diff options
Diffstat (limited to 'Makefile.inc')
| -rw-r--r-- | Makefile.inc | 235 |
1 files changed, 0 insertions, 235 deletions
diff --git a/Makefile.inc b/Makefile.inc deleted file mode 100644 index d4d38f0f9..000000000 --- a/Makefile.inc +++ /dev/null @@ -1,235 +0,0 @@ -# FreeS/WAN pathnames and other master configuration -# Copyright (C) 2001, 2002 Henry Spencer. -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation; either version 2 of the License, or (at your -# option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# RCSID $Id: Makefile.inc,v 1.12 2006/01/25 17:23:15 as Exp $ - - -# Variables in this file with names starting with INC_ are not for use -# by Makefiles which include it; they are subject to change without warning. -# -# "Final" and "finally" refer to where the files will end up on the -# running IPsec system, as opposed to where they get installed by our -# Makefiles. (The two are different for cross-compiles and the like, -# where our Makefiles are not the end of the installation process.) -# Paths with FINAL in their names are the only ones that the installed -# software itself depends on. (Very few things should know about the -# FINAL paths; think twice and consult Henry before making something new -# depend on them.) All other paths are install targets. -# See also DESTDIR, below. - - -### boilerplate, do not change -SHELL=/bin/sh - -### paths within the source tree - -KLIPSINC=${FREESWANSRCDIR}/linux/include -KLIPSSRC=${FREESWANSRCDIR}/linux/net/ipsec - -LIBFREESWANDIR=${FREESWANSRCDIR}/linux/lib/libfreeswan -FREESWANLIB=${FREESWANSRCDIR}/lib/libfreeswan/libfreeswan.a - -LWRESDIR=${FREESWANSRCDIR}/lib/liblwres -LWRESLIB=${LWRESDIR}/liblwres.a - -LIBDESSRCDIR=${FREESWANSRCDIR}/linux/crypto/ciphers/des -LIBDESLITE=${FREESWANSRCDIR}/lib/libdes/libdes.a - -LIBPOLICYDIR=${FREESWANSRCDIR}/linux/lib/libipsecpolicy -POLICYLIB=${FREESWANSRCDIR}/lib/libipsecpolicy/libipsecpolicy.a - -.PHONY: programs checkprograms clean - -### install pathnames - -# DESTDIR can be used to supply a prefix to all install targets. -# (Note that "final" pathnames, signifying where files will eventually -# reside rather than where install puts them, are exempt from this.) -# The prefixing is done in this file, so as to have central control over -# it; DESTDIR itself should never appear in any other Makefile. -DESTDIR?= - -# "local" part of tree, used in building other pathnames -INC_USRLOCAL=/usr/local - -# PUBDIR is where the "ipsec" command goes; beware, many things define PATH -# settings which are assumed to include it (or at least, to include *some* -# copy of the "ipsec" command). -PUBDIR=$(DESTDIR)$(INC_USRLOCAL)/sbin - -# BINDIR is where sub-commands get put, FINALBINDIR is where the "ipsec" -# command will look for them when it is run. Also called LIBEXECDIR. -FINALLIBEXECDIR=$(INC_USRLOCAL)/libexec/ipsec -LIBEXECDIR=$(DESTDIR)$(FINALBINDIR) - -FINALBINDIR=${FINALLIBEXECDIR} -BINDIR=${LIBEXECDIR} - - -# SBINDIR is where the user interface command goes. -FINALSBINDIR=$(INC_USRLOCAL)/sbin -SBINDIR=$(DESTDIR)$(FINALSBINDIR) - -# libdir is where utility files go -FINALLIBDIR=$(INC_USRLOCAL)/lib/ipsec -LIBDIR=$(DESTDIR)$(FINALLIBDIR) - -# sharedlibdir is where shared libraries go -SHAREDLIBDIR=$(DESTDIR)$(INC_USRLOCAL)/lib - -# where the appropriate manpage tree is located -# location within INC_USRLOCAL -INC_MANDIR=man -# the full pathname -MANTREE=$(DESTDIR)$(INC_USRLOCAL)/$(INC_MANDIR) -# all relevant subdirectories of MANTREE -MANPLACES=man3 man5 man8 - -# where configuration files go -FINALCONFFILE?=/etc/ipsec.conf -CONFFILE=$(DESTDIR)$(FINALCONFFILE) - -FINALCONFDIR?=/etc -CONFDIR=$(DESTDIR)$(FINALCONFDIR) - -FINALCONFDDIR?=${FINALCONFDIR}/ipsec.d -CONFDDIR=$(DESTDIR)$(FINALCONFDDIR) - -# sample configuration files go into -INC_DOCDIR?=share/doc -FINALEXAMPLECONFDIR=${INC_USRLOCAL}/${INC_DOCDIR}/strongswan -EXAMPLECONFDIR=${DESTDIR}${FINALEXAMPLECONFDIR} - -FINALDOCDIR?=${INC_USRLOCAL}/${INC_DOCDIR}/strongswan -DOCDIR=${DESTDIR}${FINALDOCDIR} - -# where per-conn pluto logs go -VARDIR?=/var -LOGDIR?=${VARDIR}/log -FINALLOGDIR?=${DESTDIR}${LOGDIR} - - -# An attempt is made to automatically figure out where boot/shutdown scripts -# will finally go: the first directory in INC_RCDIRS which exists gets them. -# If none of those exists (or INC_RCDIRS is empty), INC_RCDEFAULT gets them. -# With a non-null DESTDIR, INC_RCDEFAULT will be used unless one of the -# INC_RCDIRS directories has been pre-created under DESTDIR. -INC_RCDIRS=/etc/rc.d/init.d /etc/rc.d /etc/init.d /sbin/init.d -INC_RCDEFAULT=/etc/rc.d/init.d - -# RCDIR is where boot/shutdown scripts go; FINALRCDIR is where they think -# will finally be (so utils/Makefile can create a symlink in BINDIR to the -# place where the boot/shutdown script will finally be, rather than the -# place where it is installed). -FINALRCDIR=$(shell for d in $(INC_RCDIRS) ; \ - do if test -d $(DESTDIR)/$$d ; \ - then echo $$d ; exit 0 ; \ - fi ; done ; echo $(INC_RCDEFAULT) ) -RCDIR=$(DESTDIR)$(FINALRCDIR) - - - -### misc installation stuff - -# what program to use when installing things -INSTALL=install - -# flags to the install program, for programs, manpages, and config files -# -b has install make backups (n.b., unlinks original), --suffix controls -# how backup names are composed. -# Note that the install procedures will never overwrite an existing config -# file, which is why -b is not specified for them. -INSTBINFLAGS=-b --suffix=.old -INSTMANFLAGS= -INSTCONFFLAGS= - - -### misc configuration, included here in hopes that other files will not -### have to be changed for common customizations. - -# extra compile flags, for userland and kernel stuff, e.g. -g for debug info -# (caution, this stuff is still being sorted out, will change in future) -USERCOMPILE?=-g -O3 - -# FreeSWAN 3.x will require bind9. -USE_LWRES?=false - -# whether or not to use iproute2 based commands. -# -USE_IPROUTE2?=true - -# what kind of firewalling to use: -# 2.0 - ipfwadm -# 2.2 - ipchains -# 2.4 - iptables -IPSEC_FIREWALLTYPE=iptables - -# whether or not to include ipsec policy code into pluto. -# false for now, since it is still experimental. -USE_IPSECPOLICY?=false - -# include support for KEY RR -# this will become false in late 2003. -USE_KEYRR?=true - -# include support for KERNEL 2.5/2.6 IPsec in pluto -USE_KERNEL26?=true - -# whether or not pluto sends its strongSwan Vendor ID -USE_VENDORID?=true - -# whether or not pluto sends an XAUTH VID (Cisco Mode Config Interoperability) -USE_XAUTH_VID?=false - -# whether to support NAT Traversal (aka NAT-T) -USE_NAT_TRAVERSAL?=true - -# whether to support NAT-T in transport mode (needed for Win2K NAT-T Interop) -USE_NAT_TRAVERSAL_TRANSPORT_MODE?=false - -# include libcurl support (currently used for fetching CRLs, OCSP and SCEP) -USE_LIBCURL?=false - -# include LDAP support (currently used for fetching CRLs) -USE_LDAP?=false - -# uncomment this line if using the LDAPv3 protocol -LDAP_VERSION=3 -# uncomment this line if using the LDAPv2 protocol -#LDAP_VERSION=2 - -# include PKCS11-based smartcard support -USE_SMARTCARD?=false - -# Default PKCS11 library -# Uncomment this line if using OpenSC <= 0.9.6 -#PKCS11_DEFAULT_LIB=\"/usr/lib/pkcs11/opensc-pkcs11.so\" -# Uncomment this line if using OpenSC >= 0.10.0 -PKCS11_DEFAULT_LIB=\"/usr/lib/opensc-pkcs11.so\" -# Uncomment and complete this line if using another default library -#PKCS11_DEFAULT_LIB=\"/usr/lib/...\" - -# Enable the leak detective to find memory leaks -USE_LEAK_DETECTIVE?=false - -# export everything so that scripts can use them. -export LIBFREESWANDIR FREESWANSRCDIR FREESWANLIB - --include ${FREESWANSRCDIR}/Makefile.ver - -# for emacs -# -# Local Variables: ;;; -# mode: makefile ;;; -# End Variables: ;;; -# |