main/apache2: moved from testing

fixes #392

8 files changed, 1697 insertions, 0 deletions

diff --git a/main/apache2/APKBUILD b/main/apache2/APKBUILD
new file mode 100644
index 000000000..a18fe7f20
--- /dev/null
+++ b/main/apache2/APKBUILD
@@ -0,0 +1,193 @@
+# Maintainer: Natanael Copa <ncopa@alpinelinux.org>
+pkgname=apache2
+pkgver=2.2.16
+pkgrel=2
+pkgdesc="A high performance Unix-based HTTP server"
+url="http://httpd.apache.org/"
+license="APACHE"
+depends=""
+pkgusers="apache"
+pkggroups="apache"
+makedepends="openssl-dev zlib-dev apr-util-dev apr-dev pcre-dev
+	autoconf automake"
+subpackages="$pkgname-dev $pkgname-doc $pkgname-utils $pkgname-ssl
+	$pkgname-ldap"
+source="http://archive.apache.org/dist/httpd/httpd-$pkgver.tar.bz2
+	http://mpm-itk.sesse.net/apache2.2-mpm-itk-2.2.11-02/02-rename-prefork-to-itk.patch
+	http://mpm-itk.sesse.net/apache2.2-mpm-itk-2.2.11-02/03-add-mpm-to-build-system.patch
+	http://mpm-itk.sesse.net/apache2.2-mpm-itk-2.2.11-02/04-correct-output-makefile-location.patch
+	http://mpm-itk.sesse.net/apache2.2-mpm-itk-2.2.11-02/05-add-copyright.patch
+	http://mpm-itk.sesse.net/apache2.2-mpm-itk-2.2.11-02/06-hook-just-after-merging-perdir-config.patch
+	http://mpm-itk.sesse.net/apache2.2-mpm-itk-2.2.11-02/07-base-functionality.patch
+	http://mpm-itk.sesse.net/apache2.2-mpm-itk-2.2.11-02/08-max-clients-per-vhost.patch
+	http://mpm-itk.sesse.net/apache2.2-mpm-itk-2.2.11-02/09-capabilities.patch
+	http://mpm-itk.sesse.net/apache2.2-mpm-itk-2.2.11-02/10-nice.patch
+	apache2.confd
+	apache2.logrotate
+	apache2.initd
+	httpd.conf
+	ssl.conf
+	alpine.layout"
+
+prepare() {
+	cd "$srcdir"
+	cat "$srcdir/alpine.layout" >> httpd-$pkgver/config.layout
+
+	# create symlinks to soruces for prefork and worker
+	ln -s httpd-$pkgver prefork
+	ln -s httpd-$pkgver worker
+
+	# make a patched clone of itk sources
+	cp -ra httpd-$pkgver itk
+	cd itk 
+	mkdir -p server/mpm/experimental/itk
+	cp -r server/mpm/prefork/* \
+		server/mpm/experimental/itk/ || return 1
+	mv server/mpm/experimental/itk/prefork.c \
+		server/mpm/experimental/itk/itk.c || return 1
+	patch -Np1 -i "$srcdir/02-rename-prefork-to-itk.patch" || return 1
+	patch -Np1 -i "$srcdir/03-add-mpm-to-build-system.patch" || return 1
+	patch -Np1 -i "$srcdir/04-correct-output-makefile-location.patch" || return 1
+	patch -Np1 -i "$srcdir/05-add-copyright.patch" || return 1
+	patch -Np1 -i "$srcdir/06-hook-just-after-merging-perdir-config.patch" || return 1
+	patch -Np1 -i "$srcdir/07-base-functionality.patch" || return 1
+	patch -Np1 -i "$srcdir/08-max-clients-per-vhost.patch" || return 1
+	patch -Np1 -i "$srcdir/09-capabilities.patch" || return 1
+	patch -Np1 -i "$srcdir/10-nice.patch" || return 1
+	autoconf || return 1
+}
+
+_buildmpm() {
+	local mpm=$1
+	shift
+	mkdir "$srcdir"/build-${mpm}
+	cd "$srcdir"/build-${mpm}
+	"$srcdir"/$mpm/configure --prefix=/usr \
+		--enable-layout=Alpine \
+		--enable-so \
+		--enable-suexec \
+		--with-suexec-caller=http \
+		--with-suexec-docroot=/var/www/localhost/htdocs \
+		--with-suexec-logfile=/var/log/httpd/suexec.log \
+		--with-suexec-bin=/usr/sbin/suexec \
+		--with-suexec-uidmin=99 \
+		--with-suexec-gidmin=99 \
+		--with-apr=/usr/bin/apr-1-config \
+		--with-apr-util=/usr/bin/apu-1-config \
+		--with-pcre=/usr \
+		--with-mpm=${mpm} \
+		$@ \
+		|| return 1
+	make || return 1
+}
+
+build () { 
+	local mpm
+
+	# build prefork with everything
+	_buildmpm prefork \
+		--enable-mods-shared=all \
+		--enable-ssl --with-ssl \
+		--enable-proxy \
+	        --enable-cache \
+	        --enable-disk-cache \
+		--enable-mem-cache \
+		--enable-file-cache \
+	        --enable-ldap --enable-authnz-ldap \
+	        --enable-cgid \
+	        --enable-authn-anon --enable-authn-alias \
+	        --disable-imagemap \
+		--enable-proxy-connect \
+		--enable-proxy-http \
+		--enable-proxy-ftp \
+		--enable-deflate \
+		--enable-dbd \
+		|| return 1
+
+	#build the alternative mpms, but without modules
+	for mpm in worker itk; do
+		_buildmpm $mpm --enable-modules=none
+	done
+}
+
+package() {
+	cd "$srcdir"/build-prefork
+	make -j1 DESTDIR="$pkgdir" install || return 1
+	for mpm in worker itk; do
+		install -m755 "$srcdir"/build-$mpm/httpd \
+			"$pkgdir/usr/sbin/httpd.${mpm}" || return 1
+	done
+	
+	# config
+	rm -r "$pkgdir"/etc/apache2/httpd.conf \
+		"$pkgdir"/etc/apache2/extra 
+	install -D -m644 "$srcdir"/httpd.conf "$pkgdir"/etc/apache2/httpd.conf
+	install -d "$pkgdir"/etc/apache2/conf.d
+
+	# init scripts and logrotate
+	install -D -m755 "$srcdir/apache2.initd" \
+		"$pkgdir/etc/init.d/apache2" || return 1
+	install -D -m644 "$srcdir/apache2.logrotate" \
+		"$pkgdir/etc/logrotate.d/apache2" || return 1
+	install -D -m644 "$srcdir/apache2.confd" \
+		"$pkgdir/etc/conf.d/apache2" || return 1
+
+	install -d "$pkgdir"/var/www
+	ln -fs /var/log/apache2 "$pkgdir/var/www/logs"
+	ln -fs /var/run/apache2 "$pkgdir/var/www/run"
+	ln -fs /usr/lib/apache2 "$pkgdir/var/www/modules"
+	ln -fs /etc/apache2/conf.d "$pkgdir/var/www/conf.d"
+}
+
+# include the builddir and apxs in -dev package
+dev() {
+	default_dev
+	install -d "$subpkgdir"/usr/share/apache2/ \
+		"$subpkgdir"/usr/sbin
+	mv "$pkgdir"/usr/sbin/apxs "$subpkgdir"/usr/sbin/ || return 1
+	mv "$pkgdir"/usr/share/apache2/build "$subpkgdir"/usr/share/apache2/
+}
+
+utils() {
+	pkgdesc="Apache utility programs for webservers"
+	install -d "$subpkgdir"/usr/bin "$subpkgdir"/usr/sbin
+	cd "$pkgdir"/usr/sbin
+	mv ab dbmmanage htdbm htdigest htpasswd logresolve "$subpkgdir"/usr/bin
+	mv checkgid htcacheclean rotatelogs "$subpkgdir"/usr/sbin
+}
+
+ssl() {
+	pkgdesc="SSL/TLS module for the Apache HTTP Server"
+	install="apache2-ssl.post-install"
+	depends="apache2 openssl"
+	install -d "$subpkgdir"/usr/lib/apache2 \
+		"$subpkgdir"/etc/ssl/apache2
+	mv "$pkgdir"/usr/lib/apache2/mod_ssl.so "$subpkgdir"/usr/lib/apache2/ \
+		|| return 1
+	install -m644 -D "$srcdir"/ssl.conf "$subpkgdir"/etc/apache2/conf.d/ssl.conf
+}
+
+ldap() {
+	pkgdesc="LDAP authentication/authorization module for the Apache HTTP Server"
+	url="http://httpd.apache.org/docs/2.2/mod/mod_authnz_ldap.html"
+	depends="apache2"
+	install -d "$subpkgdir"/usr/lib/apache2 
+	mv "$pkgdir"/usr/lib/apache2/mod_*ldap*.so "$subpkgdir"/usr/lib/apache2
+}
+
+md5sums="c8ff2a07c884300bc7766a2e7f662d33  httpd-2.2.16.tar.bz2
+db42cfcc18ae1c32aaaff2347e35b79d  02-rename-prefork-to-itk.patch
+131408ad4dc7b18547b4e062e7e495ab  03-add-mpm-to-build-system.patch
+ee488f391054d528547c3a372faa2aa7  04-correct-output-makefile-location.patch
+b202944761b2f0516196488b12504236  05-add-copyright.patch
+78fa15f8ca3a284b7d71f942e24e47fb  06-hook-just-after-merging-perdir-config.patch
+d33e39350e987721d50e6fb8e164ab6b  07-base-functionality.patch
+9f7a8935f9cabc7b46d0052906634cef  08-max-clients-per-vhost.patch
+1b28e3363e1b0d05b738a21e7ddd264f  09-capabilities.patch
+d9667fcd2ffecc63e446edd4d6666731  10-nice.patch
+e322b5211e49511cac6e40c86af1b1da  apache2.confd
+75fe4138b98fcffd01b8c8c077b944f3  apache2.logrotate
+0261136ff734c3ae8dcf878a46ed5830  apache2.initd
+769748b26d008f427678ac2bbc7ab171  httpd.conf
+5d0d024ca43571b863874ab871b2c109  ssl.conf
+c66ff5f70260d5266e6803a59b39bd7f  alpine.layout"
diff --git a/main/apache2/alpine.layout b/main/apache2/alpine.layout
new file mode 100644
index 000000000..99f20df52
--- /dev/null
+++ b/main/apache2/alpine.layout
@@ -0,0 +1,22 @@
+<Layout Alpine>
+	prefix:          /usr
+	exec_prefix:     ${prefix}
+	bindir:          ${prefix}/bin
+	sbindir:         ${prefix}/sbin
+	libdir:          ${prefix}/lib
+	libexecdir:      ${prefix}/lib+
+	mandir:          ${prefix}/share/man
+	sysconfdir:      /etc+
+	datadir:         ${prefix}/share+
+	installbuilddir: ${datadir}/build
+	errordir:        ${datadir}/error
+	iconsdir:        ${datadir}/icons
+	htdocsdir:       /var/www/localhost/htdocs
+	manualdir:       /usr/share/doc/apache2/manual
+	cgidir:          /var/www/cgi-bin
+	includedir:      /usr/include+
+	localstatedir:   /var
+	runtimedir:      ${localstatedir}/run+
+	logfiledir:      ${localstatedir}/log+
+	proxycachedir:   ${localstatedir}/cache+
+</Layout>
diff --git a/main/apache2/apache2-ssl.post-install b/main/apache2/apache2-ssl.post-install
new file mode 100644
index 000000000..d73b5fc62
--- /dev/null
+++ b/main/apache2/apache2-ssl.post-install
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+ssldir=/etc/ssl/apache2
+sslkey=$ssldir/server.key
+sslcert=$ssldir/server.pem
+
+umask 077
+
+if [ ! -f ${sslkey} ] ; then
+	openssl genrsa -rand /proc/apm:/proc/cpuinfo:/proc/dma:/proc/filesystems:/proc/interrupts:/proc/ioports:/proc/pci:/proc/rtc:/proc/uptime 1024 > ${sslkey} 2> /dev/null
+fi
+
+FQDN=`hostname -f`
+if [ "x${FQDN}" = "x" ]; then
+	FQDN=localhost.localdomain
+fi
+
+if [ ! -f ${sslcert} ] ; then
+cat << EOF | openssl req -new -key ${sslkey} \
+         -x509 -days 365 -set_serial $RANDOM \
+         -out ${sslcert} 2>/dev/null
+--
+SomeState
+SomeCity
+SomeOrganization
+SomeOrganizationalUnit
+${FQDN}
+root@${FQDN}
+EOF
+fi
+
+
diff --git a/main/apache2/apache2.confd b/main/apache2/apache2.confd
new file mode 100644
index 000000000..faf02fa97
--- /dev/null
+++ b/main/apache2/apache2.confd
@@ -0,0 +1,54 @@
+# /etc/conf.d/apache2: config file for /etc/init.d/apache2
+
+#
+# The default processing model (MPM) is the process-based
+# 'prefork' model. A thread-based model, 'worker', is also
+# available, but does not work with some modules (such as PHP).
+#
+#HTTPD=/usr/sbin/httpd.worker
+
+HTTPD="/usr/sbin/httpd"
+
+#
+# To pass additional options (for instance, -D definitions) to the
+# httpd binary at startup, set HTTPD_OPTS here.
+#
+HTTPD_OPTS=
+
+# Extended options for advanced uses of Apache ONLY
+# You don't need to edit these unless you are doing crazy Apache stuff
+# As not having them set correctly, or feeding in an incorrect configuration
+# via them will result in Apache failing to start
+# YOU HAVE BEEN WARNED.
+
+# PID file
+#PIDFILE=/var/run/apache2/httpd.pid
+
+# timeout for startup/shutdown checks
+#TIMEOUT=10
+
+# ServerRoot setting
+#SERVERROOT=/var/www
+
+# Configuration file location
+# - If this does NOT start with a '/', then it is treated relative to
+# $SERVERROOT by Apache
+#CONFIGFILE=/etc/apache2/httpd.conf
+
+# Location to log startup errors to
+# They are normally dumped to your terminal.
+#STARTUPERRORLOG="/var/log/apache2/startuperror.log"
+
+# A command that outputs a formatted text version of the HTML at the URL
+# of the command line. Designed for lynx, however other programs may work.
+#LYNX="lynx -dump"
+
+# The URL to your server's mod_status status page.
+# Required for status and fullstatus
+#STATUSURL="http://localhost/server-status"
+
+# Method to use when reloading the server
+# Valid options are 'restart' and 'graceful'
+# See http://httpd.apache.org/docs/2.2/stopping.html for information on
+# what they do and how they differ.
+#RELOAD_TYPE="graceful"
diff --git a/main/apache2/apache2.initd b/main/apache2/apache2.initd
new file mode 100755
index 000000000..03a6d0303
--- /dev/null
+++ b/main/apache2/apache2.initd
@@ -0,0 +1,154 @@
+#!/sbin/runscript
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+opts="configdump configtest fullstatus graceful gracefulstop modules reload virtualhosts"
+
+depend() {
+	need net
+	use mysql dns logger netmount postgresql
+	after sshd
+}
+
+configtest() {
+	ebegin "Checking ${SVCNAME} configuration"
+	checkconfig
+	eend $?
+}
+
+checkconfd() {
+	PIDFILE="${PIDFILE:-/var/run/apache2/httpd.pid}"
+	TIMEOUT=${TIMEOUT:-10}
+
+	SERVERROOT="${SERVERROOT:-/var/www}"
+	if [ ! -d ${SERVERROOT} ]; then
+		eerror "SERVERROOT does not exist: ${SERVERROOT}"
+		return 1
+	fi
+
+	CONFIGFILE="${CONFIGFILE:-/etc/apache2/httpd.conf}"
+	[ "${CONFIGFILE#/}" = "${CONFIGFILE}" ] && CONFIGFILE="${SERVERROOT}/${CONFIGFILE}"
+	if [ ! -r "${CONFIGFILE}" ]; then
+		eerror "Unable to read configuration file: ${CONFIGFILE}"
+		return 1
+	fi
+
+	HTTPD_OPTS="${HTTPD_OPTS} -d ${SERVERROOT}"
+	HTTPD_OPTS="${HTTPD_OPTS} -f ${CONFIGFILE}"
+	[ -n "${STARTUPERRORLOG}" ] && HTTPD_OPTS="${HTTPD_OPTS} -E ${STARTUPERRORLOG}"
+	return 0
+
+}
+
+checkconfig() {
+	checkconfd || return 1
+
+	${HTTPD} ${HTTPD_OPTS} -t 1>/dev/null 2>&1
+	ret=$?
+	if [ $ret -ne 0 ]; then
+		eerror "${SVCNAME} has detected an error in your setup:"
+		${HTTPD} ${HTTPD_OPTS} -t
+	fi
+
+	return $ret
+}
+
+start() {
+	checkconfig || return 1
+
+	[ -f /var/log/apache2/ssl_scache ] && rm /var/log/apache2/ssl_scache
+
+	ebegin "Starting ${SVCNAME}"
+	start-stop-daemon --start \
+		--pidfile ${PIDFILE} \
+		--exec ${HTTPD} \
+		-- ${HTTPD_OPTS} -k start
+	eend $?
+}
+
+stop() {
+	checkconfd || return 1
+
+	ebegin "Stopping ${SVCNAME}"
+	start-stop-daemon --stop --pidfile ${PIDFILE} --exec ${HTTPD} \
+		--retry ${TIMEOUT}
+	eend $?
+}
+
+reload() {
+	RELOAD_TYPE="${RELOAD_TYPE:-graceful}"
+
+	checkconfig || return 1
+	service_started "${SVCNAME}" || return
+
+	if [ "${RELOAD_TYPE}" = "restart" ]; then
+		ebegin "Restarting ${SVCNAME}"
+		${HTTPD} ${HTTPD_OPTS} -k restart
+		eend $?
+	elif [ "${RELOAD_TYPE}" = "graceful" ]; then
+		ebegin "Gracefully restarting ${SVCNAME}"
+		${HTTPD} ${HTTPD_OPTS} -k graceful
+		eend $?
+	else
+		eerror "${RELOAD_TYPE} is not a valid RELOAD_TYPE. Please edit /etc/conf.d/${SVCNAME}"
+	fi
+}
+
+graceful() {
+	checkconfig || return 1
+	service_started "${SVCNAME}" || return
+	ebegin "Gracefully restarting ${SVCNAME}"
+	${HTTPD} ${HTTPD_OPTS} -k graceful
+	eend $?
+}
+
+gracefulstop() {
+	checkconfig || return 1
+	ebegin "Gracefully stopping ${SVCNAME}"
+	start-stop-daemon --stop --pidfile ${PIDFILE} --exec ${HTTPD} \
+		--retry SIGWINCH/${TIMEOUT}
+	eend $?
+}
+
+modules() {
+	checkconfig || return 1
+
+	${HTTPD} ${HTTPD_OPTS} -M 2>&1
+}
+
+fullstatus() {
+	LYNX="${LYNX:-lynx -dump}"
+	STATUSURL="${STATUSURL:-http://localhost/server-status}"
+
+	if ! service_started "${SVCNAME}"; then
+		eerror "${SVCNAME} not started"
+	elif ! type -p $(set -- ${LYNX}; echo $1) 2>&1 >/dev/null; then
+		eerror "lynx not found! you need to emerge www-client/lynx"
+	else
+		${LYNX} ${STATUSURL}
+	fi
+}
+
+virtualhosts() {
+	checkconfd || return 1
+	${HTTPD} ${HTTPD_OPTS} -S
+}
+
+configdump() {
+	LYNX="${LYNX:-lynx -dump}"
+	INFOURL="${INFOURL:-http://localhost/server-info}"
+
+	checkconfd || return 1
+
+	if ! service_started "${SVCNAME}"; then
+		eerror "${SVCNAME} not started"
+	elif ! type -p $(set -- ${LYNX}; echo $1) 2>&1 >/dev/null; then
+		eerror "lynx not found! you need to emerge www-client/lynx"
+	else
+		echo "${HTTPD} started with '${HTTPD_OPTS}'"
+		for i in config server list; do
+			${LYNX} "${INFOURL}/?${i}" | sed '/Apache Server Information/d;/^[[:space:]]\+[_]\+$/Q'
+		done
+	fi
+}
+
diff --git a/main/apache2/apache2.logrotate b/main/apache2/apache2.logrotate
new file mode 100644
index 000000000..fe19a4381
--- /dev/null
+++ b/main/apache2/apache2.logrotate
@@ -0,0 +1,10 @@
+/var/log/apache2/*log {
+    missingok
+    notifempty
+    sharedscripts
+    delaycompress
+    postrotate
+        /sbin/rc-service --quiet apache2 reload > /dev/null 2>/dev/null || true
+    endscript
+}
+
diff --git a/main/apache2/httpd.conf b/main/apache2/httpd.conf
new file mode 100644
index 000000000..fab84b80b
--- /dev/null
+++ b/main/apache2/httpd.conf
@@ -0,0 +1,1009 @@
+#
+# This is the main Apache server configuration file.  It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
+# In particular, see
+# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
+# for a discussion of each configuration directive.
+#
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+# The configuration directives are grouped into three basic sections:
+#  1. Directives that control the operation of the Apache server process as a
+#     whole (the 'global environment').
+#  2. Directives that define the parameters of the 'main' or 'default' server,
+#     which responds to requests that aren't handled by a virtual host.
+#     These directives also provide default values for the settings
+#     of all virtual hosts.
+#  3. Settings for virtual hosts, which allow Web requests to be sent to
+#     different IP addresses or hostnames and have them handled by the
+#     same Apache server process.
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path.  If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
+# with ServerRoot set to "/etc/httpd" will be interpreted by the
+# server as "/etc/httpd/logs/foo.log".
+#
+
+### Section 1: Global Environment
+#
+# The directives in this section affect the overall operation of Apache,
+# such as the number of concurrent requests it can handle or where it
+# can find its configuration files.
+#
+
+#
+# Don't give away too much information about all the subcomponents
+# we are running.  Comment out this line if you don't mind remote sites
+# finding out what major optional modules you are running
+ServerTokens OS
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# NOTE!  If you intend to place this on an NFS (or otherwise network)
+# mounted filesystem then please read the LockFile documentation
+# (available at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
+# you will save yourself a lot of trouble.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+ServerRoot "/var/www"
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.  Note the PIDFILE variable in
+# /etc/conf.d/apache2 must be set appropriately if this location is
+# changed.
+#
+PidFile run/httpd.pid
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 60
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive Off
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 5
+
+##
+## Server-Pool Size Regulation (MPM specific)
+## 
+
+# prefork MPM
+# StartServers: number of server processes to start
+# MinSpareServers: minimum number of server processes which are kept spare
+# MaxSpareServers: maximum number of server processes which are kept spare
+# ServerLimit: maximum value for MaxClients for the lifetime of the server
+# MaxClients: maximum number of server processes allowed to start
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule prefork.c>
+StartServers       8
+MinSpareServers    5
+MaxSpareServers   20
+ServerLimit      256
+MaxClients       256
+MaxRequestsPerChild  4000
+</IfModule>
+
+# worker MPM
+# StartServers: initial number of server processes to start
+# MaxClients: maximum number of simultaneous client connections
+# MinSpareThreads: minimum number of worker threads which are kept spare
+# MaxSpareThreads: maximum number of worker threads which are kept spare
+# ThreadsPerChild: constant number of worker threads in each server process
+# MaxRequestsPerChild: maximum number of requests a server process serves
+<IfModule worker.c>
+StartServers         4
+MaxClients         300
+MinSpareThreads     25
+MaxSpareThreads     75 
+ThreadsPerChild     25
+MaxRequestsPerChild  0
+</IfModule>
+
+#
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, in addition to the default. See also the <VirtualHost>
+# directive.
+#
+# Change this to Listen on specific IP addresses as shown below to 
+# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
+#
+#Listen 12.34.56.78:80
+Listen 80
+
+#
+# Dynamic Shared Object (DSO) Support
+#
+# To be able to use the functionality of a module which was built as a DSO you
+# have to place corresponding `LoadModule' lines at this location so the
+# directives contained in it are actually available _before_ they are used.
+# Statically compiled modules (those listed by `httpd -l') do not need
+# to be loaded here.
+#
+# Example:
+# LoadModule foo_module modules/mod_foo.so
+#
+LoadModule auth_basic_module modules/mod_auth_basic.so
+LoadModule auth_digest_module modules/mod_auth_digest.so
+LoadModule authn_file_module modules/mod_authn_file.so
+LoadModule authn_alias_module modules/mod_authn_alias.so
+LoadModule authn_anon_module modules/mod_authn_anon.so
+LoadModule authn_dbm_module modules/mod_authn_dbm.so
+LoadModule authn_default_module modules/mod_authn_default.so
+LoadModule authz_host_module modules/mod_authz_host.so
+LoadModule authz_user_module modules/mod_authz_user.so
+LoadModule authz_owner_module modules/mod_authz_owner.so
+LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
+LoadModule authz_dbm_module modules/mod_authz_dbm.so
+LoadModule authz_default_module modules/mod_authz_default.so
+LoadModule ldap_module modules/mod_ldap.so
+LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
+LoadModule include_module modules/mod_include.so
+LoadModule log_config_module modules/mod_log_config.so
+LoadModule logio_module modules/mod_logio.so
+LoadModule env_module modules/mod_env.so
+LoadModule ext_filter_module modules/mod_ext_filter.so
+LoadModule mime_magic_module modules/mod_mime_magic.so
+LoadModule expires_module modules/mod_expires.so
+LoadModule deflate_module modules/mod_deflate.so
+LoadModule headers_module modules/mod_headers.so
+LoadModule usertrack_module modules/mod_usertrack.so
+LoadModule setenvif_module modules/mod_setenvif.so
+LoadModule mime_module modules/mod_mime.so
+LoadModule dav_module modules/mod_dav.so
+LoadModule status_module modules/mod_status.so
+LoadModule autoindex_module modules/mod_autoindex.so
+LoadModule info_module modules/mod_info.so
+LoadModule dav_fs_module modules/mod_dav_fs.so
+LoadModule vhost_alias_module modules/mod_vhost_alias.so
+LoadModule negotiation_module modules/mod_negotiation.so
+LoadModule dir_module modules/mod_dir.so
+LoadModule actions_module modules/mod_actions.so
+LoadModule speling_module modules/mod_speling.so
+LoadModule userdir_module modules/mod_userdir.so
+LoadModule alias_module modules/mod_alias.so
+LoadModule substitute_module modules/mod_substitute.so
+LoadModule rewrite_module modules/mod_rewrite.so
+LoadModule proxy_module modules/mod_proxy.so
+LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
+LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
+LoadModule proxy_http_module modules/mod_proxy_http.so
+LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
+LoadModule proxy_connect_module modules/mod_proxy_connect.so
+LoadModule cache_module modules/mod_cache.so
+LoadModule suexec_module modules/mod_suexec.so
+LoadModule disk_cache_module modules/mod_disk_cache.so
+LoadModule cgi_module modules/mod_cgi.so
+LoadModule version_module modules/mod_version.so
+
+#
+# The following modules are not loaded by default:
+#
+#LoadModule asis_module modules/mod_asis.so
+#LoadModule authn_dbd_module modules/mod_authn_dbd.so
+#LoadModule cern_meta_module modules/mod_cern_meta.so
+#LoadModule cgid_module modules/mod_cgid.so
+#LoadModule dbd_module modules/mod_dbd.so
+#LoadModule dumpio_module modules/mod_dumpio.so
+#LoadModule filter_module modules/mod_filter.so
+#LoadModule ident_module modules/mod_ident.so
+#LoadModule log_forensic_module modules/mod_log_forensic.so
+#LoadModule unique_id_module modules/mod_unique_id.so
+#
+
+#
+# Load config files from the config directory "/etc/apache2/conf.d".
+#
+Include /etc/apache2/conf.d/*.conf
+
+#
+# ExtendedStatus controls whether Apache will generate "full" status
+# information (ExtendedStatus On) or just basic information (ExtendedStatus
+# Off) when the "server-status" handler is called. The default is Off.
+#
+#ExtendedStatus On
+
+#
+# If you wish httpd to run as a different user or group, you must run
+# httpd as root initially and it will switch.  
+#
+# User/Group: The name (or #number) of the user/group to run httpd as.
+#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
+#  . On HPUX you may not be able to use shared memory as nobody, and the
+#    suggested workaround is to create a user www and use that user.
+#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
+#  when the value of (unsigned)Group is above 60000; 
+#  don't use Group #-1 on these systems!
+#
+User apache
+Group apache
+
+### Section 2: 'Main' server configuration
+#
+# The directives in this section set up the values used by the 'main'
+# server, which responds to any requests that aren't handled by a
+# <VirtualHost> definition.  These values also provide defaults for
+# any <VirtualHost> containers you may define later in the file.
+#
+# All of these directives may appear inside <VirtualHost> containers,
+# in which case these default settings will be overridden for the
+# virtual host being defined.
+#
+
+#
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed.  This address appears on some server-generated pages, such
+# as error documents.  e.g. admin@your-domain.com
+#
+ServerAdmin root@localhost
+
+#
+# ServerName gives the name and port that the server uses to identify itself.
+# This can often be determined automatically, but we recommend you specify
+# it explicitly to prevent problems during startup.
+#
+# If this is not set to valid DNS name for your host, server-generated
+# redirections will not work.  See also the UseCanonicalName directive.
+#
+# If your host doesn't have a registered DNS name, enter its IP address here.
+# You will have to access it by its address anyway, and this will make 
+# redirections work in a sensible way.
+#
+#ServerName www.example.com:80
+
+#
+# UseCanonicalName: Determines how Apache constructs self-referencing 
+# URLs and the SERVER_NAME and SERVER_PORT variables.
+# When set "Off", Apache will use the Hostname and Port supplied
+# by the client.  When set "On", Apache will use the value of the
+# ServerName directive.
+#
+UseCanonicalName Off
+
+#
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+DocumentRoot "/var/www/localhost/htdocs"
+
+#
+# Each directory to which Apache has access can be configured with respect
+# to which services and features are allowed and/or disabled in that
+# directory (and its subdirectories). 
+#
+# First, we configure the "default" to be a very restrictive set of 
+# features.  
+#
+<Directory />
+    Options FollowSymLinks
+    AllowOverride None
+</Directory>
+
+#
+# Note that from this point forward you must specifically allow
+# particular features to be enabled - so if something's not working as
+# you might expect, make sure that you have specifically enabled it
+# below.
+#
+
+#
+# This should be changed to whatever you set DocumentRoot to.
+#
+<Directory "/var/www/localhost/htdocs">
+
+#
+# Possible values for the Options directive are "None", "All",
+# or any combination of:
+#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
+#
+# Note that "MultiViews" must be named *explicitly* --- "Options All"
+# doesn't give it to you.
+#
+# The Options directive is both complicated and important.  Please see
+# http://httpd.apache.org/docs/2.2/mod/core.html#options
+# for more information.
+#
+    Options Indexes FollowSymLinks
+
+#
+# AllowOverride controls what directives may be placed in .htaccess files.
+# It can be "All", "None", or any combination of the keywords:
+#   Options FileInfo AuthConfig Limit
+#
+    AllowOverride None
+
+#
+# Controls who can get stuff from this server.
+#
+    Order allow,deny
+    Allow from all
+
+</Directory>
+
+#
+# UserDir: The name of the directory that is appended onto a user's home
+# directory if a ~user request is received.
+#
+# The path to the end user account 'public_html' directory must be
+# accessible to the webserver userid.  This usually means that ~userid
+# must have permissions of 711, ~userid/public_html must have permissions
+# of 755, and documents contained therein must be world-readable.
+# Otherwise, the client will only receive a "403 Forbidden" message.
+#
+# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
+#
+<IfModule mod_userdir.c>
+    #
+    # UserDir is disabled by default since it can confirm the presence
+    # of a username on the system (depending on home directory
+    # permissions).
+    #
+    UserDir disabled
+
+    #
+    # To enable requests to /~user/ to serve the user's public_html
+    # directory, remove the "UserDir disabled" line above, and uncomment
+    # the following line instead:
+    # 
+    #UserDir public_html
+
+</IfModule>
+
+#
+# Control access to UserDir directories.  The following is an example
+# for a site where these directories are restricted to read-only.
+#
+#<Directory /home/*/public_html>
+#    AllowOverride FileInfo AuthConfig Limit
+#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
+#    <Limit GET POST OPTIONS>
+#        Order allow,deny
+#        Allow from all
+#    </Limit>
+#    <LimitExcept GET POST OPTIONS>
+#        Order deny,allow
+#        Deny from all
+#    </LimitExcept>
+#</Directory>
+
+#
+# DirectoryIndex: sets the file that Apache will serve if a directory
+# is requested.
+#
+# The index.html.var file (a type-map) is used to deliver content-
+# negotiated documents.  The MultiViews Option can be used for the 
+# same purpose, but it is much slower.
+#
+DirectoryIndex index.html index.html.var
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives.  See also the AllowOverride
+# directive.
+#
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being 
+# viewed by Web clients. 
+#
+<Files ~ "^\.ht">
+    Order allow,deny
+    Deny from all
+    Satisfy All
+</Files>
+
+#
+# TypesConfig describes where the mime.types file (or equivalent) is
+# to be found.
+#
+TypesConfig /etc/apache2/mime.types
+
+#
+# DefaultType is the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value.  If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+#
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type.  The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+#
+<IfModule mod_mime_magic.c>
+#   MIMEMagicFile /usr/share/magic.mime
+    MIMEMagicFile conf/magic
+</IfModule>
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+#
+# EnableMMAP: Control whether memory-mapping is used to deliver
+# files (assuming that the underlying OS supports it).
+# The default is on; turn this off if you serve from NFS-mounted 
+# filesystems.  On some systems, turning it off (regardless of
+# filesystem) can improve performance; for details, please see
+# http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap
+#
+#EnableMMAP off
+
+#
+# EnableSendfile: Control whether the sendfile kernel support is 
+# used to deliver files (assuming that the OS supports it). 
+# The default is on; turn this off if you serve from NFS-mounted 
+# filesystems.  Please see
+# http://httpd.apache.org/docs/2.2/mod/core.html#enablesendfile
+#
+#EnableSendfile off
+
+#
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog logs/error.log
+
+#
+# LogLevel: Control the number of messages logged to the error.log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+#
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %b" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+# "combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this
+# requires the mod_logio module to be loaded.
+#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
+
+#
+# The location and format of the access logfile (Common Logfile Format).
+# If you do not define any access logfiles within a <VirtualHost>
+# container, they will be logged here.  Contrariwise, if you *do*
+# define per-<VirtualHost> access logfiles, transactions will be
+# logged therein and *not* in this file.
+#
+#CustomLog logs/access.log common
+
+#
+# If you would like to have separate agent and referer logfiles, uncomment
+# the following directives.
+#
+#CustomLog logs/referer.log referer
+#CustomLog logs/agent.log agent
+
+#
+# For a single logfile with access, agent, and referer information
+# (Combined Logfile Format), use the following directive:
+#
+CustomLog logs/access.log combined
+
+#
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (internal error documents, FTP directory
+# listings, mod_status and mod_info output etc., but not CGI generated
+# documents or custom error documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of:  On | Off | EMail
+#
+ServerSignature On
+
+#
+# Aliases: Add here as many aliases as you need (with no limit). The format is 
+# Alias fakename realname
+#
+# Note that if you include a trailing / on fakename then the server will
+# require it to be present in the URL.  So "/icons" isn't aliased in this
+# example, only "/icons/".  If the fakename is slash-terminated, then the 
+# realname must also be slash terminated, and if the fakename omits the 
+# trailing slash, the realname must also omit it.
+#
+# We include the /icons/ alias for FancyIndexed directory listings.  If you
+# do not use FancyIndexing, you may comment this out.
+#
+Alias /icons/ "/usr/share/apache2/icons/"
+
+<Directory "/usr/share/apache2/icons">
+    Options Indexes MultiViews FollowSymLinks
+    AllowOverride None
+    Order allow,deny
+    Allow from all
+</Directory>
+
+#
+# WebDAV module configuration section.
+# 
+<IfModule mod_dav_fs.c>
+    # Location of the WebDAV lock database.
+    DAVLockDB /var/lib/dav/lockdb
+</IfModule>
+
+#
+# ScriptAlias: This controls which directories contain server scripts.
+# ScriptAliases are essentially the same as Aliases, except that
+# documents in the realname directory are treated as applications and
+# run by the server when requested rather than as documents sent to the client.
+# The same rules about trailing "/" apply to ScriptAlias directives as to
+# Alias.
+#
+ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
+
+#
+# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+#
+<Directory "/var/www/cgi-bin">
+    AllowOverride None
+    Options None
+    Order allow,deny
+    Allow from all
+</Directory>
+
+#
+# Redirect allows you to tell clients about documents which used to exist in
+# your server's namespace, but do not anymore. This allows you to tell the
+# clients where to look for the relocated document.
+# Example:
+# Redirect permanent /foo http://www.example.com/bar
+
+#
+# Directives controlling the display of server-generated directory listings.
+#
+
+#
+# IndexOptions: Controls the appearance of server-generated directory
+# listings.
+#
+IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8
+
+#
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions.  These are only displayed for
+# FancyIndexed directories.
+#
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+#
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+#
+DefaultIcon /icons/unknown.gif
+
+#
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes.  These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+#
+#AddDescription "GZIP compressed document" .gz
+#AddDescription "tar archive" .tar
+#AddDescription "GZIP compressed tar archive" .tgz
+
+#
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+#
+# HeaderName is the name of a file which should be prepended to
+# directory indexes. 
+ReadmeName README.html
+HeaderName HEADER.html
+
+#
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing.  Shell-style wildcarding is permitted.
+#
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+
+#
+# DefaultLanguage and AddLanguage allows you to specify the language of 
+# a document. You can then use content negotiation to give a browser a 
+# file in a language the user can understand.
+#
+# Specify a default language. This means that all data
+# going out without a specific language tag (see below) will 
+# be marked with this one. You probably do NOT want to set
+# this unless you are sure it is correct for all cases.
+#
+# * It is generally better to not mark a page as 
+# * being a certain language than marking it with the wrong
+# * language!
+#
+# DefaultLanguage nl
+#
+# Note 1: The suffix does not have to be the same as the language
+# keyword --- those with documents in Polish (whose net-standard
+# language code is pl) may wish to use "AddLanguage pl .po" to
+# avoid the ambiguity with the common suffix for perl scripts.
+#
+# Note 2: The example entries below illustrate that in some cases 
+# the two character 'Language' abbreviation is not identical to 
+# the two character 'Country' code for its country,
+# E.g. 'Danmark/dk' versus 'Danish/da'.
+#
+# Note 3: In the case of 'ltz' we violate the RFC by using a three char
+# specifier. There is 'work in progress' to fix this and get
+# the reference data for rfc1766 cleaned up.
+#
+# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
+# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
+# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
+# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
+# Norwegian (no) - Polish (pl) - Portugese (pt)
+# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
+# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
+#
+AddLanguage ca .ca
+AddLanguage cs .cz .cs
+AddLanguage da .dk
+AddLanguage de .de
+AddLanguage el .el
+AddLanguage en .en
+AddLanguage eo .eo
+AddLanguage es .es
+AddLanguage et .et
+AddLanguage fr .fr
+AddLanguage he .he
+AddLanguage hr .hr
+AddLanguage it .it
+AddLanguage ja .ja
+AddLanguage ko .ko
+AddLanguage ltz .ltz
+AddLanguage nl .nl
+AddLanguage nn .nn
+AddLanguage no .no
+AddLanguage pl .po
+AddLanguage pt .pt
+AddLanguage pt-BR .pt-br
+AddLanguage ru .ru
+AddLanguage sv .sv
+AddLanguage zh-CN .zh-cn
+AddLanguage zh-TW .zh-tw
+
+#
+# LanguagePriority allows you to give precedence to some languages
+# in case of a tie during content negotiation.
+#
+# Just list the languages in decreasing order of preference. We have
+# more or less alphabetized them here. You probably want to change this.
+#
+LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
+
+#
+# ForceLanguagePriority allows you to serve a result page rather than
+# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
+# [in case no accepted languages matched the available variants]
+#
+ForceLanguagePriority Prefer Fallback
+
+#
+# Specify a default charset for all content served; this enables
+# interpretation of all content as UTF-8 by default.  To use the 
+# default browser choice (ISO-8859-1), or to allow the META tags
+# in HTML content to override this choice, comment out this
+# directive:
+#
+AddDefaultCharset UTF-8
+
+#
+# AddType allows you to add to or override the MIME configuration
+# file mime.types for specific file types.
+#
+#AddType application/x-tar .tgz
+
+#
+# AddEncoding allows you to have certain browsers uncompress
+# information on the fly. Note: Not all browsers support this.
+# Despite the name similarity, the following Add* directives have nothing
+# to do with the FancyIndexing customization directives above.
+#
+#AddEncoding x-compress .Z
+#AddEncoding x-gzip .gz .tgz
+
+# If the AddEncoding directives above are commented-out, then you
+# probably should define those extensions to indicate media types:
+#
+AddType application/x-compress .Z
+AddType application/x-gzip .gz .tgz
+
+#
+#   MIME-types for downloading Certificates and CRLs
+#
+AddType application/x-x509-ca-cert .crt
+AddType application/x-pkcs7-crl    .crl
+
+#
+# AddHandler allows you to map certain file extensions to "handlers":
+# actions unrelated to filetype. These can be either built into the server
+# or added with the Action directive (see below)
+#
+# To use CGI scripts outside of ScriptAliased directories:
+# (You will also need to add "ExecCGI" to the "Options" directive.)
+#
+#AddHandler cgi-script .cgi
+
+#
+# For files that include their own HTTP headers:
+#
+#AddHandler send-as-is asis
+
+#
+# For type maps (negotiated resources):
+# (This is enabled by default to allow the Apache "It Worked" page
+#  to be distributed in multiple languages.)
+#
+AddHandler type-map var
+
+#
+# Filters allow you to process content before it is sent to the client.
+#
+# To parse .shtml files for server-side includes (SSI):
+# (You will also need to add "Includes" to the "Options" directive.)
+#
+AddType text/html .shtml
+AddOutputFilter INCLUDES .shtml
+
+#
+# Action lets you define media types that will execute a script whenever
+# a matching file is called. This eliminates the need for repeated URL
+# pathnames for oft-used CGI file processors.
+# Format: Action media/type /cgi-script/location
+# Format: Action handler-name /cgi-script/location
+#
+
+#
+# Customizable error responses come in three flavors:
+# 1) plain text 2) local redirects 3) external redirects
+#
+# Some examples:
+#ErrorDocument 500 "The server made a boo boo."
+#ErrorDocument 404 /missing.html
+#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
+#ErrorDocument 402 http://www.example.com/subscription_info.html
+#
+
+#
+# Putting this all together, we can internationalize error responses.
+#
+# We use Alias to redirect any /error/HTTP_<error>.html.var response to
+# our collection of by-error message multi-language collections.  We use 
+# includes to substitute the appropriate text.
+#
+# You can modify the messages' appearance without changing any of the
+# default HTTP_<error>.html.var files by adding the line:
+#
+#   Alias /error/include/ "/your/include/path/"
+#
+# which allows you to create your own set of files by starting with the
+# /var/www/error/include/ files and
+# copying them to /your/include/path/, even on a per-VirtualHost basis.
+#
+
+Alias /error/ "/usr/share/apache2/error/"
+
+<IfModule mod_negotiation.c>
+<IfModule mod_include.c>
+    <Directory "/usr/share/apache2/error">
+        AllowOverride None
+        Options IncludesNoExec
+        AddOutputFilter Includes html
+        AddHandler type-map var
+        Order allow,deny
+        Allow from all
+        LanguagePriority en es de fr
+        ForceLanguagePriority Prefer Fallback
+    </Directory>
+
+#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
+#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
+#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
+#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
+#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
+#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
+#    ErrorDocument 410 /error/HTTP_GONE.html.var
+#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
+#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
+#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
+#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
+#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
+#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
+#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
+#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
+#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
+#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
+
+</IfModule>
+</IfModule>
+
+#
+# The following directives modify normal HTTP response behavior to
+# handle known problems with browser implementations.
+#
+BrowserMatch "Mozilla/2" nokeepalive
+BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
+BrowserMatch "RealPlayer 4\.0" force-response-1.0
+BrowserMatch "Java/1\.0" force-response-1.0
+BrowserMatch "JDK/1\.0" force-response-1.0
+
+#
+# The following directive disables redirects on non-GET requests for
+# a directory that does not include the trailing slash.  This fixes a 
+# problem with Microsoft WebFolders which does not appropriately handle 
+# redirects for folders with DAV methods.
+# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
+#
+BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
+BrowserMatch "MS FrontPage" redirect-carefully
+BrowserMatch "^WebDrive" redirect-carefully
+BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
+BrowserMatch "^gnome-vfs/1.0" redirect-carefully
+BrowserMatch "^XML Spy" redirect-carefully
+BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
+
+#
+# Allow server status reports generated by mod_status,
+# with the URL of http://servername/server-status
+# Change the ".example.com" to match your domain to enable.
+#
+#<Location /server-status>
+#    SetHandler server-status
+#    Order deny,allow
+#    Deny from all
+#    Allow from .example.com
+#</Location>
+
+#
+# Allow remote server configuration reports, with the URL of
+#  http://servername/server-info (requires that mod_info.c be loaded).
+# Change the ".example.com" to match your domain to enable.
+#
+#<Location /server-info>
+#    SetHandler server-info
+#    Order deny,allow
+#    Deny from all
+#    Allow from .example.com
+#</Location>
+
+#
+# Proxy Server directives. Uncomment the following lines to
+# enable the proxy server:
+#
+#<IfModule mod_proxy.c>
+#ProxyRequests On
+#
+#<Proxy *>
+#    Order deny,allow
+#    Deny from all
+#    Allow from .example.com
+#</Proxy>
+
+#
+# Enable/disable the handling of HTTP/1.1 "Via:" headers.
+# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
+# Set to one of: Off | On | Full | Block
+#
+#ProxyVia On
+
+#
+# To enable a cache of proxied content, uncomment the following lines.
+# See http://httpd.apache.org/docs/2.2/mod/mod_cache.html for more details.
+#
+#<IfModule mod_disk_cache.c>
+#   CacheEnable disk /
+#   CacheRoot "/var/cache/mod_proxy"
+#</IfModule>
+#
+
+#</IfModule>
+# End of proxy directives.
+
+### Section 3: Virtual Hosts
+#
+# VirtualHost: If you want to maintain multiple domains/hostnames on your
+# machine you can setup VirtualHost containers for them. Most configurations
+# use only name-based virtual hosts so the server doesn't need to worry about
+# IP addresses. This is indicated by the asterisks in the directives below.
+#
+# Please see the documentation at 
+# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
+# for further details before you try to setup virtual hosts.
+#
+# You may use the command line option '-S' to verify your virtual host
+# configuration.
+
+#
+# Use name-based virtual hosting.
+#
+#NameVirtualHost *:80
+#
+# NOTE: NameVirtualHost cannot be used without a port specifier 
+# (e.g. :80) if mod_ssl is being used, due to the nature of the
+# SSL protocol.
+#
+
+#
+# VirtualHost example:
+# Almost any Apache directive may go into a VirtualHost container.
+# The first VirtualHost section is used for requests without a known
+# server name.
+#
+#<VirtualHost *:80>
+#    ServerAdmin webmaster@dummy-host.example.com
+#    DocumentRoot /var/www/dummy-host.example.com/htdocs
+#    ServerName dummy-host.example.com
+#    ErrorLog logs/dummy-host.example.com-error.log
+#    CustomLog logs/dummy-host.example.com-access.log common
+#</VirtualHost>
diff --git a/main/apache2/ssl.conf b/main/apache2/ssl.conf
new file mode 100644
index 000000000..8b156ebbc
--- /dev/null
+++ b/main/apache2/ssl.conf
@@ -0,0 +1,223 @@
+#
+# This is the Apache server configuration file providing SSL support.
+# It contains the configuration directives to instruct the server how to
+# serve pages over an https connection. For detailing information about these 
+# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
+# 
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+
+LoadModule ssl_module modules/mod_ssl.so
+
+#
+# When we also provide SSL we have to listen to the 
+# the HTTPS port in addition.
+#
+Listen 443
+
+##
+##  SSL Global Context
+##
+##  All SSL configuration in this context applies both to
+##  the main server and all SSL-enabled virtual hosts.
+##
+
+#   Pass Phrase Dialog:
+#   Configure the pass phrase gathering process.
+#   The filtering dialog program (`builtin' is a internal
+#   terminal dialog) has to provide the pass phrase on stdout.
+SSLPassPhraseDialog  builtin
+
+#   Inter-Process Session Cache:
+#   Configure the SSL Session Cache: First the mechanism 
+#   to use and second the expiring timeout (in seconds).
+#SSLSessionCache        dc:UNIX:/var/cache/mod_ssl/distcache
+SSLSessionCache         shmcb:/var/cache/mod_ssl/scache(512000)
+SSLSessionCacheTimeout  300
+
+#   Semaphore:
+#   Configure the path to the mutual exclusion semaphore the
+#   SSL engine uses internally for inter-process synchronization. 
+SSLMutex default
+
+#   Pseudo Random Number Generator (PRNG):
+#   Configure one or more sources to seed the PRNG of the 
+#   SSL library. The seed data should be of good random quality.
+#   WARNING! On some platforms /dev/random blocks if not enough entropy
+#   is available. This means you then cannot use the /dev/random device
+#   because it would lead to very long connection times (as long as
+#   it requires to make more entropy available). But usually those
+#   platforms additionally provide a /dev/urandom device which doesn't
+#   block. So, if available, use this one instead. Read the mod_ssl User
+#   Manual for more details.
+SSLRandomSeed startup file:/dev/urandom  256
+SSLRandomSeed connect builtin
+#SSLRandomSeed startup file:/dev/random  512
+#SSLRandomSeed connect file:/dev/random  512
+#SSLRandomSeed connect file:/dev/urandom 512
+
+#
+# Use "SSLCryptoDevice" to enable any supported hardware
+# accelerators. Use "openssl engine -v" to list supported
+# engine names.  NOTE: If you enable an accelerator and the
+# server does not start, consult the error logs and ensure
+# your accelerator is functioning properly. 
+#
+SSLCryptoDevice builtin
+#SSLCryptoDevice ubsec
+
+##
+## SSL Virtual Host Context
+##
+
+<VirtualHost _default_:443>
+
+# General setup for the virtual host, inherited from global configuration
+#DocumentRoot "/var/www/html"
+#ServerName www.example.com:443
+
+# Use separate log files for the SSL virtual host; note that LogLevel
+# is not inherited from httpd.conf.
+ErrorLog logs/ssl_error.log
+TransferLog logs/ssl_access.log
+LogLevel warn
+
+#   SSL Engine Switch:
+#   Enable/Disable SSL for this virtual host.
+SSLEngine on
+
+#   SSL Protocol support:
+# List the enable protocol levels with which clients will be able to
+# connect.  Disable SSLv2 access by default:
+SSLProtocol all -SSLv2
+
+#   SSL Cipher Suite:
+# List the ciphers that the client is permitted to negotiate.
+# See the mod_ssl documentation for a complete list.
+SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM:+LOW
+
+#   Server Certificate:
+# Point SSLCertificateFile at a PEM encoded certificate.  If
+# the certificate is encrypted, then you will be prompted for a
+# pass phrase.  Note that a kill -HUP will prompt again.  A new
+# certificate can be generated using the genkey(1) command.
+SSLCertificateFile /etc/ssl/apache2/server.pem
+
+#   Server Private Key:
+#   If the key is not combined with the certificate, use this
+#   directive to point at the key file.  Keep in mind that if
+#   you've both a RSA and a DSA private key you can configure
+#   both in parallel (to also allow the use of DSA ciphers, etc.)
+SSLCertificateKeyFile /etc/ssl/apache2/server.key
+
+#   Server Certificate Chain:
+#   Point SSLCertificateChainFile at a file containing the
+#   concatenation of PEM encoded CA certificates which form the
+#   certificate chain for the server certificate. Alternatively
+#   the referenced file can be the same as SSLCertificateFile
+#   when the CA certificates are directly appended to the server
+#   certificate for convinience.
+#SSLCertificateChainFile /etc/ssl/apache2/server-chain.crt
+
+#   Certificate Authority (CA):
+#   Set the CA certificate verification path where to find CA
+#   certificates for client authentication or alternatively one
+#   huge file containing all of them (file must be PEM encoded)
+#SSLCACertificateFile /etc/ssl/apache2/ca-bundle.crt
+
+#   Client Authentication (Type):
+#   Client certificate verification type and depth.  Types are
+#   none, optional, require and optional_no_ca.  Depth is a
+#   number which specifies how deeply to verify the certificate
+#   issuer chain before deciding the certificate is not valid.
+#SSLVerifyClient require
+#SSLVerifyDepth  10
+
+#   Access Control:
+#   With SSLRequire you can do per-directory access control based
+#   on arbitrary complex boolean expressions containing server
+#   variable checks and other lookup directives.  The syntax is a
+#   mixture between C and Perl.  See the mod_ssl documentation
+#   for more details.
+#<Location />
+#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
+#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
+#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
+#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
+#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
+#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
+#</Location>
+
+#   SSL Engine Options:
+#   Set various options for the SSL engine.
+#   o FakeBasicAuth:
+#     Translate the client X.509 into a Basic Authorisation.  This means that
+#     the standard Auth/DBMAuth methods can be used for access control.  The
+#     user name is the `one line' version of the client's X.509 certificate.
+#     Note that no password is obtained from the user. Every entry in the user
+#     file needs this password: `xxj31ZMTZzkVA'.
+#   o ExportCertData:
+#     This exports two additional environment variables: SSL_CLIENT_CERT and
+#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
+#     server (always existing) and the client (only existing when client
+#     authentication is used). This can be used to import the certificates
+#     into CGI scripts.
+#   o StdEnvVars:
+#     This exports the standard SSL/TLS related `SSL_*' environment variables.
+#     Per default this exportation is switched off for performance reasons,
+#     because the extraction step is an expensive operation and is usually
+#     useless for serving static content. So one usually enables the
+#     exportation for CGI and SSI requests only.
+#   o StrictRequire:
+#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
+#     under a "Satisfy any" situation, i.e. when it applies access is denied
+#     and no other module can change it.
+#   o OptRenegotiate:
+#     This enables optimized SSL connection renegotiation handling when SSL
+#     directives are used in per-directory context. 
+#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
+<Files ~ "\.(cgi|shtml|phtml|php3?)$">
+    SSLOptions +StdEnvVars
+</Files>
+<Directory "/var/www/cgi-bin">
+    SSLOptions +StdEnvVars
+</Directory>
+
+#   SSL Protocol Adjustments:
+#   The safe and default but still SSL/TLS standard compliant shutdown
+#   approach is that mod_ssl sends the close notify alert but doesn't wait for
+#   the close notify alert from client. When you need a different shutdown
+#   approach you can use one of the following variables:
+#   o ssl-unclean-shutdown:
+#     This forces an unclean shutdown when the connection is closed, i.e. no
+#     SSL close notify alert is send or allowed to received.  This violates
+#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
+#     this when you receive I/O errors because of the standard approach where
+#     mod_ssl sends the close notify alert.
+#   o ssl-accurate-shutdown:
+#     This forces an accurate shutdown when the connection is closed, i.e. a
+#     SSL close notify alert is send and mod_ssl waits for the close notify
+#     alert of the client. This is 100% SSL/TLS standard compliant, but in
+#     practice often causes hanging connections with brain-dead browsers. Use
+#     this only for browsers where you know that their SSL implementation
+#     works correctly. 
+#   Notice: Most problems of broken clients are also related to the HTTP
+#   keep-alive facility, so you usually additionally want to disable
+#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
+#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
+#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
+#   "force-response-1.0" for this.
+SetEnvIf User-Agent ".*MSIE.*" \
+         nokeepalive ssl-unclean-shutdown \
+         downgrade-1.0 force-response-1.0
+
+#   Per-Server Logging:
+#   The home of a custom SSL log file. Use this when you want a
+#   compact non-error SSL logfile on a virtual host basis.
+CustomLog logs/ssl_request.log \
+          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
+
+</VirtualHost>                                  
+