. * if.c: (if_new) Remove function (absorb into if_create). (if_create) Replace function if_new with call to calloc. Set ifp->ifindex to IFINDEX_INTERNAL. Fix off-by-one error in assert to check length of interface name. Add error message if interface with this name already exists. (if_delete_retain) New function to delete an interface without removing from iflist and freeing the structure. (if_delete) Implement with help of if_delete_retain. (ifindex2ifname) Reimplement using if_lookup_by_index. (ifname2ifindex) New function to complement ifindex2ifname. (interface) The interface command should check the name length and fail with a warning message if it is too long. (no_interface) Fix spelling in warning message. (if_nametoindex) Reimplement using if_lookup_by_name. (if_indextoname, ifaddr_ipv4_lookup) Reimplement using if_lookup_by_index. * bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL. * isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead of if_delete, since it is generally not safe to remove interface structures. After deleting, set ifp->ifindex to IFINDEX_INTERNAL. (zebra_interface_if_lookup) Tighten up code. * ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function was commented out. But this is not safe: we should at least update the ifindex when the interface is deleted. So the new version updates the interface status and sets ifp->ifindex to IFINDEX_INTERNAL. (ospf6_zebra_route_update) Use if_indextoname properly. * ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface flags to help with debugging. * ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL. (zebra_interface_if_lookup) Make function static. Tighten up code. * rip_interface.c: (rip_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL. * ripng_interface.c: (ripng_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL.
* * configure.ac, */Makefile.am: Fix previous commit. SNMP includeshasso2005-03-281-1/+1
| | | | | must be after lib/ includes in some systems. Introduce SNMP_INCLUDES for that.
* 2005-03-14 Paul Jakma <paul.jakma@sun.com>paul2005-03-141-6/+6
| | | | | | | | | | * (global) update all c files to match the lib/vector.h rename of (struct vector).active to max, and vector_max macro to vector_active. * lib/vector.h: Rename to (struct vector).max to slightly less confusing active, for the number of active slots, distinct from allocated or active-and-not-empty. Rename vector_max to vector_active for same reason.
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-02 23:31:33 +0000