Maemo: Added a basic debian package for charon.

5 files changed, 187 insertions, 0 deletions

diff --git a/packages/strongswan-maemo/debian/changelog b/packages/strongswan-maemo/debian/changelog
new file mode 100644
index 000000000..d08a22713
--- /dev/null
+++ b/packages/strongswan-maemo/debian/changelog
@@ -0,0 +1,6 @@
+strongswan (4.5.0-1) unstable; urgency=low
+
+  * Initial release
+
+ -- Tobias Brunner <tobias@strongswan.org>  Thu, 14 Oct 2010 17:31:43 +0200
+
diff --git a/packages/strongswan-maemo/debian/compat b/packages/strongswan-maemo/debian/compat
new file mode 100644
index 000000000..7ed6ff82d
--- /dev/null
+++ b/packages/strongswan-maemo/debian/compat
@@ -0,0 +1 @@
+5
diff --git a/packages/strongswan-maemo/debian/control b/packages/strongswan-maemo/debian/control
new file mode 100644
index 000000000..6b0da5e86
--- /dev/null
+++ b/packages/strongswan-maemo/debian/control
@@ -0,0 +1,13 @@
+Source: strongswan
+Section: user/network
+Priority: extra
+Maintainer: Tobias Brunner <tobias@strongswan.org>
+Build-Depends: debhelper (>= 5), autotools-dev
+Standards-Version: 3.7.2
+
+Package: strongswan
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: strongSwan IKEv2 VPN
+ strongSwan is an IKEv2/IPsec-based VPN solution.
+
diff --git a/packages/strongswan-maemo/debian/copyright b/packages/strongswan-maemo/debian/copyright
new file mode 100644
index 000000000..615fac701
--- /dev/null
+++ b/packages/strongswan-maemo/debian/copyright
@@ -0,0 +1,8 @@
+Format-Specification: http://wiki.debian.org/Proposals/CopyrightFormat?action=recall&rev=437
+Upstream-Name: strongSwan
+Upstream-Source: http://download.strongswan.org
+Files: debian/*
+License: GPL-2
+ On Debian systems the full text of the GNU General Public License can be found
+ in the `/usr/share/common-licenses/GPL-2' file.
+
diff --git a/packages/strongswan-maemo/debian/rules b/packages/strongswan-maemo/debian/rules
new file mode 100755
index 000000000..41482be43
--- /dev/null
+++ b/packages/strongswan-maemo/debian/rules
@@ -0,0 +1,159 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+#
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+#
+# Modified to make a template file for a multi-binary package with separated
+# build-arch and build-indep targets  by Bill Allombert 2001
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# This has to be exported to make some magic below work.
+export DH_OPTIONS
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+CONFIG_OPTIONS = \
+	--prefix=/usr --sysconfdir=/etc \
+	--disable-pluto --disable-tools --disable-scripts \
+	--disable-updown --disable-stroke \
+	--disable-sha1 --disable-sha2 --disable-aes --disable-des \
+	--disable-md5 --disable-gmp --disable-pgp --disable-dnskey \
+	--enable-openssl --enable-monolithic --enable-eap-identity \
+	--enable-eap-md5 --enable-eap-mschapv2 --enable-maemo
+
+CFLAGS = -Wall -g -Wno-format -Wno-pointer-sign -Wno-strict-aliasing -Wno-sign-compare -Wno-unused-parameter
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+	CFLAGS += -O0
+else
+	CFLAGS += -O2
+endif
+
+ifeq (,$(filter nostrip,$(DEB_BUILD_OPTIONS)))
+	INSTALL_PROGRAM += -s
+endif
+
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+	NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+	MAKEFLAGS += -j$(NUMJOBS)
+endif
+
+# Use hardware floating point
+ifneq (,$(findstring vfp,$(DEB_BUILD_OPTIONS)))
+	CFLAGS += -mfpu=vfp -mfloat-abi=softfp
+endif
+
+config.status: configure
+	dh_testdir
+	./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info $(CONFIG_OPTIONS) CFLAGS="$(CFLAGS)" 
+	#LDFLAGS="-Wl,-z,defs"
+
+
+#Architecture 
+build: build-arch build-indep
+
+build-arch: build-arch-stamp
+build-arch-stamp:  config.status
+
+	# Add here commands to compile the arch part of the package.
+	#$(MAKE) 
+	touch $@
+
+build-indep: build-indep-stamp
+build-indep-stamp:  config.status
+
+	# Add here commands to compile the indep part of the package.
+	#$(MAKE) doc
+	touch $@
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-arch-stamp build-indep-stamp #CONFIGURE-STAMP#
+
+	# Add here commands to clean up after the build process.
+	-$(MAKE) distclean
+ifneq "$(wildcard /usr/share/misc/config.sub)" ""
+	cp -f /usr/share/misc/config.sub config.sub
+endif
+ifneq "$(wildcard /usr/share/misc/config.guess)" ""
+	cp -f /usr/share/misc/config.guess config.guess
+endif
+
+
+	dh_clean 
+
+install: install-indep install-arch
+install-indep:
+	dh_testdir
+	dh_testroot
+	dh_clean -k -i 
+	dh_installdirs -i
+
+	# Add here commands to install the indep part of the package into
+	# debian/<package>-doc.
+	#INSTALLDOC#
+
+	dh_install -i
+
+install-arch:
+	dh_testdir
+	dh_testroot
+	dh_clean -k -s 
+	dh_installdirs -s
+
+	# Add here commands to install the arch part of the package into 
+	# debian/tmp.
+	$(MAKE) DESTDIR=$(CURDIR)/debian/strongswan install
+
+	dh_install -s
+# Must not depend on anything. This is to be called by
+# binary-arch/binary-indep
+# in another 'make' thread.
+binary-common:
+	dh_testdir
+	dh_testroot
+	dh_installchangelogs NEWS
+	dh_installdocs
+	dh_installexamples
+#	dh_installmenu
+#	dh_installdebconf	
+#	dh_installlogrotate	
+#	dh_installemacsen
+#	dh_installpam
+#	dh_installmime
+#	dh_python
+#	dh_installinit
+#	dh_installcron
+#	dh_installinfo
+	dh_installman
+	dh_link
+	dh_strip
+	dh_compress 
+	dh_fixperms
+#	dh_perl
+	dh_makeshlibs
+	dh_installdeb
+	dh_shlibdeps
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+# Build architecture independant packages using the common target.
+binary-indep: build-indep install-indep
+	$(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
+
+# Build architecture dependant packages using the common target.
+binary-arch: build-arch install-arch
+	$(MAKE) -f debian/rules DH_OPTIONS=-s binary-common
+
+binary: binary-arch binary-indep
+.PHONY: build clean binary-indep binary-arch binary install install-indep install-arch