aboutsummaryrefslogtreecommitdiffstats
path: root/src/libcharon/sa
Commit message (Collapse)AuthorAgeFilesLines
* ikev1: Be more verbose if a peer config would match, but is unusable for ModeMartin Willi2014-09-251-0/+12
|
* ikev2: Reorder task activation for established IKE SAsTobias Brunner2014-09-251-11/+11
| | | | We now prefer MOBIKE tasks over delete tasks then the rest.
* Revert "ikev2: Insert MOBIKE tasks at the front of the queue"Tobias Brunner2014-09-251-6/+1
| | | | | | | | This reverts commit 3293d146289d7c05e6c6089ae1f7cdbcea378e63. The position of tasks in the queue does not actually determine the order in which they are activated. Instead this is determined by the statements in task_manager_v2_t.initiate().
* ikev2: Don't treat initial messages as MOBIKE exchangesTobias Brunner2014-09-161-6/+9
| | | | | The MOBIKE task is active during the initial exchanges but we don't want to treat them as actual MOBIKE exchanges (i.e. there is no path probing).
* ikev2: Reduce timeout if path probing was enabledTobias Brunner2014-09-121-6/+13
|
* ikev2: Defer MOBIKE updates if no path is availableTobias Brunner2014-09-121-7/+14
|
* ike-mobike: Allow calling transmit() even when not currently path probingTobias Brunner2014-09-121-5/+17
| | | | Path probing is enabled if the current path is not available anymore.
* ikev2: Defer path probing if no path is currently availableTobias Brunner2014-09-121-1/+20
| | | | | We do the same before initiating the task, so we should probably do it too when we already initiated it, not just time out and destroy the SA.
* ike-mobike: Return FALSE in transmit() if no path was availableTobias Brunner2014-09-122-3/+7
|
* ikev2: Enable path probing for currently active MOBIKE taskTobias Brunner2014-09-121-0/+18
| | | | | | | This might not be the case if e.g. an address appeared but the old one is still available but not actually usable. Without this the MOBIKE task would eventually time out even though we might be able to switch to a working address.
* ike-mobike: Add method to enable path probingTobias Brunner2014-09-122-0/+12
|
* ike-mobike: Skip peer addresses we can't send packets to when checking pathsTobias Brunner2014-09-121-5/+18
|
* ikev2: Skip peer addresses we can't send packets to when looking for valid pathsTobias Brunner2014-09-121-0/+18
|
* ikev2: Insert MOBIKE tasks at the front of the queueTobias Brunner2014-09-121-1/+6
| | | | | In case we have no usable path to the other peer there is no point in initiating any other tasks (like rekeying).
* ikev2: Migrate number of pending MOBIKE updatesTobias Brunner2014-09-121-0/+5
| | | | | This will probably never be more than 1 since we only have one task queued at a time and we don't migrate running tasks.
* ikev2: Properly keep track of pending MOBIKE updatesTobias Brunner2014-09-121-8/+27
| | | | | | | | Because we only queue one MOBIKE task at a time, but destroy superfluous ones only after we already increased the counter for pending MOBIKE updates, we have to reduce the counter when such tasks are destroyed. Otherwise, the queued task would assume another task is queued when it is running and ignore any successful response.
* ikev1: Make sure proposed IPsec mode matches our ownTobias Brunner2014-09-091-1/+2
| | | | References #557.
* ike: Reset IKE_SA in state CONNECTING instead of reauthenticatingTobias Brunner2014-09-091-0/+8
| | | | | | | | Due to how reauthentication works for IKEv1 we could get a second IKE_SA, which might cause problems, when connectivity problems arise when the connection is initially established. Fixes #670.
* ikev1: Defer Mode Config push after CHILD adoption when using XAuthMartin Willi2014-08-254-6/+40
|
* ikev1: Defer Mode Config push after CHILD adoption and reauth detectionMartin Willi2014-08-252-10/+35
| | | | | | | | When an initiator starts reauthentication on a connection that uses push mode to assign a virtual IP, we can't execute the Mode Config before releasing the virtual IP. Otherwise we would request a new and different lease, which the client probably can't handle. Defer Mode Config execution, so the same IP gets first released then reassigned during reauthentication.
* ikev1: Accept Quick Mode DELETES while Quick Mode rekeying is activeMartin Willi2014-08-251-2/+21
| | | | | | | | | | If a peer immediately sends DELETE messages when completing Quick Mode rekeying, the third Quick Mode message and the DELETE are sent simultaneously. This implies that DELETE messages may arrive before the completing third Quick Mode message. Handle this case by ignoring the DELETE INFORMATIONAL in Quick Mode and let the delete task handle it.
* ike-sa-manager: Use transient hasher for IKE_SA_INIT hash calculationChristophe Gouault2014-08-251-32/+11
| | | | | | | | | | | | | | | | To check if a received IKE_SA_INIT request is a new request or a retransmit, charon maintains hashes of the pending IKE_SA_INIT exchanges. However, the hash calculation is not reentrant because a single hasher is used for the whole IKE SA manager. It leads to bogus calculations under high load and hence dropped messages on responder (IkeInInvalidSpi incremented). Don't share a single hasher in the IKE SA manager, create a transient one whenever a message must be hashed. Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com>
* bus: Add ike_reestablish_pre hook, called before DNS resolutionTobias Brunner2014-07-221-1/+5
| | | | | The old hook is renamed to ike_reestablish_post and is now also called when the initiation of the new IKE_SA failed.
* shunt-manager: Install passthrough policies with highest priorityTobias Brunner2014-06-191-9/+34
| | | | | | This avoids conflicts with regular IPsec policies. Similarly, use the lowest priority for drop policies.
* child-sa: Set replay window on both inbound and outbound SAMartin Willi2014-06-181-6/+2
| | | | | | | | While the outbound SA actually does not need a replay window, the kernel rejects zero replay windows on SAs using ESN. The ESN flag is required to use the full sequence number in ICV calculation, hence we set the replay window. This restores the behavior we had before 30c009c2.
* ikev1: Allow late connection switching based on XAuth usernameTobias Brunner2014-06-181-6/+0
|
* kernel-interface: Add a replay_window parameter to add_sa()Martin Willi2014-06-171-2/+6
|
* bus: Add a handle_vips() hook invoked after handling configuration attributesMartin Willi2014-06-173-0/+5
| | | | | | | | | Similar to assign_vips() used by a peer assigning virtual IPs to the other peer, the handle_vips() hook gets invoked on a peers after receiving attributes. On release of the same attributes the hook gets invoked again. This is useful to inspect handled attributes, as the ike_updown() hook is invoked after authentication, when attributes have not been handled yet.
* ikev1: Invoke the assign_vips() bus hook for IKEv1 as wellMartin Willi2014-06-161-0/+4
|
* ike: Create an enumerator for (un-)handled configuration attributes on IKE_SAMartin Willi2014-06-162-0/+32
|
* ike: Store unhandled attributes on IKE_SA as wellMartin Willi2014-06-164-12/+12
|
* child-sa: Pass the number of total policies tied to an SA to the kernelMartin Willi2014-06-041-0/+8
| | | | | This will be useful if the kernel backend has to know how many policies follow an SA install, for example if it must install all policies concurrently.
* kernel-interface: Add a flag to indicate no policy updates requiredMartin Willi2014-06-041-3/+14
|
* payload: Use common prefixes for all payload type identifiersMartin Willi2014-06-0438-166/+166
| | | | | The old identifiers did not use a proper namespace and often clashed with other defines.
* ikev1: Fix debugging log when remote traffic selector selection failsMartin Willi2014-05-141-1/+1
|
* child-sa: Reclaim old state if SA updating is not supportedMartin Willi2014-05-091-0/+2
| | | | | If the state stays at UPDATING, the fallback using IKEv1 rekeying fails as the task manager refuses to rekey a CHILD_SA in non-INSTALLED state.
* ike-sa-manager: Improve scalability of half-open IKE_SA checkingTobias Brunner2014-04-241-7/+8
| | | | | | | | | | | | | | | This patch is based on one by Christoph Gouault. Currently, to count the total number of half_open IKE_SAs, get_half_open_count sums up the count of each segment in the SA hash table (acquiring a lock for each segment). This procedure does not scale well when the number of segments increases, as the method is called for each new negotiation. Instead, lets maintain a global atomic counter. This optimization allows the use of big values for charon.ikesa_table_size and charon.ikesa_table_segments.
* ikev2: Reject CHILD_SA creation/rekeying while deleting an IKE_SAMartin Willi2014-04-171-0/+6
| | | | | | | | | | | If one peer starts reauthentication by deleting the IKE_SA, while the other starts CHILD_SA rekeying, we run in a race condition. To avoid it, temporarily reject the rekey attempt while we are in the IKE_SA deleting state. RFC 4306/5996 is not exactly clear about this collision, but it should be safe to reject CHILD_SA rekeying during this stage, as the reauth will re-trigger the CHILD_SA. For non-rekeying CHILD_SA creations, it's up to the peer to retry establishing the CHILD_SA on the reauthenticated IKE_SA.
* ikev2: Apply extensions and conditions before starting rekeyingMartin Willi2014-04-171-0/+6
| | | | | | The extensions and conditions apply to the rekeyed IKE_SA as well, so we should migrate them. Especially when using algorithms from private space, we need EXT_STRONGSWAN to properly select these algorithms during IKE rekeying.
* ikev2: Add inherit_pre() to apply config and hosts before IKE_SA rekeyingMartin Willi2014-04-173-14/+28
|
* ikev2: Fix reauthentication if peer assigns a different virtual IPTobias Brunner2014-04-151-1/+1
| | | | | | | | | | | | | | | | | Before this change a reqid set on the create_child_t task was used as indicator of the CHILD_SA being rekeyed. Only if that was not the case would the local traffic selector be changed to 0.0.0.0/0|::/0 (as we don't know which virtual IP the gateway will eventually assign). On the other hand, in case of a rekeying the VIP is expected to remain the same, so the local TS would simply equal the VIP. Since c949a4d5016e33c5 reauthenticated CHILD_SAs also have the reqid set. Which meant that the local TS would contain the previously assigned VIP, basically rendering the gateway unable to assign a different VIP to the client as the resulting TS would not match the client's proposal anymore. Fixes #553.
* ikev2: Reject CREATE_CHILD_SA exchange on unestablished IKE_SAsMartin Willi2014-04-141-0/+9
| | | | | | | Prevents a responder peer to trick us into established state by starting IKE_SA rekeying before the IKE_SA has been authenticated during IKE_AUTH. Fixes CVE-2014-2338.
* aead: Support custom AEAD salt sizesMartin Willi2014-03-311-2/+27
| | | | | | | | | The salt, or often called implicit nonce, varies between AEAD algorithms and their use in protocols. For IKE and ESP, GCM uses 4 bytes, while CCM uses 3 bytes. With TLS, however, AEAD mode uses 4 bytes for both GCM and CCM. Our GCM backends currently support 4 bytes and CCM 3 bytes only. This is fine until we go for CCM mode support in TLS, which requires 4 byte nonces.
* ikev2: Recreate a CHILD_SA that got a hard lifetime expire without rekeyingMartin Willi2014-03-311-0/+12
| | | | | Works around issues related to system time changes and kernel backends using that system time, such as Linux XFRM.
* ikev2: Cache all received attribute certificates to auth configMartin Willi2014-03-311-1/+27
|
* ikev2: Send all known and valid attribute certificates for subject certMartin Willi2014-03-311-0/+46
|
* ikev2: Slightly refactor certificate payload construction to separate functionsMartin Willi2014-03-311-37/+56
|
* uclibc only defines strndup(3) if _GNU_SOURCE is definedTobias Brunner2014-02-191-0/+3
| | | | References #516.
* libcharon: Use lib->ns instead of charon->nameTobias Brunner2014-02-1211-26/+26
|
* ikev1: Fix config switching due to failed authentication during Aggressive modeTobias Brunner2014-02-121-3/+1
| | | | | | | The encoded ID payload gets destroyed by the authenticator, which caused a segmentation fault after the switch. Fixes #501.
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-04 17:10:42 +0000