testing/fprobe: new aport

3 files changed, 141 insertions, 0 deletions

diff --git a/testing/fprobe/APKBUILD b/testing/fprobe/APKBUILD
new file mode 100644
index 0000000000..6005359936
--- /dev/null
+++ b/testing/fprobe/APKBUILD
@@ -0,0 +1,32 @@
+# Contributor: Carlo Landmeter <clandmeter@gmail.com>
+# Maintainer: Carlo Landmeter <clandmeter@gmail.com>
+pkgname=fprobe
+pkgver=1.1
+pkgrel=0
+pkgdesc="libpcap-based tool that collect network traffic"
+url="http://fprobe.sourceforge.net/"
+license="GPL"
+depends="uclibc"
+makedepends="libpcap-dev"
+subpackages="$pkgname-doc"
+source="http://downloads.sourceforge.net/$pkgname/$pkgname-$pkgver.tar.bz2
+$pkgname.initd
+$pkgname.confd"
+
+build() {
+	cd "$srcdir/$pkgname-$pkgver"
+
+	./configure --prefix=/usr \
+		--sysconfdir=/etc \
+		--mandir=/usr/share/man \
+		--infodir=/usr/share/info
+	make || return 1
+	make DESTDIR="$pkgdir" install
+
+	install -m755 -D "$srcdir"/$pkgname.initd "$pkgdir"/etc/init.d/$pkgname
+	install -m644 -D "$srcdir"/$pkgname.confd "$pkgdir"/etc/conf.d/$pkgname
+}
+
+md5sums="65850d0470078269b33eee58cba77ac2  fprobe-1.1.tar.bz2
+a682fef5ba72855db5d67b62c88ffaf0  fprobe.initd
+ba9c9327456e4db897b60481705df282  fprobe.confd"
diff --git a/testing/fprobe/fprobe.confd b/testing/fprobe/fprobe.confd
new file mode 100644
index 0000000000..1c444f554e
--- /dev/null
+++ b/testing/fprobe/fprobe.confd
@@ -0,0 +1,70 @@
+# Config file for /etc/init.d/fprobe
+
+# Do we want the interface in promiscous mode [yes/no]
+#PROMISC=no
+
+# Interface
+IFACE=eth0
+
+# If configured, only capture packets matching this tcpdump expression
+#FILTER=""
+
+# Flow state timers
+#TIMER_EXPIRED=5
+#TIMER_FRAGMENTED=30
+#TIMER_IDLE=60
+#TIMER_ACTIVE=300
+
+# This is the default and should be left unless you know what you are doing
+#FLOW_VER=5
+
+# local ip. if configured fprobe will use this as the source IP for sending ALL flow data
+# If you want to specify a specific source address per collecter, customize it below
+#LOCALIP=
+
+# SNMP iface id
+SNMP_IFACE="${IFACE//eth}"
+
+# Maximum number of concurrent flows to track
+# using a specified amount of memory
+#MEMBULK=10000
+#MEMLIMIT=
+
+# Pending queue
+#PENDING=100
+
+# Kernel capture buffer size (kB)
+#KERNBUF=1024
+
+# Realtime priority [0=disabled, 1..99]
+#RTPRIO=0
+
+# Delay N nanoseconds after each B bytes
+#DELAY="0:0"
+
+# How much of the start of each packet to grab
+#SNAPLEN=256
+
+# chroot() to this location after startup
+CHROOT="/var/empty"
+
+# User to run as. must have perms to the pidfile directory /var/run/fprobe/
+USER=nobody
+
+# logging level for syslog (0=EMERG, ..., 6=INFO, 7=DEBUG)
+#LOGLEVEL=6
+
+# If you want to run multiple instances of fprobe,
+# You MUST set this variable to a unique INTEGER for each one!
+PIDFILE_ID=''
+
+# remote ip. this is where we send flows
+REMOTEIP=127.0.0.1
+# port to listen on
+PORT=2055
+# Collector type, see the manpage for valid types
+TYPE=''
+
+# If you want multiple collectors, just specify each one here
+COLLECTORS="${REMOTEIP}:${PORT}/${LOCALIP}/${TYPE}"
+
diff --git a/testing/fprobe/fprobe.initd b/testing/fprobe/fprobe.initd
new file mode 100644
index 0000000000..b2ee6ded84
--- /dev/null
+++ b/testing/fprobe/fprobe.initd
@@ -0,0 +1,39 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+depend() {
+	need net
+}
+
+BIN=/usr/sbin/fprobe
+PIDFILE_EXTRA=""
+[ -n "$PIDFILE_ID" ] && PIDFILE_EXTRA="[$PIDFILE_ID]"
+PIDFILE="/var/run/fprobe$PIDFILE_EXTRA.pid"
+
+start() {
+	ebegin "Starting fprobe"
+	local OPTS=""
+	[ "${PROMISC}" == "yes" ] || OPTS="${OPTS} -p"
+	[ -n "${FILTER}" ] && OPTS="${OPTS} -f '${FILTER}'"
+	for optname in i:IFACE s:TIMER_EXPIRED g:TIME_FRAGMENTED d:TIMER_IDLE \
+		e:TIMER_ACTIVE n:FLOW_VER a:LOCALIP x:SNMP_IFACE b:MEMBULK \
+		m:MEMLIMIT q:PENDING B:KERNBUF r:RTPRIO t:DELAY S:SNAPLEN \
+		c:CHROOT u:USER v:LOGLEVEL ; do
+	    opt="${optname/:*}"	optvar="${optname/*:}"
+	    eval optvalue="\$$optvar"
+	    [ -n "$optvalue" ] && OPTS="${OPTS} -${opt} ${optvalue}"
+	done
+	OPTS="${OPTS} -l 1:${PIDFILE_ID} ${COLLECTORS}"
+	start-stop-daemon --start --exec $BIN \
+		--pidfile ${PIDFILE} \
+		-- ${OPTS}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping fprobe"
+	start-stop-daemon --stop --quiet --exec $BIN \
+		--pidfile ${PIDFILE}
+	eend $?
+}