testing/fprobe-ulog: move to main

4 files changed, 0 insertions, 206 deletions

diff --git a/testing/fprobe-ulog/APKBUILD b/testing/fprobe-ulog/APKBUILD
deleted file mode 100644
index 76c665c878..0000000000
--- a/testing/fprobe-ulog/APKBUILD
+++ /dev/null
@@ -1,51 +0,0 @@
-# Maintainer: Leonardo Arena <rnalrd@alpinelinux.org>
-pkgname=fprobe-ulog
-pkgver=1.1
-pkgrel=1
-pkgdesc="netfilter-based tool that collect network traffic"
-url="http://fprobe.sourceforge.net/"
-arch="all"
-license="GPL"
-depends=
-makedepends=""
-install=""
-subpackages="$pkgname-doc"
-source="http://downloads.sourceforge.net/project/fprobe/$pkgname/$pkgver/$pkgname-1.1.tar.bz2
-	fprobe-ulog.confd
-	fprobe-ulog.initd
-	fprobe-1.1-pidfile-sanity.patch
-	"
-
-_builddir="$srcdir"/$pkgname-$pkgver
-
-prepare() {
-	cd $_builddir
-	for i in ../*.patch
-	do
-		msg "Applying $i"
-		patch -p1 < ../$i || exit 1
-	done
-}
-
-build() {
-	cd "$_builddir"
-	./configure --prefix=/usr \
-		--sysconfdir=/etc \
-		--mandir=/usr/share/man \
-		--infodir=/usr/share/info
-	make || return 1
-}
-
-package() {
-	cd "$_builddir"
-	make DESTDIR="$pkgdir" install
-
-	install -m755 -D "$srcdir"/$pkgname.initd "$pkgdir"/etc/init.d/$pkgname
-	install -m644 -D "$srcdir"/$pkgname.confd "$pkgdir"/etc/conf.d/$pkgname
-
-}
-
-md5sums="cdb2e4edc47e8a3d5479eeabfb979ebc  fprobe-ulog-1.1.tar.bz2
-a92104da52c99532d1d01007b78940fc  fprobe-ulog.confd
-744975c055421223940a278517b34d47  fprobe-ulog.initd
-f1316ad835c1a2b6565b4dc448b022df  fprobe-1.1-pidfile-sanity.patch"
diff --git a/testing/fprobe-ulog/fprobe-1.1-pidfile-sanity.patch b/testing/fprobe-ulog/fprobe-1.1-pidfile-sanity.patch
deleted file mode 100644
index 5f7b79bd8c..0000000000
--- a/testing/fprobe-ulog/fprobe-1.1-pidfile-sanity.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-If we are using the chroot() option or the setuid options, we must create the
-pidfile before doing the chroot OR the setreuid. It's actually best for
-start-stop-daemon if we create the pidfile from the master side of the fork()
-before it exits, since most of the startup checks happen after the chroot()
-unfortunetly.
-
-Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
-
-diff -Nuar fprobe-1.1.orig/src/fprobe.c fprobe-1.1/src/fprobe.c
---- fprobe-1.1.orig/src/fprobe-ulog.c	2005-01-30 08:43:35.000000000 +0000
-+++ fprobe-1.1/src/fprobe-ulog.c	2008-03-16 20:51:24.000000000 +0000
-@@ -1379,7 +1379,8 @@
- 
- 	my_log_open(ident, verbosity, log_dest);
- 	if (!(log_dest & 2)) {
--		switch (fork()) {
-+		pid_t childpid = fork();
-+		switch (childpid) {
- 			case -1:
- 				fprintf(stderr, "fork(): %s", strerror(errno));
- 				exit(1);
-@@ -1392,6 +1393,12 @@
- 				break;
- 
- 			default:
-+				if (!(pidfile = fopen(pidfilepath, "w")))
-+					my_log(LOG_ERR, "Can't create pid file. fopen(): %s", strerror(errno));
-+				else {
-+					fprintf(pidfile, "%ld\n", (long) childpid);
-+					fclose(pidfile);
-+				}
- 				exit(0);
- 		}
- 	} else {
-@@ -1548,13 +1555,6 @@
- 		}
- 	}
- 
--	if (!(pidfile = fopen(pidfilepath, "w")))
--		my_log(LOG_ERR, "Can't create pid file. fopen(): %s", strerror(errno));
--	else {
--		fprintf(pidfile, "%ld\n", (long) pid);
--		fclose(pidfile);
--	}
--
- 	my_log(LOG_INFO, "pid: %d", pid);
- 	my_log(LOG_INFO, "interface: %s, datalink: %s (%d)",
- 		dev, dlt[link_type_idx].descr, link_type);
diff --git a/testing/fprobe-ulog/fprobe-ulog.confd b/testing/fprobe-ulog/fprobe-ulog.confd
deleted file mode 100644
index 758d97f463..0000000000
--- a/testing/fprobe-ulog/fprobe-ulog.confd
+++ /dev/null
@@ -1,68 +0,0 @@
-# Config file for /etc/init.d/fprobe
-DAEMON=/usr/sbin/fprobe-ulog
-
-# Do we want the interface in promiscous mode [yes/no]
-#PROMISC=no
-
-# If configured, only capture packets matching this tcpdump expression
-#FILTER=""
-
-# Flow state timers
-#TIMER_EXPIRED=5
-#TIMER_FRAGMENTED=30
-#TIMER_IDLE=60
-#TIMER_ACTIVE=300
-
-# This is the default and should be left unless you know what you are doing
-#FLOW_VER=5
-
-# local ip. if configured fprobe will use this as the source IP for sending ALL flow data
-# If you want to specify a specific source address per collecter, customize it below
-#LOCALIP=
-
-# SNMP iface id
-SNMP_IFACE="${IFACE//eth}"
-
-# Maximum number of concurrent flows to track
-# using a specified amount of memory
-#MEMBULK=10000
-#MEMLIMIT=
-
-# Pending queue
-#PENDING=100
-
-# Kernel capture buffer size (kB)
-#KERNBUF=1024
-
-# Realtime priority [0=disabled, 1..99]
-#RTPRIO=0
-
-# Delay N nanoseconds after each B bytes
-#DELAY="0:0"
-
-# How much of the start of each packet to grab
-#SNAPLEN=256
-
-# chroot() to this location after startup
-CHROOT="/var/empty"
-
-# User to run as. must have perms to the pidfile directory /var/run/fprobe/
-USER=nobody
-
-# logging level for syslog (0=EMERG, ..., 6=INFO, 7=DEBUG)
-#LOGLEVEL=6
-
-# If you want to run multiple instances of fprobe,
-# You MUST set this variable to a unique INTEGER for each one!
-PIDFILE_ID=''
-
-# remote ip. this is where we send flows
-REMOTEIP=127.0.0.1
-# port to listen on
-PORT=2055
-# Collector type, see the manpage for valid types
-TYPE=''
-
-# If you want multiple collectors, just specify each one here
-COLLECTORS="${REMOTEIP}:${PORT}/${LOCALIP}/${TYPE}"
-
diff --git a/testing/fprobe-ulog/fprobe-ulog.initd b/testing/fprobe-ulog/fprobe-ulog.initd
deleted file mode 100755
index d8f5c9acff..0000000000
--- a/testing/fprobe-ulog/fprobe-ulog.initd
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/sbin/runscript
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-depend() {
-	need net
-	after firewall
-}
-
-PIDFILE_EXTRA=""
-[ -n "$PIDFILE_ID" ] && PIDFILE_EXTRA="[$PIDFILE_ID]"
-PIDFILE="/var/run/fprobe-ulog$PIDFILE_EXTRA.pid"
-
-start() {
-	ebegin "Starting fprobe-ulog"
-	local OPTS=""
-	set --
-	[ -n "${FILTER}" ] && set -- -f "${FILTER}"
-	for optname in s:TIMER_EXPIRED g:TIME_FRAGMENTED d:TIMER_IDLE \
-		e:TIMER_ACTIVE n:FLOW_VER a:LOCALIP X:SNMP_IFACE b:MEMBULK \
-		m:MEMLIMIT q:PENDING B:KERNBUF r:RTPRIO t:DELAY \
-		c:CHROOT u:USER v:LOGLEVEL ; do
-	    opt="${optname/:*}"	optvar="${optname/*:}"
-	    eval optvalue="\$$optvar"
-	    [ -n "$optvalue" ] && OPTS="${OPTS} -${opt} ${optvalue}"
-	done
-	OPTS="${OPTS} -l 1:${PIDFILE_ID} ${COLLECTORS}"
-	start-stop-daemon --start --exec $DAEMON \
-		--pidfile ${PIDFILE} \
-		-- "$@" ${OPTS}
-	eend $?
-}
-
-stop() {
-	ebegin "Stopping fprobe-ulog"
-	start-stop-daemon --stop --quiet --exec $DAEMON \
-		--pidfile ${PIDFILE}
-	eend $?
-}