summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--config/templates/linksysata-template.lua754
1 files changed, 0 insertions, 754 deletions
diff --git a/config/templates/linksysata-template.lua b/config/templates/linksysata-template.lua
index ba71657..a8f9022 100644
--- a/config/templates/linksysata-template.lua
+++ b/config/templates/linksysata-template.lua
@@ -29,315 +29,28 @@ end
<flat-profile>
-<Restricted_Access_Domains ua="na"></Restricted_Access_Domains>
-<Enable_Web_Server ua="na">Yes</Enable_Web_Server>
-<Web_Server_Port ua="na">80</Web_Server_Port>
-<Enable_Web_Admin_Access ua="na">Yes</Enable_Web_Admin_Access>
-
<Admin_Passwd ua="na"><%= values.device.adminpassword %></Admin_Passwd>
-
<User_Password ua="na"><%= values.device.adminpassword %></User_Password>
-
-
-<DHCP ua="na">Yes</DHCP>
-<Static_IP ua="na"></Static_IP>
-<NetMask ua="na"></NetMask>
-<Gateway ua="na"></Gateway>
-
-
-
<HostName ua="na"><% io.write(values.reg1.extension) %></HostName>
-<Domain ua="na" />
-
-<Primary_DNS ua="na"></Primary_DNS>
-<Secondary_DNS ua="na"></Secondary_DNS>
-<DNS_Server_Order ua="na">DHCP,Manual</DNS_Server_Order>
-<DNS_Query_Mode ua="na">Sequential</DNS_Query_Mode>
<Syslog_Server ua="na"><%= web_server %></Syslog_Server>
<Debug_Server ua="na"><%= web_server %></Debug_Server>
-<Debug_Level ua="na">0</Debug_Level>
-
-<Primary_NTP_Server ua="na"></Primary_NTP_Server>
-<Secondary_NTP_Server ua="na"></Secondary_NTP_Server>
-
-
-
-<Provision_Enable ua="na">Yes</Provision_Enable>
-<Resync_On_Reset ua="na">Yes</Resync_On_Reset>
-<% -- Resync at a particular time of day, not periodically. (24-hour format hhmm) %>
-<Resync_At ua="na">0200</Resync_At>
-<% -- Resync_Periodic is disabled because of using Resync_At instead %>
-<Resync_Periodic ua="na"></Resync_Periodic>
-
-<Resync_Random_Delay ua="na">10</Resync_Random_Delay>
-<Resync_Error_Retry_Delay ua="na">900</Resync_Error_Retry_Delay>
-<% -- Do not resync during a call, unless the call lasts longer than 3 hours %>
-<Forced_Resync_Delay ua="na">10800</Forced_Resync_Delay>
-
-<Resync_From_SIP ua="na">Yes</Resync_From_SIP>
-<Resync_After_Upgrade_Attempt ua="na">Yes</Resync_After_Upgrade_Attempt>
-
-<Resync_Trigger_1 ua="na"></Resync_Trigger_1>
-
-<Resync_Fails_On_FNF>No</Resync_Fails_On_FNF>
-
-
-
-<Profile_Rule ua="na">
-http://<% io.write(web_server) %>/Linksys/$MA.xml
-</Profile_Rule>
-
-<Profile_Rule_B ua="na">
-</Profile_Rule_B>
-
-<Profile_Rule_C ua="na">
-</Profile_Rule_C>
-<Profile_Rule_D ua="na"></Profile_Rule_D>
-<Resync_Trigger_2 ua="na"></Resync_Trigger_2>
-
-<Log_Resync_Request_Msg ua="na">$PN $MAC -- Requesting resync $SCHEME://$SERVIP:$PORT$PATH</Log_Resync_Request_Msg>
-<Log_Resync_Success_Msg ua="na">$PN $MAC -- Successful resync $SCHEME://$SERVIP:$PORT$PATH</Log_Resync_Success_Msg>
-<Log_Resync_Failure_Msg ua="na">$PN $MAC -- Resync failed: $ERR</Log_Resync_Failure_Msg>
-
-<Report_Rule ua="na"></Report_Rule>
-
-
-<Upgrade_Enable ua="na">Yes</Upgrade_Enable>
-<Upgrade_Error_Retry_Delay ua="na">7200</Upgrade_Error_Retry_Delay>
-
-<Downgrade_Rev_Limit ua="na"></Downgrade_Rev_Limit>
-
-
-
-<Upgrade_Rule ua="na">
-(!5.1.6)?http://<% io.write(web_server) %>/pap2t-5-1-6.bin
-</Upgrade_Rule>
-
-
-<Log_Upgrade_Request_Msg ua="na">$PN $MAC -- Requesting upgrade $SCHEME://$SERVIP:$PORT$PATH</Log_Upgrade_Request_Msg>
-<Log_Upgrade_Success_Msg ua="na">$PN $MAC -- Successful upgrade $SCHEME://$SERVIP:$PORT$PATH -- $ERR</Log_Upgrade_Success_Msg>
-<Log_Upgrade_Failure_Msg ua="na">$PN $MAC -- Upgrade failed: $ERR</Log_Upgrade_Failure_Msg>
-
-
-
-<Max_Forward ua="na">70</Max_Forward>
-<Max_Redirection ua="na">5</Max_Redirection>
-<Max_Auth ua="na">2</Max_Auth>
-<SIP_User_Agent_Name ua="na">$MAU $VERSION</SIP_User_Agent_Name>
-<SIP_Server_Name ua="na">$MAU $VERSION</SIP_Server_Name>
-
-<SIP_Accept_Language ua="na"></SIP_Accept_Language>
-<DTMF_Relay_MIME_Type ua="na">application/dtmf-relay</DTMF_Relay_MIME_Type>
-<Hook_Flash_MIME_Type ua="na">application/hook-flash</Hook_Flash_MIME_Type>
-<Remove_Last_Reg ua="na">No</Remove_Last_Reg>
-<Use_Compact_Header ua="na">No</Use_Compact_Header>
-
-
-
-<SIP_T1 ua="na">2</SIP_T1>
-<SIP_T2 ua="na">32</SIP_T2>
-<SIP_T4 ua="na">5</SIP_T4>
-<SIP_Timer_B ua="na">6</SIP_Timer_B>
-<SIP_Timer_F ua="na">31</SIP_Timer_F>
-<SIP_Timer_H ua="na">32</SIP_Timer_H>
-<SIP_Timer_D ua="na">32</SIP_Timer_D>
-<SIP_Timer_J ua="na">32</SIP_Timer_J>
-<INVITE_Expires ua="na">240</INVITE_Expires>
-<ReINVITE_Expires ua="na">30</ReINVITE_Expires>
-<Reg_Min_Expires ua="na">1</Reg_Min_Expires>
-<Reg_Max_Expires ua="na">7200</Reg_Max_Expires>
-<Reg_Retry_Intvl ua="na">60</Reg_Retry_Intvl>
-<Reg_Retry_Long_Intvl ua="na">60</Reg_Retry_Long_Intvl>
-
-
-
-<SIT1_RSC ua="na"></SIT1_RSC>
-<SIT2_RSC ua="na"></SIT2_RSC>
-<SIT3_RSC ua="na"></SIT3_RSC>
-<SIT4_RSC ua="na"></SIT4_RSC>
-
-<Try_Backup_RSC ua="na"></Try_Backup_RSC>
-<Retry_Reg_RSC ua="na"></Retry_Reg_RSC>
-
-
-
-<RTP_Port_Min ua="na">10050</RTP_Port_Min>
-<RTP_Port_Max ua="na">16384</RTP_Port_Max>
-<Max_RTP_ICMP_Err ua="na">0</Max_RTP_ICMP_Err>
-<RTCP_Tx_Interval ua="na">5</RTCP_Tx_Interval>
-
-
-
-<NSE_Dynamic_Payload ua="na">100</NSE_Dynamic_Payload>
-<AVT_Dynamic_Payload ua="na">101</AVT_Dynamic_Payload>
-<G726r16_Dynamic_Payload ua="na">98</G726r16_Dynamic_Payload>
-<G726r24_Dynamic_Payload ua="na">97</G726r24_Dynamic_Payload>
-<G726r40_Dynamic_Payload ua="na">96</G726r40_Dynamic_Payload>
-<G729b_Dynamic_Payload ua="na">99</G729b_Dynamic_Payload>
-
-<NSE_Codec_Name ua="na">NSE</NSE_Codec_Name>
-<AVT_Codec_Name ua="na">telephone-event</AVT_Codec_Name>
-<G711u_Codec_Name ua="na">PCMU</G711u_Codec_Name>
-<G711a_Codec_Name ua="na">PCMA</G711a_Codec_Name>
-<G726r16_Codec_Name ua="na">G726-16</G726r16_Codec_Name>
-<G726r24_Codec_Name ua="na">G726-24</G726r24_Codec_Name>
-<G726r32_Codec_Name ua="na">G726-32</G726r32_Codec_Name>
-<G726r40_Codec_Name ua="na">G726-40</G726r40_Codec_Name>
-<G729a_Codec_Name ua="na">G729</G729a_Codec_Name>
-<G729b_Codec_Name ua="na">G729ab</G729b_Codec_Name>
-<G723_Codec_Name ua="na">G723</G723_Codec_Name>
-
-
-
-<Handle_VIA_received ua="na">Yes</Handle_VIA_received>
-<Handle_VIA_rport ua="na">Yes</Handle_VIA_rport>
-<Insert_VIA_received ua="na">Yes</Insert_VIA_received>
-<Insert_VIA_rport ua="na">Yes</Insert_VIA_rport>
-<Substitute_VIA_Addr ua="na">Yes</Substitute_VIA_Addr>
-<Send_Resp_To_Src_Port ua="na">No</Send_Resp_To_Src_Port>
-<STUN_Enable ua="na">No</STUN_Enable>
-<STUN_Test_Enable ua="na">No</STUN_Test_Enable>
-<STUN_Server ua="na"></STUN_Server>
-<EXT_IP ua="na"></EXT_IP>
-<EXT_RTP_Port_Min ua="na"></EXT_RTP_Port_Min>
-<NAT_Keep_Alive_Intvl ua="na">15</NAT_Keep_Alive_Intvl>
-
-
-
-
-
-
-
<Line_Enable_1_ ua="na">Yes</Line_Enable_1_>
-
-<SAS_Enable_1_ ua="na">No</SAS_Enable_1_>
<MOH_Server_1_ ua="na"><% io.write(moh) %></MOH_Server_1_>
-<SAS_DLG_Refresh_Intvl_1_ ua="na">30</SAS_DLG_Refresh_Intvl_1_>
-<NAT_Mapping_Enable_1_ ua="na">No</NAT_Mapping_Enable_1_>
-<SAS_Inbound_RTP_Sink_1_ ua="na"></SAS_Inbound_RTP_Sink_1_>
-
-<SIP_Port_1_ ua="na">5060</SIP_Port_1_>
-
-<NAT_Keep_Alive_Enable_1_ ua="na">No</NAT_Keep_Alive_Enable_1_>
-<EXT_SIP_Port_1_ ua="na"></EXT_SIP_Port_1_>
-<NAT_Keep_Alive_Msg_1_ ua="na">$NOTIFY</NAT_Keep_Alive_Msg_1_>
-<SIP_TOS_DiffServ_Value_1_ ua="na">0x68</SIP_TOS_DiffServ_Value_1_>
-<NAT_Keep_Alive_Dest_1_ ua="na">$PROXY</NAT_Keep_Alive_Dest_1_>
-<RTP_TOS_DiffServ_Value_1_ ua="na">0xb8</RTP_TOS_DiffServ_Value_1_>
-
-
-
-<SIP_Debug_Option_1_ ua="na"></SIP_Debug_Option_1_>
-
-<Network_Jitter_Level_1_ ua="na">very high</Network_Jitter_Level_1_>
-<Jitter_Buffer_Adjustment_1_ ua="na">disable</Jitter_Buffer_Adjustment_1_>
-<SIP_100REL_Enable_1_ ua="na">Yes</SIP_100REL_Enable_1_>
-<Blind_Attn-Xfer_Enable_1_ ua="na">Yes</Blind_Attn-Xfer_Enable_1_>
-<Auth_Resync-Reboot_1_ ua="na">No</Auth_Resync-Reboot_1_>
-<Xfer_When_Hangup_Conf_1_ ua="na">Yes</Xfer_When_Hangup_Conf_1_>
-
-
-<RTP_Log_Intvl_1_ ua="na">0</RTP_Log_Intvl_1_>
-<Restrict_Source_IP_1_ ua="na">No</Restrict_Source_IP_1_>
-
-
-
-
<Proxy_1_ ua="na"><% io.write(server) %></Proxy_1_>
-
-<Use_Outbound_Proxy_1_ ua="na">No</Use_Outbound_Proxy_1_>
-<Outbound_Proxy_1_ ua="na"></Outbound_Proxy_1_>
-<Use_OB_Proxy_In_Dialog_1_ ua="na">Yes</Use_OB_Proxy_In_Dialog_1_>
-
<Register_1_ ua="na">Yes</Register_1_>
<Make_Call_Without_Reg_1_ ua="na">No</Make_Call_Without_Reg_1_>
-<Register_Expires_1_ ua="na">60</Register_Expires_1_>
-<Ans_Call_Without_Reg_1_ ua="na">Yes</Ans_Call_Without_Reg_1_>
-<Use_DNS_SRV_1_ ua="na">Yes</Use_DNS_SRV_1_>
-<DNS_SRV_Auto_Prefix_1_ ua="na">Yes</DNS_SRV_Auto_Prefix_1_>
-<Proxy_Fallback_Intvl_1_ ua="na">3600</Proxy_Fallback_Intvl_1_>
-<Voice_Mail_Server_1_ ua="na"></Voice_Mail_Server_1_>
-
-
-
<Display_Name_1_ ua="na"><%= cid %></Display_Name_1_>
<User_ID_1_ ua="na"><% io.write(values.reg1.extension) %></User_ID_1_>
<Password_1_ ua="na"><% io.write(values.reg1.password) %></Password_1_>
-<Use_Auth_ID_1_ ua="na">No</Use_Auth_ID_1_>
-<Auth_ID_1_ ua="na"></Auth_ID_1_>
-<Mini_Certificate_1_ ua="na"></Mini_Certificate_1_>
-<SRTP_Private_Key_1_ ua="na"></SRTP_Private_Key_1_>
-
-
<Call_Waiting_Serv_1_ ua="na"><%= yesno(values.services and values.services.callwaitingenable) %></Call_Waiting_Serv_1_>
-<Block_CID_Serv_1_ ua="na">No</Block_CID_Serv_1_>
-<Block_ANC_Serv_1_ ua="na">No</Block_ANC_Serv_1_>
-<Dist_Ring_Serv_1_ ua="na">Yes</Dist_Ring_Serv_1_>
-<Cfwd_All_Serv_1_ ua="na">Yes</Cfwd_All_Serv_1_>
-<Cfwd_Busy_Serv_1_ ua="na">Yes</Cfwd_Busy_Serv_1_>
-<Cfwd_No_Ans_Serv_1_ ua="na">Yes</Cfwd_No_Ans_Serv_1_>
-<Cfwd_Sel_Serv_1_ ua="na">No</Cfwd_Sel_Serv_1_>
-<Cfwd_Last_Serv_1_ ua="na">No</Cfwd_Last_Serv_1_>
-<Block_Last_Serv_1_ ua="na">No</Block_Last_Serv_1_>
-<Accept_Last_Serv_1_ ua="na">No</Accept_Last_Serv_1_>
-<DND_Serv_1_ ua="na">No</DND_Serv_1_>
-<CID_Serv_1_ ua="na">Yes</CID_Serv_1_>
-<CWCID_Serv_1_ ua="na">Yes</CWCID_Serv_1_>
-<Call_Return_Serv_1_ ua="na">No</Call_Return_Serv_1_>
-<Call_Back_Serv_1_ ua="na">Yes</Call_Back_Serv_1_>
-<Three_Way_Call_Serv_1_ ua="na">Yes</Three_Way_Call_Serv_1_>
-<Three_Way_Conf_Serv_1_ ua="na">Yes</Three_Way_Conf_Serv_1_>
-<Attn_Transfer_Serv_1_ ua="na">Yes</Attn_Transfer_Serv_1_>
-<Unattn_Transfer_Serv_1_ ua="na">Yes</Unattn_Transfer_Serv_1_>
-<MWI_Serv_1_ ua="na">Yes</MWI_Serv_1_>
-<VMWI_Serv_1_ ua="na">Yes</VMWI_Serv_1_>
-<Speed_Dial_Serv_1_ ua="na">No</Speed_Dial_Serv_1_>
-<Secure_Call_Serv_1_ ua="na">No</Secure_Call_Serv_1_>
-<Referral_Serv_1_ ua="na">No</Referral_Serv_1_>
-<Feature_Dial_Serv_1_ ua="na">Yes</Feature_Dial_Serv_1_>
-
-
-
-<Preferred_Codec_1_ ua="na">G711u</Preferred_Codec_1_>
-<Silence_Supp_Enable_1_ ua="na">No</Silence_Supp_Enable_1_>
-<Use_Pref_Codec_Only_1_ ua="na">Yes</Use_Pref_Codec_Only_1_>
-<Silence_Threshold_1_ ua="na">medium</Silence_Threshold_1_>
-<Echo_Canc_Enable_1_ ua="na">Yes</Echo_Canc_Enable_1_>
-<G729a_Enable_1_ ua="na">No</G729a_Enable_1_>
-<Echo_Canc_Adapt_Enable_1_ ua="na">Yes</Echo_Canc_Adapt_Enable_1_>
-<G723_Enable_1_ ua="na">No</G723_Enable_1_>
-<Echo_Supp_Enable_1_ ua="na">Yes</Echo_Supp_Enable_1_>
-<G726-16_Enable_1_ ua="na">No</G726-16_Enable_1_>
-<FAX_CED_Detect_Enable_1_ ua="na">Yes</FAX_CED_Detect_Enable_1_>
-<G726-24_Enable_1_ ua="na">No</G726-24_Enable_1_>
-<FAX_CNG_Detect_Enable_1_ ua="na">Yes</FAX_CNG_Detect_Enable_1_>
-<G726-32_Enable_1_ ua="na">Yes</G726-32_Enable_1_>
-<FAX_Passthru_Codec_1_ ua="na">G711u</FAX_Passthru_Codec_1_>
-<G726-40_Enable_1_ ua="na">No</G726-40_Enable_1_>
-<FAX_Codec_Symmetric_1_ ua="na">Yes</FAX_Codec_Symmetric_1_>
-<DTMF_Tx_Method_1_ ua="na">Auto</DTMF_Tx_Method_1_>
-<FAX_Passthru_Method_1_ ua="na">ReINVITE</FAX_Passthru_Method_1_>
-<Hook_Flash_Tx_Method_1_ ua="na">None</Hook_Flash_Tx_Method_1_>
-<FAX_Process_NSE_1_ ua="na">Yes</FAX_Process_NSE_1_>
-<Release_Unused_Codec_1_ ua="na">No</Release_Unused_Codec_1_>
-
<Dial_Plan_1_ ua="na"><% io.write(dialpattern) %></Dial_Plan_1_>
-<Enable_IP_Dialing_1_ ua="na">No</Enable_IP_Dialing_1_>
-
-
-
-<Idle_Polarity_1_ ua="na">Forward</Idle_Polarity_1_>
-<Caller_Conn_Polarity_1_ ua="na">Forward</Caller_Conn_Polarity_1_>
-<Callee_Conn_Polarity_1_ ua="na">Forward</Callee_Conn_Polarity_1_>
-
-
<%
if values.services and values.services.forwarding and values.reg1 then
local pg_t = values.reg1
@@ -369,471 +82,4 @@ http://<% io.write(web_server) %>/Linksys/$MA.xml
end
%>
-
-<Cfwd_Sel1_Caller_1_ ua="na"></Cfwd_Sel1_Caller_1_>
-<Cfwd_Sel1_Dest_1_ ua="na"></Cfwd_Sel1_Dest_1_>
-<Cfwd_Sel2_Caller_1_ ua="na"></Cfwd_Sel2_Caller_1_>
-<Cfwd_Sel2_Dest_1_ ua="na"></Cfwd_Sel2_Dest_1_>
-<Cfwd_Sel3_Caller_1_ ua="na"></Cfwd_Sel3_Caller_1_>
-<Cfwd_Sel3_Dest_1_ ua="na"></Cfwd_Sel3_Dest_1_>
-<Cfwd_Sel4_Caller_1_ ua="na"></Cfwd_Sel4_Caller_1_>
-<Cfwd_Sel4_Dest_1_ ua="na"></Cfwd_Sel4_Dest_1_>
-<Cfwd_Sel5_Caller_1_ ua="na"></Cfwd_Sel5_Caller_1_>
-<Cfwd_Sel5_Dest_1_ ua="na"></Cfwd_Sel5_Dest_1_>
-<Cfwd_Sel6_Caller_1_ ua="na"></Cfwd_Sel6_Caller_1_>
-<Cfwd_Sel6_Dest_1_ ua="na"></Cfwd_Sel6_Dest_1_>
-<Cfwd_Sel7_Caller_1_ ua="na"></Cfwd_Sel7_Caller_1_>
-<Cfwd_Sel7_Dest_1_ ua="na"></Cfwd_Sel7_Dest_1_>
-<Cfwd_Sel8_Caller_1_ ua="na"></Cfwd_Sel8_Caller_1_>
-<Cfwd_Sel8_Dest_1_ ua="na"></Cfwd_Sel8_Dest_1_>
-
-<Cfwd_Last_Caller_1_ ua="na"></Cfwd_Last_Caller_1_>
-<Cfwd_Last_Dest_1_ ua="na"></Cfwd_Last_Dest_1_>
-<Block_Last_Caller_1_ ua="na"></Block_Last_Caller_1_>
-<Accept_Last_Caller_1_ ua="na"></Accept_Last_Caller_1_>
-
-
-
-<Speed_Dial_2_1_ ua="na"></Speed_Dial_2_1_>
-<Speed_Dial_3_1_ ua="na"></Speed_Dial_3_1_>
-<Speed_Dial_4_1_ ua="na"></Speed_Dial_4_1_>
-<Speed_Dial_5_1_ ua="na"></Speed_Dial_5_1_>
-<Speed_Dial_6_1_ ua="na"></Speed_Dial_6_1_>
-<Speed_Dial_7_1_ ua="na"></Speed_Dial_7_1_>
-<Speed_Dial_8_1_ ua="na"></Speed_Dial_8_1_>
-<Speed_Dial_9_1_ ua="na"></Speed_Dial_9_1_>
-
-
-
-
-<Block_CID_Setting_1_ ua="na">No</Block_CID_Setting_1_>
-<Block_ANC_Setting_1_ ua="na">No</Block_ANC_Setting_1_>
-<DND_Setting_1_ ua="na">No</DND_Setting_1_>
-<CID_Setting_1_ ua="na">Yes</CID_Setting_1_>
-<CWCID_Setting_1_ ua="na">Yes</CWCID_Setting_1_>
-<Dist_Ring_Setting_1_ ua="na">Yes</Dist_Ring_Setting_1_>
-<Secure_Call_Setting_1_ ua="na">No</Secure_Call_Setting_1_>
-
-<Message_Waiting_1_ ua="na">No</Message_Waiting_1_>
-
-
-
-<Ring1_Caller_1_ ua="na"></Ring1_Caller_1_>
-<Ring2_Caller_1_ ua="na"></Ring2_Caller_1_>
-<Ring3_Caller_1_ ua="na"></Ring3_Caller_1_>
-<Ring4_Caller_1_ ua="na"></Ring4_Caller_1_>
-<Ring5_Caller_1_ ua="na"></Ring5_Caller_1_>
-<Ring6_Caller_1_ ua="na"></Ring6_Caller_1_>
-<Ring7_Caller_1_ ua="na"></Ring7_Caller_1_>
-<Ring8_Caller_1_ ua="na"></Ring8_Caller_1_>
-
-
-
-<Default_Ring_1_ ua="na">1</Default_Ring_1_>
-<Default_CWT_1_ ua="na">1</Default_CWT_1_>
-<Hold_Reminder_Ring_1_ ua="na">8</Hold_Reminder_Ring_1_>
-<Call_Back_Ring_1_ ua="na"></Call_Back_Ring_1_>
-
-<Cfwd_Ring_Splash_Len_1_ ua="na">0</Cfwd_Ring_Splash_Len_1_>
-<Cblk_Ring_Splash_Len_1_ ua="na">0</Cblk_Ring_Splash_Len_1_>
-<VMWI_Ring_Splash_Len_1_ ua="na">0</VMWI_Ring_Splash_Len_1_>
-<VMWI_Ring_Policy_1_ ua="na">New VM Available</VMWI_Ring_Policy_1_>
-<Ring_On_No_New_VM_1_ ua="na">No</Ring_On_No_New_VM_1_>
-
-
-
-
-<Line_Enable_2_ ua="na">No</Line_Enable_2_>
-
-<SAS_Enable_2_ ua="na">No</SAS_Enable_2_>
-<MOH_Server_2_ ua="na"></MOH_Server_2_>
-<SAS_DLG_Refresh_Intvl_2_ ua="na">30</SAS_DLG_Refresh_Intvl_2_>
-<NAT_Mapping_Enable_2_ ua="na">No</NAT_Mapping_Enable_2_>
-<SAS_Inbound_RTP_Sink_2_ ua="na"></SAS_Inbound_RTP_Sink_2_>
-
-<SIP_Port_2_ ua="na">5060</SIP_Port_2_>
-
-<NAT_Keep_Alive_Enable_2_ ua="na">Yes</NAT_Keep_Alive_Enable_2_>
-<EXT_SIP_Port_2_ ua="na"></EXT_SIP_Port_2_>
-<NAT_Keep_Alive_Msg_2_ ua="na">$NOTIFY</NAT_Keep_Alive_Msg_2_>
-<SIP_TOS_DiffServ_Value_2_ ua="na">0x68</SIP_TOS_DiffServ_Value_2_>
-<NAT_Keep_Alive_Dest_2_ ua="na">$PROXY</NAT_Keep_Alive_Dest_2_>
-<RTP_TOS_DiffServ_Value_2_ ua="na">0xb8</RTP_TOS_DiffServ_Value_2_>
-
-
-
-<SIP_Debug_Option_2_ ua="na"></SIP_Debug_Option_2_>
-
-
-
-<Network_Jitter_Level_2_ ua="na">high</Network_Jitter_Level_2_>
-<SIP_100REL_Enable_2_ ua="na">No</SIP_100REL_Enable_2_>
-<Blind_Attn-Xfer_Enable_2_ ua="na">No</Blind_Attn-Xfer_Enable_2_>
-<Auth_Resync-Reboot_2_ ua="na">No</Auth_Resync-Reboot_2_>
-<Xfer_When_Hangup_Conf_2_ ua="na">No</Xfer_When_Hangup_Conf_2_>
-
-
-<RTP_Log_Intvl_2_ ua="na">0</RTP_Log_Intvl_2_>
-<Restrict_Source_IP_2_ ua="na">No</Restrict_Source_IP_2_>
-
-
-
-
-<Proxy_2_ ua="na"></Proxy_2_>
-
-<Use_Outbound_Proxy_2_ ua="na">No</Use_Outbound_Proxy_2_>
-<Outbound_Proxy_2_ ua="na"></Outbound_Proxy_2_>
-<Use_OB_Proxy_In_Dialog_2_ ua="na">Yes</Use_OB_Proxy_In_Dialog_2_>
-
-<Register_2_ ua="na">Yes</Register_2_>
-<Make_Call_Without_Reg_2_ ua="na">No</Make_Call_Without_Reg_2_>
-
-<Register_Expires_2_ ua="na">60</Register_Expires_2_>
-<Ans_Call_Without_Reg_2_ ua="na">Yes</Ans_Call_Without_Reg_2_>
-<Use_DNS_SRV_2_ ua="na">No</Use_DNS_SRV_2_>
-<DNS_SRV_Auto_Prefix_2_ ua="na">No</DNS_SRV_Auto_Prefix_2_>
-<Proxy_Fallback_Intvl_2_ ua="na">3600</Proxy_Fallback_Intvl_2_>
-<Voice_Mail_Server_2_ ua="na">2147483647</Voice_Mail_Server_2_>
-
-
-
-<Display_Name_2_ ua="na"></Display_Name_2_>
-<User_ID_2_ ua="na"></User_ID_2_>
-<Password_2_ ua="na"></Password_2_>
-<Use_Auth_ID_2_ ua="na">No</Use_Auth_ID_2_>
-<Auth_ID_2_ ua="na"></Auth_ID_2_>
-<Mini_Certificate_2_ ua="na"></Mini_Certificate_2_>
-<SRTP_Private_Key_2_ ua="na"></SRTP_Private_Key_2_>
-
-
-
-<Call_Waiting_Serv_2_ ua="na">Yes</Call_Waiting_Serv_2_>
-<Block_CID_Serv_2_ ua="na">Yes</Block_CID_Serv_2_>
-<Block_ANC_Serv_2_ ua="na">No</Block_ANC_Serv_2_>
-<Dist_Ring_Serv_2_ ua="na">Yes</Dist_Ring_Serv_2_>
-<Cfwd_All_Serv_2_ ua="na">No</Cfwd_All_Serv_2_>
-<Cfwd_Busy_Serv_2_ ua="na">No</Cfwd_Busy_Serv_2_>
-<Cfwd_No_Ans_Serv_2_ ua="na">No</Cfwd_No_Ans_Serv_2_>
-<Cfwd_Sel_Serv_2_ ua="na">No</Cfwd_Sel_Serv_2_>
-<Cfwd_Last_Serv_2_ ua="na">No</Cfwd_Last_Serv_2_>
-<Block_Last_Serv_2_ ua="na">No</Block_Last_Serv_2_>
-<Accept_Last_Serv_2_ ua="na">No</Accept_Last_Serv_2_>
-<DND_Serv_2_ ua="na">No</DND_Serv_2_>
-<CID_Serv_2_ ua="na">Yes</CID_Serv_2_>
-<CWCID_Serv_2_ ua="na">Yes</CWCID_Serv_2_>
-<Call_Return_Serv_2_ ua="na">No</Call_Return_Serv_2_>
-<Call_Back_Serv_2_ ua="na">Yes</Call_Back_Serv_2_>
-<Three_Way_Call_Serv_2_ ua="na">Yes</Three_Way_Call_Serv_2_>
-<Three_Way_Conf_Serv_2_ ua="na">Yes</Three_Way_Conf_Serv_2_>
-<Attn_Transfer_Serv_2_ ua="na">Yes</Attn_Transfer_Serv_2_>
-<Unattn_Transfer_Serv_2_ ua="na">Yes</Unattn_Transfer_Serv_2_>
-<MWI_Serv_2_ ua="na">Yes</MWI_Serv_2_>
-<VMWI_Serv_2_ ua="na">Yes</VMWI_Serv_2_>
-<Speed_Dial_Serv_2_ ua="na">No</Speed_Dial_Serv_2_>
-<Secure_Call_Serv_2_ ua="na">No</Secure_Call_Serv_2_>
-<Referral_Serv_2_ ua="na">No</Referral_Serv_2_>
-<Feature_Dial_Serv_2_ ua="na">Yes</Feature_Dial_Serv_2_>
-
-
-
-<Preferred_Codec_2_ ua="na">G711u</Preferred_Codec_2_>
-<Silence_Supp_Enable_2_ ua="na">No</Silence_Supp_Enable_2_>
-<Use_Pref_Codec_Only_2_ ua="na">Yes</Use_Pref_Codec_Only_2_>
-<Silence_Threshold_2_ ua="na">medium</Silence_Threshold_2_>
-<Echo_Canc_Enable_2_ ua="na">Yes</Echo_Canc_Enable_2_>
-<G729a_Enable_2_ ua="na">Yes</G729a_Enable_2_>
-<Echo_Canc_Adapt_Enable_2_ ua="na">Yes</Echo_Canc_Adapt_Enable_2_>
-<G723_Enable_2_ ua="na">No</G723_Enable_2_>
-<Echo_Supp_Enable_2_ ua="na">Yes</Echo_Supp_Enable_2_>
-<G726-16_Enable_2_ ua="na">No</G726-16_Enable_2_>
-<FAX_CED_Detect_Enable_2_ ua="na">Yes</FAX_CED_Detect_Enable_2_>
-<G726-24_Enable_2_ ua="na">No</G726-24_Enable_2_>
-<FAX_CNG_Detect_Enable_2_ ua="na">Yes</FAX_CNG_Detect_Enable_2_>
-<G726-32_Enable_2_ ua="na">Yes</G726-32_Enable_2_>
-<FAX_Passthru_Codec_2_ ua="na">G711u</FAX_Passthru_Codec_2_>
-<G726-40_Enable_2_ ua="na">No</G726-40_Enable_2_>
-<FAX_Codec_Symmetric_2_ ua="na">Yes</FAX_Codec_Symmetric_2_>
-<DTMF_Tx_Method_2_ ua="na">Auto</DTMF_Tx_Method_2_>
-<FAX_Passthru_Method_2_ ua="na">ReINVITE</FAX_Passthru_Method_2_>
-<Hook_Flash_Tx_Method_2_ ua="na">None</Hook_Flash_Tx_Method_2_>
-<FAX_Process_NSE_2_ ua="na">Yes</FAX_Process_NSE_2_>
-<Release_Unused_Codec_2_ ua="na">Yes</Release_Unused_Codec_2_>
-
-
-
-<Dial_Plan_2_ ua="na">(&lt;:1123&gt;[2-9]xxxxxxS0|&lt;411:18003733411&gt;|*xx|[369]11S0|0|00|011[2-9]x.|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)</Dial_Plan_2_>
-
-<Enable_IP_Dialing_2_ ua="na">No</Enable_IP_Dialing_2_>
-
-
-
-<Idle_Polarity_2_ ua="na">Forward</Idle_Polarity_2_>
-<Caller_Conn_Polarity_2_ ua="na">Forward</Caller_Conn_Polarity_2_>
-<Callee_Conn_Polarity_2_ ua="na">Forward</Callee_Conn_Polarity_2_>
-
-
-
-<Cfwd_All_Dest_2_ ua="na"></Cfwd_All_Dest_2_>
-<Cfwd_Busy_Dest_2_ ua="na"></Cfwd_Busy_Dest_2_>
-<Cfwd_No_Ans_Dest_2_ ua="na"></Cfwd_No_Ans_Dest_2_>
-<Cfwd_No_Ans_Delay_2_ ua="na"></Cfwd_No_Ans_Delay_2_>
-
-
-
-<Cfwd_Sel1_Caller_2_ ua="na"></Cfwd_Sel1_Caller_2_>
-<Cfwd_Sel1_Dest_2_ ua="na"></Cfwd_Sel1_Dest_2_>
-<Cfwd_Sel2_Caller_2_ ua="na"></Cfwd_Sel2_Caller_2_>
-<Cfwd_Sel2_Dest_2_ ua="na"></Cfwd_Sel2_Dest_2_>
-<Cfwd_Sel3_Caller_2_ ua="na"></Cfwd_Sel3_Caller_2_>
-<Cfwd_Sel3_Dest_2_ ua="na"></Cfwd_Sel3_Dest_2_>
-<Cfwd_Sel4_Caller_2_ ua="na"></Cfwd_Sel4_Caller_2_>
-<Cfwd_Sel4_Dest_2_ ua="na"></Cfwd_Sel4_Dest_2_>
-<Cfwd_Sel5_Caller_2_ ua="na"></Cfwd_Sel5_Caller_2_>
-<Cfwd_Sel5_Dest_2_ ua="na"></Cfwd_Sel5_Dest_2_>
-<Cfwd_Sel6_Caller_2_ ua="na"></Cfwd_Sel6_Caller_2_>
-<Cfwd_Sel6_Dest_2_ ua="na"></Cfwd_Sel6_Dest_2_>
-<Cfwd_Sel7_Caller_2_ ua="na"></Cfwd_Sel7_Caller_2_>
-<Cfwd_Sel7_Dest_2_ ua="na"></Cfwd_Sel7_Dest_2_>
-<Cfwd_Sel8_Caller_2_ ua="na"></Cfwd_Sel8_Caller_2_>
-<Cfwd_Sel8_Dest_2_ ua="na"></Cfwd_Sel8_Dest_2_>
-
-<Cfwd_Last_Caller_2_ ua="na"></Cfwd_Last_Caller_2_>
-<Cfwd_Last_Dest_2_ ua="na"></Cfwd_Last_Dest_2_>
-<Block_Last_Caller_2_ ua="na"></Block_Last_Caller_2_>
-<Accept_Last_Caller_2_ ua="na"></Accept_Last_Caller_2_>
-
-
-
-<Speed_Dial_2_2_ ua="na"></Speed_Dial_2_2_>
-<Speed_Dial_3_2_ ua="na"></Speed_Dial_3_2_>
-<Speed_Dial_4_2_ ua="na"></Speed_Dial_4_2_>
-<Speed_Dial_5_2_ ua="na"></Speed_Dial_5_2_>
-<Speed_Dial_6_2_ ua="na"></Speed_Dial_6_2_>
-<Speed_Dial_7_2_ ua="na"></Speed_Dial_7_2_>
-<Speed_Dial_8_2_ ua="na"></Speed_Dial_8_2_>
-<Speed_Dial_9_2_ ua="na"></Speed_Dial_9_2_>
-
-
-
-
-<Block_CID_Setting_2_ ua="na">No</Block_CID_Setting_2_>
-<Block_ANC_Setting_2_ ua="na">No</Block_ANC_Setting_2_>
-<DND_Setting_2_ ua="na">No</DND_Setting_2_>
-<CID_Setting_2_ ua="na">Yes</CID_Setting_2_>
-<CWCID_Setting_2_ ua="na">Yes</CWCID_Setting_2_>
-<Dist_Ring_Setting_2_ ua="na">Yes</Dist_Ring_Setting_2_>
-<Secure_Call_Setting_2_ ua="na">No</Secure_Call_Setting_2_>
-
-<Message_Waiting_2_ ua="na"/>
-
-
-
-<Ring1_Caller_2_ ua="na"></Ring1_Caller_2_>
-<Ring2_Caller_2_ ua="na"></Ring2_Caller_2_>
-<Ring3_Caller_2_ ua="na"></Ring3_Caller_2_>
-<Ring4_Caller_2_ ua="na"></Ring4_Caller_2_>
-<Ring5_Caller_2_ ua="na"></Ring5_Caller_2_>
-<Ring6_Caller_2_ ua="na"></Ring6_Caller_2_>
-<Ring7_Caller_2_ ua="na"></Ring7_Caller_2_>
-<Ring8_Caller_2_ ua="na"></Ring8_Caller_2_>
-
-
-
-<Default_Ring_2_ ua="na">1</Default_Ring_2_>
-<Default_CWT_2_ ua="na">1</Default_CWT_2_>
-<Hold_Reminder_Ring_2_ ua="na">8</Hold_Reminder_Ring_2_>
-<Call_Back_Ring_2_ ua="na"></Call_Back_Ring_2_>
-
-<Cfwd_Ring_Splash_Len_2_ ua="na">0</Cfwd_Ring_Splash_Len_2_>
-<Cblk_Ring_Splash_Len_2_ ua="na">0</Cblk_Ring_Splash_Len_2_>
-<VMWI_Ring_Splash_Len_2_ ua="na">0</VMWI_Ring_Splash_Len_2_>
-<VMWI_Ring_Policy_2_ ua="na">New VM Available</VMWI_Ring_Policy_2_>
-<Ring_On_No_New_VM_2_ ua="na">No</Ring_On_No_New_VM_2_>
-
-
-<CW_Setting_1_ ua="na">1</CW_Setting_1_>
-<CW_Setting_2_ ua="na">1</CW_Setting_2_>
-
-<RTP_Packet_Size ua="na">.020</RTP_Packet_Size>
-
-
-<Dial_Tone ua="na">350@-19,440@-19;10(*/0/1+2)</Dial_Tone>
-<Second_Dial_Tone ua="na">350@-19,440@-19;10(*/0/1+2)</Second_Dial_Tone>
-<Outside_Dial_Tone ua="na">350@-19,440@-19;10(*/0/1+2)</Outside_Dial_Tone>
-<Prompt_Tone ua="na">350@-19,440@-19;10(*/0/1+2)</Prompt_Tone>
-<Busy_Tone ua="na">480@-19,620@-19;10(.5/.5/1+2)</Busy_Tone>
-<Reorder_Tone ua="na">480@-19,620@-19;10(.25/.25/1+2)</Reorder_Tone>
-<Off_Hook_Warning_Tone ua="na">480@-10,620@0;10(.125/.125/1+2)</Off_Hook_Warning_Tone>
-<Ring_Back_Tone ua="na">440@-19,480@-19;*(2/4/1+2)</Ring_Back_Tone>
-<Confirm_Tone ua="na">600@-16;1(.25/.25/1)</Confirm_Tone>
-<SIT1_Tone ua="na">985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)</SIT1_Tone>
-<SIT2_Tone ua="na">914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)</SIT2_Tone>
-<SIT3_Tone ua="na">914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)</SIT3_Tone>
-<SIT4_Tone ua="na">985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)</SIT4_Tone>
-<MWI_Dial_Tone ua="na">350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)</MWI_Dial_Tone>
-<Cfwd_Dial_Tone ua="na">350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)</Cfwd_Dial_Tone>
-<Holding_Tone ua="na">600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)</Holding_Tone>
-<Conference_Tone ua="na">350@-19;20(.1/.1/1,.1/9.7/1)</Conference_Tone>
-<Secure_Call_Indication_Tone ua="na">397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)</Secure_Call_Indication_Tone>
-
-
-
-<Ring1_Cadence ua="na">60(2/4)</Ring1_Cadence>
-<Ring2_Cadence ua="na">60(.3/.2,1/.2,.3/4)</Ring2_Cadence>
-<Ring3_Cadence ua="na">60(.8/.4,.8/4)</Ring3_Cadence>
-<Ring4_Cadence ua="na">60(.4/.2,.3/.2,.8/4)</Ring4_Cadence>
-<Ring5_Cadence ua="na">60(.2/.2,.2/.2,.2/.2,1/4)</Ring5_Cadence>
-<Ring6_Cadence ua="na">60(.2/.4,.2/.4,.2/4)</Ring6_Cadence>
-<Ring7_Cadence ua="na">60(.4/.2,.4/.2,.4/4)</Ring7_Cadence>
-<Ring8_Cadence ua="na">60(0.25/9.75)</Ring8_Cadence>
-
-
-
-<CWT1_Cadence ua="na">30(.3/3.7)</CWT1_Cadence>
-<CWT2_Cadence ua="na">30(.1/.1, .1/9.7)</CWT2_Cadence>
-<CWT3_Cadence ua="na">30(.1/.1, .3/.1, .1/9.3)</CWT3_Cadence>
-<CWT4_Cadence ua="na">30(.1/.1,.1/.1,.1/9.5)</CWT4_Cadence>
-<CWT5_Cadence ua="na">30(.3/.1,.1/.1,.3/9.1)</CWT5_Cadence>
-<CWT6_Cadence ua="na">30(.1/.1,.3/.2,.3/9.1)</CWT6_Cadence>
-<CWT7_Cadence ua="na">30(.3/.1,.3/.1,.1/9.1)</CWT7_Cadence>
-<CWT8_Cadence ua="na">2.3(.3/2)</CWT8_Cadence>
-
-
-
-<Ring1_Name ua="na">Bellcore-dr1</Ring1_Name>
-<Ring2_Name ua="na">Bellcore-dr2</Ring2_Name>
-<Ring3_Name ua="na">Bellcore-dr3</Ring3_Name>
-<Ring4_Name ua="na">Bellcore-dr4</Ring4_Name>
-<Ring5_Name ua="na">Bellcore-dr5</Ring5_Name>
-<Ring6_Name ua="na">Bellcore-dr6</Ring6_Name>
-<Ring7_Name ua="na">Bellcore-dr7</Ring7_Name>
-<Ring8_Name ua="na">Bellcore-dr8</Ring8_Name>
-
-
-
-<Ring_Waveform ua="na">Sinusoid</Ring_Waveform>
-<Ring_Frequency ua="na">20</Ring_Frequency>
-<Ring_Voltage ua="na">90</Ring_Voltage>
-<CWT_Frequency ua="na">440@-10</CWT_Frequency>
-<Synchronized_Ring ua="na">Yes</Synchronized_Ring>
-
-
-
-<Hook_Flash_Timer_Min ua="na">.1</Hook_Flash_Timer_Min>
-<Hook_Flash_Timer_Max ua="na">1.0</Hook_Flash_Timer_Max>
-<Callee_On_Hook_Delay ua="na">0</Callee_On_Hook_Delay>
-<Reorder_Delay ua="na">0</Reorder_Delay>
-<Call_Back_Expires ua="na">4500</Call_Back_Expires>
-<Call_Back_Retry_Intvl ua="na">90</Call_Back_Retry_Intvl>
-<Call_Back_Delay ua="na">2</Call_Back_Delay>
-<VMWI_Refresh_Intvl ua="na">0</VMWI_Refresh_Intvl>
-<Interdigit_Long_Timer ua="na">8</Interdigit_Long_Timer>
-<Interdigit_Short_Timer ua="na">4</Interdigit_Short_Timer>
-<CPC_Delay ua="na">2</CPC_Delay>
-<CPC_Duration ua="na">0</CPC_Duration>
-
-
-
-<Call_Return_Code ua="na"></Call_Return_Code>
-<Blind_Transfer_Code ua="na">*98</Blind_Transfer_Code>
-<Call_Back_Act_Code ua="na"></Call_Back_Act_Code>
-<Call_Back_Deact_Code ua="na"></Call_Back_Deact_Code>
-<Cfwd_All_Act_Code ua="na"></Cfwd_All_Act_Code>
-<Cfwd_All_Deact_Code ua="na"></Cfwd_All_Deact_Code>
-<Cfwd_Busy_Act_Code ua="na"></Cfwd_Busy_Act_Code>
-<Cfwd_Busy_Deact_Code ua="na"></Cfwd_Busy_Deact_Code>
-<Cfwd_No_Ans_Act_Code ua="na"></Cfwd_No_Ans_Act_Code>
-<Cfwd_No_Ans_Deact_Code ua="na"></Cfwd_No_Ans_Deact_Code>
-<Cfwd_Last_Act_Code ua="na"></Cfwd_Last_Act_Code>
-<Cfwd_Last_Deact_Code ua="na"></Cfwd_Last_Deact_Code>
-<Block_Last_Act_Code ua="na"></Block_Last_Act_Code>
-<Block_Last_Deact_Code ua="na"></Block_Last_Deact_Code>
-<Accept_Last_Act_Code ua="na"></Accept_Last_Act_Code>
-<Accept_Last_Deact_Code ua="na"></Accept_Last_Deact_Code>
-<CW_Act_Code ua="na"></CW_Act_Code>
-<CW_Deact_Code ua="na"></CW_Deact_Code>
-<CW_Per_Call_Act_Code ua="na"></CW_Per_Call_Act_Code>
-<CW_Per_Call_Deact_Code ua="na"></CW_Per_Call_Deact_Code>
-<Block_CID_Act_Code ua="na"></Block_CID_Act_Code>
-<Block_CID_Deact_Code ua="na"></Block_CID_Deact_Code>
-<Block_CID_Per_Call_Act_Code ua="na"></Block_CID_Per_Call_Act_Code>
-<Block_CID_Per_Call_Deact_Code ua="na"></Block_CID_Per_Call_Deact_Code>
-<Block_ANC_Act_Code ua="na"></Block_ANC_Act_Code>
-<Block_ANC_Deact_Code ua="na"></Block_ANC_Deact_Code>
-<DND_Act_Code ua="na"></DND_Act_Code>
-<DND_Deact_Code ua="na"></DND_Deact_Code>
-<CID_Act_Code ua="na"></CID_Act_Code>
-<CID_Deact_Code ua="na"></CID_Deact_Code>
-<CWCID_Act_Code ua="na"></CWCID_Act_Code>
-<CWCID_Deact_Code ua="na"></CWCID_Deact_Code>
-<Dist_Ring_Act_Code ua="na"></Dist_Ring_Act_Code>
-<Dist_Ring_Deact_Code ua="na"></Dist_Ring_Deact_Code>
-<Speed_Dial_Act_Code ua="na"></Speed_Dial_Act_Code>
-<Secure_All_Call_Act_Code ua="na"></Secure_All_Call_Act_Code>
-<Secure_No_Call_Act_Code ua="na"></Secure_No_Call_Act_Code>
-<Secure_One_Call_Act_Code ua="na"></Secure_One_Call_Act_Code>
-<Secure_One_Call_Deact_Code ua="na"></Secure_One_Call_Deact_Code>
-<Conference_Act_Code ua="na"></Conference_Act_Code>
-<Attn-Xfer_Act_Code ua="na"></Attn-Xfer_Act_Code>
-<Referral_Services_Codes ua="na"></Referral_Services_Codes>
-<Feature_Dial_Services_Codes ua="na"></Feature_Dial_Services_Codes>
-
-
-
-
-<Prefer_G711u_Code ua="na"></Prefer_G711u_Code>
-<Force_G711u_Code ua="na"></Force_G711u_Code>
-<Prefer_G711a_Code ua="na"></Prefer_G711a_Code>
-<Force_G711a_Code ua="na"></Force_G711a_Code>
-<Prefer_G723_Code ua="na"></Prefer_G723_Code>
-<Force_G723_Code ua="na"></Force_G723_Code>
-<Prefer_G726r16_Code ua="na"></Prefer_G726r16_Code>
-<Force_G726r16_Code ua="na"></Force_G726r16_Code>
-<Prefer_G726r24_Code ua="na"></Prefer_G726r24_Code>
-<Force_G726r24_Code ua="na"></Force_G726r24_Code>
-<Prefer_G726r32_Code ua="na"></Prefer_G726r32_Code>
-<Force_G726r32_Code ua="na"></Force_G726r32_Code>
-<Prefer_G726r40_Code ua="na"></Prefer_G726r40_Code>
-<Force_G726r40_Code ua="na"></Force_G726r40_Code>
-<Prefer_G729a_Code ua="na"></Prefer_G729a_Code>
-<Force_G729a_Code ua="na"></Force_G729a_Code>
-
-<Modem_Line_Toggle_Code ua="na">*99</Modem_Line_Toggle_Code>
-
-
-<Set_Local_Date__mm_dd_ ua="na"/>
-<Set_Local_Time__HH_mm_ ua="na"/>
-
-<Time_Zone ua="na">
-
-
-GMT-05:00
-</Time_Zone>
-
-<Daylight_Saving_Time_Rule ua="na">
-start=3/8/7/2:0:0;end=11/1/7/2:0:0;save=1
-</Daylight_Saving_Time_Rule>
-
-<FXS_Port_Impedance ua="na">
-600</FXS_Port_Impedance>
-
-<FXS_Port_Input_Gain ua="na">-6</FXS_Port_Input_Gain>
-<FXS_Port_Output_Gain ua="na">-3</FXS_Port_Output_Gain>
-<DTMF_Playback_Level ua="na">-16</DTMF_Playback_Level>
-<DTMF_Playback_Length ua="na">.1</DTMF_Playback_Length>
-<Detect_ABCD ua="na">Yes</Detect_ABCD>
-<Playback_ABCD ua="na">Yes</Playback_ABCD>
-<Caller_ID_Method ua="na">Bellcore(N.Amer,China)</Caller_ID_Method>
-<FXS_Port_Power_Limit ua="na">5</FXS_Port_Power_Limit>
-
-<More_Echo_Suppression ua="na">Yes</More_Echo_Suppression>
-
-<Protect_IVR_FactoryReset ua="na">Yes</Protect_IVR_FactoryReset>
-
</flat-profile>
-
-<%
--- DEBUGGING
---require("session")
---io.write(session.serialize("values", values))
-%>