remove stray scenario files

11 files changed, 0 insertions, 333 deletions

diff --git a/testing/tests/ike2/description.txt b/testing/tests/ike2/description.txt
deleted file mode 100644
index 31d24cda6..000000000
--- a/testing/tests/ike2/description.txt
+++ /dev/null
@@ -1,6 +0,0 @@
-The router <b>moon</b> sets up a connection to gateway <b>sun</b> in order
-to reach the subnet hidden behind <b>sun</b>. The gateway <b>sun</b> assigns a
-virtual IP address to router <b>moon</b>. A special updown script on <b>moon</b>
-specified by <b>leftupdown=/etc/nat_updown</b> dynamically inserts a source NAT rule
-which maps the IP address of client <b>alice</b> to the virtual IP of <b>moon</b>.
-This allows <b>alice</b> to access client <b>bob</b> via the established IPsec tunnel.
diff --git a/testing/tests/ike2/evaltest.dat b/testing/tests/ike2/evaltest.dat
deleted file mode 100644
index 75d5ffbd3..000000000
--- a/testing/tests/ike2/evaltest.dat
+++ /dev/null
@@ -1,8 +0,0 @@
-moon::ipsec statusall::net-net.*ESTABLISHED::YES
-sun::ipsec statusall::net-net.*ESTABLISHED::YES
-moon::cat /var/log/daemon.log::inserted NAT rule mapping PH_IP_ALICE to virtual IP::YES
-alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_seq=1::YES
-sun::tcpdump::IP moon.strongswan.org > sun.strongswan.org: ESP::YES
-sun::tcpdump::IP sun.strongswan.org > moon.strongswan.org: ESP::YES
-bob::tcpdump::IP alice2.strongswan.org > bob.strongswan.org: ICMP::YES
-bob::tcpdump::IP bob.strongswan.org > alice2.strongswan.org: ICMP::YES
diff --git a/testing/tests/ike2/hosts/bob/etc/hosts b/testing/tests/ike2/hosts/bob/etc/hosts
deleted file mode 100644
index ee854da09..000000000
--- a/testing/tests/ike2/hosts/bob/etc/hosts
+++ /dev/null
@@ -1,70 +0,0 @@
-# /etc/hosts:  This file describes a number of hostname-to-address
-#              mappings for the TCP/IP subsystem.  It is mostly
-#              used at boot time, when no name servers are running.
-#              On small systems, this file can be used instead of a
-#              "named" name server.  Just add the names, addresses
-#              and any aliases to this file...
-#
-
-127.0.0.1	localhost
-
-192.168.0.254	uml0.strongswan.org	uml0
-10.1.0.254	uml1.strongswan.org	uml1
-10.2.0.254	uml1.strongswan.org	uml2
-
-10.1.0.10	alice.strongswan.org	alice
-10.1.0.20	venus.strongswan.org	venus
-10.1.0.1	moon1.strongswan.org	moon1
-192.168.0.1	moon.strongswan.org	moon
-192.168.0.50	alice1.strongswan.org	alice1
-192.168.0.100	carol.strongswan.org	carol
-10.3.0.1	carol1.strongswan.org	carol1
-192.168.0.150	winnetou.strongswan.org	winnetou crl.strongswan.org ocsp.strongswan.org ldap.strongswan.org
-192.168.0.200	dave.strongswan.org	dave
-10.3.0.2	dave1.strongswan.org	dave1
-192.168.0.2	sun.strongswan.org	sun
-10.2.0.1	sun1.strongswan.org	sun1
-10.2.0.10	bob.strongswan.org	bob
-10.4.0.1	alice2.strongswan.org	alice2
-
-# IPv6 versions of localhost and co
-::1 ip6-localhost ip6-loopback
-fe00::0 ip6-localnet
-ff00::0 ip6-mcastprefix
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters
-ff02::3 ip6-allhosts
-
-# IPv6 solicited-node multicast addresses
-ff02::1:ff00:1	ip6-mcast-1
-ff02::1:ff00:2	ip6-mcast-2
-ff02::1:ff00:10	ip6-mcast-10
-ff02::1:ff00:15	ip6-mcast-15
-ff02::1:ff00:20	ip6-mcast-20
-
-# IPv6 site-local addresses
-fec0::5		ip6-alice1.strongswan.org   ip6-alice1
-fec1::10	ip6-alice.strongswan.org    ip6-alice
-fec1::20	ip6-venus.strongswan.org    ip6-venus
-fec1::1 	ip6-moon1.strongswan.org    ip6-moon1
-fec0::1 	ip6-moon.strongswan.org     ip6-moon
-fec0::10	ip6-carol.strongswan.org    ip6-carol
-fec3::1 	ip6-carol1.strongswan.org   ip6-carol1
-fec0::15	ip6-winnetou.strongswan.org ip6-winnetou 
-fec0::20	ip6-dave.strongswan.org     ip6-dave
-fec3::2 	ip6-dave1.strongswan.org    ip6-dave1
-fec0::2 	ip6-sun.strongswan.org      ip6-sun
-fec2::1 	ip6-sun1.strongswan.org     ip6-sun1
-fec2::10	ip6-bob.strongswan.org      ip6-bob
-
-# IPv6 link-local HW derived addresses
-fe80::fcfd:0aff:fe01:14	ip6-hw-venus.strongswan.org    ip6-hw-venus
-fe80::fcfd:0aff:fe01:0a	ip6-hw-alice.strongswan.org    ip6-hw-alice
-fe80::fcfd:0aff:fe01:01	ip6-hw-moon1.strongswan.org    ip6-hw-moon1
-fe80::fcfd:c0ff:fea8:01 ip6-hw-moon.strongswan.org     ip6-hw-moon
-fe80::fcfd:c0ff:fea8:64	ip6-hw-carol.strongswan.org    ip6-hw-carol
-fe80::fcfd:c0ff:fea8:96 ip6-hw-winnetou.strongswan.org ip6-hw-winnetou
-fe80::fcfd:c0ff:fea8:c8	ip6-hw-dave.strongswan.org     ip6-hw-dave
-fe80::fcfd:c0ff:fea8:02	ip6-hw-sun.strongswan.org      ip6-hw-sun
-fe80::fcfd:0aff:fe02:01	ip6-hw-sun1.strongswan.org     ip6-hw-sun1
-fe80::fcfd:0aff:fe02:0a ip6-hw-bob.strongswan.org      ip6-hw-bob
diff --git a/testing/tests/ike2/hosts/moon/etc/ipsec.conf b/testing/tests/ike2/hosts/moon/etc/ipsec.conf
deleted file mode 100755
index e43e0d785..000000000
--- a/testing/tests/ike2/hosts/moon/etc/ipsec.conf
+++ /dev/null
@@ -1,25 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-        crlcheckinterval=180
-	strictcrlpolicy=no
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-	keyingtries=1
-	keyexchange=ikev2
-	mobike=no
-
-conn net-net 
-	left=PH_IP_MOON
-	leftcert=moonCert.pem
-	leftid=@moon.strongswan.org
-	leftsourceip=%config
-	leftupdown=/etc/nat_updown
-	right=PH_IP_SUN
-	rightid=@sun.strongswan.org
-	rightsubnet=10.2.0.0/16
-	auto=add
diff --git a/testing/tests/ike2/hosts/moon/etc/nat_updown b/testing/tests/ike2/hosts/moon/etc/nat_updown
deleted file mode 100755
index aab1df687..000000000
--- a/testing/tests/ike2/hosts/moon/etc/nat_updown
+++ /dev/null
@@ -1,152 +0,0 @@
-#! /bin/sh
-# NAT updown script
-#
-# Copyright (C) 2010 Andreas Steffen <andreas.steffen@strongswan.org>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation; either version 2 of the License, or (at your
-# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-
-# things that this script gets (from ipsec_pluto(8) man page)
-#
-#      PLUTO_VERSION
-#              indicates  what  version of this interface is being
-#              used.  This document describes version  1.1.   This
-#              is upwardly compatible with version 1.0.
-#
-#       PLUTO_VERB
-#              specifies the name of the operation to be performed
-#              (prepare-host, prepare-client, up-host, up-client,
-#              down-host, or down-client).  If the address family
-#              for security gateway to security gateway communica-
-#              tions is IPv6, then a suffix of -v6 is added to the
-#              verb.
-#
-#       PLUTO_CONNECTION
-#              is the name of the  connection  for  which  we  are
-#              routing.
-#
-#       PLUTO_NEXT_HOP
-#              is the next hop to which packets bound for the peer
-#              must be sent.
-#
-#       PLUTO_INTERFACE
-#              is the name of the ipsec interface to be used.
-#
-#       PLUTO_REQID
-#              is the requid of the ESP policy
-#
-#       PLUTO_ME
-#              is the IP address of our host.
-#
-#       PLUTO_MY_ID
-#              is the ID of our host.
-#
-#       PLUTO_MY_CLIENT
-#              is the IP address / count of our client subnet.  If
-#              the  client  is  just  the  host,  this will be the
-#              host's own IP address / max (where max  is  32  for
-#              IPv4 and 128 for IPv6).
-#
-#       PLUTO_MY_CLIENT_NET
-#              is the IP address of our client net.  If the client
-#              is just the host, this will be the  host's  own  IP
-#              address.
-#
-#       PLUTO_MY_CLIENT_MASK
-#              is  the  mask for our client net.  If the client is
-#              just the host, this will be 255.255.255.255.
-#
-#       PLUTO_MY_SOURCEIP
-#              if non-empty, then the source address for the route will be
-#              set to this IP address.
-#
-#       PLUTO_MY_PROTOCOL
-#              is the IP protocol that will be transported.
-#
-#       PLUTO_MY_PORT
-#              is  the  UDP/TCP  port  to  which  the IPsec SA  is
-#              restricted on our side.
-#
-#       PLUTO_PEER
-#              is the IP address of our peer.
-#
-#       PLUTO_PEER_ID
-#              is the ID of our peer.
-#
-#       PLUTO_PEER_CA
-#              is the CA which issued the cert of our peer.
-#
-#       PLUTO_PEER_CLIENT
-#              is the IP address / count of the peer's client sub-
-#              net.   If the client is just the peer, this will be
-#              the peer's own IP address / max (where  max  is  32
-#              for IPv4 and 128 for IPv6).
-#
-#       PLUTO_PEER_CLIENT_NET
-#              is the IP address of the peer's client net.  If the
-#              client is just the peer, this will  be  the  peer's
-#              own IP address.
-#
-#       PLUTO_PEER_CLIENT_MASK
-#              is  the  mask  for  the  peer's client net.  If the
-#              client   is   just   the   peer,   this   will   be
-#              255.255.255.255.
-#
-#       PLUTO_PEER_PROTOCOL
-#              is the IP protocol that will be transported.
-#
-#       PLUTO_PEER_PORT
-#              is  the  UDP/TCP  port  to  which  the IPsec SA  is
-#              restricted on the peer side.
-#
-
-# define a minimum PATH environment in case it is not set
-PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin"
-export PATH
-
-# resolve octal escape sequences
-PLUTO_MY_ID=`printf "$PLUTO_MY_ID"`
-PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"`
-
-case "$PLUTO_VERB:$1" in
-up-host:)
-	# connection to me coming up
-	# If you are doing a custom version, firewall commands go here.
-	;;
-down-host:)
-	# connection to me going down
-	# If you are doing a custom version, firewall commands go here.
-	;;
-up-client:)
-	# connection to my client subnet coming up
-	# If you are doing a custom version, firewall commands go here.
-	iptables -A FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \
-	    -d $PLUTO_PEER_CLIENT -j ACCEPT
-        iptables -A FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \
-            -s $PLUTO_PEER_CLIENT -j ACCEPT
-	iptables -t nat -A POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \
-	    -d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP
-	echo "inserted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2 
-	;;
-down-client:)
-	# connection to my client subnet going down
-	# If you are doing a custom version, firewall commands go here.
-        iptables -D FORWARD -i eth1 -o $PLUTO_INTERFACE -s PH_IP_ALICE \
-            -d $PLUTO_PEER_CLIENT -j ACCEPT
-        iptables -D FORWARD -o eth1 -i $PLUTO_INTERFACE -d PH_IP_ALICE \
-            -s $PLUTO_PEER_CLIENT -j ACCEPT
-         iptables -t nat -D POSTROUTING -o $PLUTO_INTERFACE -s PH_IP_ALICE \
-            -d $PLUTO_PEER_CLIENT -j SNAT --to-source $PLUTO_MY_SOURCEIP
-        echo "deleted NAT rule mapping PH_IP_ALICE to virtual IP $PLUTO_MY_SOURCEIP" >&2    
-	;;
-*)	echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
-	exit 1
-	;;
-esac
diff --git a/testing/tests/ike2/hosts/moon/etc/strongswan.conf b/testing/tests/ike2/hosts/moon/etc/strongswan.conf
deleted file mode 100644
index 161934454..000000000
--- a/testing/tests/ike2/hosts/moon/etc/strongswan.conf
+++ /dev/null
@@ -1,6 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink socket-raw updown
-  multiple_authentication = no
-}
diff --git a/testing/tests/ike2/hosts/sun/etc/ipsec.conf b/testing/tests/ike2/hosts/sun/etc/ipsec.conf
deleted file mode 100755
index 9cede8d56..000000000
--- a/testing/tests/ike2/hosts/sun/etc/ipsec.conf
+++ /dev/null
@@ -1,25 +0,0 @@
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
-        crlcheckinterval=180
-	strictcrlpolicy=no
-	plutostart=no
-
-conn %default
-	ikelifetime=60m
-	keylife=20m
-	rekeymargin=3m
-        keyingtries=1
-	keyexchange=ikev2
-	mobike=no
-
-conn net-net 
-	left=PH_IP_SUN
-	leftcert=sunCert.pem
-	leftid=@sun.strongswan.org
-	leftsubnet=10.2.0.0/16
-	leftfirewall=yes
-	right=PH_IP_MOON
-	rightid=@moon.strongswan.org
-	rightsourceip=10.4.0.0/24
-	auto=add
diff --git a/testing/tests/ike2/hosts/sun/etc/strongswan.conf b/testing/tests/ike2/hosts/sun/etc/strongswan.conf
deleted file mode 100644
index 161934454..000000000
--- a/testing/tests/ike2/hosts/sun/etc/strongswan.conf
+++ /dev/null
@@ -1,6 +0,0 @@
-# /etc/strongswan.conf - strongSwan configuration file
-
-charon {
-  load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 hmac xcbc stroke kernel-netlink socket-raw updown
-  multiple_authentication = no
-}
diff --git a/testing/tests/ike2/posttest.dat b/testing/tests/ike2/posttest.dat
deleted file mode 100644
index b121de27d..000000000
--- a/testing/tests/ike2/posttest.dat
+++ /dev/null
@@ -1,5 +0,0 @@
-moon::ipsec stop
-sun::ipsec stop
-moon::/etc/init.d/iptables stop 2> /dev/null
-sun::/etc/init.d/iptables stop 2> /dev/null
-moon::conntrack -F
diff --git a/testing/tests/ike2/pretest.dat b/testing/tests/ike2/pretest.dat
deleted file mode 100644
index abbca90d7..000000000
--- a/testing/tests/ike2/pretest.dat
+++ /dev/null
@@ -1,9 +0,0 @@
-moon::/etc/init.d/iptables start 2> /dev/null
-sun::/etc/init.d/iptables start 2> /dev/null
-moon::conntrack -F
-moon::echo 1 > /proc/sys/net/ipv4/ip_forward
-moon::ipsec start
-sun::ipsec start
-moon::sleep 1 
-moon::ipsec up net-net
-moon::sleep 1
diff --git a/testing/tests/ike2/test.conf b/testing/tests/ike2/test.conf
deleted file mode 100644
index 1971a33ab..000000000
--- a/testing/tests/ike2/test.conf
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon winnetou sun bob"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-w-s-b.png"
- 
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="sun bob"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon sun"