community/qpage: moved from testing

6 files changed, 0 insertions, 398 deletions

diff --git a/testing/qpage/APKBUILD b/testing/qpage/APKBUILD
deleted file mode 100644
index 96e0b12249..0000000000
--- a/testing/qpage/APKBUILD
+++ /dev/null
@@ -1,47 +0,0 @@
-# Contributor: Francesco Colista <francesco.colista@gmail.com>
-# Maintainer: Francesco Colista <francesco.colista@gmail.com>
-pkgname=qpage
-pkgver=3.3
-pkgrel=2
-pkgdesc="Sends messages to an alphanumeric pager via TAP protocol."
-url="http://www.qpage.org/"
-arch="all"
-license="Custom"
-depends=""
-depends_dev=
-makedepends="$depends_dev"
-install="$pkgname.pre-install $pkgname.post-install"
-source="$pkgname-$pkgver.tar.gz::http://archive.debian.org/debian/pool/non-free/q/$pkgname/"$pkgname"_3.3final.orig.tar.gz
-	config.input
-	qpage.initd
-	qpage.patch
-	"
-_builddir="$srcdir"/$pkgname-$pkgver
-prepare() {
-	cd "$_builddir"
-	for i in $source; do
-		case $i in
-		*.patch) msg $i; patch -p1 -i "$srcdir"/$i || return 1;;
-		esac
-	done
-}
-build() {
-	cd "$_builddir"
-	cp -f "$srcdir"/config.input "$_builddir" || return 1
-	./configure --prefix=/usr \
-        	    --sysconfdir=/etc \
-                    --localstatedir=/var
-       make || return 1
-}
-package() {
-	mkdir -p "$pkgdir"/usr/bin
-	mkdir -p "$pkgdir"/etc/qpage
-	install -m755 "$_builddir"/$pkgname "$pkgdir"/usr/bin/"$pkgname"
-	install -m644 -D "$_builddir"/example.cf "$pkgdir"/etc/qpage/qpage.conf.example
-	install -m644 -D "$_builddir"/LICENSE "$pkgdir"/usr/share/licenses/$pkgname/LICENSE
-	install -m755 -D "$srcdir"/$pkgname.initd "$pkgdir"/etc/init.d/$pkgname
-}
-md5sums="eb98faaa51f89db68ecf7668f5294309  qpage-3.3.tar.gz
-3ac8c6e2aede9e195eba2555eb3b4645  config.input
-f439315da04ebdd1e1cc2840171d45d3  qpage.initd
-e8a4a6926973c940fe34dc6c4e892606  qpage.patch"
diff --git a/testing/qpage/config.input b/testing/qpage/config.input
deleted file mode 100644
index e133cb36a7..0000000000
--- a/testing/qpage/config.input
+++ /dev/null
@@ -1,83 +0,0 @@
-#########################################################
-#                                                       #
-#  Almost all of the QuickPage configuration options    #
-#  can be controlled at run-time by keywords in the     #
-#  configuration file.  However, there is a small       #
-#  set of options that must be defined at compile       #
-#  time.                                                #
-#                                                       #
-#  Here are the compile-time configuration options.     #
-#  Edit these as appropriate for your environment.      #
-#                                                       #
-#  Note: This file is sourced by the configure script.  #
-#  Do not make any changes incompatible with /bin/sh.   #
-#                                                       #
-#########################################################
-
-
-#
-# QPAGE_CONFIG defines the location of the configuration file.
-# See the QuickPage documentation for complete details about
-# the syntax of the configuration file.
-#
-QPAGE_CONFIG="/etc/qpage/qpage.cf"
-
-
-#
-# SNPP_SERVER defines the default name of the SNPP server.
-# The default is localhost.  This is probably not appropriate
-# for most network configurations; change this to the machine
-# where you intend to run the QuickPage daemon.  Multiple
-# hostnames can be specified by separating them with commas.
-#
-SNPP_SERVER="localhost"
-
-
-#
-# SNPP_SERVER_FILE defines a filename containing one or
-# more hostnames of SNPP servers.  QuickPage clients
-# read this file (if it exists) to locate a server.  All
-# servers listed in this file are assumed to have identical
-# copies of the configuration file.  Only one filename
-# may be specified.
-#
-SNPP_SERVER_FILE="/etc/qpage/qpage.servers"
-
-
-#
-# DAEMON_USER specifies which user the QuickPage daemon
-# should run as after dropping root privileges.  If a
-# userid or UID is specified and a password entry exists
-# for that user, QuickPage will assume all group privileges
-# assigned to that user.
-#
-DAEMON_USER="qpage"
-
-
-#
-# SYSLOG_FACILITY defines which syslog facility should be
-# used by QuickPage to log messages.  See the syslog
-# documentation (i.e. "man syslog") for more information.
-#
-SYSLOG_FACILITY=LOG_DAEMON
-
-
-#
-# SENDMAIL_PATH defines where sendmail (or equivalent) is
-# located on your system.  QuickPage uses sendmail to send
-# status messages about failed and/or high-priority pages.
-# Whatever you specify here will be invoked with exactly
-# three arguments:
-#
-#    arg1: "-f"
-#    arg2: "<>"
-#    arg3: user@host
-#
-# The first two arguments tell sendmail to use a null return
-# path (see RFC1123 section 5.2.9) so that bogus e-mail
-# addresses will not annoy the postmaster.
-#
-# If you leave this variable commented out, "configure" will
-# attempt to locate the correct path for your system automatically.
-#
-#SENDMAIL_PATH=/usr/lib/sendmail
diff --git a/testing/qpage/qpage.initd b/testing/qpage/qpage.initd
deleted file mode 100644
index 6d5528766a..0000000000
--- a/testing/qpage/qpage.initd
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/sbin/runscript
-#
-# Startup for QuickPage
-#
-
-OPTS_ARGS="q10"
-
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-
-start() {
-	ebegin "Starting QuickPage daemon"
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec qpage -- ${OPTS_ARGS} >/dev/null
-	eend $?
-}
-
-stop() {
-	ebegin "Stopping QuickPage daemon" 
-
-	pid=`ps -e | grep qpage | awk '{print $1}'`
-	if [ ! -z "$pid" ]; then
-		kill $pid > /dev/null 2>&1
-	fi
-	eend $?
-}
-exit 0
diff --git a/testing/qpage/qpage.patch b/testing/qpage/qpage.patch
deleted file mode 100644
index d998942d50..0000000000
--- a/testing/qpage/qpage.patch
+++ /dev/null
@@ -1,231 +0,0 @@
-diff -crB a/CHANGES b/CHANGES
-*** a/CHANGES	1999-01-02 16:15:03.000000000 +1300
---- b/CHANGES	2011-01-27 09:56:40.202300708 +1300
-***************
-*** 1,4 ****
---- 1,15 ----
-+ 		Changes to QuickPage from v3.3 to v3.3.1-unleash
-+ 		------------------------------------------------
-+ 		Patch by Michael Fincham <michael@unleash.co.nz>
-  
-+ 	- The new "-b" option has been added to specify a bind address 
-+ 	  for the qpage daemon.
-+ 
-+ 	- The default user the daemon runs as is now "qpage" instead 
-+ 	  of "nobody".
-+ 
-+ 	- To be honest, the "-b" option doesn't sanitise input very well
-+ 	  so don't setuid root the qpage binary or anything dumb like that.
-  
-  		Changes to QuickPage from v3.2 to v3.3
-  		---------------------------------------
-diff -crB a/qpage.c b/qpage.c
-*** a/qpage.c	1999-05-09 09:47:23.000000000 +1200
---- b/qpage.c	2011-01-21 14:50:55.995162759 +1300
-***************
-*** 17,22 ****
---- 17,23 ----
-  static char	sccsid[] = "@(#)qpage.c  3.36  07/26/98  tomiii@qpage.org";
-  #endif
-  char		*ConfigFile = NULL;
-+ char		*BindAddress = NULL;
-  int		Debug = 0;
-  int		Interactive = FALSE;
-  int		Silent = FALSE;
-***************
-*** 29,35 ****
-  do_version(void)
-  {
-  	printf("\n");
-! 	printf("QuickPage v%s, Copyright 1995-98 by Thomas Dwyer III\n",
-  		VERSION);
-  	printf("\n");
-  }
---- 30,36 ----
-  do_version(void)
-  {
-  	printf("\n");
-! 	printf("QuickPage v%s, Copyright 1995-98 by Thomas Dwyer III. Modified for Unleash by Michael Fincham <michael@unleash.co.nz>.\n",
-  		VERSION);
-  	printf("\n");
-  }
-***************
-*** 46,51 ****
---- 47,55 ----
-  	printf("\n");
-  	printf("Options:\n");
-  	printf("    -a [+]hhmm    send the page at the specified time\n");
-+ #ifndef CLIENT_ONLY
-+ 	printf("    -b address    bind only to this address (default: 0.0.0.0)\n");
-+ #endif
-  	printf("    -c coverage   coverage area (service name) for pager\n");
-  	printf("    -C config     use an alternate configuration file\n");
-  	printf("    -d            debug mode\n");
-***************
-*** 339,345 ****
-  
-  	(void)memset((char *)&p, 0, sizeof(p));
-  
-! 	while ((c = getopt(argc, argv, "a:c:C:df:hil:mp:P:q:Qs:t:v")) != -1) {
-  		switch (c) {
-  			case 'a':
-  			case 't':
---- 343,349 ----
-  
-  	(void)memset((char *)&p, 0, sizeof(p));
-  
-! 	while ((c = getopt(argc, argv, "a:b:c:C:df:hil:mp:P:q:Qs:t:v")) != -1) {
-  		switch (c) {
-  			case 'a':
-  			case 't':
-***************
-*** 353,358 ****
---- 357,367 ----
-  				needpager = TRUE;
-  				break;
-  
-+ #ifndef CLIENT_ONLY
-+ 			case 'b':
-+ 				BindAddress = strdup(optarg);
-+ 				break;
-+ #endif
-  			case 'c':
-  				my_free(coverage);
-  				coverage = strdup(optarg);
-***************
-*** 503,509 ****
-  		if (optind < argc)
-  			port = atoi(argv[optind]);
-  
-! 		(void)become_daemon(sleeptime, port);
-  
-  		/* NOT REACHED */
-  		return(-1);
---- 512,518 ----
-  		if (optind < argc)
-  			port = atoi(argv[optind]);
-  
-! 		(void)become_daemon(sleeptime, port, BindAddress);
-  
-  		/* NOT REACHED */
-  		return(-1);
-diff -crB a/qpage.h b/qpage.h
-*** a/qpage.h	1998-10-26 08:55:02.000000000 +1300
---- b/qpage.h	2011-01-21 14:51:22.682302352 +1300
-***************
-*** 26,32 ****
-  #define		fprintf			(void)fprintf
-  #endif
-  
-! #define		VERSION			"3.3"
-  #define		COMMENTS_ANYWHERE
-  
-  #ifndef		QPAGE_CONFIG
---- 26,32 ----
-  #define		fprintf			(void)fprintf
-  #endif
-  
-! #define		VERSION			"3.3.1-unleash"
-  #define		COMMENTS_ANYWHERE
-  
-  #ifndef		QPAGE_CONFIG
-***************
-*** 51,57 ****
-  #endif
-  
-  #ifndef		DAEMON_USER
-! #define		DAEMON_USER		"nobody"
-  #endif
-  
-  #define		SNPP_SVC_NAME		"snpp"
---- 51,57 ----
-  #endif
-  
-  #ifndef		DAEMON_USER
-! #define		DAEMON_USER		"qpage"
-  #endif
-  
-  #define		SNPP_SVC_NAME		"snpp"
-***************
-*** 278,284 ****
-  extern void		qpage_log(int pri, char *fmt, ...);
-  extern time_t		snpptime(char *arg);
-  extern time_t		parse_time(char *str);
-! extern int		become_daemon(int sleeptime, short port);
-  extern int		submit_page(PAGE *p, char *server);
-  extern int		lock_file(int fd, int mode, int block);
-  extern int		lock_queue(void);
---- 278,284 ----
-  extern void		qpage_log(int pri, char *fmt, ...);
-  extern time_t		snpptime(char *arg);
-  extern time_t		parse_time(char *str);
-! extern int		become_daemon(int sleeptime, short port, char *BindAddress);
-  extern int		submit_page(PAGE *p, char *server);
-  extern int		lock_file(int fd, int mode, int block);
-  extern int		lock_queue(void);
-diff -crB a/qpage.man b/qpage.man
-*** a/qpage.man	1999-05-09 10:07:31.000000000 +1200
---- b/qpage.man	2011-01-27 09:51:44.894302942 +1300
-***************
-*** 34,39 ****
---- 34,42 ----
-  ] [
-  .BI \-C " config
-  ]
-+ ] [
-+ .BI \-b " address
-+ ]
-  .BI \-q " interval
-  .SH DESCRIPTION
-  .B QuickPage
-***************
-*** 91,96 ****
---- 94,104 ----
-  century.  Otherwise assume the specified time is in the current
-  century.
-  .TP
-+ .BI \-b
-+ Specify an address for the qpage daemon to bind to. The default is
-+ to bind to INETADDR_ANY and listen on all interfaces (the old 
-+ behaviour)
-+ .TP
-  .BI \-c
-  Use a different coverage area or paging service.  This option is
-  only useful if the recipient has more than one pager and/or more
-diff -crB a/srvrsnpp.c b/srvrsnpp.c
-*** a/srvrsnpp.c	1998-10-26 08:55:05.000000000 +1300
---- b/srvrsnpp.c	2011-01-21 14:49:17.647300794 +1300
-***************
-*** 1156,1162 ****
-  **		-1 on error, otherwise never
-  */
-  int
-! become_daemon(int sleeptime, short port)
-  {
-  	struct sockaddr_in	addr;
-  	struct servent		*svc;
---- 1156,1162 ----
-  **		-1 on error, otherwise never
-  */
-  int
-! become_daemon(int sleeptime, short port, char *BindAddress)
-  {
-  	struct sockaddr_in	addr;
-  	struct servent		*svc;
-***************
-*** 1221,1227 ****
-  	len = sizeof(on);
-  	(void)setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, (char *)&on, len);
-  
-! 	addr.sin_addr.s_addr = INADDR_ANY;
-  	addr.sin_family = AF_INET;
-  	addr.sin_port = port;
-  
---- 1221,1227 ----
-  	len = sizeof(on);
-  	(void)setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, (char *)&on, len);
-  
-! 	addr.sin_addr.s_addr = BindAddress != NULL ? inet_addr(BindAddress) : INADDR_ANY;
-  	addr.sin_family = AF_INET;
-  	addr.sin_port = port;
-  
diff --git a/testing/qpage/qpage.post-install b/testing/qpage/qpage.post-install
deleted file mode 100644
index 53de3edbf5..0000000000
--- a/testing/qpage/qpage.post-install
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-mkdir -p /var/spool/qpage 2>/dev/null
-chown -R qpage:qpage /var/spool/qpage 2>/dev/null
-exit 0
-
diff --git a/testing/qpage/qpage.pre-install b/testing/qpage/qpage.pre-install
deleted file mode 100644
index c73b800dbd..0000000000
--- a/testing/qpage/qpage.pre-install
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-addgroup -S qpage 2>/dev/null
-adduser -S -D -h /var/lib/qpage -s /bin/false -G qpage -G qpage -g qpage qpage 2>/dev/null
-
-exit 0