added ikev1/ip-two-pools scenario

13 files changed, 350 insertions, 0 deletions

diff --git a/testing/tests/ikev1/ip-two-pools/description.txt b/testing/tests/ikev1/ip-two-pools/description.txt
new file mode 100644
index 000000000..45b84f135
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/description.txt
@@ -0,0 +1,9 @@
+The hosts <b>alice</b> and <b>carol</b> set up a tunnel connection each to gateway <b>moon</b>.
+Both hosts request a <b>virtual IP</b> via the IKEv2 configuration payload by using the
+<b>leftsourceip=%config</b> parameter. Gateway <b>moon</b> assigns virtual IP
+addresses from a simple pool defined by <b>rightsourceip=10.3.0.0/28</b> to hosts connecting
+to the <b>eth0</b> (PH_IP_MOON) interface and virtual IP addresses from a simple pool defined 
+by <b>rightsourceip=10.4.0.0/28</b> to hosts connecting to the <b>eth1</b> (PH_IP_MOON1) interface.
+<p>
+Thus <b>carol</b> is assigned <b>PH_IP_CAROL1</b> whereas <b>alice</b> gets <b>10.4.0.1</b> and 
+both ping the gateway <b>moon</b>.
diff --git a/testing/tests/ikev1/ip-two-pools/evaltest.dat b/testing/tests/ikev1/ip-two-pools/evaltest.dat
new file mode 100644
index 000000000..2f19a77ba
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/evaltest.dat
@@ -0,0 +1,18 @@
+carol::ipsec status::home.*IPsec SA established::YES
+alice::ipsec status::home.*IPsec SA established::YES
+moon::ipsec status::ext.*carol@strongswan.org.*erouted::YES
+moon::ipsec status::int.*alice@strongswan.org.*erouted::YES
+moon::cat /var/log/auth.log::adding virtual IP address pool.*int.*10.4.0.0/28::YES
+moon::cat /var/log/auth.log::adding virtual IP address pool.*ext.*10.3.0.0/28::YES
+moon::ipsec leases ext::1/15, 1 online::YES
+moon::ipsec leases int::1/15, 1 online::YES
+moon::ipsec leases ext 10.3.0.1::carol@strongswan.org::YES
+moon::ipsec leases int 10.4.0.1::alice@strongswan.org::YES
+carol::cat /var/log/auth.log::setting virtual IP source address to 10.3.0.1::YES
+alice::cat /var/log/auth.log::setting virtual IP source address to 10.4.0.1::YES
+carol::ping -c 1 PH_IP_MOON::64 bytes from PH_IP_MOON: icmp_seq=1::YES
+alice::ping -c 1 PH_IP_MOON1::64 bytes from PH_IP_MOON1: icmp_seq=1::YES
+carol::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP::YES
+carol::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP::YES
+alice::tcpdump::IP alice.strongswan.org > moon1.strongswan.org: ESP::YES
+alice::tcpdump::IP moon1.strongswan.org > alice.strongswan.org: ESP::YES
diff --git a/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/init.d/iptables b/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/init.d/iptables
new file mode 100755
index 000000000..97b773645
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/init.d/iptables
@@ -0,0 +1,78 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+opts="start stop reload"
+
+depend() {
+	before net
+	need logger
+}
+
+start() {
+	ebegin "Starting firewall"
+
+	# default policy is DROP
+	/sbin/iptables -P INPUT DROP
+	/sbin/iptables -P OUTPUT DROP
+	/sbin/iptables -P FORWARD DROP
+
+        # allow ESP 
+        iptables -A INPUT  -i eth0 -p 50 -j ACCEPT
+        iptables -A OUTPUT -o eth0 -p 50 -j ACCEPT
+
+	# allow IKE
+        iptables -A INPUT  -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
+        iptables -A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
+			
+	# allow MOBIKE 
+	iptables -A INPUT  -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
+
+
+	# allow crl fetch from winnetou
+	iptables -A INPUT  -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
+
+	# allow ssh
+	iptables -A INPUT  -p tcp --dport 22 -j ACCEPT
+	iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT
+
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping firewall"
+		for a in `cat /proc/net/ip_tables_names`; do
+			/sbin/iptables -F -t $a
+			/sbin/iptables -X -t $a
+	
+			if [ $a == nat ]; then
+				/sbin/iptables -t nat -P PREROUTING ACCEPT
+				/sbin/iptables -t nat -P POSTROUTING ACCEPT
+				/sbin/iptables -t nat -P OUTPUT ACCEPT
+			elif [ $a == mangle ]; then
+				/sbin/iptables -t mangle -P PREROUTING ACCEPT
+				/sbin/iptables -t mangle -P INPUT ACCEPT
+				/sbin/iptables -t mangle -P FORWARD ACCEPT
+				/sbin/iptables -t mangle -P OUTPUT ACCEPT
+				/sbin/iptables -t mangle -P POSTROUTING ACCEPT
+			elif [ $a == filter ]; then
+				/sbin/iptables -t filter -P INPUT ACCEPT
+				/sbin/iptables -t filter -P FORWARD ACCEPT
+				/sbin/iptables -t filter -P OUTPUT ACCEPT
+			fi
+		done
+	eend $?
+}
+
+reload() {
+	ebegin "Flushing firewall"
+		for a in `cat /proc/net/ip_tables_names`; do
+			/sbin/iptables -F -t $a
+			/sbin/iptables -X -t $a
+		done;
+        eend $?
+	start
+}
+
diff --git a/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/ipsec.conf b/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/ipsec.conf
new file mode 100755
index 000000000..e8077b22a
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/ipsec.conf
@@ -0,0 +1,24 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+        crlcheckinterval=180
+	strictcrlpolicy=no
+	charonstart=no
+	plutodebug=control
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev1
+		
+conn home 
+	left=%defaultroute
+	leftsourceip=%config
+	leftcert=aliceCert.pem
+	leftid=alice@strongswan.org
+	leftfirewall=yes
+	right=PH_IP_MOON1
+	rightid=@moon.strongswan.org
+	auto=add
diff --git a/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/strongswan.conf b/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/strongswan.conf
new file mode 100644
index 000000000..ba5dbdd1d
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/hosts/alice/etc/strongswan.conf
@@ -0,0 +1,11 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+pluto {
+  load = sha1 sha2 md5 aes des hmac pem pkcs1 x509 gmp random curl
+}
+
+# pluto uses optimized DH exponent sizes (RFC 3526)
+
+libstrongswan {
+  dh_exponent_ansi_x9_42 = no
+}
diff --git a/testing/tests/ikev1/ip-two-pools/hosts/carol/etc/ipsec.conf b/testing/tests/ikev1/ip-two-pools/hosts/carol/etc/ipsec.conf
new file mode 100755
index 000000000..99a8c60ff
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/hosts/carol/etc/ipsec.conf
@@ -0,0 +1,24 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	crlcheckinterval=180
+	strictcrlpolicy=no
+	charonstart=no
+	plutodebug=control
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev1
+
+conn home
+	left=PH_IP_CAROL
+	leftsourceip=%config
+	leftcert=carolCert.pem
+	leftid=carol@strongswan.org
+	leftfirewall=yes
+	right=PH_IP_MOON
+	rightid=@moon.strongswan.org
+	auto=add
diff --git a/testing/tests/ikev1/ip-two-pools/hosts/carol/etc/strongswan.conf b/testing/tests/ikev1/ip-two-pools/hosts/carol/etc/strongswan.conf
new file mode 100644
index 000000000..ba5dbdd1d
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/hosts/carol/etc/strongswan.conf
@@ -0,0 +1,11 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+pluto {
+  load = sha1 sha2 md5 aes des hmac pem pkcs1 x509 gmp random curl
+}
+
+# pluto uses optimized DH exponent sizes (RFC 3526)
+
+libstrongswan {
+  dh_exponent_ansi_x9_42 = no
+}
diff --git a/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/init.d/iptables b/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/init.d/iptables
new file mode 100755
index 000000000..bb9d03acd
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/init.d/iptables
@@ -0,0 +1,91 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+opts="start stop reload"
+
+depend() {
+	before net
+	need logger
+}
+
+start() {
+	ebegin "Starting firewall"
+
+	# enable IP forwarding
+	echo 1 > /proc/sys/net/ipv4/ip_forward
+	
+	# default policy is DROP
+	/sbin/iptables -P INPUT DROP
+	/sbin/iptables -P OUTPUT DROP
+	/sbin/iptables -P FORWARD DROP
+
+	# allow esp
+	iptables -A INPUT  -i eth0 -p 50 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p 50 -j ACCEPT
+        iptables -A INPUT  -i eth1 -p 50 -j ACCEPT
+        iptables -A OUTPUT -o eth1 -p 50 -j ACCEPT
+
+	# allow IKE
+	iptables -A INPUT  -i eth0 -p udp --sport 500 --dport 500 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p udp --dport 500 --sport 500 -j ACCEPT
+        iptables -A INPUT  -i eth1 -p udp --sport 500 --dport 500 -j ACCEPT
+        iptables -A OUTPUT -o eth1 -p udp --dport 500 --sport 500 -j ACCEPT
+
+	# allow MobIKE
+	iptables -A INPUT  -i eth0 -p udp --sport 4500 --dport 4500 -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p udp --dport 4500 --sport 4500 -j ACCEPT
+        iptables -A INPUT  -i eth1 -p udp --sport 4500 --dport 4500 -j ACCEPT
+        iptables -A OUTPUT -o eth1 -p udp --dport 4500 --sport 4500 -j ACCEPT
+
+	# allow crl fetch from winnetou
+	iptables -A INPUT  -i eth0 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
+	iptables -A OUTPUT -o eth0 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
+	iptables -A FORWARD -i eth0 -o eth1 -p tcp --sport 80 -s PH_IP_WINNETOU -j ACCEPT
+	iptables -A FORWARD -o eth0 -i eth1 -p tcp --dport 80 -d PH_IP_WINNETOU -j ACCEPT
+
+	# masquerade crl fetches to winnetou
+	iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -d PH_IP_WINNETOU -j MASQUERADE
+
+	# allow ssh
+	iptables -A INPUT  -p tcp --dport 22 -j ACCEPT
+	iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT
+
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping firewall"
+		for a in `cat /proc/net/ip_tables_names`; do
+			/sbin/iptables -F -t $a
+			/sbin/iptables -X -t $a
+	
+			if [ $a == nat ]; then
+				/sbin/iptables -t nat -P PREROUTING ACCEPT
+				/sbin/iptables -t nat -P POSTROUTING ACCEPT
+				/sbin/iptables -t nat -P OUTPUT ACCEPT
+			elif [ $a == mangle ]; then
+				/sbin/iptables -t mangle -P PREROUTING ACCEPT
+				/sbin/iptables -t mangle -P INPUT ACCEPT
+				/sbin/iptables -t mangle -P FORWARD ACCEPT
+				/sbin/iptables -t mangle -P OUTPUT ACCEPT
+				/sbin/iptables -t mangle -P POSTROUTING ACCEPT
+			elif [ $a == filter ]; then
+				/sbin/iptables -t filter -P INPUT ACCEPT
+				/sbin/iptables -t filter -P FORWARD ACCEPT
+				/sbin/iptables -t filter -P OUTPUT ACCEPT
+			fi
+		done
+	eend $?
+}
+
+reload() {
+	ebegin "Flushing firewall"
+		for a in `cat /proc/net/ip_tables_names`; do
+			/sbin/iptables -F -t $a
+			/sbin/iptables -X -t $a
+		done;
+        eend $?
+	start
+}
+
diff --git a/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/ipsec.conf b/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/ipsec.conf
new file mode 100755
index 000000000..4771e26d6
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/ipsec.conf
@@ -0,0 +1,28 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	crlcheckinterval=180
+	strictcrlpolicy=no
+	charonstart=no
+	plutodebug=control
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	keyexchange=ikev1
+	leftcert=moonCert.pem
+	leftid=@moon.strongswan.org
+	leftfirewall=yes
+	right=%any
+
+conn int 
+	left=PH_IP_MOON1
+	rightsourceip=10.4.0.0/28
+	auto=add
+
+conn ext 
+	left=PH_IP_MOON
+	rightsourceip=10.3.0.0/28
+	auto=add
diff --git a/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/strongswan.conf b/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/strongswan.conf
new file mode 100644
index 000000000..ba5dbdd1d
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/hosts/moon/etc/strongswan.conf
@@ -0,0 +1,11 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+pluto {
+  load = sha1 sha2 md5 aes des hmac pem pkcs1 x509 gmp random curl
+}
+
+# pluto uses optimized DH exponent sizes (RFC 3526)
+
+libstrongswan {
+  dh_exponent_ansi_x9_42 = no
+}
diff --git a/testing/tests/ikev1/ip-two-pools/posttest.dat b/testing/tests/ikev1/ip-two-pools/posttest.dat
new file mode 100644
index 000000000..4474e5ade
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/posttest.dat
@@ -0,0 +1,12 @@
+alice::ipsec stop
+moon::ipsec stop
+carol::ipsec stop
+moon::/etc/init.d/iptables stop 2> /dev/null
+carol::/etc/init.d/iptables stop 2> /dev/null
+alice::/etc/init.d/iptables stop 2> /dev/null
+carol::ip addr del 10.3.0.1/32 dev eth0
+alice::ip addr del 10.4.0.1/32 dev eth0
+moon::ip route del 10.3.0.0/16 via 192.168.0.1
+moon::ip route del 10.4.0.0/16 via 10.1.0.1
+moon::conntrack -F
+moon::rm /etc/ipsec.d/ipsec.*
diff --git a/testing/tests/ikev1/ip-two-pools/pretest.dat b/testing/tests/ikev1/ip-two-pools/pretest.dat
new file mode 100644
index 000000000..8091a6ed2
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/pretest.dat
@@ -0,0 +1,12 @@
+moon::ip route add 10.3.0.0/16 via 192.168.0.1
+moon::ip route add 10.4.0.0/16 via 10.1.0.1
+moon::/etc/init.d/iptables start 2> /dev/null
+carol::/etc/init.d/iptables start 2> /dev/null
+alice::/etc/init.d/iptables start 2> /dev/null
+carol::ipsec start
+moon::ipsec start
+alice::ipsec start
+carol::sleep 2 
+carol::ipsec up home
+alice::ipsec up home
+alice::sleep 1 
diff --git a/testing/tests/ikev1/ip-two-pools/test.conf b/testing/tests/ikev1/ip-two-pools/test.conf
new file mode 100644
index 000000000..329774c0a
--- /dev/null
+++ b/testing/tests/ikev1/ip-two-pools/test.conf
@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# UML instances used for this test
+
+# All UML instances that are required for this test
+#
+UMLHOSTS="alice moon carol winnetou"
+
+# Corresponding block diagram
+#
+DIAGRAM="a-m-c-w.png"
+
+# UML instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="alice carol"
+
+# UML instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="alice moon carol"