summaryrefslogtreecommitdiffstats
path: root/ripngd
Commit message (Collapse)AuthorAgeFilesLines
* quagga: Remove double read of streamDonald Sharp2016-03-111-1/+3
| | | | | | | | | | The addition of a MIN(X,Y) with a stream_getc in the Y causes a double read of the stream due to the way that MIN is defined. This fix removes a crash in all protocols. Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* lib: Check prefix length from zebra is sensiblePaul Jakma2016-03-081-1/+1
| | | | | | | | | | | | | * zclient.c: prefix length on router-id and interface address add messages not sanity checked. fix. * */*_zebra.c: Prefix length on zebra route read was not checked, and clients use it to write to storage. An evil zebra could overflow client structures by sending overly long prefixlen. Prompted by discussions with: Donald Sharp <sharpd@cumulusnetworks.com>
* *: use an ifindex_t type, defined in lib/if.h, for ifindex valuesPaul Jakma2016-02-263-8/+8
|
* lib: zclient.c remove extern struct thread_master *Donald Sharp2015-10-273-4/+4
| | | | | | | | | | | | zclient.c depended upon link time inclusion of a extern struct thread_master *master. This is a violation of the namespace of the calling daemon. If a library needs the pointer pass it in and save it for future use. This code change also makes the zclient code consistent with the other lib functions that need to schedule work on your behalf Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* build: Remove the old PIC/PIE patch, let libtool sort it outPaul Jakma2015-09-031-2/+1
| | | | | | | * Remove the old change from '08 to add in PIE arguments at automake level. Versions of libtool since then know how to deal with -fpie and do the right thing according to whether its building shared or executable objects. So just pass '-fpie' as CFLAG and let libtool do its thing.
* Quagga: Fix code to use srandom/randomDonald Sharp2015-06-211-2/+2
| | | | | | | | Quagga was using a mix of srand/rand and srandom/random. Consolidate to use srandom/random which are the POSIX versions of random number generators Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* *: add VRF ID in the API message headerFeng Lu2015-06-033-43/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The API messages are used by zebra to exchange the interfaces, addresses, routes and router-id information with its clients. To distinguish which VRF the information belongs to, a new field "VRF ID" is added in the message header. And hence the message version is increased to 3. * The new field "VRF ID" in the message header: Length (2 bytes) Marker (1 byte) Version (1 byte) VRF ID (2 bytes, newly added) Command (2 bytes) - Client side: - zclient_create_header() adds the VRF ID in the message header. - zclient_read() extracts and validates the VRF ID from the header, and passes the VRF ID to the callback functions registered to the API messages. - All relative functions are appended with a new parameter "vrf_id", including all the callback functions. - "vrf_id" is also added to "struct zapi_ipv4" and "struct zapi_ipv6". Clients need to correctly set the VRF ID when using the API functions zapi_ipv4_route() and zapi_ipv6_route(). - Till now all messages sent from a client have the default VRF ID "0" in the header. - The HELLO message is special, which is used as the heart-beat of a client, and has no relation with VRF. The VRF ID in the HELLO message header will always be 0 and ignored by zebra. - Zebra side: - zserv_create_header() adds the VRF ID in the message header. - zebra_client_read() extracts and validates the VRF ID from the header, and passes the VRF ID to the functions which process the received messages. - All relative functions are appended with a new parameter "vrf_id". * Suppress the messages in a VRF which a client does not care: Some clients may not care about the information in the VRF X, and zebra should not send the messages in the VRF X to those clients. Extra flags are used to indicate which VRF is registered by a client, and a new message ZEBRA_VRF_UNREGISTER is introduced to let a client can unregister a VRF when it does not need any information in that VRF. A client sends any message other than ZEBRA_VRF_UNREGISTER in a VRF will automatically register to that VRF. - lib/vrf: A new utility "VRF bit-map" is provided to manage the flags for VRFs, one bit per VRF ID. - Use vrf_bitmap_init()/vrf_bitmap_free() to initialize/free a bit-map; - Use vrf_bitmap_set()/vrf_bitmap_unset() to set/unset a flag in the given bit-map, corresponding to the given VRF ID; - Use vrf_bitmap_check() to test whether the flag, in the given bit-map and for the given VRF ID, is set. - Client side: - In "struct zclient", the following flags are changed from "u_char" to "vrf_bitmap_t": redist[ZEBRA_ROUTE_MAX] default_information These flags are extended for each VRF, and controlled by the clients themselves (or with the help of zclient_redistribute() and zclient_redistribute_default()). - Zebra side: - In "struct zserv", the following flags are changed from "u_char" to "vrf_bitmap_t": redist[ZEBRA_ROUTE_MAX] redist_default ifinfo ridinfo These flags are extended for each VRF, as the VRF registration flags. They are maintained on receiving a ZEBRA_XXX_ADD or ZEBRA_XXX_DELETE message. When sending an interface/address/route/router-id message in a VRF to a client, if the corresponding VRF registration flag is not set, this message will not be dropped by zebra. - A new function zread_vrf_unregister() is introduced to process the new command ZEBRA_VRF_UNREGISTER. All the VRF registration flags are cleared for the requested VRF. Those clients, who support only the default VRF, will never receive a message in a non-default VRF, thanks to the filter in zebra. * New callback for the event of successful connection to zebra: - zclient_start() is splitted, keeping only the code of connecting to zebra. - Now zclient_init()=>zclient_connect()=>zclient_start() operations are purely dealing with the connection to zbera. - Once zebra is successfully connected, at the end of zclient_start(), a new callback is used to inform the client about connection. - Till now, in the callback of connect-to-zebra event, all clients send messages to zebra to request the router-id/interface/routes information in the default VRF. Of corse in future the client can do anything it wants in this callback. For example, it may send requests for both default VRF and some non-default VRFs. Signed-off-by: Feng Lu <lu.feng@6wind.com> Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
* *: call if_init()/if_terminate() from vrf_init()/vrf_terminate()Feng Lu2015-06-022-1/+3
| | | | | | | | | | | | | | | | | | Later, an interface will belong to a specific VRF, and the interface initialization will be a part of the VRF initialization. So now call if_init() from vrf_init(), and if_terminate() from vrf_terminate(). Daemons have the according changes: - if if_init() was called or "iflist" was initialized, now call vrf_init() instead; - if if_terminate() was called or "iflist" was destroyed, now call vrf_terminate() instead. Signed-off-by: Feng Lu <lu.feng@6wind.com> Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Vincent JARDIN <vincent.jardin@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* ripngd: allow to enable/disable the ECMP featureFeng Lu2015-05-273-5/+103
| | | | | | | | | | | | | | | | | | | | | | | | Introduce a new command "[no] allow-ecmp" to enable/disable the ECMP feature in RIPng. By default, ECMP is not allowed. Once ECMP is disabled, only one route entry can exist in the list. * ripng_zebra.c: adjust a debugging information, which shows the number of nexthops according to whether ECMP is enabled. * ripngd.c: ripng_ecmp_add() will reject the new route if ECMP is not allowed and some entry already exists. A new configurable command "allow-ecmp" is added to control whether ECMP is allowed. When ECMP is disabled, ripng_ecmp_disable() is called to remove the multiple nexthops. * ripngd.h: Add a new member "ecmp" to "struct ripng", indicating whether ECMP is allowed or not. Signed-off-by: Feng Lu <lu.feng@6wind.com> Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Vincent Jardin <vincent.jardin@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* ripngd: add ECMP supportFeng Lu2015-05-276-349/+459
| | | | | | | | | | | | | | | | | | | | | | | | * Each node in the routing table is changed into a list, holding the multiple equal-cost paths. * If one of the multiple entries gets less-preferred (greater metric or greater distance), it will be directly deleted instead of starting a garbage-collection timer for it. The garbage-collection timer is started only when the last entry in the list gets INFINITY. * Some new functions are used to maintain the ECMP list. And hence ripng_route_process(), ripng_redistribute_add() and ripng_timeout() are significantly simplified. * ripng_zebra_ipv6_add() and ripng_zebra_ipv6_delete() now can share the common code. The common part is moved to ripng_zebra_ipv6_send(). Signed-off-by: Feng Lu <lu.feng@6wind.com> Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Vincent Jardin <vincent.jardin@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* lib: fix "sockunion: add hash function" for BSD (9196caf)David Lamparter2015-05-201-11/+2
| | | | | | | | | | | | | The sockunion_hash() function uses s6_addr32, which is not defined on BSD systems. (It only works on glibc because we set _GNU_SOURCE) ripngd/ripng_nexthop.h already contains a workaround for this. Bump workaround to prefix.h so it's available everywhere. Reported-by: NetDEF CI System <mwinter@netdef.org> Fixes: 9196caf ("sockunion: add hash function") Cc: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* *: fix more initialisers (for BSD)David Lamparter2015-04-211-1/+1
| | | | | | | FreeBSD and NetBSD spew a few more warnings about variable initialisers. Found with OSR's/NetDEF's fancy new CI system. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* build: add --enable-werrorDavid Lamparter2015-04-211-1/+1
| | | | | | | | | | | | | | | This allows enabling -Werror in a consistent way. Note that this is different from just specifiying it in CFLAGS, since that would either break configure tests (if done on ./configure), or would override configure's CFLAGS (if done on make). Using --enable-werror instead provides a new WERROR variable that is additionally used during make with a consistent set of warning flags. The tests/ directory is exempt. (Rationale being, better to have more tests than pedantically complain about them.) Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* *: add/cleanup initialisersDavid Lamparter2015-04-211-1/+1
| | | | | | | | There were some (inconsequential) warnings about uninitialised use of variables. Also, in one case, sub-structs were mixed in initialisation, which doesn't quite work as intended. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* build: get rid of INCLUDES, use AM_CPPFLAGSDavid Lamparter2015-02-141-1/+1
| | | | | | | | | | | | INCLUDES in configure.ac was not used at all, and INCLUDES in Makefile.am is supposed to be AM_CPPFLAGS these days. Reduces warnings spewed during bootstrap/autoreconf. Signed-off-by: David Lamparter <equinox@opensourcerouting.org> Acked-by: Greg Troxel <gdt@ir.bbn.com> Acked-by: Feng Lu <lu.feng@6wind.com> Acked-by: Paul Jakma <paul@jakma.org>
* zebra, ripngd: remove ::/64 special-casingDavid Lamparter2015-02-141-18/+0
| | | | | | | | | | | | | | | | | In the 90ies, IPv4 was believed to exist within IPv6, with some kernels implementing this belief in code... Our code here is keyed to "#ifdef LINUX", yet no Linux from the past 10 years had this, making the code completely useless. FreeBSD 10.0 does in fact have a "::/96 via ::1 dev lo0 reject" route. IMHO we shouldn't mess with that, the admin can filter as neccessary anyway. Signed-off-by: David Lamparter <equinox@opensourcerouting.org> Acked-by: Greg Troxel <gdt@ir.bbn.com> Acked-by: Feng Lu <lu.feng@6wind.com> [DL: slightly adjusted commit message to remove misunderstanding] Acked-by: Paul Jakma <paul@jakma.org>
* build: remove INRIA, NRL and MUSICA IPv6 quirksDavid Lamparter2015-02-141-4/+4
| | | | | | | | | Valar dohaeris. Signed-off-by: David Lamparter <equinox@opensourcerouting.org> Acked-by: Greg Troxel <gdt@ir.bbn.com> Acked-by: Feng Lu <lu.feng@6wind.com> Acked-by: Paul Jakma <paul@jakma.org>
* ripng_nexthop: remove unused store to variablePaul Jakma2014-09-231-1/+0
|
* *: nuke ^L (page feed)David Lamparter2014-06-047-21/+21
| | | | | | | | | | | | | | Quagga sources have inherited a slew of Page Feed (^L, \xC) characters from ancient history. Among other things, these break patchwork's XML-RPC API because \xC is not a valid character in XML documents. Nuke them from high orbit. Patches can be adapted simply by: sed -e 's%^L%%' -i filename.patch (you can type page feeds in some environments with Ctrl-V Ctrl-L) Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* ripd & ripngd: avoid the zero interface metricLu Feng2014-06-031-1/+1
| | | | | | | | | | | The interface metric is initialized to 0 in the commit db19c85: zebra: set metric for directly connected routes via netlink to 0 Ripd and ripngd must be aware of it and avoid increase the route metric by 0. Signed-off-by: Feng Lu <lu.feng@6wind.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* lib/command.c: rewrite command matching/parsingChristian Franke2014-04-011-3/+0
| | | | | | | | | | Add support for keyword commands. Includes new documentation for DEFUN() in lib/command.h, for preexisting features as well as new keyword specification. Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* *: use array_size() helper macroBalaji.G2012-10-251-1/+1
| | | | | | | | Use the array_size() helper macro. Replaces several instances of local macros with the same definition. Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* build: use net-snmp-config to configure NetSNMPVincent Bernat2012-06-251-1/+1
| | | | | | | | The correct method to link to NetSNMP is to use net-snmp-config (which is like pkg-config). Explicit link to libcrypto is also dropped (NetSNMP libs are linked to libcrypto, no need to link Quagga to it). Moreover, @SNMP_INCLUDES@ is dropped because useless. Due to a bug in configure.ac, it was properly populated.
* build: allow configure and build in a separate directoryVincent Bernat2012-06-251-1/+1
| | | | | | | | | | | Some .h files in lib/ are autogenerated. The search path should include the build directory and the source directory. They usually match but sometimes, they may be different. For example: $ mkdir build $ cd build $ ../configure $ make
* ripngd: Replace redistribution strings with route_types.h defines.Matthieu Boutier2012-03-251-124/+74
|
* fix zebra protocol after MP-BGP changesDenis Ovsienko2012-01-231-0/+2
| | | | | | The previous commits modified both zebra and bgpd for additional SAFI field, but not any other routing daemon, which led to zebra daemon crashing with failed assertion.
* build: delete .cvsignore filesDenis Ovsienko2011-12-131-14/+0
|
* quagga: option "-z" ("--socket <path>") addedVyacheslav Trushkin2011-12-131-2/+7
| | | | | | | | | | | All daemons modified to support custom path to zserv socket. lib: generalize a zclient connection zclient_socket_connect added. zclient_socket and zclient_socket_un were hidden under static expression. "zclient_serv_path_set" modified.
* ripngd: limit max of "timers basic" to 65535 as documentedUlrich Weber2011-12-131-21/+3
| | | | and use VTY_GET_INTEGER_RANGE instead of calling strtoul
* IPv6 transport class suppportStephen Hemminger2011-10-171-0/+5
| | | | | | | | | | | | | | | | | | | | | IPv6 supports the same concept of differentiated service for routing protocols as IPv4, but like too many things, the standards committee decided that having two names for the same thing wasn't good enough and introduced a third more generic term transport class. The socket option to set transport class works the same as IPv4, but the arguments are different. * lib/sockopt.[ch] * setsockopt_ipv6_tclass(): new function * bgpd/bgp_network.c * bgp_connect(): set socket option * bgp_listener(): set socket option * ospf6d/ospf6_network.c * ospf6_set_transport_class(): new function * ospf6_serv_sock(): set socket option * ripngd/ripngd.c * ripng_make_socket(): set socket option
* ripngd: copy debug statements fix from ripdStephen Hemminger2011-03-132-17/+11
| | | | Doesn't ripng needs same fix as ripd.
* ripngd: compiler warnings cleanupStephen Hemminger2009-12-102-23/+13
| | | | | | | | | | * ripngd/ripng_interface.c * ripng_check_max_mtu(): unused, sayonara * ripng_interface_down(): cast flag arguments to logging function * ripng_interface_add(): idem * ripng_interface_delete(): idem * ripngd/ripngd.c * ripng_recv_packet(): avoid aliasing warning dereferencing pointer
* all: check return value from daemon() callStephen Hemminger2009-08-131-2/+5
| | | | | | * */*main.c: (main) Current versions of Gcc warn if the return value for daemon() is not checked. So add a simple test and exit on failure.
* [global] interface flags format warningsStephen Hemminger2009-07-281-5/+6
| | | | | */*: ifp->flags is 64 bit unsigned which can not be handled by %l on 32 bit architectures - requires %ll and the appropriate cast.
* [daemons/cleanup] Remove disabled log_mode argument support.Jeremy Jackson2009-06-181-6/+1
| | | | | * */*main.c: Seems that the actual code was removed previously, but the argument processing code remained.
* [cleanup] Make command nodes staticStephen Hemminger2009-06-124-4/+4
| | | | | The cmd_nodes used to configure vty, can mostly be static so (basic data hiding 101).
* [cleanup] Convert XMALLOC/memset to XCALLOCStephen Hemminger2009-06-122-7/+2
| | | | Simple conversion of XMALLOC/memset to XCALLOC
* [administrivia] Update gitignore filesPaul Jakma2008-08-221-1/+1
| | | | - Add more stuff, archive libraries, etc..
* [administrivia] Git should ignore backup files and .loT filesPaul Jakma2008-08-221-0/+3
|
* [trivia] Remove ChangeLog files, as this data is now maintained in SCMPaul Jakma2008-08-221-388/+0
|
* [trivia] finish off static'ification of ospf6d and ripngdPaul Jakma2008-08-2213-197/+214
| | | | | | | | | 2008-08-15 Paul Jakma <paul.jakma@sun.com> * {ospf6d,ripngd}/*: Finish job of marking functions as static, or exporting declarations for them, to quell warning noise with Quagga's GCC default high-level of warning flags. Thus allowing remaining, more useful warnings to be more easily seen.
* [build] Test for GNU-style PIE support in toolchain and enablePaul P Komkoff Jr2008-08-221-0/+3
| | | | | | | | | | | 2008-08-13 Paul P Komkoff Jr <i@stingr.net> * configure.ac: add a configure flag and autoconf macro, which will determine if your toolchain supports PIE. * */Makefile.am: add corresponding CFLAGS and LDFLAGS into appropriate places. Signed-off-by: Paul Jakma <paul@quagga.net>
* [administrivia] Add .gitignore files, based on .cvsignores.Paul Jakma2008-08-221-0/+14
|
* [daemons] Sanity check port number arguments before usePaul Jakma2008-05-291-1/+2
| | | | | | 2008-05-29 Martin Nagy <mnagy@redhat.com> * */*main.c: Sanity check port numbers before using.
* [ripd, ripngd] Remove useless code in rip_vty_out_uptime functionAndrew J. Schorr2007-04-272-3/+4
| | | | | | | | 2007-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ripd/ripd.c: (rip_vty_out_uptime) Remove unused variable timer_now. * ripngd/ripngd.c: (ripng_vty_out_uptime) Remove unused variable timer_now.
* Fix the display of some timers. (show ipv6 ripng and show ipv6 ripng status)Vincent Jardin2007-04-122-15/+10
|
* [daemon startup] Add --dry-run/-C argument to daemons, to check config file ↵Paul Jakma2006-10-151-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | syntax 2006-10-04 Oliver Hookins <ohookins@gmail.com> * bgpd/bgp_main.c: Add configuration check option, with '-C' rather than '-c' for consistency between daemons. * isisd/isis_main.c: ditto * ospf6d/ospf6_main.c: ditto * ospfd/ospf_main.c: ditto * ripngd/ripng_main.c: ditto * vtysh/vtysh_main.c: ditto * ripd/rip_main.c: Change the config check option to '-C' and tidy up the code. * zebra/main.c: ditto 2006-10-04 Stergiakis Alexandros <astergiakis@antcor.com> * ripd/rip_main.c: This trivial patch introduces a new command-line option '-c', which instructs zebra/ripd to check its configuration file for validity, print any error message, and then exit. This is useful when the configuration file is edited by hand or otherwise, and you simply want to validate it without any other effect. * zebra/main.c: ditto
* [ripngd] CID #72, remove unneeded NULL checkPaul Jakma2006-05-112-11/+14
| | | | | | | 2006-05-11 Paul Jakma <paul.jakma@sun.com> * ripng_interface.c: (ripng_interface_address_add) Remove unneeded NULL check, Coverity CID #72.
* [ripngd] bug #242, fix crash in routemap, ipv6 stored in in_addr.Paul Jakma2006-05-082-1/+7
| | | | | | | | 2006-05-08 Paul Jakma <paul.jakma@sun.com> * ripng_routemap.c: (route_set_ipv6_nexthop_local_compile) bug #242, s/in_addr/in6_addr to fix crash. Thanks to jithinvachery+quagga@gmail.com.
* [compiler] miscellaneous trivial compiler warning fixespaul2006-01-193-9/+10
| | | | | | | | | | | | | 2006-01-19 Paul Jakma <paul.jakma@sun.com> * (general) various miscellaneous compiler warning fixes. Remove redundant break statements from switch clauses which return. return from main, not exit, cause it annoys SOS. Remove stray semi-colons which cause empty-statement warnings. * zebra/main.c: (sighup) remove private declaration of external function.
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-02 18:42:59 +0000